/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2005 Michiel van der Kolk, Jens Arnold * * All files in this archive are subject to the GNU General Public License. * See the file COPYING in the source tree root for full license agreement. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include "rockmacros.h" #include "fb.h" #include "input.h" #include "rc.h" #include "lcd-gb.h" #include "hw.h" #include "config.h" #if (CONFIG_KEYPAD == IPOD_4G_PAD) #define ROCKBOY_PAD_LEFT BUTTON_LEFT #define ROCKBOY_PAD_RIGHT BUTTON_RIGHT #define ROCKBOY_PAD_UP BUTTON_MENU #define ROCKBOY_PAD_DOWN BUTTON_PLAY #else #define ROCKBOY_PAD_LEFT BUTTON_LEFT #define ROCKBOY_PAD_RIGHT BUTTON_RIGHT #define ROCKBOY_PAD_UP BUTTON_UP #define ROCKBOY_PAD_DOWN BUTTON_DOWN #endif rcvar_t joy_exports[] = { RCV_END }; rcvar_t vid_exports[] = { RCV_END }; struct fb fb; extern int debug_trace; void vid_settitle(char *title) { rb->splash(HZ/2, true, title); } void joy_init(void) { } void joy_close(void) { } unsigned int oldbuttonstate = 0, newbuttonstate,holdbutton; int released, pressed; void ev_poll(void) { event_t ev; newbuttonstate = rb->button_status(); released = ~newbuttonstate & oldbuttonstate; pressed = newbuttonstate & ~oldbuttonstate; oldbuttonstate = newbuttonstate; #if CONFIG_KEYPAD == IRIVER_H100_PAD if (rb->button_hold()&~holdbutton) fb.mode=(fb.mode+1)%4; holdbutton=rb->button_hold(); #elif CONFIG_KEYPAD == RECORDER_PAD if (pressed & BUTTON_ON) fb.mode=(fb.mode+1)%4; #endif if(released) { ev.type = EV_RELEASE; if(released & ROCKBOY_PAD_LEFT) { ev.code=PAD_LEFT; ev_postevent(&ev); } if(released & ROCKBOY_PAD_RIGHT) {ev.code=PAD_RIGHT; ev_postevent(&ev);} if(released & ROCKBOY_PAD_DOWN) { ev.code=PAD_DOWN; ev_postevent(&ev); } if(released & ROCKBOY_PAD_UP) { ev.code=PAD_UP; ev_postevent(&ev); } if(released & options.A) { ev.code=PAD_A; ev_postevent(&ev); } if(released & options.B) { ev.code=PAD_B; ev_postevent(&ev); } if(released & options.START) { ev.code=PAD_START; ev_postevent(&ev); } if(released & options.SELECT) { ev.code=PAD_SELECT; ev_postevent(&ev); } } if(pressed) { /* button press */ ev.type = EV_PRESS; if(pressed & ROCKBOY_PAD_LEFT) { ev.code=PAD_LEFT; ev_postevent(&ev); } if(pressed & ROCKBOY_PAD_RIGHT) { ev.code=PAD_RIGHT; ev_postevent(&ev);} if(pressed & ROCKBOY_PAD_DOWN) { ev.code=PAD_DOWN; ev_postevent(&ev); } if(pressed & ROCKBOY_PAD_UP) { ev.code=PAD_UP; ev_postevent(&ev); } if(pressed & options.A) { ev.code=PAD_A; ev_postevent(&ev); } if(pressed & options.B) { ev.code=PAD_B; ev_postevent(&ev); } if(pressed & options.START) { ev.code=PAD_START; ev_postevent(&ev); } if(pressed & options.SELECT) { ev.code=PAD_SELECT; ev_postevent(&ev); } if(pressed & options.MENU) { #if (CONFIG_KEYPAD == IRIVER_H100_PAD) || \ (CONFIG_KEYPAD == IRIVER_H300_PAD) || \ (CONFIG_KEYPAD == IPOD_4G_PAD) if (do_user_menu() == USER_MENU_QUIT) #endif { die(""); cleanshut=1; } } } } void vid_setpal(int i, int r, int g, int b) { (void)i; (void)r; (void)g; (void)b; } inline void vid_begin(void) // New frameskip, makes more sense to me and performs as well { static int skip = 0; if (skiplcd_framebuffer; #if defined(HAVE_LCD_COLOR) fb.pelsize=2; // 16 bit framebuffer fb.indexed = 0; // no palette on lcd fb.cc[0].r = 3; // 8-5 (wasted bits on red) fb.cc[0].l = 11; //this is the offset to the R bits (16-5) fb.cc[1].r = 2; // 8-6 (wasted bits on green) fb.cc[1].l = 5; // This is the offset to the G bits (16-5-6) fb.cc[2].r = 3; // 8-5 (wasted bits on red) fb.cc[2].l = 0; // This is the offset to the B bits (16-5-6-5) fb.cc[3].r = 0; // no alpha fb.cc[3].l = 0; fb.yuv = 0; // not in yuv format #else // ***** NEED TO LOOK INTO THIS MORE FOR THE H100 (Should be able to get rid of some IFDEF's elsewhere) fb.pelsize=1; // 8 bit framebuffer.. (too much.. but lowest gnuboy will support.. so yea... #endif } #if LCD_HEIGHT<144 fb_data *frameb; void vid_update(int scanline) { register int cnt=0; int scanline_remapped; #if (LCD_HEIGHT == 64) && (LCD_DEPTH == 1) /* Archos */ int balance = 0; if (fb.mode==1) scanline-=16; else if (fb.mode==2) scanline-=8; scanline_remapped = scanline / 16; frameb = rb->lcd_framebuffer + scanline_remapped * LCD_WIDTH; while (cnt < 160) { balance += LCD_WIDTH; if (balance > 0) { #if (CONFIG_CPU == SH7034) && !defined(SIMULATOR) asm volatile ( "mov.b @%0,r0 \n" "add %1,%0 \n" "tst #0x02, r0 \n" /* ~bit 1 */ "rotcr r1 \n" "mov.b @%0,r0 \n" "add %1,%0 \n" "tst #0x02, r0 \n" /* ~bit 1 */ "rotcr r1 \n" "mov.b @%0,r0 \n" "add %1,%0 \n" "tst #0x02, r0 \n" /* ~bit 1 */ "rotcr r1 \n" "mov.b @%0,r0 \n" "add %1,%0 \n" "tst #0x02, r0 \n" /* ~bit 1 */ "rotcr r1 \n" "mov.b @%0,r0 \n" "add %1,%0 \n" "tst #0x02, r0 \n" /* ~bit 1 */ "rotcr r1 \n" "mov.b @%0,r0 \n" "add %1,%0 \n" "tst #0x02, r0 \n" /* ~bit 1 */ "rotcr r1 \n" "mov.b @%0,r0 \n" "add %1,%0 \n" "tst #0x02, r0 \n" /* ~bit 1 */ "rotcr r1 \n" "mov.b @%0,r0 \n" "add %1,%0 \n" "tst #0x02, r0 \n" /* ~bit 1 */ "rotcr r1 \n" "shlr16 r1 \n" "shlr8 r1 \n" "not r1,r1 \n" /* account for negated bits */ "mov.b r1,@%2 \n" : /* outputs */ : /* inputs */ /* %0 */ "r"(scan.buf[0] + cnt), /* %1 */ "r"(256), /* scan.buf line length */ /* %2 */ "r"(frameb++) : /* clobbers */ "r0", "r1" ); #else register unsigned scrbyte = 0; if (scan.buf[0][cnt] & 0x02) scrbyte |= 0x01; if (scan.buf[1][cnt] & 0x02) scrbyte |= 0x02; if (scan.buf[2][cnt] & 0x02) scrbyte |= 0x04; if (scan.buf[3][cnt] & 0x02) scrbyte |= 0x08; if (scan.buf[4][cnt] & 0x02) scrbyte |= 0x10; if (scan.buf[5][cnt] & 0x02) scrbyte |= 0x20; if (scan.buf[6][cnt] & 0x02) scrbyte |= 0x40; if (scan.buf[7][cnt] & 0x02) scrbyte |= 0x80; *(frameb++) = scrbyte; #endif balance -= 160; } cnt ++; } rb->lcd_update_rect(0, (scanline/2) & ~7, LCD_WIDTH, 8); #elif (LCD_HEIGHT == 128) && (LCD_DEPTH == 2) /* iriver H1x0 */ if (fb.mode==1) scanline-=16; else if (fb.mode==2) scanline-=8; scanline_remapped = scanline / 4; frameb = rb->lcd_framebuffer + scanline_remapped * LCD_WIDTH; while (cnt < 160) { *(frameb++) = (scan.buf[0][cnt]&0x3) | ((scan.buf[1][cnt]&0x3)<<2) | ((scan.buf[2][cnt]&0x3)<<4) | ((scan.buf[3][cnt]&0x3)<<6); cnt++; } rb->lcd_update_rect(0, scanline & ~3, LCD_WIDTH, 4); #elif defined(HAVE_LCD_COLOR) /* iriver H3x0, colour iPod */ // handled in lcd.c now #endif /* LCD_HEIGHT */ } #endif void vid_end(void) { } long timerresult; void *sys_timer(void) {/* timerresult=*rb->current_tick; return &timerresult;*/ return 0; } // returns microseconds passed since sys_timer int sys_elapsed(long *oldtick) { /* int elap,mytime=microtick; elap=mytime-*oldtick; *oldtick=mytime; return elap;*/ // return ((*rb->current_tick-(*oldtick))*1000000)/HZ; return *oldtick; } void sys_sleep(int us) { if(us<=0) return; int i=0; while(i< us*11) i++; // if (us <= 0) return; }