| Age | Commit message (Collapse) | Author |
|---|
|
Change-Id: I000c78e913ab80afa9b82cae937afb5255831b79
|
|
(the pointer is _always_ valid as it's to a fixed buffer)
Change-Id: I88489012b76ed3b5b214cf01da1a6260e259fe87
|
|
Allow the talk file to be unloaded
Change-Id: I7633c213f1bf7135894aed43171ea683e2867954
|
|
Change-Id: I415cf235d2b179ae8c58b0427308103be3e00130
|
|
Internally, buffering tries to load the entire album art file into the
audio buffer, which will fail if the file is larger than the buffer.
Playback.c interprets a file failing to buffer to mean that the buffer
is full, so it waits for more space and tries again. This results in a
deadlock since the file will never fit.
Change bufopen to return a new error condition when an image file will
not fit on the buffer because it is too large: ERR_BITMAP_TOO_LARGE.
Note that we arbitrarily set "too large" to be within 64KB of the
entire buffer size or larger, this could be adjusted if needed.
Change audio_load_albumart to pass through error messages from bufopen.
In playback.c, check to see why audio_load_albumart fails. If it fails
because the file is too large to buffer, simply ignore the file. If it
fails because the file would fit but the buffer is full, try again
later.
Change-Id: I66799ae26f124b495e1522fce7285332f4cf986f
|
|
hotplugging hp and lineout works, without blowing out eardrums.
Change-Id: I2df5c7a618bb2d1d77d416548d45dff9cfc619db
|
|
* xduoo x3ii/x20: Better line out support
* less granular volume settings (too many steps before)
* Better handling of swiching sample rates
* Log actual sample rate in debug menu
Most credit goes to Roman Stolyarov
Additional integration [re]work by myself
Change-Id: I63af3740678cf2ed3170f61534e1029c81826bb6
|
|
* SAMPR_CAPS_ALL -> SAMPR_CAPS_ALL_48/96/192
* All targets claiming SAMPR_CAPS_ALL now get appropriate subset
* No need to explicitly define HAVE_PLAY_FREQ
* Rates that are a multiple of 44 or 48KHz can be used for playback
Inspired by a patch by Roman Stolyarov, but substantially rewritten by myself.
Change-Id: Iaca7363521b1cb9921e047ba1004d3cbe9c9c23e
|
|
Change-Id: I0fdc5d32225decbf051685be819be8df84171998
|
|
Note: I left behind lcd_bitmap in features.txt, because removing it
would require considerable work in the manual and the translations.
Change-Id: Ia8ca7761f610d9332a0d22a7d189775fb15ec88a
|
|
Change-Id: I413989858432cd206e09d6d71dec07b4f7e06836
|
|
Change-Id: I9d20b8bfd0f1e47f33ca402f80a9e08bd00fbcd8
|
|
Unifies time formatting in settings_list.c allows time format to
display as HH:MM:SS.MSS or any consecutive combination thereof
(hh:mm:ss, mm:ss, mm:ss.mss, ss.mss, hh, mm, ss ,mss)
works in INT and TABLE settings with the addition of flag 'F_TIME_SETTING'
Time is auto-ranged dependent on value
Adds talk_time_intervals to allow time values to be spoken similar to
display format: x Hours, x Minutes, x Seconds, x Milliseconds
Table lookups merged or removed from recording, clip meter and lcd timeout
-String_Choice replaced with TABLE_SETTING or INT_SETTING for these
functions as well, cleaned-up cfg_vals that get saved to cfgfile
RTL Languages ARE supported
Negative values ARE supported
Backlight on/off are now Always and Never to share formatter with LCD
Timeout
Added flag to allow ranged units to be locked to a minimum index
Added flag to allow leading zero to be supressed from the largest unit
merged talk_time_unit() and talk_time_intervals()
optimized time_split()
optimized format_time_auto()
Backlight time-out list same as original
Change-Id: I59027c62d3f2956bd16fdcc1a48b2ac32c084abd
|
|
changes return to unsigned int to match underlying aliased function
Change-Id: I7015c7ad929344441249aa7c4f2af361142fcaf4
|
|
Playback checked the files' presence before attempting to buffer
the track. Just get rid of that and save an extra open/close call.
It will find out if the path is bad when the metadata fails.
Fix some size_t/off_t conflation. No need to update plugin version
because no plugin actually uses bufopen().
Change-Id: I3db112449dc0b2eeb91c546f308880ac82494fc7
|
|
It must be set to something else valid (unless it's the only one
left) when closing it, IN ALL CASES, not just if it's first or last.
Don't know what was in my head. Hopefully takes care of a reported
issue. Even if it's not causing any issues, it was still incorrect.
Change-Id: I594af8b35d774ec222dadce80dfa8b95138f037e
|
|
Purpose: A step in removing all voice references from playback code
and prelude to other changes.
Change-Id: Ic3ad7f7a33b979693e18a3456ced37eb1d2281a4
|
|
Change-Id: I4c63efc6570368df76b6c4bbfb5b673dd081145b
|
|
Does away the statically-allocated track list which frees quite
a fair amount of in-RAM size.
There's no compile-time hard track limit.
Recommended TODO (but not right away): Have data small enough use
the handle structure as its buffer data area. Almost the entire
handle structure is unused for simple allocations without any
associated filesystem path.
Change-Id: I74a4561e5a837e049811ac421722ec00dadc0d50
|
|
If in the middle of a manual skip, playback would try to seek, and
therefore start, the codec before the audio handle was available.
This wasn't really a problem since the codec would just bail out
and be retried later. But, it is a problem for a change I was working
on with seeking where the codec could get caught in a full-speed
loop trying to seek itself (stoppable, not lockup).
The main side effect of this change that you may notice, if using an
HDD with dircache turned on and the disk is not spinning, is that you
can keep holding down prev/next if dir skipping and the WPS will
start FF/RW mode. By the time the new track shows up, you will have
seeked into it some amount.
Well, the PBE is getting the info ASAP anyway and as far as it's
concerned, the next track is under way. On that end of things, it's
correct. Perhaps WPS should lock out its own seek mode at certain
times.
Change-Id: Ifc7409a886df399cec189d1bae2adba3872e857a
|
|
Change-Id: Ie6d571ef217246e22b465ef39097ad9d9d1a6436
|
|
It isn't necessary to explicitly stop and restart playback to
force it to update something that must cause rebuffering.
Change-Id: I6ff5394fcafc7374af67ef9fbf9022bb4a79b773
|
|
Forced audio start was left out when a third codec attempts to
start a second track transition. Only one pending transition is
allowed at a time. There wouldn't be enough PCM in the buffer to
trigger audio playback and audio would just return without giving
the pcm buffer a kick.
Fixes FS#13100 - Player failed on short tracks
Change-Id: I338b0b12022c591930451fd5ed26a2a73008835f
|
|
|
|
Reorganization
- Separated iBasso devices from PLATFORM_ANDROID. These are now standlone
hosted targets. Most device specific code is in the
firmware/target/hosted/ibasso directory.
- No dependency on Android SDK, only the Android NDK is needed.
32 bit Android NDK and Android API Level 16.
- Separate implementation for each device where feasible.
Code cleanup
- Rewrite of existing code, from simple reformat to complete reimplementation.
- New backlight interface, seperating backlight from touchscreen.
- Rewrite of device button handler, removing unneeded code and fixing memory
leaks.
- New Debug messages interface logging to Android adb logcat (DEBUGF, panicf,
logf).
- Rewrite of lcd device handler, removing unneeded code and fixing memory leaks.
- Rewrite of audiohw device handler/pcm interface, removing unneeded code and
fixing memory leaks, enabling 44.1/48kHz pthreaded playback.
- Rewrite of power and powermng, proper shutdown, using batterylog results
(see http://gerrit.rockbox.org/r/#/c/1047/).
- Rewrite of configure (Android NDK) and device specific config.
- Rewrite of the Android NDK specific Makefile.
Misc
- All plugins/games/demos activated.
- Update tinyalsa to latest from https://github.com/tinyalsa/tinyalsa.
Includes
- http://gerrit.rockbox.org/r/#/c/993/
- http://gerrit.rockbox.org/r/#/c/1010/
- http://gerrit.rockbox.org/r/#/c/1035/
Does not include http://gerrit.rockbox.org/r/#/c/1007/ due to new backlight
interface and new option for hold switch, touchscreen, physical button
interaction.
Rockbox needs the iBasso DX50/DX90 loader for startup, see
http://gerrit.rockbox.org/r/#/c/1099/
The loader expects Rockbox to be installed in /mnt/sdcard/.rockbox/. If
/mnt/sdcard/ is accessed as USB mass storage device, Rockbox will exit
gracefully and the loader will restart Rockbox on USB disconnect.
Tested on iBasso DX50.
Compiled (not tested) for iBasso DX90.
Compiled (not tested) for PLATFORM_ANDROID.
Change-Id: I5f5e22e68f5b4cf29c28e2b40b2c265f2beb7ab7
|
|
Change-Id: Ieb77a7f2cdf765afa3121320d03c0478cd97eb0f
|
|
HAVE_IO_PRIORITY was defined for native targets with dircache.
It is already effectively disabled for the most part since dircache no
longer lowers its thread's I/O priority. It existed primarily for the
aforementioned configuration.
Change-Id: Ia04935305397ba14df34647c8ea29c2acaea92aa
|
|
Invalid event data would be accessed if a play message isn't queued
which will cause crash problems.
It came about in the addition of time-based resume.
Change-Id: I1d5219064e2bf552b4183e9db4e7b380ffbe7a67
|
|
add_event_ex is added that takes an extra user_data pointer. This pointer is
passed to the callback (add_event and add_event_ex have slightly different
callbacks types). All callbacks also get the event id passed. Events added
with add_event_ex must be removed with remove_event_ex because the user_data
pointer must match in addition to the callback pointer.
On the other add_event is simplified to omit the oneshort parameter which
was almost always false (still there with add_event_ex).
As a side effect the ata_idle_notify callbacks are changed as well, they
do not take a data parameter anymore which was always NULL anyway.
This commit also adds some documentation to events.h
Change-Id: I13e29a0f88ef908f175b376d83550f9e0231f772
|
|
This complements offset-based resume and playback start funcionality.
The implementation is global on both HWCODEC and SWCODEC.
Basically, if either the specified elapsed or offset are non-zero,
it indicates a mid-track resume.
To resume by time only, set elapsed to nonzero and offset to zero.
To resume by offset only, set offset to nonzero and elapsed to zero.
Which one the codec uses and which has priority is up to the codec;
however, using an elapsed time covers more cases:
* Codecs not able to use an offset such as VGM or other atomic
formats
* Starting playback at a nonzero elapsed time from a source that
contains no offset, such as a cuesheet
The change re-versions pretty much everything from tagcache to nvram.
Change-Id: Ic7aebb24e99a03ae99585c5e236eba960d163f38
Reviewed-on: http://gerrit.rockbox.org/516
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested: Michael Sevakis <jethead71@rockbox.org>
|
|
This fixes the radioart crash that was the result of buffering.c working
on a freed buffer at the same time as buflib (radioart uses buffering.c for the
images). With this change the buffer is owned by buflib exclusively so this
cannot happen.
As a result, audio_get_buffer() doesn't exist anymore. Callers should call
core_alloc_maximum() directly. This buffer needs to be protected as usual
against movement if necessary (previously it was not protected at all which
cased the radioart crash), To get most of it they can adjust the willingness of
the talk engine to give its buffer away (at the expense of disabling voice
interface) with the new talk_buffer_set_policy() function.
Change-Id: I52123012208d04967876a304451d634e2bef3a33
|
|
Change-Id: I01154d4a9441f44852748c910c267419f7f4149e
|
|
* Remove explicit tracking of elapsed time of previous track.
* Remove function to obtain auto skip flag.
* Most playback events now carry the extra information instead and
pass 'struct track_event *' for data.
* Tweak scrobbler to use PLAYBACK_EVENT_TRACK_FINISH, which makes
it cleaner and removes the struct mp3entry.
Change-Id: I500d2abb4056a32646496efc3617406e36811ec5
|
|
Replaces the NATIVE_FREQUENCY constant with a configurable frequency.
The user may select 48000Hz if the hardware supports it. The default is
still 44100Hz and the minimum is 44100Hz. The setting is located in the
playback settings, under "Frequency".
"Frequency" was duplicated in english.lang for now to avoid having to
fix every .lang file for the moment and throwing everything out of sync
because of the new play_frequency feature in features.txt. The next
cleanup should combine it with the one included for recording and
generalize the ID label.
If the hardware doesn't support 48000Hz, no setting will be available.
On particular hardware where very high rates are practical and desireable,
the upper bound can be extended by patching.
The PCM mixer can be configured to play at the full hardware frequency
range. The DSP core can configure to the hardware minimum up to the
maximum playback setting (some buffers must be reserved according to
the maximum rate).
If only 44100Hz is supported or possible on a given target for playback,
using the DSP and mixer at other samperates is possible if the hardware
offers them.
Change-Id: I6023cf0c0baa8bc6292b6919b4dd3618a6a25622
Reviewed-on: http://gerrit.rockbox.org/479
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested-by: Michael Sevakis <jethead71@rockbox.org>
|
|
Change-Id: Ie7b04ecf3b3535e0ed45a6e0e8d81af89e38378e
|
|
Basically, just give it a good rewrite.
Software codec recording can be implemented in a more straightforward
and simple manner and made more robust through the better codec
control now available.
Encoded audio buffer uses a packed format instead of fixed-size
chunks and uses smaller data headers leading to more efficient usage.
The greatest benefit is with a VBR format like wavpack which needs
to request a maximum size but only actually ends up committing part
of that request.
No guard buffers are used for either PCM or encoded audio. PCM is
read into the codec's provided buffer and mono conversion done at
that time in the core if required. Any highly-specialized sample
conversion is still done within the codec itself, such as 32-bit
(wavpack) or interleaved mono (mp3).
There is no longer a separate filename array. All metadata goes
onto the main encoded audio buffer, eliminating any predermined
file limit on the buffer as well as not wasting the space for
unused path queue slots.
The core and codec interface is less awkward and a bit more sensible.
Some less useful interface features were removed. Threads are kept
on narrow code paths ie. the audio thread never calls encoding
functions and the codec thread never calls file functions as before.
Codecs no longer call file functions directly. Writes are buffered
in the core and data written to storage in larger chunks to speed up
flushing of data. In fact, codecs are no longer aware of the stream
being a file at all and have no access to the fd.
SPDIF frequency detection no longer requires a restart of recording
or plugging the source before entering the screen. It will poll
for changes and update when stopped or prerecording (which does
discard now-invalid prerecorded data).
I've seen to it that writing a proper header on full disk works
when the format makes it reasonably practical to do so. Other cases
may have incorrect data sizes but sample info will be in tact. File
left that way may play anyway.
mp3_enc.codec acquires the ability to write 'Info' headers with LAME
tags to make it gapless (bonus).
Change-Id: I670685166d5eb32ef58ef317f50b8af766ceb653
Reviewed-on: http://gerrit.rockbox.org/493
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested-by: Michael Sevakis <jethead71@rockbox.org>
|
|
Change-Id: Ie3f43e43076e0dcae9a10f1b0b9e4698b398acee
Reviewed-on: http://gerrit.rockbox.org/492
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested-by: Michael Sevakis <jethead71@rockbox.org>
|
|
Change-Id: I13847b99d9aeaa05efa5b22a8e4842f193f01a3c
|
|
Further decouples voice_thread.c from other playback areas. Also allows
other audio sources, such as FM radio, to be attenuated when voice is
playing by implementing a callback.
Defined as another playback event rather than a new event class:
PLAYBACK_EVENT_VOICE_PLAYING
Change-Id: I2e3e218be6cd6bebbf39e7883a8c0e4ed42b62bb
|
|
SIM should work like target, sort of, when recording is initialized.
Change-Id: I12314bb98cec53d574f4b25984ef803b2c038a96
|
|
Playback needs to receive a couple of settings-related messages even
when not playing.
Put the message reply back where it was when loading an encoder for
recording.
Change-Id: I8cc80f46e42a0afd119991d698510e1ebef38ead
|
|
Eliminates the pcmrec thread and keeps playback and recording engine
operation mutually-exclusive.
audio_thread.c contains the audio thread which branches to the
correct engine depending upon the request. It also handles the main
audio initialization.
Moves pcm_init into main.c just before dsp_init because I don't want
that one in audio_init in the new file.
(Also makes revision df6e1bc pointless ;)
Change-Id: Ifc1db24404e6d8dd9ac42d9f4dfbc207aa9a26e1
|
|
Change-Id: Icb31c8bd8605aca27765a94b609c41f1f706426f
|
|
Must restore talk buffer explicitly when not taking it and promote
the buffer state.
Change-Id: Ia0341ede05837e6e94885a9ad62460c415ec6f00
|
|
...by default where they would be interpreted as valid but not actually
be which would cause calls to buffering while it was not initialized.
Add BUFFER_EVENT_BUFFER_RESET to inform users of buffering that the
buffer is being reinitialized. Basically, this wraps all the
functionality being provided by three events (...START_PLAYBACK,
RECORDING_EVENT_START, RECORDING_EVENT_STOP) into one for radioart.c,
the only user of those events (perhaps remove them?) and closes some
loopholes.
Change-Id: I99ec46b9b5fb4e36605db5944c60ed986163db3a
|
|
Buffers are not allocated and thread is not created until the first
call where voice is required.
Adds a different callback (sync_callback) to buflib so that other
sorts of synchonization are possible, such as briefly locking-out the
PCM callback for a buffer move. It's sort of a messy addition but it
is needed so voice decoding won't have to be stopped when its buffer
is moved.
Change-Id: I4d4d8c35eed5dd15fb7ee7df9323af3d036e92b3
|
|
Moved to playback.c, since it doesn't use metadata from the music file.
Change-Id: I5c3ad7750d94b36754f64eb302f96ec163785cb9
Reviewed-on: http://gerrit.rockbox.org/142
Reviewed-by: Nils Wallménius <nils@rockbox.org>
|
|
This function has been changed to rbcodec_format_is_atomic, which
doesn't require an enum from the kernel.
Change-Id: I1d537605087fe130a9b545509d7b8a340806dbf2
Reviewed-on: http://gerrit.rockbox.org/141
Reviewed-by: Nils Wallménius <nils@rockbox.org>
Tested-by: Nils Wallménius <nils@rockbox.org>
|
|
Change-Id: Ie4884ec4554890f8bdb03f48bcf215ece00a5560
|
|
global_settings.start_directory.
When enabled, if the user has set "Start File Browser Here" (config.cfg:
start directory) to anything other than root and "Auto-Change Directory"
is set to "Yes" or "Random", the directory returned when an auto change
is required will be constrained to the value of "start directory" or below.
Change-Id: Iaab773868c4cab5a54f6ae67bdb22e84642a9e4b
Reviewed-on: http://gerrit.rockbox.org/182
Reviewed-by: Nick Peskett <rockbox@peskett.co.uk>
Tested-by: Nick Peskett <rockbox@peskett.co.uk>
|
