Age | Commit message (Collapse) | Author |
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23275 a1c6a512-1295-4272-9138-f99709370657
|
|
Flyspray: FS#10627
Author: Bob Cousins
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23265 a1c6a512-1295-4272-9138-f99709370657
|
|
to the host. This makes the handling less timing sensitive on some controllers
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23263 a1c6a512-1295-4272-9138-f99709370657
|
|
beginning of card init instead of the end of pl180 controller init.
If a card is reinitialized now the ident frequency is used instead of the bypass frequency during the identification phase.
Added comments throughout sd_init_card() to help follow init process and highlight indent stage.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23256 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23255 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23247 a1c6a512-1295-4272-9138-f99709370657
|
|
current_time, instead of comparing them directly.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23246 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23244 a1c6a512-1295-4272-9138-f99709370657
|
|
unneccessarily if they are aligned anyways and using cache coherency functions instead of bypassing the caches altogether.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23243 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23240 a1c6a512-1295-4272-9138-f99709370657
|
|
file, as changes were needed all over the place.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23239 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23238 a1c6a512-1295-4272-9138-f99709370657
|
|
Timers will be more accurate now.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23237 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23234 a1c6a512-1295-4272-9138-f99709370657
|
|
more generic lcd_(remote)_putsf function(s) instead and use those in more places
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23233 a1c6a512-1295-4272-9138-f99709370657
|
|
- Also fix bug where all other modes were not functional
- Hopefully fixes FS#10651 - H10 USB HID keymap problem
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23228 a1c6a512-1295-4272-9138-f99709370657
|
|
Rework keymaps
This commit makes the code neater and more readable. It makes it easier to
modify keymap assignments and new keypad modes.
Some platforms had their keypad mappings reworked.
The manual is updated to reflect all these changes.
H10 remote control mapping dropped.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23219 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23217 a1c6a512-1295-4272-9138-f99709370657
|
|
players run slightly low.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23205 a1c6a512-1295-4272-9138-f99709370657
|
|
Also, changed FLASH_SIZE for the S to 2MB rather than 4MB as all available evidence suggests it's right.
Flyspray: FS#10410 (by me)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23203 a1c6a512-1295-4272-9138-f99709370657
|
|
touchscreen controller).
Flyspray: FS#10671
Author: Jonas Aaberg
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23194 a1c6a512-1295-4272-9138-f99709370657
|
|
Reimplement voltage scaling on AMS Sansas at 1.10v during unboosted operation to improve runtimes. The voltage is now also boosted during disk access if a µSD is present. This prevents the µSD problems we saw on the last implementation.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23193 a1c6a512-1295-4272-9138-f99709370657
|
|
Don't implement usb_enable() is HAVE_USBSTACK is not defined
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23185 a1c6a512-1295-4272-9138-f99709370657
|
|
Implement usb_enable()
Reorder/Modify usb_drv_init() to match closer the OF and remove a freeze
(USB registers were accessed before the USB module was enabled)
Add a panic in USB isr to be sure we notice when it's called
Reset GPIOA direction for usb_detect() to notice extraction
Add some comments
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23184 a1c6a512-1295-4272-9138-f99709370657
|
|
Remove useless E200V2 || FUZE || C200V2 : all those models have
MULTIDRIVE and/or HOTSWAP defined and have no specific difference.
Correct some comments
Remove HAVE_MULTIDRIVE within HAVE_HOTSWAP since HOTSWAP imply MULTIDRIVE
Change HOTSWAP to MULTIDRIVE where needed
Use NUM_DRIVES in sd_num_drives()
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23180 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23163 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23161 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23159 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23157 a1c6a512-1295-4272-9138-f99709370657
|
|
The bits which are not divider (i2si/i2so enable and clock selection)
would be unset.
This is not a problem in the current code since this function was always
called before starting playback (and setting those bits) but this might
be a problem when recording is enabled.
Finally it is simpler to read.
Thanks to Fred Bauer for pointing this.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23156 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23150 a1c6a512-1295-4272-9138-f99709370657
|
|
This was accidentally reverted in r23099
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23148 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23146 a1c6a512-1295-4272-9138-f99709370657
|
|
(audio playback didn't work).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23143 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23139 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23138 a1c6a512-1295-4272-9138-f99709370657
|
|
High Speed SD Card.
We are unable to successfully put the pl180 controller into 4 bit mode so we should not put the cards into widebus mode for now.
The blocklength is hardcoded to 512 in sd.c and BLOCKLEN defaults to 512 so this command is not needed.
It appears the internal SD card is not HS capable but sending it the HS switch command does not seem to hinder it's init process.
Assume all SD_V2 cards are HS capable and send them the HS switch command.
If View disk info shows 50.0 MBit/s the card has HS timings.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23137 a1c6a512-1295-4272-9138-f99709370657
|
|
of the line
Thanks to Teruaki Kawashima (teru) for providing this solution
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23132 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23129 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23127 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23126 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23125 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23124 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23122 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23120 a1c6a512-1295-4272-9138-f99709370657
|
|
fixing
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23118 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23117 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23115 a1c6a512-1295-4272-9138-f99709370657
|
|
speed setting
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23114 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23113 a1c6a512-1295-4272-9138-f99709370657
|