1 files changed, 46 insertions, 0 deletions
diff --git a/firmware/target/arm/rk27xx/hm60x/button-hm60x.c b/firmware/target/arm/rk27xx/hm60x/button-hm60x.c
new file mode 100644
index 0000000000..eaadaa131c
--- /dev/null
+++ b/firmware/target/arm/rk27xx/hm60x/button-hm60x.c
@@ -0,0 +1,46 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright (C) 2011 Andrew Ryabinin
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+
+#include "config.h"
+#include "system.h"
+#include "button.h"
+#include "adc.h"
+
+void button_init_device(void) {
+    /* setup button gpio as input */
+    GPIO_PCCON &= ~(POWEROFF_BUTTON);
+}
+
+int button_read_device(void) {
+    int adc_val = adc_read(ADC_BUTTONS);
+    if (adc_val < 30) {
+        return BUTTON_UP | (GPIO_PCDR & POWEROFF_BUTTON);
+    } else if (adc_val < 250) {
+        return BUTTON_RIGHT | (GPIO_PCDR & POWEROFF_BUTTON);
+    } else if (adc_val < 380) {
+        return BUTTON_LEFT | (GPIO_PCDR & POWEROFF_BUTTON);
+    } else if (adc_val < 450) {
+        return BUTTON_DOWN | (GPIO_PCDR & POWEROFF_BUTTON);
+    } else if (adc_val < 560) {
+        return BUTTON_PLAY | (GPIO_PCDR & POWEROFF_BUTTON);
+    }
+    return (GPIO_PCDR & POWEROFF_BUTTON);
+}