Age | Commit message (Collapse) | Author |
|
bootloader compile (with a small change against the committed tools/tonfigure, and it won't actually work yet).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12588 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12445 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12412 a1c6a512-1295-4272-9138-f99709370657
|
|
bootloader and rockbox with audio.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11850 a1c6a512-1295-4272-9138-f99709370657
|
|
OF and Rockbox. Rolo also works.
Changes made:
Combine bootloader/h10.c and bootloader/e200.c into a common bootloader file (bootloader/main-pp.c) to be used by all mi4 based PortalPlayer targets. The file bootloader/main-pp.c is based off the old bootloader/h10.c with some minor changes to allow it to work on the Sansa too. This effectively adds a Sansa bootloader.
Define MODEL_NAME string in config-*.h for use in bootloader.
Split crt0-pp.S into separate files for bootloader and normal builds. Bootloader code is now in crt0-pp-bl.S while normal build code stays in crt0-pp.S.
Improvements to crt0-pp.S and crt0-pp-bl.S (mostly to make it more multiprocessor safe):
* Leave space in bootloader at 0xe0-0xeb since scramble writes over there when it creates the mi4 file (don't leave space for iPods since it's not needed and all code in crt0-pp-bl.S needs to fit before the boot_table at 0x100).
* Remove unused DEBUG and STUB code from crt0-pp.S.
* Make CPU wait for COP to be sleeping when we put the COP to sleep.
* Invalidate COP cache when COP wakes
* Flush CPU cache before waking COP
* Make sure only the CPU clears the BSS (not the COP)
* Make sure only the CPU sets up its own stack (not the COP)
Rolo works on H10, so enable it.
Make Sansa e200 use rockbox.e200 rather than PP5022.mi4 for 'Normal' builds. This makes updating rockbox simpler as we don't need to go through the firmware update procedure, but rather just put a new rockbox.e200 on the device. rockbox.e200 uses a simple 'add' checksum.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11815 a1c6a512-1295-4272-9138-f99709370657
|
|
header parsing and memmove isn't used in Rockbox, it was just leftover from the original ipodlinux loader. Note that we still need the empty space in the bootloader (400 bytes starting at 0x100 - the 'boot_table' definition in firmware/target/arm/crt0-pp.S) to maintain compatibility with ipod_fw/make_fw (which will write information there that we have always ignored).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11704 a1c6a512-1295-4272-9138-f99709370657
|
|
Add ADC driver (may not be needed). Fix a bug in the button driver.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11237 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11190 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11177 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10830 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10536 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10431 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10398 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@8831 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@8802 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@8585 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@8583 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@8571 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@8560 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@8178 a1c6a512-1295-4272-9138-f99709370657
|
|
table doesn't fit in IRAM
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@8171 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@8006 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@7916 a1c6a512-1295-4272-9138-f99709370657
|
|
- this needs replacing by a better button driver in firmware/ and triple-boot bootloader functionality. Current button mappings: MENU loads rockbox.ipod and checks the checksum (but doesn't execute it), PLAY will load and execute a Linux kernel (linux.bin). An error in either of those two actions, or no keypress will load the original firmware
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@7848 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@7781 a1c6a512-1295-4272-9138-f99709370657
|
|
attribute macro), allowing to put 'const' data into IRAM without causing a section type conflict, and .ibss (selectable with the IBSS_ATTR attribute macro) for uninitialised data. * Rockbox core: Adjusted the linker scripts and init code to not include the .ibss section in the binary, it is cleared instead. Saves ~500 bytes on archos and ~30KB on iriver. Codecs and plugins don't handle .ibss in a special way yet. * The init code properly handles empty sections now (except .stack, which should never be empty). * Unified the init code for SH1 and coldfire a bit.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@7644 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@7186 a1c6a512-1295-4272-9138-f99709370657
|
|
address for both H110 and H120/140
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@7082 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@6325 a1c6a512-1295-4272-9138-f99709370657
|
|
only iRiver).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@5952 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@5691 a1c6a512-1295-4272-9138-f99709370657
|