diff options
Diffstat (limited to 'firmware/target')
| -rw-r--r-- | firmware/target/arm/as3525/clock-target.h | 35 |
1 files changed, 28 insertions, 7 deletions
diff --git a/firmware/target/arm/as3525/clock-target.h b/firmware/target/arm/as3525/clock-target.h index 7f6b17eff4..2f2f90b24f 100644 --- a/firmware/target/arm/as3525/clock-target.h +++ b/firmware/target/arm/as3525/clock-target.h @@ -158,22 +158,38 @@ #endif /* CONFIG_CPU */ /* PCLK as Source */ - #define AS3525_DBOP_DIV (CLK_DIV(AS3525_PCLK_FREQ, AS3525_DBOP_FREQ) - 1) /*div=1/(n+1)*/ - #define AS3525_I2C_PRESCALER CLK_DIV(AS3525_PCLK_FREQ, AS3525_I2C_FREQ) - #define AS3525_I2C_FREQ 400000 - #define AS3525_SD_IDENT_DIV ((CLK_DIV(AS3525_PCLK_FREQ, AS3525_SD_IDENT_FREQ) / 2) - 1) - #define AS3525_SD_IDENT_FREQ 400000 /* must be between 100 & 400 kHz */ - #define AS3525_SSP_PRESCALER ((CLK_DIV(AS3525_PCLK_FREQ, AS3525_SSP_FREQ) + 1) & ~1) /* must be an even number */ - #define AS3525_SSP_FREQ 12000000 + #define AS3525_DBOP_DIV (CLK_DIV(AS3525_PCLK_FREQ, AS3525_DBOP_FREQ) - 1) /*div=1/(n+1)*/ + + #define AS3525_SSP_PRESCALER ((CLK_DIV(AS3525_PCLK_FREQ, AS3525_SSP_FREQ) + 1) & ~1) /* must be an even number */ +#if LCD_DEPTH > 1 + #define AS3525_SSP_PRESCALER_MAX ((CLK_DIV(AS3525_PCLK_FREQ, AS3525_SSP_FREQ_MIN) + 1) & ~1)/* must be an even number */ + #define AS3525_SSP_FREQ_MIN 2000000 /* 2 MHz gives a decent refresh rate on clipzip*/ +#else + #define AS3525_SSP_PRESCALER_MAX 0xFE & ~1 /*Max value for divider - must be an even number */ + #define AS3525_SSP_FREQ_MIN AS3525_SSP_FREQ /* No set minimum we just use max divider */ +#endif + #define AS3525_SSP_FREQ 12000000 + + #define AS3525_I2C_PRESCALER CLK_DIV(AS3525_PCLK_FREQ, AS3525_I2C_FREQ) + #define AS3525_I2C_PRESCALER_MAX 0xFF | 0x300 /* Max value for prescaler */ + #define AS3525_I2C_FREQ 400000 + + #define AS3525_SD_IDENT_DIV ((CLK_DIV(AS3525_PCLK_FREQ, AS3525_SD_IDENT_FREQ) / 2) - 1) + #define AS3525_SD_IDENT_FREQ 400000 /* must be between 100 & 400 kHz */ + #define AS3525_IDE_SEL AS3525_CLK_PLLA /* Input Source */ #define AS3525_IDE_DIV (CLK_DIV(AS3525_PLLA_FREQ, AS3525_IDE_FREQ) - 1)/*div=1/(n+1)*/ +#define AS3525_IDE_DIV_MAX 0xF /* Max value for divider */ #if CONFIG_CPU == AS3525v2 #define AS3525_MS_FREQ 120000000 #define AS3525_MS_DIV (CLK_DIV(AS3525_PLLA_FREQ, AS3525_MS_FREQ) -1) + #define AS3525_SDSLOT_FREQ 24000000 #define AS3525_SDSLOT_DIV (CLK_DIV(AS3525_PLLA_FREQ, AS3525_SDSLOT_FREQ) -1) +#define AS3525_SDSLOT_DIV_MAX 0xF /* Max value for divider */ + #define AS3525_IDE_FREQ 80000000 #else #define AS3525_IDE_FREQ 50000000 /* The OF uses 66MHz maximal freq */ @@ -211,6 +227,10 @@ #error SSP frequency is too low : clock divider will not fit ! #endif +#if (((CLK_DIV(AS3525_PCLK_FREQ, AS3525_SSP_FREQ_MIN)) + 1 ) & ~1) >= (1<<8) /* 8 bits */ +#error SSP_MIN frequency is too low : clock divider will not fit ! +#endif + /* AS3525_SD_IDENT_FREQ */ #if ((CLK_DIV(AS3525_PCLK_FREQ, AS3525_SD_IDENT_FREQ) / 2) - 1) >= (1<<8) /* 8 bits */ #error SD IDENTIFICATION frequency is too low : clock divider will not fit ! @@ -227,3 +247,4 @@ #endif #endif /* CLOCK_TARGET_H */ + |