1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
|
// SPDX-License-Identifier: GPL-2.0-only
/*
* Samsung SoC USB 1.1/2.0 PHY driver - S5PV210 support
*
* Copyright (C) 2013 Samsung Electronics Co., Ltd.
* Authors: Kamil Debski <k.debski@samsung.com>
*/
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/phy/phy.h>
#include "phy-samsung-usb2.h"
/* Exynos USB PHY registers */
/* PHY power control */
#define S5PV210_UPHYPWR 0x0
#define S5PV210_UPHYPWR_PHY0_SUSPEND BIT(0)
#define S5PV210_UPHYPWR_PHY0_PWR BIT(3)
#define S5PV210_UPHYPWR_PHY0_OTG_PWR BIT(4)
#define S5PV210_UPHYPWR_PHY0 ( \
S5PV210_UPHYPWR_PHY0_SUSPEND | \
S5PV210_UPHYPWR_PHY0_PWR | \
S5PV210_UPHYPWR_PHY0_OTG_PWR)
#define S5PV210_UPHYPWR_PHY1_SUSPEND BIT(6)
#define S5PV210_UPHYPWR_PHY1_PWR BIT(7)
#define S5PV210_UPHYPWR_PHY1 ( \
S5PV210_UPHYPWR_PHY1_SUSPEND | \
S5PV210_UPHYPWR_PHY1_PWR)
/* PHY clock control */
#define S5PV210_UPHYCLK 0x4
#define S5PV210_UPHYCLK_PHYFSEL_MASK (0x3 << 0)
#define S5PV210_UPHYCLK_PHYFSEL_48MHZ (0x0 << 0)
#define S5PV210_UPHYCLK_PHYFSEL_24MHZ (0x3 << 0)
#define S5PV210_UPHYCLK_PHYFSEL_12MHZ (0x2 << 0)
#define S5PV210_UPHYCLK_PHY0_ID_PULLUP BIT(2)
#define S5PV210_UPHYCLK_PHY0_COMMON_ON BIT(4)
#define S5PV210_UPHYCLK_PHY1_COMMON_ON BIT(7)
/* PHY reset control */
#define S5PV210_UPHYRST 0x8
#define S5PV210_URSTCON_PHY0 BIT(0)
#define S5PV210_URSTCON_OTG_HLINK BIT(1)
#define S5PV210_URSTCON_OTG_PHYLINK BIT(2)
#define S5PV210_URSTCON_PHY1_ALL BIT(3)
#define S5PV210_URSTCON_HOST_LINK_ALL BIT(4)
/* Isolation, configured in the power management unit */
#define S5PV210_USB_ISOL_OFFSET 0x680c
#define S5PV210_USB_ISOL_DEVICE BIT(0)
#define S5PV210_USB_ISOL_HOST BIT(1)
enum s5pv210_phy_id {
S5PV210_DEVICE,
S5PV210_HOST,
S5PV210_NUM_PHYS,
};
/*
* s5pv210_rate_to_clk() converts the supplied clock rate to the value that
* can be written to the phy register.
*/
static int s5pv210_rate_to_clk(unsigned long rate, u32 *reg)
{
switch (rate) {
case 12 * MHZ:
*reg = S5PV210_UPHYCLK_PHYFSEL_12MHZ;
break;
case 24 * MHZ:
*reg = S5PV210_UPHYCLK_PHYFSEL_24MHZ;
break;
case 48 * MHZ:
*reg = S5PV210_UPHYCLK_PHYFSEL_48MHZ;
break;
default:
return -EINVAL;
}
return 0;
}
static void s5pv210_isol(struct samsung_usb2_phy_instance *inst, bool on)
{
struct samsung_usb2_phy_driver *drv = inst->drv;
u32 mask;
switch (inst->cfg->id) {
case S5PV210_DEVICE:
mask = S5PV210_USB_ISOL_DEVICE;
break;
case S5PV210_HOST:
mask = S5PV210_USB_ISOL_HOST;
break;
default:
return;
}
regmap_update_bits(drv->reg_pmu, S5PV210_USB_ISOL_OFFSET,
mask, on ? 0 : mask);
}
static void s5pv210_phy_pwr(struct samsung_usb2_phy_instance *inst, bool on)
{
struct samsung_usb2_phy_driver *drv = inst->drv;
u32 rstbits = 0;
u32 phypwr = 0;
u32 rst;
u32 pwr;
switch (inst->cfg->id) {
case S5PV210_DEVICE:
phypwr = S5PV210_UPHYPWR_PHY0;
rstbits = S5PV210_URSTCON_PHY0;
break;
case S5PV210_HOST:
phypwr = S5PV210_UPHYPWR_PHY1;
rstbits = S5PV210_URSTCON_PHY1_ALL |
S5PV210_URSTCON_HOST_LINK_ALL;
break;
}
if (on) {
writel(drv->ref_reg_val, drv->reg_phy + S5PV210_UPHYCLK);
pwr = readl(drv->reg_phy + S5PV210_UPHYPWR);
pwr &= ~phypwr;
writel(pwr, drv->reg_phy + S5PV210_UPHYPWR);
rst = readl(drv->reg_phy + S5PV210_UPHYRST);
rst |= rstbits;
writel(rst, drv->reg_phy + S5PV210_UPHYRST);
udelay(10);
rst &= ~rstbits;
writel(rst, drv->reg_phy + S5PV210_UPHYRST);
/* The following delay is necessary for the reset sequence to be
* completed
*/
udelay(80);
} else {
pwr = readl(drv->reg_phy + S5PV210_UPHYPWR);
pwr |= phypwr;
writel(pwr, drv->reg_phy + S5PV210_UPHYPWR);
}
}
static int s5pv210_power_on(struct samsung_usb2_phy_instance *inst)
{
s5pv210_isol(inst, 0);
s5pv210_phy_pwr(inst, 1);
return 0;
}
static int s5pv210_power_off(struct samsung_usb2_phy_instance *inst)
{
s5pv210_phy_pwr(inst, 0);
s5pv210_isol(inst, 1);
return 0;
}
static const struct samsung_usb2_common_phy s5pv210_phys[S5PV210_NUM_PHYS] = {
[S5PV210_DEVICE] = {
.label = "device",
.id = S5PV210_DEVICE,
.power_on = s5pv210_power_on,
.power_off = s5pv210_power_off,
},
[S5PV210_HOST] = {
.label = "host",
.id = S5PV210_HOST,
.power_on = s5pv210_power_on,
.power_off = s5pv210_power_off,
},
};
const struct samsung_usb2_phy_config s5pv210_usb2_phy_config = {
.num_phys = ARRAY_SIZE(s5pv210_phys),
.phys = s5pv210_phys,
.rate_to_clk = s5pv210_rate_to_clk,
};
|
