/* * Copyright 2002-2005, Devicescape Software, Inc. * Copyright 2013-2014 Intel Mobile Communications GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #ifndef STA_INFO_H #define STA_INFO_H #include #include #include #include #include #include #include #include "key.h" /** * enum ieee80211_sta_info_flags - Stations flags * * These flags are used with &struct sta_info's @flags member, but * only indirectly with set_sta_flag() and friends. * * @WLAN_STA_AUTH: Station is authenticated. * @WLAN_STA_ASSOC: Station is associated. * @WLAN_STA_PS_STA: Station is in power-save mode * @WLAN_STA_AUTHORIZED: Station is authorized to send/receive traffic. * This bit is always checked so needs to be enabled for all stations * when virtual port control is not in use. * @WLAN_STA_SHORT_PREAMBLE: Station is capable of receiving short-preamble * frames. * @WLAN_STA_WDS: Station is one of our WDS peers. * @WLAN_STA_CLEAR_PS_FILT: Clear PS filter in hardware (using the * IEEE80211_TX_CTL_CLEAR_PS_FILT control flag) when the next * frame to this station is transmitted. * @WLAN_STA_MFP: Management frame protection is used with this STA. * @WLAN_STA_BLOCK_BA: Used to deny ADDBA requests (both TX and RX) * during suspend/resume and station removal. * @WLAN_STA_PS_DRIVER: driver requires keeping this station in * power-save mode logically to flush frames that might still * be in the queues * @WLAN_STA_PSPOLL: Station sent PS-poll while driver was keeping * station in power-save mode, reply when the driver unblocks. * @WLAN_STA_TDLS_PEER: Station is a TDLS peer. * @WLAN_STA_TDLS_PEER_AUTH: This TDLS peer is authorized to send direct * packets. This means the link is enabled. * @WLAN_STA_TDLS_INITIATOR: We are the initiator of the TDLS link with this * station. * @WLAN_STA_TDLS_CHAN_SWITCH: This TDLS peer supports TDLS channel-switching * @WLAN_STA_TDLS_OFF_CHANNEL: The local STA is currently off-channel with this * TDLS peer * @WLAN_STA_UAPSD: Station requested unscheduled SP while driver was * keeping station in power-save mode, reply when the driver * unblocks the station. * @WLAN_STA_SP: Station is in a service period, so don't try to * reply to other uAPSD trigger frames or PS-Poll. * @WLAN_STA_4ADDR_EVENT: 4-addr event was already sent for this frame. * @WLAN_STA_INSERTED: This station is inserted into the hash table. * @WLAN_STA_RATE_CONTROL: rate control was initialized for this station. * @WLAN_STA_TOFFSET_KNOWN: toffset calculated for this station is valid. * @WLAN_STA_MPSP_OWNER: local STA is owner of a mesh Peer Service Period. * @WLAN_STA_MPSP_RECIPIENT: local STA is recipient of a MPSP. * @WLAN_STA_PS_DELIVER: station woke up, but we're still blocking TX * until pending frames are delivered */ enum ieee80211_sta_info_flags { WLAN_STA_AUTH, WLAN_STA_ASSOC, WLAN_STA_PS_STA, WLAN_STA_AUTHORIZED, WLAN_STA_SHORT_PREAMBLE, WLAN_STA_WDS, WLAN_STA_CLEAR_PS_FILT, WLAN_STA_MFP, WLAN_STA_BLOCK_BA, WLAN_STA_PS_DRIVER, WLAN_STA_PSPOLL, WLAN_STA_TDLS_PEER, WLAN_STA_TDLS_PEER_AUTH, WLAN_STA_TDLS_INITIATOR, WLAN_STA_TDLS_CHAN_SWITCH, WLAN_STA_TDLS_OFF_CHANNEL, WLAN_STA_UAPSD, WLAN_STA_SP, WLAN_STA_4ADDR_EVENT, WLAN_STA_INSERTED, WLAN_STA_RATE_CONTROL, WLAN_STA_TOFFSET_KNOWN, WLAN_STA_MPSP_OWNER, WLAN_STA_MPSP_RECIPIENT, WLAN_STA_PS_DELIVER, }; #define ADDBA_RESP_INTERVAL HZ #define HT_AGG_MAX_RETRIES 15 #define HT_AGG_BURST_RETRIES 3 #define HT_AGG_RETRIES_PERIOD (15 * HZ) #define HT_AGG_STATE_DRV_READY 0 #define HT_AGG_STATE_RESPONSE_RECEIVED 1 #define HT_AGG_STATE_OPERATIONAL 2 #define HT_AGG_STATE_STOPPING 3 #define HT_AGG_STATE_WANT_START 4 #define HT_AGG_STATE_WANT_STOP 5 enum ieee80211_agg_stop_reason { AGG_STOP_DECLINED, AGG_STOP_LOCAL_REQUEST, AGG_STOP_PEER_REQUEST, AGG_STOP_DESTROY_STA, }; /** * struct tid_ampdu_tx - TID aggregation information (Tx). * * @rcu_head: rcu head for freeing structure * @session_timer: check if we keep Tx-ing on the TID (by timeout value) * @addba_resp_timer: timer for peer's response to addba request * @pending: pending frames queue -- use sta's spinlock to protect * @dialog_token: dialog token for aggregation session * @timeout: session timeout value to be filled in ADDBA requests * @state: session state (see above) * @last_tx: jiffies of last tx activity * @stop_initiator: initiator of a session stop * @tx_stop: TX DelBA frame when stopping * @buf_size: reorder buffer size at receiver * @failed_bar_ssn: ssn of the last failed BAR tx attempt * @bar_pending: BAR needs to be re-sent * * This structure's lifetime is managed by RCU, assignments to * the array holding it must hold the aggregation mutex. * * The TX path can access it under RCU lock-free if, and * only if, the state has the flag %HT_AGG_STATE_OPERATIONAL * set. Otherwise, the TX path must also acquire the spinlock * and re-check the state, see comments in the tx code * touching it. */ struct tid_ampdu_tx { struct rcu_head rcu_head; struct timer_list session_timer; struct timer_list addba_resp_timer; struct sk_buff_head pending; unsigned long state; unsigned long last_tx; u16 timeout; u8 dialog_token; u8 stop_initiator; bool tx_stop; u8 buf_size; u16 failed_bar_ssn; bool bar_pending; }; /** * struct tid_ampdu_rx - TID aggregation information (Rx). * * @reorder_buf: buffer to reorder incoming aggregated MPDUs. An MPDU may be an * A-MSDU with individually reported subframes. * @reorder_time: jiffies when skb was added * @session_timer: check if peer keeps Tx-ing on the TID (by timeout value) * @reorder_timer: releases expired frames from the reorder buffer. * @last_rx: jiffies of last rx activity * @head_seq_num: head sequence number in reordering buffer. * @stored_mpdu_num: number of MPDUs in reordering buffer * @ssn: Starting Sequence Number expected to be aggregated. * @buf_size: buffer size for incoming A-MPDUs * @timeout: reset timer value (in TUs). * @dialog_token: dialog token for aggregation session * @rcu_head: RCU head used for freeing this struct * @reorder_lock: serializes access to reorder buffer, see below. * @auto_seq: used for offloaded BA sessions to automatically pick head_seq_and * and ssn. * @removed: this session is removed (but might have been found due to RCU) * * This structure's lifetime is managed by RCU, assignments to * the array holding it must hold the aggregation mutex. * * The @reorder_lock is used to protect the members of this * struct, except for @timeout, @buf_size and @dialog_token, * which are constant across the lifetime of the struct (the * dialog token being used only for debugging). */ struct tid_ampdu_rx { struct rcu_head rcu_head; spinlock_t reorder_lock; struct sk_buff_head *reorder_buf; unsigned long *reorder_time; struct timer_list session_timer; struct timer_list reorder_timer; unsigned long last_rx; u16 head_seq_num; u16 stored_mpdu_num; u16 ssn; u16 buf_size; u16 timeout; u8 dialog_token; bool auto_seq; bool removed; }; /** * struct sta_ampdu_mlme - STA aggregation information. * * @tid_rx: aggregation info for Rx per TID -- RCU protected * @tid_tx: aggregation info for Tx per TID * @tid_start_tx: sessions where start was requested * @addba_req_num: number of times addBA request has been sent. * @last_addba_req_time: timestamp of the last addBA request. * @dialog_token_allocator: dialog token enumerator for each new session; * @work: work struct for starting/stopping aggregation * @tid_rx_timer_expired: bitmap indicating on which TIDs the * RX timer expired until the work for it runs * @tid_rx_stop_requested: bitmap indicating which BA sessions per TID the * driver requested to close until the work for it runs * @mtx: mutex to protect all TX data (except non-NULL assignments * to tid_tx[idx], which are protected by the sta spinlock) * tid_start_tx is also protected by sta->lock. */ struct sta_ampdu_mlme { struct mutex mtx; /* rx */ struct tid_ampdu_rx __rcu *tid_rx[IEEE80211_NUM_TIDS]; unsigned long tid_rx_timer_expired[BITS_TO_LONGS(IEEE80211_NUM_TIDS)]; unsigned long tid_rx_stop_requested[BITS_TO_LONGS(IEEE80211_NUM_TIDS)]; /* tx */ struct work_struct work; struct tid_ampdu_tx __rcu *tid_tx[IEEE80211_NUM_TIDS]; struct tid_ampdu_tx *tid_start_tx[IEEE80211_NUM_TIDS]; unsigned long last_addba_req_time[IEEE80211_NUM_TIDS]; u8 addba_req_num[IEEE80211_NUM_TIDS]; u8 dialog_token_allocator; }; /* Value to indicate no TID reservation */ #define IEEE80211_TID_UNRESERVED 0xff #define IEEE80211_FAST_XMIT_MAX_IV 18 /** * struct ieee80211_fast_tx - TX fastpath information * @key: key to use for hw crypto * @hdr: the 802.11 header to put with the frame * @hdr_len: actual 802.11 header length * @sa_offs: offset of the SA * @da_offs: offset of the DA * @pn_offs: offset where to put PN for crypto (or 0 if not needed) * @band: band this will be transmitted on, for tx_info * @rcu_head: RCU head to free this struct * * This struct is small enough so that the common case (maximum crypto * header length of 8 like for CCMP/GCMP) fits into a single 64-byte * cache line. */ struct ieee80211_fast_tx { struct ieee80211_key *key; u8 hdr_len; u8 sa_offs, da_offs, pn_offs; u8 band; u8 hdr[30 + 2 + IEEE80211_FAST_XMIT_MAX_IV + sizeof(rfc1042_header)]; struct rcu_head rcu_head; }; /** * struct sta_info - STA information * * This structure collects information about a station that * mac80211 is communicating with. * * @list: global linked list entry * @free_list: list entry for keeping track of stations to free * @hash_node: hash node for rhashtable * @addr: station's MAC address - duplicated from public part to * let the hash table work with just a single cacheline * @local: pointer to the global information * @sdata: virtual interface this station belongs to * @ptk: peer keys negotiated with this station, if any * @ptk_idx: last installed peer key index * @gtk: group keys negotiated with this station, if any * @rate_ctrl: rate control algorithm reference * @rate_ctrl_lock: spinlock used to protect rate control data * (data inside the algorithm, so serializes calls there) * @rate_ctrl_priv: rate control private per-STA pointer * @last_tx_rate: rate used for last transmit, to report to userspace as * "the" transmit rate * @last_rx_rate_idx: rx status rate index of the last data packet * @last_rx_rate_flag: rx status flag of the last data packet * @last_rx_rate_vht_flag: rx status vht flag of the last data packet * @last_rx_rate_vht_nss: rx status nss of last data packet * @lock: used for locking all fields that require locking, see comments * in the header file. * @drv_deliver_wk: used for delivering frames after driver PS unblocking * @listen_interval: listen interval of this station, when we're acting as AP * @_flags: STA flags, see &enum ieee80211_sta_info_flags, do not use directly * @ps_lock: used for powersave (when mac80211 is the AP) related locking * @ps_tx_buf: buffers (per AC) of frames to transmit to this station * when it leaves power saving state or polls * @tx_filtered: buffers (per AC) of frames we already tried to * transmit but were filtered by hardware due to STA having * entered power saving state, these are also delivered to * the station when it leaves powersave or polls for frames * @driver_buffered_tids: bitmap of TIDs the driver has data buffered on * @txq_buffered_tids: bitmap of TIDs that mac80211 has txq data buffered on * @rx_packets: Number of MSDUs received from this STA * @rx_bytes: Number of bytes received from this STA * @last_rx: time (in jiffies) when last frame was received from this STA * @last_connected: time (in seconds) when a station got connected * @num_duplicates: number of duplicate frames received from this STA * @rx_fragments: number of received MPDUs * @rx_dropped: number of dropped MPDUs from this STA * @last_signal: signal of last received frame from this STA * @avg_signal: moving average of signal of received frames from this STA * @last_ack_signal: signal of last received Ack frame from this STA * @last_seq_ctrl: last received seq/frag number from this STA (per TID * plus one for non-QoS frames) * @tx_filtered_count: number of frames the hardware filtered for this STA * @tx_retry_failed: number of frames that failed retry * @tx_retry_count: total number of retries for frames to this STA * @fail_avg: moving percentage of failed MSDUs * @tx_packets: number of RX/TX MSDUs * @tx_bytes: number of bytes transmitted to this STA * @tid_seq: per-TID sequence numbers for sending to this STA * @ampdu_mlme: A-MPDU state machine state * @timer_to_tid: identity mapping to ID timers * @plink_lock: serialize access to plink fields * @llid: Local link ID * @plid: Peer link ID * @reason: Cancel reason on PLINK_HOLDING state * @plink_retries: Retries in establishment * @plink_state: peer link state * @plink_timeout: timeout of peer link * @plink_timer: peer link watch timer * @t_offset: timing offset relative to this host * @t_offset_setpoint: reference timing offset of this sta to be used when * calculating clockdrift * @local_pm: local link-specific power save mode * @peer_pm: peer-specific power save mode towards local STA * @nonpeer_pm: STA power save mode towards non-peer neighbors * @debugfs: debug filesystem info * @dead: set to true when sta is unlinked * @uploaded: set to true when sta is uploaded to the driver * @lost_packets: number of consecutive lost packets * @sta: station information we share with the driver * @sta_state: duplicates information about station state (for debug) * @beacon_loss_count: number of times beacon loss has triggered * @rcu_head: RCU head used for freeing this station struct * @cur_max_bandwidth: maximum bandwidth to use for TX to the station, * taken from HT/VHT capabilities or VHT operating mode notification * @chains: chains ever used for RX from this station * @chain_signal_last: last signal (per chain) * @chain_signal_avg: signal average (per chain) * @known_smps_mode: the smps_mode the client thinks we are in. Relevant for * AP only. * @cipher_scheme: optional cipher scheme for this station * @last_tdls_pkt_time: holds the time in jiffies of last TDLS pkt ACKed * @reserved_tid: reserved TID (if any, otherwise IEEE80211_TID_UNRESERVED) * @tx_msdu: MSDUs transmitted to this station, using IEEE80211_NUM_TID * entry for non-QoS frames * @tx_msdu_retries: MSDU retries for transmissions to to this station, * using IEEE80211_NUM_TID entry for non-QoS frames * @tx_msdu_failed: MSDU failures for transmissions to to this station, * using IEEE80211_NUM_TID entry for non-QoS frames * @rx_msdu: MSDUs received from this station, using IEEE80211_NUM_TID * entry for non-QoS frames * @fast_tx: TX fastpath information * @processed_beacon: set to true after peer rates and capabilities are * processed */ struct sta_info { /* General information, mostly static */ struct list_head list, free_list; struct rcu_head rcu_head; struct rhash_head hash_node; u8 addr[ETH_ALEN]; struct ieee80211_local *local; struct ieee80211_sub_if_data *sdata; struct ieee80211_key __rcu *gtk[NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS]; struct ieee80211_key __rcu *ptk[NUM_DEFAULT_KEYS]; u8 ptk_idx; struct rate_control_ref *rate_ctrl; void *rate_ctrl_priv; spinlock_t rate_ctrl_lock; spinlock_t lock; struct ieee80211_fast_tx __rcu *fast_tx; struct work_struct drv_deliver_wk; u16 listen_interval; bool dead; bool uploaded; enum ieee80211_sta_state sta_state; /* use the accessors defined below */ unsigned long _flags; /* STA powersave lock and frame queues */ spinlock_t ps_lock; struct sk_buff_head ps_tx_buf[IEEE80211_NUM_ACS]; struct sk_buff_head tx_filtered[IEEE80211_NUM_ACS]; unsigned long driver_buffered_tids; unsigned long txq_buffered_tids; /* Updated from RX path only, no locking requirements */ unsigned long rx_packets; u64 rx_bytes; unsigned long last_rx; long last_connected; unsigned long num_duplicates; unsigned long rx_fragments; unsigned long rx_dropped; int last_signal; struct ewma avg_signal; int last_ack_signal; u8 chains; s8 chain_signal_last[IEEE80211_MAX_CHAINS]; struct ewma chain_signal_avg[IEEE80211_MAX_CHAINS]; /* Plus 1 for non-QoS frames */ __le16 last_seq_ctrl[IEEE80211_NUM_TIDS + 1]; /* Updated from TX status path only, no locking requirements */ unsigned long tx_filtered_count; unsigned long tx_retry_failed, tx_retry_count; /* moving percentage of failed MSDUs */ unsigned int fail_avg; /* Updated from TX path only, no locking requirements */ u64 tx_packets[IEEE80211_NUM_ACS]; u64 tx_bytes[IEEE80211_NUM_ACS]; struct ieee80211_tx_rate last_tx_rate; int last_rx_rate_idx; u32 last_rx_rate_flag; u32 last_rx_rate_vht_flag; u8 last_rx_rate_vht_nss; u16 tid_seq[IEEE80211_QOS_CTL_TID_MASK + 1]; u64 tx_msdu[IEEE80211_NUM_TIDS + 1]; u64 tx_msdu_retries[IEEE80211_NUM_TIDS + 1]; u64 tx_msdu_failed[IEEE80211_NUM_TIDS + 1]; u64 rx_msdu[IEEE80211_NUM_TIDS + 1]; /* * Aggregation information, locked with lock. */ struct sta_ampdu_mlme ampdu_mlme; u8 timer_to_tid[IEEE80211_NUM_TIDS]; #ifdef CONFIG_MAC80211_MESH /* * Mesh peer link attributes, protected by plink_lock. * TODO: move to a sub-structure that is referenced with pointer? */ spinlock_t plink_lock; u16 llid; u16 plid; u16 reason; u8 plink_retries; enum nl80211_plink_state plink_state; u32 plink_timeout; struct timer_list plink_timer; s64 t_offset; s64 t_offset_setpoint; /* mesh power save */ enum nl80211_mesh_power_mode local_pm; enum nl80211_mesh_power_mode peer_pm; enum nl80211_mesh_power_mode nonpeer_pm; bool processed_beacon; #endif #ifdef CONFIG_MAC80211_DEBUGFS struct sta_info_debugfsdentries { struct dentry *dir; bool add_has_run; } debugfs; #endif enum ieee80211_sta_rx_bandwidth cur_max_bandwidth; unsigned int lost_packets; unsigned int beacon_loss_count; enum ieee80211_smps_mode known_smps_mode; const struct ieee80211_cipher_scheme *cipher_scheme; /* TDLS timeout data */ unsigned long last_tdls_pkt_time; u8 reserved_tid; /* keep last! */ struct ieee80211_sta sta; }; static inline enum nl80211_plink_state sta_plink_state(struct sta_info *sta) { #ifdef CONFIG_MAC80211_MESH return sta->plink_state; #endif return NL80211_PLINK_LISTEN; } static inline void set_sta_flag(struct sta_info *sta, enum ieee80211_sta_info_flags flag) { WARN_ON(flag == WLAN_STA_AUTH || flag == WLAN_STA_ASSOC || flag == WLAN_STA_AUTHORIZED); set_bit(flag, &sta->_flags); } static inline void clear_sta_flag(struct sta_info *sta, enum ieee80211_sta_info_flags flag) { WARN_ON(flag == WLAN_STA_AUTH || flag == WLAN_STA_ASSOC || flag == WLAN_STA_AUTHORIZED); clear_bit(flag, &sta->_flags); } static inline int test_sta_flag(struct sta_info *sta, enum ieee80211_sta_info_flags flag) { return test_bit(flag, &sta->_flags); } static inline int test_and_clear_sta_flag(struct sta_info *sta, enum ieee80211_sta_info_flags flag) { WARN_ON(flag == WLAN_STA_AUTH || flag == WLAN_STA_ASSOC || flag == WLAN_STA_AUTHORIZED); return test_and_clear_bit(flag, &sta->_flags); } static inline int test_and_set_sta_flag(struct sta_info *sta, enum ieee80211_sta_info_flags flag) { WARN_ON(flag == WLAN_STA_AUTH || flag == WLAN_STA_ASSOC || flag == WLAN_STA_AUTHORIZED); return test_and_set_bit(flag, &sta->_flags); } int sta_info_move_state(struct sta_info *sta, enum ieee80211_sta_state new_state); static inline void sta_info_pre_move_state(struct sta_info *sta, enum ieee80211_sta_state new_state) { int ret; WARN_ON_ONCE(test_sta_flag(sta, WLAN_STA_INSERTED)); ret = sta_info_move_state(sta, new_state); WARN_ON_ONCE(ret); } void ieee80211_assign_tid_tx(struct sta_info *sta, int tid, struct tid_ampdu_tx *tid_tx); static inline struct tid_ampdu_tx * rcu_dereference_protected_tid_tx(struct sta_info *sta, int tid) { return rcu_dereference_protected(sta->ampdu_mlme.tid_tx[tid], lockdep_is_held(&sta->lock) || lockdep_is_held(&sta->ampdu_mlme.mtx)); } /* Maximum number of frames to buffer per power saving station per AC */ #define STA_MAX_TX_BUFFER 64 /* Minimum buffered frame expiry time. If STA uses listen interval that is * smaller than this value, the minimum value here is used instead. */ #define STA_TX_BUFFER_EXPIRE (10 * HZ) /* How often station data is cleaned up (e.g., expiration of buffered frames) */ #define STA_INFO_CLEANUP_INTERVAL (10 * HZ) /* * Get a STA info, must be under RCU read lock. */ struct sta_info *sta_info_get(struct ieee80211_sub_if_data *sdata, const u8 *addr); struct sta_info *sta_info_get_bss(struct ieee80211_sub_if_data *sdata, const u8 *addr); u32 sta_addr_hash(const void *key, u32 length, u32 seed); #define _sta_bucket_idx(_tbl, _a) \ rht_bucket_index(_tbl, sta_addr_hash(_a, ETH_ALEN, (_tbl)->hash_rnd)) #define for_each_sta_info(local, tbl, _addr, _sta, _tmp) \ rht_for_each_entry_rcu(_sta, _tmp, tbl, \ _sta_bucket_idx(tbl, _addr), \ hash_node) \ /* compare address and run code only if it matches */ \ if (ether_addr_equal(_sta->addr, (_addr))) /* * Get STA info by index, BROKEN! */ struct sta_info *sta_info_get_by_idx(struct ieee80211_sub_if_data *sdata, int idx); /* * Create a new STA info, caller owns returned structure * until sta_info_insert(). */ struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata, const u8 *addr, gfp_t gfp); void sta_info_free(struct ieee80211_local *local, struct sta_info *sta); /* * Insert STA info into hash table/list, returns zero or a * -EEXIST if (if the same MAC address is already present). * * Calling the non-rcu version makes the caller relinquish, * the _rcu version calls read_lock_rcu() and must be called * without it held. */ int sta_info_insert(struct sta_info *sta); int sta_info_insert_rcu(struct sta_info *sta) __acquires(RCU); int __must_check __sta_info_destroy(struct sta_info *sta); int sta_info_destroy_addr(struct ieee80211_sub_if_data *sdata, const u8 *addr); int sta_info_destroy_addr_bss(struct ieee80211_sub_if_data *sdata, const u8 *addr); void sta_info_recalc_tim(struct sta_info *sta); int sta_info_init(struct ieee80211_local *local); void sta_info_stop(struct ieee80211_local *local); /** * sta_info_flush - flush matching STA entries from the STA table * * Returns the number of removed STA entries. * * @sdata: sdata to remove all stations from * @vlans: if the given interface is an AP interface, also flush VLANs */ int __sta_info_flush(struct ieee80211_sub_if_data *sdata, bool vlans); static inline int sta_info_flush(struct ieee80211_sub_if_data *sdata) { return __sta_info_flush(sdata, false); } void sta_set_rate_info_tx(struct sta_info *sta, const struct ieee80211_tx_rate *rate, struct rate_info *rinfo); void sta_set_rate_info_rx(struct sta_info *sta, struct rate_info *rinfo); void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo); void ieee80211_sta_expire(struct ieee80211_sub_if_data *sdata, unsigned long exp_time); u8 sta_info_tx_streams(struct sta_info *sta); void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta); void ieee80211_sta_ps_deliver_poll_response(struct sta_info *sta); void ieee80211_sta_ps_deliver_uapsd(struct sta_info *sta); #endif /* STA_INFO_H */