/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2007 by Karl Kurbjun * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include "inttypes.h" #include "string.h" #include "cpu.h" #include "system.h" #include "lcd.h" #include "kernel.h" #include "thread.h" #include "storage.h" #include "fat.h" #include "disk.h" #include "font.h" #include "adc.h" #include "backlight.h" #include "backlight-target.h" #include "button.h" #include "panic.h" #include "power.h" #include "file.h" #include "common.h" #include "rbunicode.h" #include "usb.h" #include "spi.h" #include "uart-target.h" #include "tsc2100.h" #include "time.h" #include "system-arm.h" #define MRDEBUG #if defined(MRDEBUG) extern int line; #if 0 struct touch_calibration_point tl, br; void touchscreen_get_one_point(struct touch_calibration_point *p) { int data = 0; int start = current_tick; while (TIME_AFTER(start+(HZ/3), current_tick)) { if (button_read_device()&BUTTON_TOUCHSCREEN) { data = button_get_last_touch(); p->val_x = data>>16; p->val_y = data&0xffff; start = current_tick; } else if (data == 0) start = current_tick; } } #define MARGIN 25 #define LEN 7 void touchscreen_calibrate_screen(void) { reset_screen(); printf("touch the center of the crosshairs to calibrate"); /* get the topleft value */ lcd_hline(MARGIN-LEN, MARGIN+LEN, MARGIN); lcd_vline(MARGIN, MARGIN-LEN, MARGIN+LEN); lcd_update(); tl.px_x = MARGIN; tl.px_y = MARGIN; touchscreen_get_one_point(&tl); reset_screen(); printf("touch the center of the crosshairs to calibrate"); /* get the topright value */ lcd_hline(LCD_WIDTH-MARGIN-LEN, LCD_WIDTH-MARGIN+LEN, LCD_HEIGHT-MARGIN); lcd_vline(LCD_WIDTH-MARGIN, LCD_HEIGHT-MARGIN-LEN, LCD_HEIGHT-MARGIN+LEN); lcd_update(); br.px_x = LCD_WIDTH-MARGIN; br.px_y = LCD_HEIGHT-MARGIN; touchscreen_get_one_point(&br); reset_screen(); line++; printf("tl %d %d", tl.val_x, tl.val_y); printf("br %d %d", br.val_x, br.val_y); line++; set_calibration_points(&tl, &br); } #endif static uint8_t bl_command[] = {0xa4, 0x00, 0x00, 0xbb}; int brightness = 0; void mrdebug(void) { int button=0; #if 0 use_calibration(false); touchscreen_calibrate_screen(); use_calibration(true); #endif while(true) { #if 0 struct tm *t = get_time(); printf("%d:%d:%d %d %d %d", t->tm_hour, t->tm_min, t->tm_sec, t->tm_mday, t->tm_mon, t->tm_year); printf("time: %d", mktime(t)); #endif button = button_get(false); if (button == BUTTON_POWER) { printf("reset"); IO_GIO_BITSET1|=1<<10; } if (button==BUTTON_RC_VOL_DOWN) { brightness = (brightness - 5) & 0x7f; bl_command[2] = brightness; spi_block_transfer(SPI_target_BACKLIGHT, bl_command, 4, 0, 0); } else if (button==BUTTON_RC_VOL_UP) { brightness = (brightness + 5) & 0x7f; bl_command[2] = brightness; spi_block_transfer(SPI_target_BACKLIGHT, bl_command, 4, 0, 0); } // { // short x,y,z1,z2; // tsc2100_read_values(&x, &y, &z1, &z2); // printf("x: %04x y: %04x z1: %04x z2: %04x", x, y, z1, z2); // printf("tsadc: %4x", tsc2100_readreg(TSADC_PAGE, TSADC_ADDRESS)&0xffff); // // tsc2100_keyclick(); /* doesnt work :( */ // line -= 6; // } else if (button == BUTTON_RC_HEART) { printf("POINT"); touchscreen_set_mode(TOUCHSCREEN_POINT); } else if (button == BUTTON_RC_MODE) { printf("BUTTON"); touchscreen_set_mode(TOUCHSCREEN_BUTTON); } #if 1 else if (button&BUTTON_TOUCHSCREEN) { if (button&BUTTON_REL) continue; unsigned int data = button_get_data(); int x = (data&0xffff0000)>>16, y = data&0x0000ffff; reset_screen(); line = 9; printf("BB: %x %d %d", button, x,y); lcd_hline(x-5, x+5, y); lcd_vline(x, y-5, y+5); lcd_update(); } else if (button == BUTTON_RC_PLAY) { reset_screen(); } else if (button) { // if (button&BUTTON_REL) { printf("%08x %s\n", button, (button&BUTTON_REL)?"yes":"no"); } } #endif } } #endif void main(void) { unsigned char* loadbuffer; int buffer_size; int rc; int(*kernel_entry)(void); power_init(); lcd_init(); system_init(); kernel_init(); enable_irq(); enable_fiq(); adc_init(); button_init(); backlight_init(); font_init(); lcd_setfont(FONT_SYSFIXED); /* Show debug messages if button is pressed */ // if(button_read_device()) verbose = true; printf("Rockbox boot loader"); printf("Version %s", APPSVERSION); usb_init(); /* Enter USB mode without USB thread */ if(usb_detect() == USB_INSERTED) { const char msg[] = "Bootloader USB mode"; reset_screen(); lcd_putsxy( (LCD_WIDTH - (SYSFONT_WIDTH * strlen(msg))) / 2, (LCD_HEIGHT - SYSFONT_HEIGHT) / 2, msg); lcd_update(); ide_power_enable(true); storage_enable(false); sleep(HZ/20); usb_enable(true); while (usb_detect() == USB_INSERTED) { storage_spin(); /* Prevent the drive from spinning down */ sleep(HZ); } usb_enable(false); reset_screen(); lcd_update(); } #if defined(MRDEBUG) mrdebug(); #endif printf("ATA"); rc = storage_init(); if(rc) { reset_screen(); error(EATA, rc); } printf("disk"); disk_init(); printf("mount"); rc = disk_mount_all(); if (rc<=0) { error(EDISK,rc); } printf("Loading firmware"); loadbuffer = (unsigned char*) 0x00900000; buffer_size = (unsigned char*)0x01900000 - loadbuffer; rc = load_firmware(loadbuffer, BOOTFILE, buffer_size); if(rc < 0) error(EBOOTFILE, rc); if (rc == EOK) { kernel_entry = (void*) loadbuffer; rc = kernel_entry(); } }