/*************************************************************************** * __________ __ ___. * Open \______ \ ____ ____ | | _\_ |__ _______ ___ * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ * \/ \/ \/ \/ \/ * $Id$ * * Copyright (C) 2005 Miika Pekkarinen * * All files in this archive are subject to the GNU General Public License. * See the file COPYING in the source tree root for full license agreement. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * ****************************************************************************/ #include "config.h" #include #include #include #include #include "dsp.h" #include "eq.h" #include "kernel.h" #include "playback.h" #include "system.h" #include "settings.h" #include "replaygain.h" #include "misc.h" #include "debug.h" #ifndef SIMULATOR #include #endif /* 16-bit samples are scaled based on these constants. The shift should be * no more than 15. */ #define WORD_SHIFT 12 #define WORD_FRACBITS 27 #define NATIVE_DEPTH 16 #define SAMPLE_BUF_COUNT 256 #define RESAMPLE_BUF_COUNT (256 * 4) /* Enough for 11,025 Hz -> 44,100 Hz*/ #define DEFAULT_GAIN 0x01000000 struct dsp_config { long codec_frequency; /* Sample rate of data coming from the codec */ long frequency; /* Effective sample rate after pitch shift (if any) */ long clip_min; long clip_max; long track_gain; long album_gain; long track_peak; long album_peak; long replaygain; int sample_depth; int sample_bytes; int stereo_mode; int frac_bits; bool dither_enabled; long dither_bias; long dither_mask; bool new_gain; bool crossfeed_enabled; bool eq_enabled; long eq_precut; long gain; /* Note that this is in S8.23 format. */ }; struct resample_data { long phase, delta; int32_t last_sample[2]; }; struct dither_data { long error[3]; long random; }; struct crossfeed_data { int32_t gain; /* Direct path gain */ int32_t coefs[3]; /* Coefficients for the shelving filter */ int32_t history[4]; /* Format is x[n - 1], y[n - 1] for both channels */ int32_t delay[13][2]; int index; /* Current index into the delay line */ }; /* Current setup is one lowshelf filters, three peaking filters and one highshelf filter. Varying the number of shelving filters make no sense, but adding peaking filters is possible. */ struct eq_state { char enabled[5]; /* Flags for active filters */ struct eqfilter filters[5]; }; static struct dsp_config dsp_conf[2] IBSS_ATTR; static struct dither_data dither_data[2] IBSS_ATTR; static struct resample_data resample_data[2] IBSS_ATTR; struct crossfeed_data crossfeed_data IBSS_ATTR; static struct eq_state eq_data; static int pitch_ratio = 1000; static int channels_mode = 0; static int32_t sw_gain, sw_cross; extern int current_codec; static struct dsp_config *dsp; /* The internal format is 32-bit samples, non-interleaved, stereo. This * format is similar to the raw output from several codecs, so the amount * of copying needed is minimized for that case. */ static int32_t sample_buf[SAMPLE_BUF_COUNT] IBSS_ATTR; static int32_t resample_buf[RESAMPLE_BUF_COUNT] IBSS_ATTR; int sound_get_pitch(void) { return pitch_ratio; } void sound_set_pitch(int permille) { pitch_ratio = permille; dsp_configure(DSP_SWITCH_FREQUENCY, dsp->codec_frequency); } /* Convert at most count samples to the internal format, if needed. Returns * number of samples ready for further processing. Updates src to point * past the samples "consumed" and dst is set to point to the samples to * consume. Note that for mono, dst[0] equals dst[1], as there is no point * in processing the same data twice. */ static int convert_to_internal(const char* src[], int count, int32_t* dst[]) { count = MIN(SAMPLE_BUF_COUNT / 2, count); if ((dsp->sample_depth <= NATIVE_DEPTH) || (dsp->stereo_mode == STEREO_INTERLEAVED)) { dst[0] = &sample_buf[0]; dst[1] = (dsp->stereo_mode == STEREO_MONO) ? dst[0] : &sample_buf[SAMPLE_BUF_COUNT / 2]; } else { dst[0] = (int32_t*) src[0]; dst[1] = (int32_t*) ((dsp->stereo_mode == STEREO_MONO) ? src[0] : src[1]); } if (dsp->sample_depth <= NATIVE_DEPTH) { short* s0 = (short*) src[0]; int32_t* d0 = dst[0]; int32_t* d1 = dst[1]; int scale = WORD_SHIFT; int i; if (dsp->stereo_mode == STEREO_INTERLEAVED) { for (i = 0; i < count; i++) { *d0++ = *s0++ << scale; *d1++ = *s0++ << scale; } } else if (dsp->stereo_mode == STEREO_NONINTERLEAVED) { short* s1 = (short*) src[1]; for (i = 0; i < count; i++) { *d0++ = *s0++ << scale; *d1++ = *s1++ << scale; } } else { for (i = 0; i < count; i++) { *d0++ = *s0++ << scale; } } } else if (dsp->stereo_mode == STEREO_INTERLEAVED) { int32_t* s0 = (int32_t*) src[0]; int32_t* d0 = dst[0]; int32_t* d1 = dst[1]; int i; for (i = 0; i < count; i++) { *d0++ = *s0++; *d1++ = *s0++; } } if (dsp->stereo_mode == STEREO_NONINTERLEAVED) { src[0] += count * dsp->sample_bytes; src[1] += count * dsp->sample_bytes; } else if (dsp->stereo_mode == STEREO_INTERLEAVED) { src[0] += count * dsp->sample_bytes * 2; } else { src[0] += count * dsp->sample_bytes; } return count; } static void resampler_set_delta(int frequency) { resample_data[current_codec].delta = (unsigned long) frequency * 65536LL / NATIVE_FREQUENCY; } /* Linear interpolation resampling that introduces a one sample delay because * of our inability to look into the future at the end of a frame. */ /* TODO: we really should have a separate set of resample functions for both mono and stereo to avoid all this internal branching and looping. */ static int downsample(int32_t **dst, int32_t **src, int count, struct resample_data *r) { long phase = r->phase; long delta = r->delta; int32_t last_sample; int32_t *d[2] = { dst[0], dst[1] }; int pos = phase >> 16; int i = 1, j; int num_channels = dsp->stereo_mode == STEREO_MONO ? 1 : 2; for (j = 0; j < num_channels; j++) { last_sample = r->last_sample[j]; /* Do we need last sample of previous frame for interpolation? */ if (pos > 0) last_sample = src[j][pos - 1]; /* Be sure starting position isn't passed the available data */ if (pos < count) *d[j]++ = last_sample + FRACMUL((phase & 0xffff) << 15, src[j][pos] - last_sample); else { /* No samples can be output here since were already passed the end. Keep phase, save the last sample and return nothing. */ i = 0; goto done; } } phase += delta; while ((pos = phase >> 16) < count) { for (j = 0; j < num_channels; j++) *d[j]++ = src[j][pos - 1] + FRACMUL((phase & 0xffff) << 15, src[j][pos] - src[j][pos - 1]); phase += delta; i++; } /* Wrap phase accumulator back to start of next frame. */ done: r->phase = phase - (count << 16); r->last_sample[0] = src[0][count - 1]; r->last_sample[1] = src[1][count - 1]; return i; } static long upsample(int32_t **dst, int32_t **src, int count, struct resample_data *r) { long phase = r->phase; long delta = r->delta; int32_t *d[2] = { dst[0], dst[1] }; int i = 0, j; int pos; int num_channels = dsp->stereo_mode == STEREO_MONO ? 1 : 2; while ((phase >> 16) == 0) { for (j = 0; j < num_channels; j++) *d[j]++ = r->last_sample[j] + FRACMUL((phase & 0xffff) << 15, src[j][0] - r->last_sample[j]); phase += delta; i++; } while ((pos = phase >> 16) < count) { for (j = 0; j < num_channels; j++) *d[j]++ = src[j][pos - 1] + FRACMUL((phase & 0xffff) << 15, src[j][pos] - src[j][pos - 1]); phase += delta; i++; } /* Wrap phase accumulator back to start of next frame. */ r->phase = phase - (count << 16); r->last_sample[0] = src[0][count - 1]; r->last_sample[1] = src[1][count - 1]; return i; } /* Resample count stereo samples. Updates the src array, if resampling is * done, to refer to the resampled data. Returns number of stereo samples * for further processing. */ static inline int resample(int32_t* src[], int count) { long new_count; if (dsp->frequency != NATIVE_FREQUENCY) { int32_t* dst[2] = {&resample_buf[0], &resample_buf[RESAMPLE_BUF_COUNT / 2]}; if (dsp->frequency < NATIVE_FREQUENCY) { new_count = upsample(dst, src, count, &resample_data[current_codec]); } else { new_count = downsample(dst, src, count, &resample_data[current_codec]); } src[0] = dst[0]; if (dsp->stereo_mode != STEREO_MONO) src[1] = dst[1]; else src[1] = dst[0]; } else { new_count = count; } return new_count; } static inline long clip_sample(int32_t sample, int32_t min, int32_t max) { if (sample > max) { sample = max; } else if (sample < min) { sample = min; } return sample; } /* The "dither" code to convert the 24-bit samples produced by libmad was * taken from the coolplayer project - coolplayer.sourceforge.net */ void dsp_dither_enable(bool enable) { dsp->dither_enabled = enable; } static void dither_init(void) { memset(&dither_data[0], 0, sizeof(struct dither_data)); memset(&dither_data[1], 0, sizeof(struct dither_data)); dsp->dither_bias = (1L << (dsp->frac_bits - NATIVE_DEPTH)); dsp->dither_mask = (1L << (dsp->frac_bits + 1 - NATIVE_DEPTH)) - 1; } static void dither_samples(int32_t* src, int num, struct dither_data* dither) { int32_t output, sample; int32_t random; int32_t min, max; long mask = dsp->dither_mask; long bias = dsp->dither_bias; int i; for (i = 0; i < num; ++i) { /* Noise shape and bias */ sample = src[i]; sample += dither->error[0] - dither->error[1] + dither->error[2]; dither->error[2] = dither->error[1]; dither->error[1] = dither->error[0]/2; output = sample + bias; /* Dither */ random = dither->random*0x0019660dL + 0x3c6ef35fL; output += (random & mask) - (dither->random & mask); dither->random = random; /* Clip and quantize */ min = dsp->clip_min; max = dsp->clip_max; if (output > max) { output = max; if (sample > max) sample = max; } else if (output < min) { output = min; if (sample < min) sample = min; } output &= ~mask; /* Error feedback */ dither->error[0] = sample - output; src[i] = output; } } void dsp_set_crossfeed(bool enable) { dsp->crossfeed_enabled = enable; } void dsp_set_crossfeed_direct_gain(int gain) { /* Work around bug in get_replaygain_int which returns 0 for 0 dB */ if (gain == 0) crossfeed_data.gain = 0x7fffffff; else crossfeed_data.gain = get_replaygain_int(gain * -10) << 7; } void dsp_set_crossfeed_cross_params(long lf_gain, long hf_gain, long cutoff) { long g1 = get_replaygain_int(lf_gain * -10) << 3; long g2 = get_replaygain_int(hf_gain * -10) << 3; filter_bishelf_coefs(0xffffffff/NATIVE_FREQUENCY*cutoff, g1, g2, crossfeed_data.coefs); } /* Applies crossfeed to the stereo signal in src. * Crossfeed is a process where listening over speakers is simulated. This * is good for old hard panned stereo records, which might be quite fatiguing * to listen to on headphones with no crossfeed. */ #ifndef DSP_HAVE_ASM_CROSSFEED static void apply_crossfeed(int32_t* src[], int count) { int32_t *hist_l = &crossfeed_data.history[0]; int32_t *hist_r = &crossfeed_data.history[2]; int32_t *delay = &crossfeed_data.delay[0][0]; int32_t *coefs = &crossfeed_data.coefs[0]; int32_t gain = crossfeed_data.gain; int di = crossfeed_data.index; int32_t acc; int32_t left, right; int i; for (i = 0; i < count; i++) { left = src[0][i]; right = src[1][i]; /* Filter delayed sample from left speaker */ ACC_INIT(acc, delay[di*2], coefs[0]); ACC(acc, hist_l[0], coefs[1]); ACC(acc, hist_l[1], coefs[2]); /* Save filter history for left speaker */ hist_l[1] = GET_ACC(acc); hist_l[0] = delay[di*2]; /* Filter delayed sample from right speaker */ ACC_INIT(acc, delay[di*2 + 1], coefs[0]); ACC(acc, hist_r[0], coefs[1]); ACC(acc, hist_r[1], coefs[2]); /* Save filter history for right speaker */ hist_r[1] = GET_ACC(acc); hist_r[0] = delay[di*2 + 1]; delay[di*2] = left; delay[di*2 + 1] = right; /* Now add the attenuated direct sound and write to outputs */ src[0][i] = FRACMUL(left, gain) + hist_r[1]; src[1][i] = FRACMUL(right, gain) + hist_l[1]; /* Wrap delay line index if bigger than delay line size */ if (++di > 12) di = 0; } /* Write back local copies of data we've modified */ crossfeed_data.index = di; } #endif /* Combine all gains to a global gain. */ static void set_gain(void) { dsp->gain = DEFAULT_GAIN; if (dsp->replaygain) { dsp->gain = dsp->replaygain; } if (dsp->eq_enabled && dsp->eq_precut) { dsp->gain = (long) (((int64_t) dsp->gain * dsp->eq_precut) >> 24); } if (dsp->gain == DEFAULT_GAIN) { dsp->gain = 0; } else { dsp->gain >>= 1; } } /** * Use to enable the equalizer. * * @param enable true to enable the equalizer */ void dsp_set_eq(bool enable) { dsp->eq_enabled = enable; } /** * Update the amount to cut the audio before applying the equalizer. * * @param precut to apply in decibels (multiplied by 10) */ void dsp_set_eq_precut(int precut) { dsp->eq_precut = get_replaygain_int(precut * -10); set_gain(); } /** * Synchronize the equalizer filter coefficients with the global settings. * * @param band the equalizer band to synchronize */ void dsp_set_eq_coefs(int band) { const int *setting; long gain; unsigned long cutoff, q; /* Adjust setting pointer to the band we actually want to change */ setting = &global_settings.eq_band0_cutoff + (band * 3); /* Convert user settings to format required by coef generator functions */ cutoff = 0xffffffff / NATIVE_FREQUENCY * (*setting++); q = *setting++; gain = *setting++; if (q == 0) q = 1; /* NOTE: The coef functions assume the EMAC unit is in fractional mode, which it should be, since we're executed from the main thread. */ /* Assume a band is disabled if the gain is zero */ if (gain == 0) { eq_data.enabled[band] = 0; } else { if (band == 0) eq_ls_coefs(cutoff, q, gain, eq_data.filters[band].coefs); else if (band == 4) eq_hs_coefs(cutoff, q, gain, eq_data.filters[band].coefs); else eq_pk_coefs(cutoff, q, gain, eq_data.filters[band].coefs); eq_data.enabled[band] = 1; } } /* Apply EQ filters to those bands that have got it switched on. */ static void eq_process(int32_t **x, unsigned num) { int i; unsigned int channels = dsp->stereo_mode != STEREO_MONO ? 2 : 1; unsigned shift; /* filter configuration currently is 1 low shelf filter, 3 band peaking filters and 1 high shelf filter, in that order. we need to know this so we can choose the correct shift factor. */ for (i = 0; i < 5; i++) { if (eq_data.enabled[i]) { if (i == 0 || i == 4) /* shelving filters */ shift = EQ_SHELF_SHIFT; else shift = EQ_PEAK_SHIFT; eq_filter(x, &eq_data.filters[i], num, channels, shift); } } } /* Apply a constant gain to the samples (e.g., for ReplayGain). May update * the src array if gain was applied. * Note that this must be called before the resampler. */ static void apply_gain(int32_t* _src[], int _count) { if (dsp->gain) { int32_t** src = _src; int count = _count; int32_t* s0 = src[0]; int32_t* s1 = src[1]; long gain = dsp->gain; int32_t s; int i; int32_t *d; if (s0 != s1) { d = &sample_buf[SAMPLE_BUF_COUNT / 2]; src[1] = d; s = *s1++; for (i = 0; i < count; i++) FRACMUL_8_LOOP(s, gain, s1, d); } else { src[1] = &sample_buf[0]; } d = &sample_buf[0]; src[0] = d; s = *s0++; for (i = 0; i < count; i++) FRACMUL_8_LOOP(s, gain, s0, d); } } void channels_set(int value) { channels_mode = value; } void stereo_width_set(int value) { long width, straight, cross; width = value * 0x7fffff / 100; if (value <= 100) { straight = (0x7fffff + width) / 2; cross = straight - width; } else { /* straight = (1 + width) / (2 * width) */ straight = ((int64_t)(0x7fffff + width) << 22) / width; cross = straight - 0x7fffff; } sw_gain = straight << 8; sw_cross = cross << 8; } /* Implements the different channel configurations and stereo width. * We might want to combine this with the write_samples stage for efficiency, * but for now we'll just let it stay as a stage of its own. */ static void channels_process(int32_t **src, int num) { int i; int32_t *sl = src[0], *sr = src[1]; if (channels_mode == SOUND_CHAN_STEREO) return; switch (channels_mode) { case SOUND_CHAN_MONO: for (i = 0; i < num; i++) sl[i] = sr[i] = sl[i]/2 + sr[i]/2; break; case SOUND_CHAN_CUSTOM: for (i = 0; i < num; i++) { int32_t left_sample = sl[i]; sl[i] = FRACMUL(sl[i], sw_gain) + FRACMUL(sr[i], sw_cross); sr[i] = FRACMUL(sr[i], sw_gain) + FRACMUL(left_sample, sw_cross); } break; case SOUND_CHAN_MONO_LEFT: for (i = 0; i < num; i++) sr[i] = sl[i]; break; case SOUND_CHAN_MONO_RIGHT: for (i = 0; i < num; i++) sl[i] = sr[i]; break; case SOUND_CHAN_KARAOKE: for (i = 0; i < num; i++) { int32_t left_sample = sl[i]/2; sl[i] = left_sample - sr[i]/2; sr[i] = sr[i]/2 - left_sample; } break; } } static void write_samples(short* dst, int32_t* src[], int count) { int32_t* s0 = src[0]; int32_t* s1 = src[1]; int scale = dsp->frac_bits + 1 - NATIVE_DEPTH; if (dsp->dither_enabled) { dither_samples(src[0], count, &dither_data[0]); dither_samples(src[1], count, &dither_data[1]); while (count-- > 0) { *dst++ = (short) (*s0++ >> scale); *dst++ = (short) (*s1++ >> scale); } } else { long min = dsp->clip_min; long max = dsp->clip_max; while (count-- > 0) { *dst++ = (short) (clip_sample(*s0++, min, max) >> scale); *dst++ = (short) (clip_sample(*s1++, min, max) >> scale); } } } /* Process and convert src audio to dst based on the DSP configuration, * reading count number of audio samples. dst is assumed to be large * enough; use dsp_output_count() to get the required number. src is an * array of pointers; for mono and interleaved stereo, it contains one * pointer to the start of the audio data and the other is ignored; for * non-interleaved stereo, it contains two pointers, one for each audio * channel. Returns number of bytes written to dst. */ int dsp_process(char *dst, const char *src[], int count) { int32_t* tmp[2]; int written = 0; int samples; #if defined(CPU_COLDFIRE) && !defined(SIMULATOR) /* set emac unit for dsp processing, and save old macsr, we're running in codec thread context at this point, so can't clobber it */ unsigned long old_macsr = coldfire_get_macsr(); coldfire_set_macsr(EMAC_FRACTIONAL | EMAC_SATURATE); #endif dsp = &dsp_conf[current_codec]; dsp_set_replaygain(false); while (count > 0) { samples = convert_to_internal(src, count, tmp); count -= samples; apply_gain(tmp, samples); samples = resample(tmp, samples); if (samples <= 0) break; /* I'm pretty sure we're downsampling here */ if (dsp->crossfeed_enabled && dsp->stereo_mode != STEREO_MONO) apply_crossfeed(tmp, samples); if (dsp->eq_enabled) eq_process(tmp, samples); if (dsp->stereo_mode != STEREO_MONO) channels_process(tmp, samples); write_samples((short*) dst, tmp, samples); written += samples; dst += samples * sizeof(short) * 2; yield(); } #if defined(CPU_COLDFIRE) && !defined(SIMULATOR) /* set old macsr again */ coldfire_set_macsr(old_macsr); #endif return written; } /* Given count number of input samples, calculate the maximum number of * samples of output data that would be generated (the calculation is not * entirely exact and rounds upwards to be on the safe side; during * resampling, the number of samples generated depends on the current state * of the resampler). */ /* dsp_input_size MUST be called afterwards */ int dsp_output_count(int count) { dsp = &dsp_conf[current_codec]; if (dsp->frequency != NATIVE_FREQUENCY) { count = (int)(((unsigned long)count * NATIVE_FREQUENCY + (dsp->frequency - 1)) / dsp->frequency); } /* Now we have the resampled sample count which must not exceed * RESAMPLE_BUF_COUNT/2 to avoid resample buffer overflow. One * must call dsp_input_count() to get the correct input sample * count. */ if (count > RESAMPLE_BUF_COUNT/2) count = RESAMPLE_BUF_COUNT/2; return count; } /* Given count output samples, calculate number of input samples * that would be consumed in order to fill the output buffer. */ int dsp_input_count(int count) { dsp = &dsp_conf[current_codec]; /* count is now the number of resampled input samples. Convert to original input samples. */ if (dsp->frequency != NATIVE_FREQUENCY) { /* Use the real resampling delta = * dsp->frequency * 65536 / NATIVE_FREQUENCY, and * round towards zero to avoid buffer overflows. */ count = (int)(((unsigned long)count * resample_data[current_codec].delta) >> 16); } return count; } int dsp_stereo_mode(void) { dsp = &dsp_conf[current_codec]; return dsp->stereo_mode; } bool dsp_configure(int setting, intptr_t value) { dsp = &dsp_conf[current_codec]; switch (setting) { case DSP_SET_FREQUENCY: memset(&resample_data[current_codec], 0, sizeof(struct resample_data)); /* Fall through!!! */ case DSP_SWITCH_FREQUENCY: dsp->codec_frequency = (value == 0) ? NATIVE_FREQUENCY : value; /* Account for playback speed adjustment when setting dsp->frequency if we're called from the main audio thread. Voice UI thread should not need this feature. */ if (current_codec == CODEC_IDX_AUDIO) dsp->frequency = pitch_ratio * dsp->codec_frequency / 1000; else dsp->frequency = dsp->codec_frequency; resampler_set_delta(dsp->frequency); break; case DSP_SET_CLIP_MIN: dsp->clip_min = value; break; case DSP_SET_CLIP_MAX: dsp->clip_max = value; break; case DSP_SET_SAMPLE_DEPTH: dsp->sample_depth = value; if (dsp->sample_depth <= NATIVE_DEPTH) { dsp->frac_bits = WORD_FRACBITS; dsp->sample_bytes = sizeof(short); dsp->clip_max = ((1 << WORD_FRACBITS) - 1); dsp->clip_min = -((1 << WORD_FRACBITS)); } else { dsp->frac_bits = value; dsp->sample_bytes = 4; /* samples are 32 bits */ dsp->clip_max = (1 << value) - 1; dsp->clip_min = -(1 << value); } dither_init(); break; case DSP_SET_STEREO_MODE: dsp->stereo_mode = (long) value; break; case DSP_RESET: dsp->stereo_mode = STEREO_NONINTERLEAVED; dsp->clip_max = ((1 << WORD_FRACBITS) - 1); dsp->clip_min = -((1 << WORD_FRACBITS)); dsp->track_gain = 0; dsp->album_gain = 0; dsp->track_peak = 0; dsp->album_peak = 0; dsp->codec_frequency = dsp->frequency = NATIVE_FREQUENCY; dsp->sample_depth = NATIVE_DEPTH; dsp->frac_bits = WORD_FRACBITS; dsp->new_gain = true; break; case DSP_FLUSH: memset(&resample_data[current_codec], 0, sizeof (struct resample_data)); resampler_set_delta(dsp->frequency); dither_init(); break; case DSP_SET_TRACK_GAIN: dsp->track_gain = (long) value; dsp->new_gain = true; break; case DSP_SET_ALBUM_GAIN: dsp->album_gain = (long) value; dsp->new_gain = true; break; case DSP_SET_TRACK_PEAK: dsp->track_peak = (long) value; dsp->new_gain = true; break; case DSP_SET_ALBUM_PEAK: dsp->album_peak = (long) value; dsp->new_gain = true; break; default: return 0; } return 1; } void dsp_set_replaygain(bool always) { dsp = &dsp_conf[current_codec]; if (always || dsp->new_gain) { long gain = 0; dsp->new_gain = false; if (global_settings.replaygain || global_settings.replaygain_noclip) { bool track_mode = get_replaygain_mode(dsp->track_gain != 0, dsp->album_gain != 0) == REPLAYGAIN_TRACK; long peak = (track_mode || !dsp->album_peak) ? dsp->track_peak : dsp->album_peak; if (global_settings.replaygain) { gain = (track_mode || !dsp->album_gain) ? dsp->track_gain : dsp->album_gain; if (global_settings.replaygain_preamp) { long preamp = get_replaygain_int( global_settings.replaygain_preamp * 10); gain = (long) (((int64_t) gain * preamp) >> 24); } } if (gain == 0) { /* So that noclip can work even with no gain information. */ gain = DEFAULT_GAIN; } if (global_settings.replaygain_noclip && (peak != 0) && ((((int64_t) gain * peak) >> 24) >= DEFAULT_GAIN)) { gain = (((int64_t) DEFAULT_GAIN << 24) / peak); } if (gain == DEFAULT_GAIN) { /* Nothing to do, disable processing. */ gain = 0; } } /* Store in S8.23 format to simplify calculations. */ dsp->replaygain = gain; set_gain(); } }