| Age | Commit message (Collapse) | Author |
|---|
|
For s5l8701, s5l8702 and as3525v2 targets.
The crash occurs when USB is inserted or extracted while the playlist
is being loaded or updated (it could take a few seconds for huge
playlists), at this point all buflib memory is allocated and not freed
before usb_starage_init_connection() is executed.
This workaround mitigates this panic by using static memory for USB
buffers, so this memory cannot be used for other tasks, in addition
the problem still persist when playlist load is 'paused' by USB
insertion and then updated after USB extraction.
Change-Id: Iff1db5a949361fd543e0b494924d1f2906c84b5e
|
|
Many includes of fat.h are pointless. Some includes are just for
SECTOR_SIZE. Add a file 'firmware/include/fs_defines.h' for that
and to define tuneable values that were scattered amongst various
headers.
Remove some local definitions of SECTOR_SIZE since they have to be
in agreement with the rest of the fs code anyway.
(We'll see what's in fact pointless in a moment ;)
Change-Id: I9ba183bf58bd87f5c45eba7bd675c7e2c1c18ed5
|
|
Change-Id: Ib2635c905462cd34befa3ca61e5d55c869686b48
|
|
Based on g#844 and g#949, it is intended as a replacement for the
current s3c6400x USB driver.
The DesignWare USB OTG core is integrated into many SoC's, however
HW core version and capabilities (mainly DMA mode, Tx FIFO mode,
FIFO size and number of available IN/OUT endpoins) may differ:
CPU targets HW ver DMA NPTX FIFO FIFO sz #IN/OUT
-------- ------------- ------ --- --------- ------- -------
as3525v2 sansaclipplus 2.60a Yes Dedicated 0x535 4/4
sansaclipv2
sansaclipzip
sansafuzev2
s5l8701 ipodnano2g 2.20a Yes Shared 0x500 4/5
s5l8702 ipod6g 2.60a Yes Dedicated 0x820 7/7
ipodnano3g
s5l8720 ipodnano4g ? ? ? ? ?
Functionality supported by this driver:
- Device mode, compatible with USB 1.1/2.0 hosts.
- Shared FIFO (USB_DW_SHARED_FIFO) or dedicated FIFOs.
- No DMA (USB_DW_ARCH_SLAVE) or internal DMA mode.
- Concurrent transfers: control, bulk (usb_storage, usb_serial) and
interrupt (usb_hid).
Actually this driver is not used by any CPU, it will be enabled for
each individual CPU/target in next patches.
Change-Id: I74a1e836d18927a31f6977d71115fb442477dd5f
|
|
Clearly this was a stupid commit, no idea why I did that.
This reverts commit 074e911859a0d3464fde9b701b3cff712c5826e0.
|
|
This patch redoes the filesystem code from the FAT driver up to the
clipboard code in onplay.c.
Not every aspect of this is finished therefore it is still "WIP". I
don't wish to do too much at once (haha!). What is left to do is get
dircache back in the sim and find an implementation for the dircache
indicies in the tagcache and playlist code or do something else that
has the same benefit. Leaving these out for now does not make anything
unusable. All the basics are done.
Phone app code should probably get vetted (and app path handling
just plain rewritten as environment expansions); the SDL app and
Android run well.
Main things addressed:
1) Thread safety: There is none right now in the trunk code. Most of
what currently works is luck when multiple threads are involved or
multiple descriptors to the same file are open.
2) POSIX compliance: Many of the functions behave nothing like their
counterparts on a host system. This leads to inconsistent code or very
different behavior from native to hosted. One huge offender was
rename(). Going point by point would fill a book.
3) Actual running RAM usage: Many targets will use less RAM and less
stack space (some more RAM because I upped the number of cache buffers
for large memory). There's very little memory lying fallow in rarely-used
areas (see 'Key core changes' below). Also, all targets may open the same
number of directory streams whereas before those with less than 8MB RAM
were limited to 8, not 12 implying those targets will save slightly
less.
4) Performance: The test_disk plugin shows markedly improved performance,
particularly in the area of (uncached) directory scanning, due partly to
more optimal directory reading and to a better sector cache algorithm.
Uncached times tend to be better while there is a bit of a slowdown in
dircache due to it being a bit heavier of an implementation. It's not
noticeable by a human as far as I can say.
Key core changes:
1) Files and directories share core code and data structures.
2) The filesystem code knows which descriptors refer to same file.
This ensures that changes from one stream are appropriately reflected
in every open descriptor for that file (fileobj_mgr.c).
3) File and directory cache buffers are borrowed from the main sector
cache. This means that when they are not in use by a file, they are not
wasted, but used for the cache. Most of the time, only a few of them
are needed. It also means that adding more file and directory handles
is less expensive. All one must do in ensure a large enough cache to
borrow from.
4) Relative path components are supported and the namespace is unified.
It does not support full relative paths to an implied current directory;
what is does support is use of "." and "..". Adding the former would
not be very difficult. The namespace is unified in the sense that
volumes may be specified several times along with relative parts, e.g.:
"/<0>/foo/../../<1>/bar" :<=> "/<1>/bar".
5) Stack usage is down due to sharing of data, static allocation and
less duplication of strings on the stack. This requires more
serialization than I would like but since the number of threads is
limited to a low number, the tradoff in favor of the stack seems
reasonable.
6) Separates and heirarchicalizes (sic) the SIM and APP filesystem
code. SIM path and volume handling is just like the target. Some
aspects of the APP file code get more straightforward (e.g. no path
hashing is needed).
Dircache:
Deserves its own section. Dircache is new but pays homage to the old.
The old one was not compatible and so it, since it got redone, does
all the stuff it always should have done such as:
1) It may be update and used at any time during the build process.
No longer has one to wait for it to finish building to do basic file
management (create, remove, rename, etc.).
2) It does not need to be either fully scanned or completely disabled;
it can be incomplete (i.e. overfilled, missing paths), still be
of benefit and be correct.
3) Handles mounting and dismounting of individual volumes which means
a full rebuild is not needed just because you pop a new SD card in the
slot. Now, because it reuses its freed entry data, may rebuild only
that volume.
4) Much more fundamental to the file code. When it is built, it is
the keeper of the master file list whether enabled or not ("disabled"
is just a state of the cache). Its must always to ready to be started
and bind all streams opened prior to being enabled.
5) Maintains any short filenames in OEM format which means that it does
not need to be rebuilt when changing the default codepage.
Miscellaneous Compatibility:
1) Update any other code that would otherwise not work such as the
hotswap mounting code in various card drivers.
2) File management: Clipboard needed updating because of the behavioral
changes. Still needs a little more work on some finer points.
3) Remove now-obsolete functionality such as the mutex's "no preempt"
flag (which was only for the prior FAT driver).
4) struct dirinfo uses time_t rather than raw FAT directory entry
time fields. I plan to follow up on genericizing everything there
(i.e. no FAT attributes).
5) unicode.c needed some redoing so that the file code does not try
try to load codepages during a scan, which is actually a problem with
the current code. The default codepage, if any is required, is now
kept in RAM separarately (bufalloced) from codepages specified to
iso_decode() (which must not be bufalloced because the conversion
may be done by playback threads).
Brings with it some additional reusable core code:
1) Revised file functions: Reusable code that does things such as
safe path concatenation and parsing without buffer limitations or
data duplication. Variants that copy or alter the input path may be
based off these.
To do:
1) Put dircache functionality back in the sim. Treating it internally
as a different kind of file system seems the best approach at this
time.
2) Restore use of dircache indexes in the playlist and database or
something effectively the same. Since the cache doesn't have to be
complete in order to be used, not getting a hit on the cache doesn't
unambiguously say if the path exists or not.
Change-Id: Ia30f3082a136253e3a0eae0784e3091d138915c8
Reviewed-on: http://gerrit.rockbox.org/566
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested: Michael Sevakis <jethead71@rockbox.org>
|
|
Change-Id: I6e9ba6a2570915191cf5b66f58ed9ddb1959b6cc
|
|
Windows will try to retrieve such a descriptor on first connect.
If the device returns STALL or a regular string descriptor (i.e.
not one that follows the Microsoft OS Descriptor spec), things
will continue normally.
Unfortunately some of our low-level USB drivers have issues with
STALL so any other valid descriptor is the next best solution.
Change-Id: I59eb09eea157e4e14bec0197a898be378a5559f2
Reviewed-on: http://gerrit.rockbox.org/680
Reviewed-by: Frank Gevaerts <frank@gevaerts.be>
Tested: Frank Gevaerts <frank@gevaerts.be>
|
|
usb_storage needs a fairly reasonable amount of memory. Allocating
what we need and no more allows other (future) USB drivers to get
something too, and is much cleaner in general.
Change-Id: Iec9573c0f251f02400f92d92727cbf2969785de0
|
|
disconnect() needs to be called exactly once per call to init_connection().
In case of bus resets, disconnect() was not called, which led to leaking
alloc_maximum() allocated buflib handles, which led to buflib running out
of memory to allocate.
Change-Id: I03025da578dc54e48b6de6bd3e3f40feae7220a6
|
|
Change-Id: I7ae40db0f81d1d51742501936b13b387f94a25e5
|
|
This fixes the radioart crash that was the result of buffering.c working
on a freed buffer at the same time as buflib (radioart uses buffering.c for the
images). With this change the buffer is owned by buflib exclusively so this
cannot happen.
As a result, audio_get_buffer() doesn't exist anymore. Callers should call
core_alloc_maximum() directly. This buffer needs to be protected as usual
against movement if necessary (previously it was not protected at all which
cased the radioart crash), To get most of it they can adjust the willingness of
the talk engine to give its buffer away (at the expense of disabling voice
interface) with the new talk_buffer_set_policy() function.
Change-Id: I52123012208d04967876a304451d634e2bef3a33
|
|
When using variadic macros there's no need for IF_MD2/IF_MV2 to deal
with function parameters. IF_MD/IF_MV are enough.
Throw in IF_MD_DRV/ID_MV_VOL that return the parameter if MD/MV, or 0
if not.
Change-Id: I7605e6039f3be19cb47110c84dcb3c5516f2c3eb
|
|
Change-Id: I1167851bae20d9275eb2f441ce9dc73c8b2f09b1
Reviewed-on: http://gerrit.rockbox.org/488
Reviewed-by: Frank Gevaerts <frank@gevaerts.be>
Reviewed-by: Bertrik Sikken <bertrik@sikken.nl>
Tested-by: Bertrik Sikken <bertrik@sikken.nl>
|
|
Change-Id: I087aefd2854978813c7e4ed7ef7da400f3692e39
|
|
Add stall when unknown SCSI command is hit
Change-Id: Icbeea905cd262ab296fb34470e54c665b8bab488
|
|
Change-Id: Icb1e973aa5fd8520eff0796aa8164e0a988d9107
|
|
Currently we don't know where the serial number is stored on the
stmp3600. It is probably using the laser fuses but this needs to
be investigated
Change-Id: I1ac25e38b8f65635abb68788ceb65df0a740dabd
|
|
Change-Id: I3c622119a1e296ec6b3f35f27e81b5118ab7f6cc
|
|
Change-Id: I8ac7561119e51774b9aee377e7373a7e830a5780
|
|
Some USB controllers like the one of the Rockchip 27xx handle some
requests in pure hardware. This is especially a problem for two
of them:
- SET ADDR which is used by our core to track the DEFAULT/ADDRESS
state and is required for the drivers to work properly
- SET CONFIG which is used by our core to initialise the drivers
by calling init_connection()
In these cases we need a way to notify the core that such requests
happened.
We do this by exporting two functions which directly notify the
core about these requests and perform the necessary init steps
required without doing the actual USB transfers. Special care is
needed because these functions could be called from an interrupt
handler. For this reason we still use the usb_queue and introduce
new IDs so that they are processed in order and safely.
No functional change is intended, both in the usbstack and on
targets without such quirks.
Change-Id: Ie42feffd4584e88bf37cff018b627f333dca1140
|
|
Compute a serial number using the ocotp OPS bits like the OF.
Also add a comment about the first character of serial number
being a indicator of the enabled interfaces.
Change-Id: I9b90aed4e3b803f12fec003c9bc8ee8a046f4e42
|
|
When the source string terminates (with a 0) we pad the rest of the
destination with spaces.
|
|
|
|
|
|
|
|
sequence, by Bartosz Fabianowski, with minor tweaks by Michael Sevakis (FS#12497)
FreeBSD apparently sends a SET_ADDRESS first, which confused our code.
This patch fixes that, and also simplifies the connection handling a bit.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31582 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31498 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31482 a1c6a512-1295-4272-9138-f99709370657
|
|
limitation, not a CPU limitation, so use the appropriate defines to test for it
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31476 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31467 a1c6a512-1295-4272-9138-f99709370657
|
|
descriptor_hid_get() updates its parameter so we need to take its address
the update is hidden inside PACK_DATA macro
Fix HID on the Fuze+
Reported by jlbiasini
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31466 a1c6a512-1295-4272-9138-f99709370657
|
|
Declare loop variables inside for() ala C99
Remove useless casts
Remove one level of pointer indirection in descriptor_hid_get()
Simplify a few switch()
Align case on the same level than switch
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31457 a1c6a512-1295-4272-9138-f99709370657
|
|
Wouldn't surprise me a bit to get some non-green.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31339 a1c6a512-1295-4272-9138-f99709370657
|
|
Without an RTC, Rockbox doesn't keep time. In that situation, USB time sync
previously did nothing but reported success. After this change, the USB time
sync request won't be recognized on those targets.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31319 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31275 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31274 a1c6a512-1295-4272-9138-f99709370657
|
|
have a different logical sector size for the internal storage and the sd card, like on the fuze+ for example.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31270 a1c6a512-1295-4272-9138-f99709370657
|
|
data for reference or future use.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31256 a1c6a512-1295-4272-9138-f99709370657
|
|
Reported by cppcheck
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30815 a1c6a512-1295-4272-9138-f99709370657
|
|
This option allows accessing the card slot from "dumb" USB hosts like some car
audio systems that do not handle multi-LUN devices.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30489 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29832 a1c6a512-1295-4272-9138-f99709370657
|
|
and replace them with a single statically allocated sector buffer that's arbitrated amongst users)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29445 a1c6a512-1295-4272-9138-f99709370657
|
|
causing USB mode to be entered. Enable for SA9200 only at this time. Also, for SA9200, use the bus power GPIO rather than the 'connector inserted' GPIO to detect the cable.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29068 a1c6a512-1295-4272-9138-f99709370657
|
|
being. Add HAVE_BOOTLOADER_USB_MODE to config if BOOTLOADER is defined to enable it. Clean up some kernel stuff a little to support it. Mess up a bunch of other stuff (hopefully not too badly).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29053 a1c6a512-1295-4272-9138-f99709370657
|
|
drive to only the main data partition by default. To access the bootloader partition instead, press 'Vol -' while it connects (in bootloader and firmware). Hopefully doesn't break anything for anyone.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28972 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28733 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28196 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28121 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28013 a1c6a512-1295-4272-9138-f99709370657
|
