Age | Commit message (Collapse) | Author |
|
buttons defined, a bootloader, and stubs for most drivers.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19574 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19083 a1c6a512-1295-4272-9138-f99709370657
|
|
an LCD driver. Lots of things are just copied from the e200v2, so this code needs testing, and then drivers properly merged if they prove to be the same.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18957 a1c6a512-1295-4272-9138-f99709370657
|
|
MODEL_NUMBER in the config-target.h file
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18838 a1c6a512-1295-4272-9138-f99709370657
|
|
used by Logik DAX and m200v1 ports) driver up in the target tree and share with the m200v2 - as2525 parts contributed by Rafael Carre. Includes the start (but is still very incomplete) of an LCD driver for the e200v2. m200v2 is not yet fully supported by mkamsboot - that will come soon. Also some minor cleanups for the Clip.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18836 a1c6a512-1295-4272-9138-f99709370657
|
|
V2 bootloader and firmware files. These files are the same format (a simple 8-byte header consisting of a 32-bit checksum followed by 4-char model name is prepended to the binary data) as that used by lots of other Rockbox targets (.ipod, iriver etc). Support added to scramble/mkamsboot for both clip and e200v2, even though the latter is not in SVN yet. Also add a check of the whole-file original firmware checksum to mkamsboot and add a new $scramblebitmaptools toolset variable in configure. The output of this version of mkamsboot is confirmed to be md5sum-identical to the previous version.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18789 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18684 a1c6a512-1295-4272-9138-f99709370657
|
|
DAX ports compile. Note that some codecs are currently disabled (due to lowmem on these targets), but that needs more work and analysis to decide how much RAM we want to allocate to codecs.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18566 a1c6a512-1295-4272-9138-f99709370657
|
|
quite an advanced stage, but is troubled by the lack of a reliable NAND driver (similar to the Cowon D2 port) and is not yet suitable for non-developers.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18435 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18187 a1c6a512-1295-4272-9138-f99709370657
|
|
later. We still need to hunt down snippets used that are not. 1324 modified
files...
http://www.rockbox.org/mail/archive/rockbox-dev-archive-2008-06/0060.shtml
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17847 a1c6a512-1295-4272-9138-f99709370657
|
|
Current status is that the bootloader works to load Rockbox, but dual boot does not work: it freezes after decrypting the OF. When Rockbox boots, it freezes somewhere between showing the logo and the main menu. And there's no driver for the touchpad. So lots of work left.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17809 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17732 a1c6a512-1295-4272-9138-f99709370657
|
|
sound. No touchpad now, buttons limited to using vol+/vol-/power for up/down/select. Rockbox USB is enabled since the OF is MTP only...read the warnings on the PortalPlayerUsb wiki page.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17591 a1c6a512-1295-4272-9138-f99709370657
|
|
yet as there's no C54xx compiler in the toolchain yet..
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17547 a1c6a512-1295-4272-9138-f99709370657
|
|
2) Clean up config
3) Add scramble description
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17502 a1c6a512-1295-4272-9138-f99709370657
|
|
tools/creative.c, which need checking.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17369 a1c6a512-1295-4272-9138-f99709370657
|
|
changes.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17241 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17112 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17060 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17045 a1c6a512-1295-4272-9138-f99709370657
|
|
* add Creative (ZVM, 60GB, ZV, ZVW, ZENV) support to scramble
* update configure to the correct values
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17042 a1c6a512-1295-4272-9138-f99709370657
|
|
on M3 with the cowon loader versions I've seen, but the space is reserved in all coldfire iaudio flash files (was just zeroed before).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16697 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16645 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16505 a1c6a512-1295-4272-9138-f99709370657
|
|
Maurus Cuelenaere
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16347 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16243 a1c6a512-1295-4272-9138-f99709370657
|
|
works. The ADC driver was copied from the H10 port (they can probably be combined later), but the battery readings aren't right and it shuts down. The touch pad buttons do not work. Install the bootloader and rockbox the H10 way. Still lots of work to do.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16030 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14922 a1c6a512-1295-4272-9138-f99709370657
|
|
-tcc=sum if the header just contains a single checksum, or -tcc=crc if the header contains two 32-bit CRCs. Credit goes to Hein-Pieter van Braam for his work on identifying the (reverse) CRC32 algorithm used when calculating the two CRCs
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14917 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14805 a1c6a512-1295-4272-9138-f99709370657
|
|
including some lcd options, FM radio, recording, and all plugins. Loading the OF from the Rockbox bootloader does not work.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14625 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14017 a1c6a512-1295-4272-9138-f99709370657
|
|
myself. This build fixes the problems seen with the latest builds on the Gigabeat X. Added View IO Ports under the Debug menu for the Gigabeat. Make sure you grab the latest bootloader from the Wiki as the old bootloader will not work properly with new builds.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13225 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12893 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12892 a1c6a512-1295-4272-9138-f99709370657
|
|
and the 4 character model id at the end of the mi4 header.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12760 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12517 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12465 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12461 a1c6a512-1295-4272-9138-f99709370657
|
|
OF and Rockbox. Rolo also works.
Changes made:
Combine bootloader/h10.c and bootloader/e200.c into a common bootloader file (bootloader/main-pp.c) to be used by all mi4 based PortalPlayer targets. The file bootloader/main-pp.c is based off the old bootloader/h10.c with some minor changes to allow it to work on the Sansa too. This effectively adds a Sansa bootloader.
Define MODEL_NAME string in config-*.h for use in bootloader.
Split crt0-pp.S into separate files for bootloader and normal builds. Bootloader code is now in crt0-pp-bl.S while normal build code stays in crt0-pp.S.
Improvements to crt0-pp.S and crt0-pp-bl.S (mostly to make it more multiprocessor safe):
* Leave space in bootloader at 0xe0-0xeb since scramble writes over there when it creates the mi4 file (don't leave space for iPods since it's not needed and all code in crt0-pp-bl.S needs to fit before the boot_table at 0x100).
* Remove unused DEBUG and STUB code from crt0-pp.S.
* Make CPU wait for COP to be sleeping when we put the COP to sleep.
* Invalidate COP cache when COP wakes
* Flush CPU cache before waking COP
* Make sure only the CPU clears the BSS (not the COP)
* Make sure only the CPU sets up its own stack (not the COP)
Rolo works on H10, so enable it.
Make Sansa e200 use rockbox.e200 rather than PP5022.mi4 for 'Normal' builds. This makes updating rockbox simpler as we don't need to go through the firmware update procedure, but rather just put a new rockbox.e200 on the device. rockbox.e200 uses a simple 'add' checksum.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11815 a1c6a512-1295-4272-9138-f99709370657
|
|
PortalPlayer PP5020 target.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10828 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10824 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10817 a1c6a512-1295-4272-9138-f99709370657
|
|
by the iriver H10, Sansa E200 etc. Based on the documentation available at http://daniel.haxx.se/sansa/mi4.html and examination of files produced by mkmi4.sh
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10816 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10781 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10282 a1c6a512-1295-4272-9138-f99709370657
|
|
an ipod photo so far, and will definitely not work on either a 3g or a 5g. If you never want to use the Apple firmware, you can create a firmware partition image containing just the Rockbox bootloader with the command "../tools/scramble -ipod bootloader/bootloader.bin bootloader.img" and then write bootloader.img to your firmware partition.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10275 a1c6a512-1295-4272-9138-f99709370657
|
|
sound, no buttons, and hangs at the boot screen.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@9363 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@9278 a1c6a512-1295-4272-9138-f99709370657
|