/***************************************************************************
 *             __________               __   ___.
 *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
 *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
 *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
 *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
 *                     \/            \/     \/    \/            \/
 * $Id$
 *
 * Copyright (C) 2002 by Alan Korr
 *
 * All files in this archive are subject to the GNU General Public License.
 * See the file COPYING in the source tree root for full license agreement.
 *
 * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
 * KIND, either express or implied.
 *
 ****************************************************************************/

#include <stdbool.h>
#include "system.h"

#define LCDR (PBDR_ADDR+1)

#ifdef HAVE_LCD_CHARCELLS
#define LCD_DS  1 // PB0 = 1 --- 0001 ---  LCD-DS
#define LCD_CS  2 // PB1 = 1 --- 0010 --- /LCD-CS
#define LCD_SD  4 // PB2 = 1 --- 0100 ---  LCD-SD
#define LCD_SC  8 // PB3 = 1 --- 1000 ---  LCD-SC
#else
#define LCD_SD  1 // PB0 = 1 --- 0001
#define LCD_SC  2 // PB1 = 1 --- 0010
#define LCD_RS  4 // PB2 = 1 --- 0100
#define LCD_CS  8 // PB3 = 1 --- 1000
#define LCD_DS LCD_RS
#endif

/*
 * About /CS,DS,SC,SD
 * ------------------
 *
 * LCD on JBP and JBR uses a SPI protocol to receive orders (SDA and SCK lines)
 *
 * - /CS -> Chip Selection line :
 *            0 : LCD chipset is activated.
 * -  DS -> Data Selection line, latched at the rising edge
 *          of the 8th serial clock (*) :
 *            0 : instruction register,
 *            1 : data register; 
 * -  SC -> Serial Clock line (SDA).
 * -  SD -> Serial Data line (SCK), latched at the rising edge
 *          of each serial clock (*).  
 *
 *    _                                                          _
 * /CS \                                                        /
 *      \______________________________________________________/
 *    _____  ____  ____  ____  ____  ____  ____  ____  ____  _____ 
 *  SD     \/ D7 \/ D6 \/ D5 \/ D4 \/ D3 \/ D2 \/ D1 \/ D0 \/
 *    _____/\____/\____/\____/\____/\____/\____/\____/\____/\_____
 *
 *    _____     _     _     _     _     _     _     _     ________ 
 *  SC     \   * \   * \   * \   * \   * \   * \   * \   *
 *          \_/   \_/   \_/   \_/   \_/   \_/   \_/   \_/
 *    _  _________________________________________________________ 
 *  DS \/                                                  
 *    _/\_________________________________________________________
 *
 */

/*
 * The only way to do logical operations in an atomic way
 * on SH1 is using :
 *
 *   or.b/and.b/tst.b/xor.b #imm,@(r0,gbr)
 *
 * but GCC doesn't generate them at all so some assembly
 * codes are needed here.
 *
 * The Global Base Register gbr is expected to be zero
 * and r0 is the address of one register in the on-chip
 * peripheral module.
 *
 */ 

void lcd_write(bool command, int byte) __attribute__ ((section (".icode")));
void lcd_write(bool command, int byte)
{
    asm("and.b %0, @(r0,gbr)"
         :
         : /* %0 */ "I"(~(LCD_CS|LCD_DS|LCD_SD|LCD_SC)),
           /* %1 */ "z"(LCDR));

    if (command)
        asm ("shll8 %0\n"
             "0:      \n\t"
             "and.b %2,@(r0,gbr)\n\t"
             "shll  %0\n\t"  
             "bf    1f\n\t"
             "or.b  %3,@(r0,gbr)\n"
             "1:      \n\t"
             "or.b  %4,@(r0,gbr)\n"
             "add   #-1,%1\n\t"
             "cmp/pl %1\n\t"
             "bt    0b"
             :
             : /* %0 */ "r"(((unsigned)byte)<<16),
             /* %1 */ "r"(8),
             /* %2 */ "I"(~(LCD_SC|LCD_SD|LCD_DS)),
             /* %3 */ "I"(LCD_SD),
             /* %4 */ "I"(LCD_SC),
             /* %5 */ "z"(LCDR));
    else
        asm ("shll8  %0\n"
             "0:       \n\t"
             "and.b  %2, @(r0,gbr)\n\t"
             "shll   %0\n\t"  
             "bf     1f\n\t"
             "or.b   %3, @(r0,gbr)\n"
             "1:       \n\t"
             "or.b   %4, @(r0,gbr)\n"
             "and.b  %2, @(r0,gbr)\n\t"
             "shll   %0\n\t"  
             "bf     1f\n\t"
             "or.b   %3, @(r0,gbr)\n"
             "1:       \n\t"
             "or.b   %4, @(r0,gbr)\n"
             "and.b  %2, @(r0,gbr)\n\t"
             "shll   %0\n\t"  
             "bf     1f\n\t"
             "or.b   %3, @(r0,gbr)\n"
             "1:       \n\t"
             "or.b   %4, @(r0,gbr)\n"
             "and.b  %2, @(r0,gbr)\n\t"
             "shll   %0\n\t"  
             "bf     1f\n\t"
             "or.b   %3, @(r0,gbr)\n"
             "1:       \n\t"
             "or.b   %4, @(r0,gbr)\n"
             "and.b  %2, @(r0,gbr)\n\t"
             "shll   %0\n\t"  
             "bf     1f\n\t"
             "or.b   %3, @(r0,gbr)\n"
             "1:       \n\t"
             "or.b   %4, @(r0,gbr)\n"
             "and.b  %2, @(r0,gbr)\n\t"
             "shll   %0\n\t"  
             "bf     1f\n\t"
             "or.b   %3, @(r0,gbr)\n"
             "1:       \n\t"
             "or.b   %4, @(r0,gbr)\n"
             "and.b  %2, @(r0,gbr)\n\t"
             "shll   %0\n\t"  
             "bf     1f\n\t"
             "or.b   %3, @(r0,gbr)\n"
             "1:       \n\t"
             "or.b   %4, @(r0,gbr)\n"
             "and.b  %2, @(r0,gbr)\n\t"
             "shll   %0\n\t"  
             "bf     1f\n\t"
             "or.b   %3, @(r0,gbr)\n"
             "1:       \n\t"
             "or.b   %4, @(r0,gbr)\n"
             :
             : /* %0 */ "r"(((unsigned)byte)<<16),
             /* %1 */ "r"(8),
             /* %2 */ "I"(~(LCD_SC|LCD_SD)),
             /* %3 */ "I"(LCD_SD|LCD_DS),
             /* %4 */ "I"(LCD_SC|LCD_DS),
             /* %5 */ "z"(LCDR));

    asm("or.b %0, @(r0,gbr)"
         :
         : /* %0 */ "I"(LCD_CS|LCD_DS|LCD_SD|LCD_SC),
           /* %1 */ "z"(LCDR));
}