Age | Commit message (Collapse) | Author |
|
whenever recording is enabled there.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14980 a1c6a512-1295-4272-9138-f99709370657
|
|
with one. Kill all the now unneeded cache flushing and i2s tweaking on e200 so clicking is no worry. Write the driver framebuffer at uncached addresses. Recording monitoring may be a little noisy in the left channel for the moment when not boosted and will be addressed. All seems to work as advertised including flash ROM dump.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14976 a1c6a512-1295-4272-9138-f99709370657
|
|
mapped framebuffer that requires constant cache flushing like on e200.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14974 a1c6a512-1295-4272-9138-f99709370657
|
|
breaks the build
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14967 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14965 a1c6a512-1295-4272-9138-f99709370657
|
|
that many (if not all) c200s have the radio hardware even if you can't use it with the original firmware...
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14963 a1c6a512-1295-4272-9138-f99709370657
|
|
with voice running on pp5020.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14961 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14957 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14955 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14951 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14950 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14949 a1c6a512-1295-4272-9138-f99709370657
|
|
recording. Provide reg bit definitions for those. Add some temporary hacks pcm-pp to prevent crashing when playing after recording. Make playback start after recording on pp5020. Get wm8731 to monitor recording but plans are to do that digitally.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14948 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14946 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14945 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14942 a1c6a512-1295-4272-9138-f99709370657
|
|
but will not actually be used in the bootloader once rockbox main is running)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14937 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14936 a1c6a512-1295-4272-9138-f99709370657
|
|
adds the very begining of the rtc driver (only reads the time currently
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14935 a1c6a512-1295-4272-9138-f99709370657
|
|
headaches later in unrelated places.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14934 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14933 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14931 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14929 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14927 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14926 a1c6a512-1295-4272-9138-f99709370657
|
|
nescessary to use queue_reply to return a value other than zero or to return a result before waiting on the queue again.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14923 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14922 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14920 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14919 a1c6a512-1295-4272-9138-f99709370657
|
|
fixed however detecting an encoder writing too many samples to a chunk will remain and be enabled in a DEBUG build as an aid for adding encoders. Do some cleanup on the filename queue. Loosen up the control interface where synchronous thread blocking isn't required for pause/stop/resume.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14918 a1c6a512-1295-4272-9138-f99709370657
|
|
only, if
a target supports both modes.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14916 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14914 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14913 a1c6a512-1295-4272-9138-f99709370657
|
|
not really too important. Use them in the code.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14912 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14909 a1c6a512-1295-4272-9138-f99709370657
|
|
change some of the uart function names from CamelCase
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14908 a1c6a512-1295-4272-9138-f99709370657
|
|
(FS#5199). Original patch by Tomasz Mon, modified by me.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14907 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14905 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14900 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14899 a1c6a512-1295-4272-9138-f99709370657
|
|
for bootloaders. Remove cop stack entirely and keep IRAM use down on all relevant targets - just use the 128-byte idle stack. Use the inline asm version of current_core for pp5002 as well.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14898 a1c6a512-1295-4272-9138-f99709370657
|
|
until the firmware is ready to be run.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14888 a1c6a512-1295-4272-9138-f99709370657
|
|
alarm had been set.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14885 a1c6a512-1295-4272-9138-f99709370657
|
|
time, ID3 info, cuesheet viewer...). I haven't found a solution for scrolling yet, so that won't look too good.
The recording screen code needs a bit of adapting too, but I don't have a target to test on, so leave it for now.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14884 a1c6a512-1295-4272-9138-f99709370657
|
|
code more readable.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14883 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14882 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14880 a1c6a512-1295-4272-9138-f99709370657
|
|
handling, stacks, firmware startup and thread startup. Tested on e200, H10-20GB, iPod Color and 5.5G. Thread function return implemented for all targets. Some changes to plugins to follow shortly.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14879 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14878 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14877 a1c6a512-1295-4272-9138-f99709370657
|