Age | Commit message (Collapse) | Author |
|
controller. Add some clocking registers to 'View I/O ports'.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13720 a1c6a512-1295-4272-9138-f99709370657
|
|
version. Move function out of iram as it turns out that makes it
slightly faster.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13713 a1c6a512-1295-4272-9138-f99709370657
|
|
integration work into recording and the AS3514 audio driver. Do a little AS3514 fiq_record tweak to have it all work nicely from the start.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13573 a1c6a512-1295-4272-9138-f99709370657
|
|
soon. Most every bit of weirdness is nescessary and no problems seem to exist that the retailos doesn't exhibit too (namely noise when LCD is on when recording from MIC).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13557 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13550 a1c6a512-1295-4272-9138-f99709370657
|
|
* add mas35xx driver for all mas35xx targets. Later
mas35xx code from sound.c will move to this new driver
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13464 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13403 a1c6a512-1295-4272-9138-f99709370657
|
|
intended interface.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13307 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13276 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13239 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13209 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13208 a1c6a512-1295-4272-9138-f99709370657
|
|
target tree
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13207 a1c6a512-1295-4272-9138-f99709370657
|
|
problems with possible ports in the future: Gigabeat S/V (i.mx31 based) and Kenwood HD20GA7/HD20GA9 (s3c2440 based)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13200 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13174 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13114 a1c6a512-1295-4272-9138-f99709370657
|
|
(only one usb-target.h).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13110 a1c6a512-1295-4272-9138-f99709370657
|
|
just a copy-and-paste of the Gigabeat version by Michael Sevakis with no attempt to adapt to the different CPU in the E200 - so there could be room for further improvement. Reported to increase the FPS for the 224x128 version of Elephants Dream from 21fps to 27fps.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13042 a1c6a512-1295-4272-9138-f99709370657
|
|
speedup. ;)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12998 a1c6a512-1295-4272-9138-f99709370657
|
|
that adding non-ISO8859-1 scripts becomes possible (limited by the LCD capabilities of course). * Make the API more similar to the bitmap LCD code's API. * Moved hardware dependent parts to target tree. * Simplified code. * Jumpscroll temporarily non-functional.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12916 a1c6a512-1295-4272-9138-f99709370657
|
|
Make PNX0101-specific system.c and crt0.S.
Add new register names from LPC2880 user manual.
Add support for timer.
Enable CPU frequency changing.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12904 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12888 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12844 a1c6a512-1295-4272-9138-f99709370657
|
|
the players RAM is <= 1MB. Make any needed changes to things to stabilize and facilitate this including removing flattening out initialization. Comment some things heavily. Fix a few logfs I didn't want to see the compiler complaining about.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12843 a1c6a512-1295-4272-9138-f99709370657
|
|
and Christian Gmeiner from the AS3514 datasheet.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12727 a1c6a512-1295-4272-9138-f99709370657
|
|
System|Debug|View HW info.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12723 a1c6a512-1295-4272-9138-f99709370657
|
|
back.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12693 a1c6a512-1295-4272-9138-f99709370657
|
|
for IAUDIO_X5 to also check for IAUDIO_M5, moved code around the target tree, added preliminary background for the sim.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12610 a1c6a512-1295-4272-9138-f99709370657
|
|
bootloader compile (with a small change against the committed tools/tonfigure, and it won't actually work yet).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12588 a1c6a512-1295-4272-9138-f99709370657
|
|
charging, to save power
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12547 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12520 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12485 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12479 a1c6a512-1295-4272-9138-f99709370657
|
|
#if defined(BLAA) && BLAA == something defeats the point of Wundef
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12378 a1c6a512-1295-4272-9138-f99709370657
|
|
1) Move ARC OTG USB (used in PP502x) driver code into it's own file, drivers/arcotg_udc.c. Hopefully in the future we will be able to adapt more of the Linux driver and add it to this file.
2) Rename mx31.h to arcotg_udc.h to reflect the file the code came from. It's also a more accurate name for the USB controller.
3) Get rid of one more inl()/outl() in usb-pp.c and use the relevant #define instead.
4) Add dr_controller_stop(). Not used yet.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12340 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12297 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12185 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12126 a1c6a512-1295-4272-9138-f99709370657
|
|
Move into target tree.
Use #defines instead of inb/outb.
Also restore comments in PP5020 I2C code.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12124 a1c6a512-1295-4272-9138-f99709370657
|
|
Move into target tree.
Use #defines instead of inb/outb.
Whitespace cleanup.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12123 a1c6a512-1295-4272-9138-f99709370657
|
|
PP5020/5021/5022 targets atm. PP5002 seems to have problems with it not directly related to the asm code itself, and the gigabeat doesn't profit from it, probably because the CPU isn't the bottleneck even without optimisation.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12099 a1c6a512-1295-4272-9138-f99709370657
|
|
performance on all ARM targets, especially iPod 5G
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12000 a1c6a512-1295-4272-9138-f99709370657
|
|
bootloader and rockbox with audio.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11850 a1c6a512-1295-4272-9138-f99709370657
|
|
the same USB hardware. Add register defines for the USB hardware addresses, based off the Freescale i.MX31 datasheet. Use usb_init() from the iPod code, but modified to use the new register defines rather than oul/inl on the hardware addresses.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11823 a1c6a512-1295-4272-9138-f99709370657
|
|
OF and Rockbox. Rolo also works.
Changes made:
Combine bootloader/h10.c and bootloader/e200.c into a common bootloader file (bootloader/main-pp.c) to be used by all mi4 based PortalPlayer targets. The file bootloader/main-pp.c is based off the old bootloader/h10.c with some minor changes to allow it to work on the Sansa too. This effectively adds a Sansa bootloader.
Define MODEL_NAME string in config-*.h for use in bootloader.
Split crt0-pp.S into separate files for bootloader and normal builds. Bootloader code is now in crt0-pp-bl.S while normal build code stays in crt0-pp.S.
Improvements to crt0-pp.S and crt0-pp-bl.S (mostly to make it more multiprocessor safe):
* Leave space in bootloader at 0xe0-0xeb since scramble writes over there when it creates the mi4 file (don't leave space for iPods since it's not needed and all code in crt0-pp-bl.S needs to fit before the boot_table at 0x100).
* Remove unused DEBUG and STUB code from crt0-pp.S.
* Make CPU wait for COP to be sleeping when we put the COP to sleep.
* Invalidate COP cache when COP wakes
* Flush CPU cache before waking COP
* Make sure only the CPU clears the BSS (not the COP)
* Make sure only the CPU sets up its own stack (not the COP)
Rolo works on H10, so enable it.
Make Sansa e200 use rockbox.e200 rather than PP5022.mi4 for 'Normal' builds. This makes updating rockbox simpler as we don't need to go through the firmware update procedure, but rather just put a new rockbox.e200 on the device. rockbox.e200 uses a simple 'add' checksum.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11815 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11799 a1c6a512-1295-4272-9138-f99709370657
|
|
Color, iPod Nano).
* Fix failed compile of enc_config.c when HAVE_MPEG2_SAMPR is not defined.
* Fix bug in AIFF encoder header creation on little endian targets.
* Add recording screen keymaps for H10 and iPod.
* Move pcm_playback PP specific code to target tree.
* Add recording code to wmcodec drivers.
* Add pcm_record code.
Some problems still remain:
* Playback doesn't work after recording until Rockbox is restarted.
* Gain control not implemented.
* Only 16-bit/44KHz for now. The hardware should be capable of up to 24-bit/96KHz.
* Line-in recording not tested on H10.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11794 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11700 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11655 a1c6a512-1295-4272-9138-f99709370657
|
|
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11614 a1c6a512-1295-4272-9138-f99709370657
|