User's Manual ############# Introduction ************ Music Player Daemon (:program:`MPD`) is a flexible, powerful, server-side application for playing music. Through plugins and libraries it can play a variety of sound files while being controlled by its network protocol. This document is work in progress. Most of it may be incomplete yet. Please help! Installation ************ Installing on Debian/Ubuntu --------------------------- Install the package :file:`mpd` via :program:`apt`: .. code-block:: none apt install mpd When installed this way, :program:`MPD` by default looks for music in :file:`/var/lib/mpd/music/`; this may not be correct. Look at your :file:`/etc/mpd.conf` file... .. note:: Debian and Ubuntu are infamous for shipping heavily outdated software. The :program:`MPD` version in their respective stable releases are usually too old to be supported by this project. Ironically, the :program:`MPD` version in Debian "*unstable*" is more stable than the version in Debian "*stable*". Installing on Android --------------------- An experimental Android build is available on Google Play. After installing and launching it, :program:`MPD` will scan the music in your Music directory and you can control it as usual with a :program:`MPD` client. If you need to tweak the configuration, you can create a file called :file:`mpd.conf` on the data partition (the directory which is returned by Android's :dfn:`getExternalStorageDirectory()` API function). ALSA is not available on Android; only the :ref:`OpenSL ES ` output plugin can be used for local playback. Compiling from source --------------------- `Download the source tarball `_ and unpack it (or `clone the git repository `_): .. code-block:: none tar xf mpd-version.tar.xz cd mpd-version In any case, you need: * a C++17 compiler (e.g. GCC 8 or clang 7) * `Meson 0.49.0 `__ and `Ninja `__ * Boost 1.58 * pkg-config Each plugin usually needs a codec library, which you also need to install. Check the :doc:`plugins` for details about required libraries For example, the following installs a fairly complete list of build dependencies on Debian Buster: .. code-block:: none apt install meson g++ \ libfmt-dev \ libpcre3-dev \ libmad0-dev libmpg123-dev libid3tag0-dev \ libflac-dev libvorbis-dev libopus-dev libogg-dev \ libadplug-dev libaudiofile-dev libsndfile1-dev libfaad-dev \ libfluidsynth-dev libgme-dev libmikmod-dev libmodplug-dev \ libmpcdec-dev libwavpack-dev libwildmidi-dev \ libsidplay2-dev libsidutils-dev libresid-builder-dev \ libavcodec-dev libavformat-dev \ libmp3lame-dev libtwolame-dev libshine-dev \ libsamplerate0-dev libsoxr-dev \ libbz2-dev libcdio-paranoia-dev libiso9660-dev libmms-dev \ libzzip-dev \ libcurl4-gnutls-dev libyajl-dev libexpat-dev \ libasound2-dev libao-dev libjack-jackd2-dev libopenal-dev \ libpulse-dev libshout3-dev \ libsndio-dev \ libmpdclient-dev \ libnfs-dev \ libupnp-dev \ libavahi-client-dev \ libsqlite3-dev \ libsystemd-dev \ libgtest-dev \ libboost-dev \ libicu-dev \ libchromaprint-dev \ libgcrypt20-dev Now configure the source tree: .. code-block:: none meson . output/release --buildtype=debugoptimized -Db_ndebug=true The following command shows a list of compile-time options: .. code-block:: none meson configure output/release When everything is ready and configured, compile: .. code-block:: none ninja -C output/release And install: .. code-block:: none ninja -C output/release install Compiling for Windows --------------------- Even though it does not "feel" like a Windows application, :program:`MPD` works well under Windows. Its build process follows the "Linux style" and may seem awkward for Windows people (who are not used to compiling their software, anyway). Basically, there are two ways to compile :program:`MPD` for Windows: * Build as described above: with :program:`meson` and :program:`ninja`. To cross-compile from Linux, you need `a Meson cross file `__. The remaining difficulty is installing all the external libraries. And :program:`MPD` usually needs many, making this method cumbersome for the casual user. * Build on Linux for Windows using :program:`MPD`'s library build script. This section is about the latter. You need: * `mingw-w64 `__ * `Meson 0.49.0 `__ and `Ninja `__ * cmake * pkg-config * quilt Just like with the native build, unpack the :program:`MPD` source tarball and change into the directory. Then, instead of :program:`meson`, type: .. code-block:: none mkdir -p output/win64 cd output/win64 ../../win32/build.py --64 This downloads various library sources, and then configures and builds :program:`MPD` (for x64; to build a 32 bit binary, pass :code:`--32`). The resulting EXE files is linked statically, i.e. it contains all the libraries already and you do not need carry DLLs around. It is large, but easy to use. If you wish to have a small mpd.exe with DLLs, you need to compile manually, without the :file:`build.py` script. Compiling for Android --------------------- :program:`MPD` can be compiled as an Android app. It can be installed easily with Google Play, but if you want to build it from source, follow this section. You need: * Android SDK * `Android NDK r22 `_ * `Meson 0.49.0 `__ and `Ninja `__ * cmake * pkg-config * quilt Just like with the native build, unpack the :program:`MPD` source tarball and change into the directory. Then, instead of :program:`meson`, type: .. code-block:: none mkdir -p output/android cd output/android ../../android/build.py SDK_PATH NDK_PATH ABI meson configure -Dandroid_debug_keystore=$HOME/.android/debug.keystore ninja android/apk/mpd-debug.apk :envvar:`SDK_PATH` is the absolute path where you installed the Android SDK; :envvar:`NDK_PATH` is the Android NDK installation path; ABI is the Android ABI to be built, e.g. ":code:`arm64-v8a`". This downloads various library sources, and then configures and builds :program:`MPD`. Configuration ************* The Configuration File ---------------------- :program:`MPD` reads its configuration from a text file. Usually, that is :file:`/etc/mpd.conf`, unless a different path is specified on the command line. If you run :program:`MPD` as a user daemon (and not as a system daemon), the configuration is read from :file:`$XDG_CONFIG_HOME/mpd/mpd.conf` (usually :file:`~/.config/mpd/mpd.conf`). On Android, :file:`mpd.conf` will be loaded from the top-level directory of the data partition. Each line in the configuration file contains a setting name and its value, e.g.: :code:`connection_timeout "5"` For settings which specify a filesystem path, the tilde is expanded: :code:`music_directory "~/Music"` Some of the settings are grouped in blocks with curly braces, e.g. per-plugin settings: .. code-block:: none audio_output { type "alsa" name "My ALSA output" device "iec958:CARD=Intel,DEV=0" mixer_control "PCM" } The :code:`include` directive can be used to include settings from another file; the given file name is relative to the current file: .. code-block:: none include "other.conf" You can use :code:`include_optional` instead if you want the included file to be optional; the directive will be ignored if the file does not exist: .. code-block:: none include_optional "may_not_exist.conf" Configuring the music directory ------------------------------- When you play local files, you should organize them within a directory called the "music directory". This is configured in :program:`MPD` with the music_directory setting. By default, :program:`MPD` follows symbolic links in the music directory. This behavior can be switched off: :code:`follow_outside_symlinks` controls whether :program:`MPD` follows links pointing to files outside of the music directory, and :code:`follow_inside_symlinks` lets you disable symlinks to files inside the music directory. Instead of using local files, you can use storage plugins to access files on a remote file server. For example, to use music from the SMB/CIFS server ":file:`myfileserver`" on the share called "Music", configure the music directory ":file:`smb://myfileserver/Music`". For a recipe, read the Satellite :program:`MPD` section :ref:`satellite`. You can also use multiple storage plugins to assemble a virtual music directory consisting of multiple storages. Configuring database plugins ---------------------------- If a music directory is configured, one database plugin is used. To configure this plugin, add a :code:`database` block to :file:`mpd.conf`: .. code-block:: none database { plugin "simple" path "/var/lib/mpd/db" } More information can be found in the :ref:`database_plugins` reference. Configuring neighbor plugins ---------------------------- All neighbor plugins are disabled by default to avoid unwanted overhead. To enable (and configure) a plugin, add a :code:`neighbor` block to :file:`mpd.conf`: .. code-block:: none neighbors { plugin "smbclient" } More information can be found in the :ref:`neighbor_plugin` reference. Configuring input plugins ------------------------- To configure an input plugin, add an :code:`input` block to :file:`mpd.conf`: .. code-block:: none input { plugin "curl" proxy "proxy.local" } The following table lists the input options valid for all plugins: .. list-table:: :widths: 20 80 :header-rows: 1 * - Name - Description * - **plugin** - The name of the plugin * - **enabled yes|no** - Allows you to disable a input plugin without recompiling. By default, all plugins are enabled. More information can be found in the :ref:`input_plugins` reference. .. _input_cache: Configuring the Input Cache ^^^^^^^^^^^^^^^^^^^^^^^^^^^ The input cache prefetches queued song files before they are going to be played. This has several advantages: - risk of buffer underruns during playback is reduced because this decouples playback from disk (or network) I/O - bulk transfers may be faster and more energy efficient than loading small chunks on-the-fly - by prefetching several songs at a time, the hard disk can spin down for longer periods of time This comes at a cost: - memory usage - bulk transfers may reduce the performance of other applications which also want to access the disk (if the kernel's I/O scheduler isn't doing its job properly) To enable the input cache, add an ``input_cache`` block to the configuration file: .. code-block:: none input_cache { size "1 GB" } This allocates a cache of 1 GB. If the cache grows larger than that, older files will be evicted. You can flush the cache at any time by sending ``SIGHUP`` to the :program:`MPD` process, see :ref:`signals`. Configuring decoder plugins --------------------------- Most decoder plugins do not need any special configuration. To configure a decoder, add a :code:`decoder` block to :file:`mpd.conf`: .. code-block:: none decoder { plugin "wildmidi" config_file "/etc/timidity/timidity.cfg" } The following table lists the decoder options valid for all plugins: .. list-table:: :widths: 20 80 :header-rows: 1 * - Name - Description * - **plugin** - The name of the plugin * - **enabled yes|no** - Allows you to disable a decoder plugin without recompiling. By default, all plugins are enabled. More information can be found in the :ref:`decoder_plugins` reference. Configuring encoder plugins --------------------------- Encoders are used by some of the output plugins (such as shout). The encoder settings are included in the ``audio_output`` section, see :ref:`config_audio_output`. More information can be found in the :ref:`encoder_plugins` reference. .. _config_audio_output: Configuring audio outputs ------------------------- Audio outputs are devices which actually play the audio chunks produced by :program:`MPD`. You can configure any number of audio output devices, but there must be at least one. If none is configured, :program:`MPD` attempts to auto-detect. Usually, this works quite well with ALSA, OSS and on Mac OS X. To configure an audio output manually, add one or more :code:`audio_output` blocks to :file:`mpd.conf`: .. code-block:: none audio_output { type "alsa" name "my ALSA device" device "hw:0" } The following table lists the audio_output options valid for all plugins: .. list-table:: :widths: 20 80 :header-rows: 1 * - Name - Description * - **type** - The name of the plugin * - **name** - The name of the audio output. It is visible to the client. Some plugins also use it internally, e.g. as a name registered in the PULSE server. * - **format samplerate:bits:channels** - Always open the audio output with the specified audio format, regardless of the format of the input file. This is optional for most plugins. See :ref:`audio_output_format` for a detailed description of the value. * - **enabled yes|no** - Specifies whether this audio output is enabled when :program:`MPD` is started. By default, all audio outputs are enabled. This is just the default setting when there is no state file; with a state file, the previous state is restored. * - **tags yes|no** - If set to no, then :program:`MPD` will not send tags to this output. This is only useful for output plugins that can receive tags, for example the httpd output plugin. * - **always_on yes|no** - If set to yes, then :program:`MPD` attempts to keep this audio output always open. This may be useful for streaming servers, when you don't want to disconnect all listeners even when playback is accidentally stopped. * - **mixer_type hardware|software|null|none** - Specifies which mixer should be used for this audio output: the hardware mixer (available for ALSA :ref:`alsa_plugin`, OSS :ref:`oss_plugin` and PulseAudio :ref:`pulse_plugin`), the software mixer, the ":samp:`null`" mixer (allows setting the volume, but with no effect; this can be used as a trick to implement an external mixer, see :ref:`external_mixer`) or no mixer (:samp:`none`). By default, the hardware mixer is used for devices which support it, and none for the others. * - **filters "name,...**" - The specified configured filters are instantiated in the given order. Each filter name refers to a ``filter`` block, see :ref:`config_filter`. More information can be found in the :ref:`output_plugins` reference. .. _config_filter: Configuring filters ------------------- Filters are plugins which modify an audio stream. To configure a filter, add a :code:`filter` block to :file:`mpd.conf`: .. code-block:: none filter { plugin "volume" name "software volume" } Configured filters may then be added to the ``filters`` setting of an ``audio_output`` section, see :ref:`config_audio_output`. The following table lists the filter options valid for all plugins: .. list-table:: :widths: 20 80 :header-rows: 1 * - Name - Description * - **plugin** - The name of the plugin * - **name** - The name of the filter More information can be found in the :ref:`filter_plugins` reference. Configuring playlist plugins ---------------------------- Playlist plugins are used to load remote playlists (protocol commands load, listplaylist and listplaylistinfo). This is not related to :program:`MPD`'s :ref:`playlist directory `. To configure a playlist plugin, add a :code:`playlist_plugin` block to :file:`mpd.conf`: .. code-block:: none playlist_plugin { name "m3u" enabled "true" } The following table lists the playlist_plugin options valid for all plugins: .. list-table:: :widths: 20 80 :header-rows: 1 * - Name - Description * - **plugin** - The name of the plugin * - **enabled yes|no** - Allows you to disable a playlist plugin without recompiling. By default, all plugins are enabled. * - **as_directory yes|no** - With this option, a playlist file of this type is parsed during database update and converted to a virtual directory, allowing MPD clients to access individual entries. By default, this is only enabled for the :ref:`cue plugin `. More information can be found in the :ref:`playlist_plugins` reference. Audio Format Settings --------------------- .. _audio_output_format: Global Audio Format ^^^^^^^^^^^^^^^^^^^ The setting ``audio_output_format`` forces :program:`MPD` to use one audio format for all outputs. Doing that is usually not a good idea. The value is specified as ``samplerate:bits:channels``. Any of the three attributes may be an asterisk to specify that this attribute should not be enforced, example: ``48000:16:*``. ``*:*:*`` is equal to not having a format specification. The following values are valid for bits: ``8`` (signed 8 bit integer samples), ``16``, ``24`` (signed 24 bit integer samples padded to 32 bit), ``32`` (signed 32 bit integer samples), ``f`` (32 bit floating point, -1.0 to 1.0), ``dsd`` means DSD (Direct Stream Digital). For DSD, there are special cases such as ``dsd64``, which allows you to omit the sample rate (e.g. ``dsd512:2`` for stereo DSD512, i.e. 22.5792 MHz). The sample rate is special for DSD: :program:`MPD` counts the number of bytes, not bits. Thus, a DSD "bit" rate of 22.5792 MHz (DSD512) is 2822400 from :program:`MPD`'s point of view (44100*512/8). Resampler ^^^^^^^^^ Sometimes, music needs to be resampled before it can be played; for example, CDs use a sample rate of 44,100 Hz while many cheap audio chips can only handle 48,000 Hz. Resampling reduces the quality and consumes a lot of CPU. There are different options, some of them optimized for high quality and others for low CPU usage, but you can't have both at the same time. Often, the resampler is the component that is responsible for most of :program:`MPD`'s CPU usage. Since :program:`MPD` comes with high quality defaults, it may appear that :program:`MPD` consumes more CPU than other software. Check the :ref:`resampler_plugins` reference for a list of resamplers and how to configure them. Client Connections ------------------ .. _listeners: Listeners ^^^^^^^^^ The setting :code:`bind_to_address` specifies which addresses :program:`MPD` listens on for connections from clients. It can be used multiple times to bind to more than one address. Example:: bind_to_address "192.168.1.42" bind_to_address "127.0.0.1" The default is "any", which binds to all available addresses. Additionally, MPD binds to :code:`$XDG_RUNTIME_DIR/mpd/socket` (if it was launched as a per-user daemon and no :code:`bind_to_address` setting exists). You can set a port that is different from the global port setting, e.g. "localhost:6602". IPv6 addresses must be enclosed in square brackets if you want to configure a port:: bind_to_address "[::1]:6602" To bind to a local socket (UNIX domain socket), specify an absolute path or a path starting with a tilde (~). Some clients default to connecting to :file:`/var/run/mpd/socket` so this may be a good choice:: bind_to_address "/var/run/mpd/socket" On Linux, local sockets can be bound to a name without a socket inode on the filesystem; MPD implements this by prepending ``@`` to the address:: bind_to_address "@mpd" If no port is specified, the default port is 6600. This default can be changed with the port setting:: port "6601" These settings will be ignored if `systemd socket activation`_ is used. Permissions and Passwords ^^^^^^^^^^^^^^^^^^^^^^^^^ By default, all clients are unauthenticated and have a full set of permissions. This can be restricted with the settings :code:`default_permissions` and :code:`password`. :code:`default_permissions` controls the permissions of a new client. Its value is a comma-separated list of permissions: .. list-table:: :widths: 20 80 :header-rows: 1 * - Name - Description * - **read** - Allows reading of the database, displaying the current playlist, and current status of :program:`MPD`. * - **add** - Allows adding songs and loading playlists. * - **control** - Allows all other player and playlist manipulations. * - **admin** - Allows database updates and allows shutting down :program:`MPD`. :code:`local_permissions` may be used to assign other permissions to clients connecting on a local socket. :code:`password` allows the client to send a password to gain other permissions. This option may be specified multiple times with different passwords. Note that the :code:`password` option is not secure: passwords are sent in clear-text over the connection, and the client cannot verify the server's identity. Example: .. code-block:: none default_permissions "read" password "the_password@read,add,control" password "the_admin_password@read,add,control,admin" Other Settings -------------- .. _metadata_to_use: .. list-table:: :widths: 20 80 :header-rows: 1 * - Setting - Description * - **metadata_to_use TAG1,TAG2,...** - Use only the specified tags, and ignore the others. This setting can reduce the database size and :program:`MPD`'s memory usage by omitting unused tags. By default, all tags but comment are enabled. The special value "none" disables all tags. If the setting starts with ``+`` or ``-``, then the following tags will be added or remoted to/from the current set of tags. This example just enables the "comment" tag without disabling all the other supported tags metadata_to_use "+comment" Section :ref:`tags` contains a list of supported tags. The State File ^^^^^^^^^^^^^^ The state file is a file where :program:`MPD` saves and restores its state (play queue, playback position etc.) to keep it persistent across restarts and reboots. It is an optional setting. :program:`MPD` will attempt to load the state file during startup, and will save it when shutting down the daemon. Additionally, the state file is refreshed every two minutes (after each state change). .. list-table:: :widths: 20 80 :header-rows: 1 * - Setting - Description * - **state_file PATH** - Specify the state file location. The parent directory must be writable by the :program:`MPD` user (+wx). * - **state_file_interval SECONDS** - Auto-save the state file this number of seconds after each state change. Defaults to 120 (2 minutes). The Sticker Database ^^^^^^^^^^^^^^^^^^^^ "Stickers" are pieces of information attached to songs. Some clients use them to store ratings and other volatile data. This feature requires :program:`SQLite`, compile-time configure option :code:`-Dsqlite=...`. .. list-table:: :widths: 20 80 :header-rows: 1 * - Setting - Description * - **sticker_file PATH** - The location of the sticker database. Resource Limitations ^^^^^^^^^^^^^^^^^^^^ These settings are various limitations to prevent :program:`MPD` from using too many resources (denial of service). .. list-table:: :widths: 20 80 :header-rows: 1 * - Setting - Description * - **connection_timeout SECONDS** - If a client does not send any new data in this time period, the connection is closed. Clients waiting in "idle" mode are excluded from this. Default is 60. * - **max_connections NUMBER** - This specifies the maximum number of clients that can be connected to :program:`MPD` at the same time. Default is 100. * - **max_playlist_length NUMBER** - The maximum number of songs that can be in the playlist. Default is 16384. * - **max_command_list_size KBYTES** - The maximum size a command list. Default is 2048 (2 MiB). * - **max_output_buffer_size KBYTES** - The maximum size of the output buffer to a client (maximum response size). Default is 8192 (8 MiB). Buffer Settings ^^^^^^^^^^^^^^^ Do not change these unless you know what you are doing. .. list-table:: :widths: 20 80 :header-rows: 1 * - Setting - Description * - **audio_buffer_size SIZE** - Adjust the size of the internal audio buffer. Default is :samp:`4 MB` (4 MiB). Zeroconf ^^^^^^^^ If Zeroconf support (`Avahi `_ or Apple's Bonjour) was enabled at compile time with :code:`-Dzeroconf=...`, :program:`MPD` can announce its presence on the network. The following settings control this feature: .. list-table:: :widths: 20 80 :header-rows: 1 * - Setting - Description * - **zeroconf_enabled yes|no** - Enables or disables this feature. Default is yes. * - **zeroconf_name NAME** - The service name to publish via Zeroconf. The default is "Music Player @ %h". %h will be replaced with the hostname of the machine running :program:`MPD`. Advanced configuration ********************** .. _satellite: Satellite setup --------------- :program:`MPD` runs well on weak machines such as the Raspberry Pi. However, such hardware tends to not have storage big enough to hold a music collection. Mounting music from a file server can be very slow, especially when updating the database. One approach for optimization is running :program:`MPD` on the file server, which not only exports raw files, but also provides access to a readily scanned database. Example configuration: .. code-block:: none music_directory "nfs://fileserver.local/srv/mp3" #music_directory "smb://fileserver.local/mp3" database { plugin "proxy" host "fileserver.local" } The :code:`music_directory` setting tells :program:`MPD` to read files from the given NFS server. It does this by connecting to the server from userspace. This does not actually mount the file server into the kernel's virtual file system, and thus requires no kernel cooperation and no special privileges. It does not even require a kernel with NFS support, only the nfs storage plugin (using the libnfs userspace library). The same can be done with SMB/CIFS using the smbclient storage plugin (using libsmbclient). The database setting tells :program:`MPD` to pass all database queries on to the :program:`MPD` instance running on the file server (using the proxy plugin). .. _realtime: Real-Time Scheduling -------------------- On Linux, :program:`MPD` attempts to configure real-time scheduling for some threads that benefit from it. This is only possible if you allow :program:`MPD` to do it. This privilege is controlled by :envvar:`RLIMIT_RTPRIO` :envvar:`RLIMIT_RTTIME`. You can configure this privilege with :command:`ulimit` before launching :program:`MPD`: .. code-block:: none ulimit -HS -r 40; mpd Or you can use the :command:`prlimit` program from the util-linux package: .. code-block:: none prlimit --rtprio=40 --rttime=unlimited mpd The systemd service file shipped with :program:`MPD` comes with this setting. This works only if the Linux kernel was compiled with :makevar:`CONFIG_RT_GROUP_SCHED` disabled. Use the following command to check this option for your current kernel: .. code-block:: none zgrep ^CONFIG_RT_GROUP_SCHED /proc/config.gz You can verify whether the real-time scheduler is active with the ps command: .. code-block:: none # ps H -q `pidof -s mpd` -o 'pid,tid,cls,rtprio,comm' PID TID CLS RTPRIO COMMAND 16257 16257 TS - mpd 16257 16258 TS - io 16257 16259 FF 40 rtio 16257 16260 TS - player 16257 16261 TS - decoder 16257 16262 FF 40 output:ALSA 16257 16263 IDL 0 update The CLS column shows the CPU scheduler; TS is the normal scheduler; FF and RR are real-time schedulers. In this example, two threads use the real-time scheduler: the output thread and the rtio (real-time I/O) thread; these two are the important ones. The database update thread uses the idle scheduler ("IDL in ps), which only gets CPU when no other process needs it. .. note:: There is a rumor that real-time scheduling improves audio quality. That is not true. All it does is reduce the probability of skipping (audio buffer xruns) when the computer is under heavy load. Using MPD ********* Starting and Stopping MPD ------------------------- The simplest (but not the best) way to start :program:`MPD` is to simply type:: mpd This will start :program:`MPD` as a daemon process (which means it detaches from your terminal and continues to run in background). To stop it, send ``SIGTERM`` to the process; if you have configured a ``pid_file``, you can use the ``--kill`` option:: mpd --kill The best way to manage :program:`MPD` processes is to use a service manager such as :program:`systemd`. systemd ^^^^^^^ :program:`MPD` ships with :program:`systemd` service units. If you have installed :program:`MPD` with your operating system's package manager, these are probably preinstalled, so you can start and stop :program:`MPD` this way (like any other service):: systemctl start mpd systemctl stop mpd systemd socket activation ^^^^^^^^^^^^^^^^^^^^^^^^^ Using systemd, you can launch :program:`MPD` on demand when the first client attempts to connect. :program:`MPD` comes with two systemd unit files: a "service" unit and a "socket" unit. These will be installed to the directory specified with :code:`-Dsystemd_system_unit_dir=...`, e.g. :file:`/lib/systemd/system`. To enable socket activation, type: .. code-block:: none systemctl enable mpd.socket systemctl start mpd.socket In this configuration, :program:`MPD` will ignore the :ref:`listener settings ` (``bind_to_address`` and ``port``). systemd user unit ^^^^^^^^^^^^^^^^^ You can launch :program:`MPD` as a systemd user unit. These will be installed to the directory specified with :code:`-Dsystemd_user_unit_dir=...`, e.g. :file:`/usr/lib/systemd/user` or :file:`$HOME/.local/share/systemd/user`. Once the user unit is installed, you can start and stop :program:`MPD` like any other service: .. code-block:: none systemctl --user start mpd To auto-start :program:`MPD` upon login, type: .. code-block:: none systemctl --user enable mpd .. _signals: Signals ------- :program:`MPD` understands the following UNIX signals: - ``SIGTERM``, ``SIGINT``: shut down MPD - ``SIGHUP``: reopen log files (send this after log rotation) and flush caches (see :ref:`input_cache`) The client ---------- After you have installed, configured and started :program:`MPD`, you choose a client to control the playback. The most basic client is :program:`mpc`, which provides a command line interface. It is useful in shell scripts. Many people bind specific :program:`mpc` commands to hotkeys. The `MPD Wiki `_ contains an extensive list of clients to choose from. The music directory and the database ------------------------------------ The "music directory" is where you store your music files. :program:`MPD` stores all relevant meta information about all songs in its "database". Whenever you add, modify or remove songs in the music directory, you have to update the database, for example with mpc: .. code-block:: none mpc update Depending on the size of your music collection and the speed of the storage, this can take a while. To exclude a file from the update, create a file called :file:`.mpdignore` in its parent directory. Each line of that file may contain a list of shell wildcards. Matching files in the current directory and all subdirectories are excluded. Mounting other storages into the music directory ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ :program:`MPD` has various storage plugins of which multiple instances can be "mounted" into the music directory. This way, you can use local music, file servers and USB sticks at the same time. Example: .. code-block:: none mpc mount foo nfs://192.168.1.4/export/mp3 mpc mount usbstick udisks://by-uuid-2F2B-D136 mpc unmount usbstick :program:`MPD`'s neighbor plugins can be helpful with finding mountable storages: .. code-block:: none mpc listneighbors Mounting is only possible with the simple database plugin and a :code:`cache_directory`, e.g.: .. code-block:: none database { plugin "simple" path "~/.mpd/db" cache_directory "~/.mpd/cache" } This requires migrating from the old :code:`db_file` setting to a database section. The cache directory must exist, and :program:`MPD` will put one file per mount there, which will be reused when the same storage is used again later. Metadata -------- When scanning or playing a song, :program:`MPD` parses its metadata. See :ref:`tags` for a list of supported tags. The :ref:`metadata_to_use ` setting can be used to enable or disable certain tags. The queue --------- The queue (sometimes called "current playlist") is a list of songs to be played by :program:`MPD`. To play a song, add it to the queue and start playback. Most clients offer an interface to edit the queue. .. _stored_playlists: Stored Playlists ---------------- Stored playlists are some kind of secondary playlists which can be created, saved, edited and deleted by the client. They are addressed by their names. Its contents can be loaded into the queue, to be played back. The :code:`playlist_directory` setting specifies where those playlists are stored. Advanced usage ************** Bit-perfect playback -------------------- "Bit-perfect playback" is a phrase used by audiophiles to describe a setup that plays back digital music as-is, without applying any modifications such as resampling, format conversion or software volume. Naturally, this implies a lossless codec. By default, :program:`MPD` attempts to do bit-perfect playback, unless you tell it not to. Precondition is a sound chip that supports the audio format of your music files. If the audio format is not supported, :program:`MPD` attempts to fall back to the nearest supported audio format, trying to lose as little quality as possible. To verify if :program:`MPD` converts the audio format, enable verbose logging, and watch for these lines: .. code-block:: none decoder: audio_format=44100:24:2, seekable=true output: opened plugin=alsa name="An ALSA output" audio_format=44100:16:2 output: converting from 44100:24:2 This example shows that a 24 bit file is being played, but the sound chip cannot play 24 bit. It falls back to 16 bit, discarding 8 bit. However, this does not yet prove bit-perfect playback; ALSA may be fooling :program:`MPD` that the audio format is supported. To verify the format really being sent to the physical sound chip, try: .. code-block:: none cat /proc/asound/card*/pcm*p/sub*/hw_params access: RW_INTERLEAVED format: S16_LE subformat: STD channels: 2 rate: 44100 (44100/1) period_size: 4096 buffer_size: 16384 Obey the "format" row, which indicates that the current playback format is 16 bit (signed 16 bit integer, little endian). Check list for bit-perfect playback: * Use the ALSA output plugin. * Disable sound processing inside ALSA by configuring a "hardware" device (:samp:`hw:0,0` or similar). * Don't use software volume (setting :code:`mixer_type`). * Don't force :program:`MPD` to use a specific audio format (settings :code:`format`, :ref:`audio_output_format `). * Verify that you are really doing bit-perfect playback using :program:`MPD`'s verbose log and :file:`/proc/asound/card*/pcm*p/sub*/hw_params`. Some DACs can also indicate the audio format. .. _dsd: Direct Stream Digital (DSD) --------------------------- DSD (`Direct Stream Digital `_) is a digital format that stores audio as a sequence of single-bit values at a very high sampling rate. It is the sample format used on `Super Audio CDs `_. :program:`MPD` understands the file formats :ref:`DSDIFF ` and :ref:`DSF `. There are three ways to play back DSD: * Native DSD playback. Requires ALSA 1.0.27.1 or later, a sound driver/chip that supports DSD and of course a DAC that supports DSD. * DoP (DSD over PCM) playback. This wraps DSD inside fake 24 bit PCM according to the DoP standard. Requires a DAC that supports DSD. No support from ALSA and the sound chip required (except for bit-perfect 24 bit PCM support). * Convert DSD to PCM on-the-fly. Native DSD playback is used automatically if available. DoP is only used if enabled explicitly using the :code:`dop` option, because there is no way for :program:`MPD` to find out whether the DAC supports it. DSD to PCM conversion is the fallback if DSD cannot be used directly. ICY-MetaData ------------ Some MP3 streams send information about the current song with a protocol named `"ICY-MetaData" `_. :program:`MPD` makes its ``StreamTitle`` value available as ``Title`` tag. By default, :program:`MPD` assumes this tag is UTF-8-encoded. To tell :program:`MPD` to assume a different character set, specify it in the ``charset`` URL fragment parameter, e.g.:: mpc add 'http://radio.example.com/stream#charset=cp1251' Client Hacks ************ .. _external_mixer: External Mixer -------------- The setting :code:`mixer_type "null"` asks MPD to pretend that there is a mixer, but not actually do something. This allows you to implement a :program:`MPD` client which listens for mixer events, queries the current (fake) volume, and uses it to program an external mixer. For example, your client can forward this setting to your amplifier. Troubleshooting *************** Where to start -------------- Make sure you have the latest :program:`MPD` version (via :code:`mpd --version`, not mpc version). All the time, bugs are found and fixed, and your problem might be a bug that is fixed already. Do not ask for help unless you have the latest :program:`MPD` version. The most common excuse is when your distribution ships an old :program:`MPD` version - in that case, please ask your distribution for help, and not the :program:`MPD` project. Check the log file. Configure :code:`log_level "verbose"` or pass :option:`--verbose` to mpd. Sometimes, it is helpful to run :program:`MPD` in a terminal and follow what happens. This is how to do it: .. code-block:: none mpd --stderr --no-daemon --verbose Support ------- Getting Help ^^^^^^^^^^^^ The :program:`MPD` project runs a `forum `_ and an IRC channel (#mpd on Freenode) for requesting help. Visit the MPD help page for details on how to get help. Common Problems ^^^^^^^^^^^^^^^ Startup """"""" Error "could not get realtime scheduling" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ See :ref:`realtime`. You can safely ignore this, but you won't benefit from real-time scheduling. This only makes a difference if your computer runs programs other than MPD. Error "Failed to initialize io_uring" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Linux specific: the io_uring subsystem could not be initialized. This is not a critical error - MPD will fall back to "classic" blocking disk I/O. You can safely ignore this error, but you won't benefit from io_uring's advantages. * "Cannot allocate memory" usually means that your memlock limit (``ulimit -l`` in bash or ``LimitMEMLOCK`` in systemd) is too low. 64 MB is a reasonable value for this limit. * Your Linux kernel might be too old and does not support io_uring. Error "bind to '0.0.0.0:6600' failed (continuing anyway, because binding to '[::]:6600' succeeded)" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This happens on Linux when :file:`/proc/sys/net/ipv6/bindv6only` is disabled. MPD first binds to IPv6, and this automatically binds to IPv4 as well; after that, MPD binds to IPv4, but that fails. You can safely ignore this, because MPD works on both IPv4 and IPv6. Database """""""" I can't see my music in the MPD database ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ * Check your :code:`music_directory` setting. * Does the MPD user have read permission on all music files, and read+execute permission on all music directories (and all of their parent directories)? * Did you update the database? (mpc update) * Did you enable all relevant decoder plugins at compile time? :command:`mpd --version` will tell you. MPD doesn't read ID3 tags! ~~~~~~~~~~~~~~~~~~~~~~~~~~ * You probably compiled :program:`MPD` without libid3tag. :command:`mpd --version` will tell you. Playback """""""" I can't hear music on my client ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ * That problem usually follows a misunderstanding of the nature of :program:`MPD`. :program:`MPD` is a remote-controlled music player, not a music distribution system. Usually, the speakers are connected to the box where :program:`MPD` runs, and the :program:`MPD` client only sends control commands, but the client does not actually play your music. :program:`MPD` has output plugins which allow hearing music on a remote host (such as httpd), but that is not :program:`MPD`'s primary design goal. Error "Device or resource busy" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ * This ALSA error means that another program uses your sound hardware exclusively. You can stop that program to allow :program:`MPD` to use it. Sometimes, this other program is PulseAudio, which can multiplex sound from several applications, to allow them to share your sound chip. In this case, it might be a good idea for :program:`MPD` to use PulseAudio as well, instead of using ALSA directly. Reporting Bugs -------------- If you believe you found a bug in :program:`MPD`, report it on the `bug tracker `_. Your bug report should contain: * the output of :command:`mpd --version` * your configuration file (:file:`mpd.conf`) * relevant portions of the log file (:option:`--verbose`) * be clear about what you expect MPD to do, and what is actually happening .. _profiler: Too Much CPU Usage ^^^^^^^^^^^^^^^^^^ If you believe MPD consumes too much CPU, `write a bug report `_ with a profiling information. On Linux, this can be obtained with :program:`perf` (on Debian, installed the package :file:`linux-perf`), for example:: perf record -p `pidof mpd` Run this command while MPD consumes much CPU, let it run for a minute or so, and stop it by pressing ``Ctrl-C``. Then type:: perf report >mpd_perf.txt Upload the output file to the bug report. .. note:: This requires having debug symbols for MPD and all relevant libraries. See :ref:`crash` for details. .. _crash: MPD crashes ^^^^^^^^^^^ All :program:`MPD` crashes are bugs which must be fixed by a developer, and you should write a bug report. (Many crash bugs are caused by codec libraries used by :program:`MPD`, and then that library must be fixed; but in any case, the :program:`MPD` `bug tracker `_ is a good place to report it first if you don't know.) A crash bug report needs to contain a "backtrace". First of all, your :program:`MPD` executable must not be "stripped" (i.e. debug information deleted). The executables shipped with Linux distributions are usually stripped, but some have so-called "debug" packages (package :file:`mpd-dbgsym` or :file:`mpd-dbg` on Debian, :file:`mpd-debug` on other distributions). Make sure this package is installed. If you built :program:`MPD` from sources, please recompile with Meson option ":code:`--buildtype=debug -Db_ndebug=false`", because this will add more helpful information to the backtrace. You can extract the backtrace from a core dump, or by running :program:`MPD` in a debugger, e.g.: .. code-block:: none gdb --args mpd --stderr --no-daemon --verbose run As soon as you have reproduced the crash, type ":command:`bt`" on the gdb command prompt. Copy the output to your bug report.