Age | Commit message (Collapse) | Author |
|
Introduce a new .init section for initialisation code, so that it can be copied to an area which is later overwritten before calling. The stack/bss can then overwrite that code, effectively freeing the code size that the initialisation routines need. Gives a few kB ram usage back.
Only implemented for PP and as3525 so far. More targets could be added, as well as more functions.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25013 a1c6a512-1295-4272-9138-f99709370657
|
|
later. We still need to hunt down snippets used that are not. 1324 modified
files...
http://www.rockbox.org/mail/archive/rockbox-dev-archive-2008-06/0060.shtml
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17847 a1c6a512-1295-4272-9138-f99709370657
|
|
remote power button vs. the respective hold switch, and shut down when on hold. On X5/M5 this check is not strictly necessary for the main unit, but left there to keep things uniform. (2) M3: Stop reading the ADC properly before leaving the bootloader, on RoLo, and on reboot, to make it work reliably after those transitions. (3) Disable all interrupt sources on system init to avoid premature ISR calls after enabling interrupts in general. (4) iAudios: Proper implementation of ide_powered(), avoiding nasty HDD clicks in the bootloader when powering down, e.g. because of Hold. (5) Slight optimisations.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16689 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13174 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11485 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11392 a1c6a512-1295-4272-9138-f99709370657
|
|
should be.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11358 a1c6a512-1295-4272-9138-f99709370657
|
|
plugged. Good for another few points of boost and 4fps full-screen unboosted. The button scan enabling seems stable and I've been using it without any difficulties but if the interrupts hiccup it could leave them unresponsive. Clearing the GPI0 interrupts before enabling them seems to prevent any difficulties. If there's problems there I'll just leave the remote reading bypass only and 50% of the benefits will still be realized.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11357 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11129 a1c6a512-1295-4272-9138-f99709370657
|
|
driver for H10. Thanks to Laurent Baum for all his help with this code.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10701 a1c6a512-1295-4272-9138-f99709370657
|
|
positions.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@9079 a1c6a512-1295-4272-9138-f99709370657
|
|
and the iRiver
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@8934 a1c6a512-1295-4272-9138-f99709370657
|
|
but needs testing and stuff. Also improved the RTC driver and moved it to where it belongs, and interrupt protected a bunch of possibly broken i2c. Also start preparing code for ipod charge monitoring. Note: on the 5g, this takes up enough processor time to increase skippiness noticeably in WPS.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@8911 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@8828 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@8811 a1c6a512-1295-4272-9138-f99709370657
|
|
REMOTETYPE_H100_LCD, REMOTETYPE_H300_LCD or REMOTETYPE_H300_NONLCD
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@8721 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@8342 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@7907 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@7906 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@7067 a1c6a512-1295-4272-9138-f99709370657
|
|
for the h100 series.
Please re-run configure.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@7062 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@6105 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@6020 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@5672 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@5671 a1c6a512-1295-4272-9138-f99709370657
|
|
possible (2) Proper #defines for FM recorder button ADC channels (3) Got rid of old port B #defines only valid for recorder (4) button filtering for all models (5) RoLo with ON after panic should now work for FM/V2
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@5472 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@5436 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@5429 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@5066 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@5062 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@3219 a1c6a512-1295-4272-9138-f99709370657
|