// SPDX-License-Identifier: GPL-2.0-only // Copyright (c) 2018-2020, Intel Corporation // // sof-wm8804.c - ASoC machine driver for Up and Up2 board // based on WM8804/Hifiberry Digi+ #include #include #include #include #include #include #include #include #include #include #include #include "../../codecs/wm8804.h" struct sof_card_private { struct gpio_desc *gpio_44; struct gpio_desc *gpio_48; int sample_rate; }; #define SOF_WM8804_UP2_QUIRK BIT(0) static unsigned long sof_wm8804_quirk; static int sof_wm8804_quirk_cb(const struct dmi_system_id *id) { sof_wm8804_quirk = (unsigned long)id->driver_data; return 1; } static const struct dmi_system_id sof_wm8804_quirk_table[] = { { .callback = sof_wm8804_quirk_cb, .matches = { DMI_MATCH(DMI_SYS_VENDOR, "AAEON"), DMI_MATCH(DMI_PRODUCT_NAME, "UP-APL01"), }, .driver_data = (void *)SOF_WM8804_UP2_QUIRK, }, {} }; static int sof_wm8804_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); struct sof_card_private *ctx = snd_soc_card_get_drvdata(rtd->card); struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); struct snd_soc_component *codec = codec_dai->component; const int sysclk = 27000000; /* This is fixed on this board */ int samplerate; long mclk_freq; int mclk_div; int sampling_freq; bool clk_44; int ret; samplerate = params_rate(params); if (samplerate == ctx->sample_rate) return 0; ctx->sample_rate = 0; if (samplerate <= 96000) { mclk_freq = samplerate * 256; mclk_div = WM8804_MCLKDIV_256FS; } else { mclk_freq = samplerate * 128; mclk_div = WM8804_MCLKDIV_128FS; } switch (samplerate) { case 32000: sampling_freq = 0x03; break; case 44100: sampling_freq = 0x00; break; case 48000: sampling_freq = 0x02; break; case 88200: sampling_freq = 0x08; break; case 96000: sampling_freq = 0x0a; break; case 176400: sampling_freq = 0x0c; break; case 192000: sampling_freq = 0x0e; break; default: dev_err(rtd->card->dev, "unsupported samplerate %d\n", samplerate); return -EINVAL; } if (samplerate % 16000) clk_44 = true; /* use 44.1 kHz root frequency */ else clk_44 = false; if (!(IS_ERR_OR_NULL(ctx->gpio_44) || IS_ERR_OR_NULL(ctx->gpio_48))) { /* * ensure both GPIOs are LOW first, then drive the * relevant one to HIGH */ if (clk_44) { gpiod_set_value_cansleep(ctx->gpio_48, !clk_44); gpiod_set_value_cansleep(ctx->gpio_44, clk_44); } else { gpiod_set_value_cansleep(ctx->gpio_44, clk_44); gpiod_set_value_cansleep(ctx->gpio_48, !clk_44); } } snd_soc_dai_set_clkdiv(codec_dai, WM8804_MCLK_DIV, mclk_div); ret = snd_soc_dai_set_pll(codec_dai, 0, 0, sysclk, mclk_freq); if (ret < 0) { dev_err(rtd->card->dev, "Failed to set WM8804 PLL\n"); return ret; } ret = snd_soc_dai_set_sysclk(codec_dai, WM8804_TX_CLKSRC_PLL, sysclk, SND_SOC_CLOCK_OUT); if (ret < 0) { dev_err(rtd->card->dev, "Failed to set WM8804 SYSCLK: %d\n", ret); return ret; } /* set sampling frequency status bits */ snd_soc_component_update_bits(codec, WM8804_SPDTX4, 0x0f, sampling_freq); ctx->sample_rate = samplerate; return 0; } /* machine stream operations */ static struct snd_soc_ops sof_wm8804_ops = { .hw_params = sof_wm8804_hw_params, }; SND_SOC_DAILINK_DEF(ssp5_pin, DAILINK_COMP_ARRAY(COMP_CPU("SSP5 Pin"))); SND_SOC_DAILINK_DEF(ssp5_codec, DAILINK_COMP_ARRAY(COMP_CODEC("i2c-1AEC8804:00", "wm8804-spdif"))); SND_SOC_DAILINK_DEF(platform, DAILINK_COMP_ARRAY(COMP_PLATFORM("0000:00:0e.0"))); static struct snd_soc_dai_link dailink[] = { /* back ends */ { .name = "SSP5-Codec", .id = 0, .no_pcm = 1, .nonatomic = true, .dpcm_playback = 1, .dpcm_capture = 1, .ops = &sof_wm8804_ops, SND_SOC_DAILINK_REG(ssp5_pin, ssp5_codec, platform), }, }; /* SoC card */ static struct snd_soc_card sof_wm8804_card = { .name = "wm8804", /* sof- prefix added automatically */ .owner = THIS_MODULE, .dai_link = dailink, .num_links = ARRAY_SIZE(dailink), }; /* i2c-:00 with HID being 8 chars */ static char codec_name[SND_ACPI_I2C_ID_LEN]; /* * to control the HifiBerry Digi+ PRO, it's required to toggle GPIO to * select the clock source. On the Up2 board, this means * Pin29/BCM5/Linux GPIO 430 and Pin 31/BCM6/ Linux GPIO 404. * * Using the ACPI device name is not very nice, but since we only use * the value for the Up2 board there is no risk of conflict with other * platforms. */ static struct gpiod_lookup_table up2_gpios_table = { /* .dev_id is set during probe */ .table = { GPIO_LOOKUP("INT3452:01", 73, "BCM-GPIO5", GPIO_ACTIVE_HIGH), GPIO_LOOKUP("INT3452:01", 74, "BCM-GPIO6", GPIO_ACTIVE_HIGH), { }, }, }; static int sof_wm8804_probe(struct platform_device *pdev) { struct snd_soc_card *card; struct snd_soc_acpi_mach *mach; struct sof_card_private *ctx; struct acpi_device *adev; int dai_index = 0; int ret; int i; ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); if (!ctx) return -ENOMEM; mach = pdev->dev.platform_data; card = &sof_wm8804_card; card->dev = &pdev->dev; dmi_check_system(sof_wm8804_quirk_table); if (sof_wm8804_quirk & SOF_WM8804_UP2_QUIRK) { up2_gpios_table.dev_id = dev_name(&pdev->dev); gpiod_add_lookup_table(&up2_gpios_table); /* * The gpios are required for specific boards with * local oscillators, and optional in other cases. * Since we can't identify when they are needed, use * the GPIO as non-optional */ ctx->gpio_44 = devm_gpiod_get(&pdev->dev, "BCM-GPIO5", GPIOD_OUT_LOW); if (IS_ERR(ctx->gpio_44)) { ret = PTR_ERR(ctx->gpio_44); dev_err(&pdev->dev, "could not get BCM-GPIO5: %d\n", ret); return ret; } ctx->gpio_48 = devm_gpiod_get(&pdev->dev, "BCM-GPIO6", GPIOD_OUT_LOW); if (IS_ERR(ctx->gpio_48)) { ret = PTR_ERR(ctx->gpio_48); dev_err(&pdev->dev, "could not get BCM-GPIO6: %d\n", ret); return ret; } } /* fix index of codec dai */ for (i = 0; i < ARRAY_SIZE(dailink); i++) { if (!strcmp(dailink[i].codecs->name, "i2c-1AEC8804:00")) { dai_index = i; break; } } /* fixup codec name based on HID */ adev = acpi_dev_get_first_match_dev(mach->id, NULL, -1); if (adev) { snprintf(codec_name, sizeof(codec_name), "%s%s", "i2c-", acpi_dev_name(adev)); put_device(&adev->dev); dailink[dai_index].codecs->name = codec_name; } snd_soc_card_set_drvdata(card, ctx); return devm_snd_soc_register_card(&pdev->dev, card); } static int sof_wm8804_remove(struct platform_device *pdev) { if (sof_wm8804_quirk & SOF_WM8804_UP2_QUIRK) gpiod_remove_lookup_table(&up2_gpios_table); return 0; } static struct platform_driver sof_wm8804_driver = { .driver = { .name = "sof-wm8804", .pm = &snd_soc_pm_ops, }, .probe = sof_wm8804_probe, .remove = sof_wm8804_remove, }; module_platform_driver(sof_wm8804_driver); MODULE_DESCRIPTION("ASoC Intel(R) SOF + WM8804 Machine driver"); MODULE_AUTHOR("Pierre-Louis Bossart"); MODULE_LICENSE("GPL v2"); MODULE_ALIAS("platform:sof-wm8804");