/* * Copyright © 2006 Keith Packard * Copyright © 2007-2008 Dave Airlie * Copyright © 2007-2008 Intel Corporation * Jesse Barnes * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ #ifndef __DRM_CRTC_H__ #define __DRM_CRTC_H__ #include #include #include #include #include #include #include #include #include #include struct drm_device; struct drm_mode_set; struct drm_framebuffer; struct drm_object_properties; struct drm_file; struct drm_clip_rect; struct device_node; struct fence; #define DRM_MODE_OBJECT_CRTC 0xcccccccc #define DRM_MODE_OBJECT_CONNECTOR 0xc0c0c0c0 #define DRM_MODE_OBJECT_ENCODER 0xe0e0e0e0 #define DRM_MODE_OBJECT_MODE 0xdededede #define DRM_MODE_OBJECT_PROPERTY 0xb0b0b0b0 #define DRM_MODE_OBJECT_FB 0xfbfbfbfb #define DRM_MODE_OBJECT_BLOB 0xbbbbbbbb #define DRM_MODE_OBJECT_PLANE 0xeeeeeeee #define DRM_MODE_OBJECT_ANY 0 struct drm_mode_object { uint32_t id; uint32_t type; struct drm_object_properties *properties; }; #define DRM_OBJECT_MAX_PROPERTY 24 struct drm_object_properties { int count, atomic_count; /* NOTE: if we ever start dynamically destroying properties (ie. * not at drm_mode_config_cleanup() time), then we'd have to do * a better job of detaching property from mode objects to avoid * dangling property pointers: */ struct drm_property *properties[DRM_OBJECT_MAX_PROPERTY]; /* do not read/write values directly, but use drm_object_property_get_value() * and drm_object_property_set_value(): */ uint64_t values[DRM_OBJECT_MAX_PROPERTY]; }; static inline int64_t U642I64(uint64_t val) { return (int64_t)*((int64_t *)&val); } static inline uint64_t I642U64(int64_t val) { return (uint64_t)*((uint64_t *)&val); } /* * Rotation property bits. DRM_ROTATE_ rotates the image by the * specified amount in degrees in counter clockwise direction. DRM_REFLECT_X and * DRM_REFLECT_Y reflects the image along the specified axis prior to rotation */ #define DRM_ROTATE_MASK 0x0f #define DRM_ROTATE_0 0 #define DRM_ROTATE_90 1 #define DRM_ROTATE_180 2 #define DRM_ROTATE_270 3 #define DRM_REFLECT_MASK (~DRM_ROTATE_MASK) #define DRM_REFLECT_X 4 #define DRM_REFLECT_Y 5 enum drm_connector_force { DRM_FORCE_UNSPECIFIED, DRM_FORCE_OFF, DRM_FORCE_ON, /* force on analog part normally */ DRM_FORCE_ON_DIGITAL, /* for DVI-I use digital connector */ }; #include enum drm_connector_status { connector_status_connected = 1, connector_status_disconnected = 2, connector_status_unknown = 3, }; enum subpixel_order { SubPixelUnknown = 0, SubPixelHorizontalRGB, SubPixelHorizontalBGR, SubPixelVerticalRGB, SubPixelVerticalBGR, SubPixelNone, }; #define DRM_COLOR_FORMAT_RGB444 (1<<0) #define DRM_COLOR_FORMAT_YCRCB444 (1<<1) #define DRM_COLOR_FORMAT_YCRCB422 (1<<2) /* * Describes a given display (e.g. CRT or flat panel) and its limitations. */ struct drm_display_info { char name[DRM_DISPLAY_INFO_LEN]; /* Physical size */ unsigned int width_mm; unsigned int height_mm; /* Clock limits FIXME: storage format */ unsigned int min_vfreq, max_vfreq; unsigned int min_hfreq, max_hfreq; unsigned int pixel_clock; unsigned int bpc; enum subpixel_order subpixel_order; u32 color_formats; const u32 *bus_formats; unsigned int num_bus_formats; /* Mask of supported hdmi deep color modes */ u8 edid_hdmi_dc_modes; u8 cea_rev; }; /* data corresponds to displayid vend/prod/serial */ struct drm_tile_group { struct kref refcount; struct drm_device *dev; int id; u8 group_data[8]; }; /** * struct drm_framebuffer_funcs - framebuffer hooks */ struct drm_framebuffer_funcs { /** * @destroy: * * Clean up framebuffer resources, specifically also unreference the * backing storage. The core guarantees to call this function for every * framebuffer successfully created by ->fb_create() in * &drm_mode_config_funcs. Drivers must also call * drm_framebuffer_cleanup() to release DRM core resources for this * framebuffer. */ void (*destroy)(struct drm_framebuffer *framebuffer); /** * @create_handle: * * Create a buffer handle in the driver-specific buffer manager (either * GEM or TTM) valid for the passed-in struct &drm_file. This is used by * the core to implement the GETFB IOCTL, which returns (for * sufficiently priviledged user) also a native buffer handle. This can * be used for seamless transitions between modesetting clients by * copying the current screen contents to a private buffer and blending * between that and the new contents. * * GEM based drivers should call drm_gem_handle_create() to create the * handle. * * RETURNS: * * 0 on success or a negative error code on failure. */ int (*create_handle)(struct drm_framebuffer *fb, struct drm_file *file_priv, unsigned int *handle); /** * @dirty: * * Optional callback for the dirty fb IOCTL. * * Userspace can notify the driver via this callback that an area of the * framebuffer has changed and should be flushed to the display * hardware. This can also be used internally, e.g. by the fbdev * emulation, though that's not the case currently. * * See documentation in drm_mode.h for the struct drm_mode_fb_dirty_cmd * for more information as all the semantics and arguments have a one to * one mapping on this function. * * RETURNS: * * 0 on success or a negative error code on failure. */ int (*dirty)(struct drm_framebuffer *framebuffer, struct drm_file *file_priv, unsigned flags, unsigned color, struct drm_clip_rect *clips, unsigned num_clips); }; struct drm_framebuffer { struct drm_device *dev; /* * Note that the fb is refcounted for the benefit of driver internals, * for example some hw, disabling a CRTC/plane is asynchronous, and * scanout does not actually complete until the next vblank. So some * cleanup (like releasing the reference(s) on the backing GEM bo(s)) * should be deferred. In cases like this, the driver would like to * hold a ref to the fb even though it has already been removed from * userspace perspective. */ struct kref refcount; /* * Place on the dev->mode_config.fb_list, access protected by * dev->mode_config.fb_lock. */ struct list_head head; struct drm_mode_object base; const struct drm_framebuffer_funcs *funcs; unsigned int pitches[4]; unsigned int offsets[4]; uint64_t modifier[4]; unsigned int width; unsigned int height; /* depth can be 15 or 16 */ unsigned int depth; int bits_per_pixel; int flags; uint32_t pixel_format; /* fourcc format */ struct list_head filp_head; }; struct drm_property_blob { struct drm_mode_object base; struct drm_device *dev; struct kref refcount; struct list_head head_global; struct list_head head_file; size_t length; unsigned char data[]; }; struct drm_property_enum { uint64_t value; struct list_head head; char name[DRM_PROP_NAME_LEN]; }; struct drm_property { struct list_head head; struct drm_mode_object base; uint32_t flags; char name[DRM_PROP_NAME_LEN]; uint32_t num_values; uint64_t *values; struct drm_device *dev; struct list_head enum_list; }; struct drm_crtc; struct drm_connector; struct drm_encoder; struct drm_pending_vblank_event; struct drm_plane; struct drm_bridge; struct drm_atomic_state; struct drm_crtc_helper_funcs; struct drm_encoder_helper_funcs; struct drm_connector_helper_funcs; struct drm_plane_helper_funcs; /** * struct drm_crtc_state - mutable CRTC state * @crtc: backpointer to the CRTC * @enable: whether the CRTC should be enabled, gates all other state * @active: whether the CRTC is actively displaying (used for DPMS) * @planes_changed: planes on this crtc are updated * @mode_changed: crtc_state->mode or crtc_state->enable has been changed * @active_changed: crtc_state->active has been toggled. * @connectors_changed: connectors to this crtc have been updated * @plane_mask: bitmask of (1 << drm_plane_index(plane)) of attached planes * @last_vblank_count: for helpers and drivers to capture the vblank of the * update to ensure framebuffer cleanup isn't done too early * @adjusted_mode: for use by helpers and drivers to compute adjusted mode timings * @mode: current mode timings * @event: optional pointer to a DRM event to signal upon completion of the * state update * @state: backpointer to global drm_atomic_state * * Note that the distinction between @enable and @active is rather subtile: * Flipping @active while @enable is set without changing anything else may * never return in a failure from the ->atomic_check callback. Userspace assumes * that a DPMS On will always succeed. In other words: @enable controls resource * assignment, @active controls the actual hardware state. */ struct drm_crtc_state { struct drm_crtc *crtc; bool enable; bool active; /* computed state bits used by helpers and drivers */ bool planes_changed : 1; bool mode_changed : 1; bool active_changed : 1; bool connectors_changed : 1; /* attached planes bitmask: * WARNING: transitional helpers do not maintain plane_mask so * drivers not converted over to atomic helpers should not rely * on plane_mask being accurate! */ u32 plane_mask; /* last_vblank_count: for vblank waits before cleanup */ u32 last_vblank_count; /* adjusted_mode: for use by helpers and drivers */ struct drm_display_mode adjusted_mode; struct drm_display_mode mode; /* blob property to expose current mode to atomic userspace */ struct drm_property_blob *mode_blob; struct drm_pending_vblank_event *event; struct drm_atomic_state *state; }; /** * struct drm_crtc_funcs - control CRTCs for a given device * * The drm_crtc_funcs structure is the central CRTC management structure * in the DRM. Each CRTC controls one or more connectors (note that the name * CRTC is simply historical, a CRTC may control LVDS, VGA, DVI, TV out, etc. * connectors, not just CRTs). * * Each driver is responsible for filling out this structure at startup time, * in addition to providing other modesetting features, like i2c and DDC * bus accessors. */ struct drm_crtc_funcs { /** * @reset: * * Reset CRTC hardware and software state to off. This function isn't * called by the core directly, only through drm_mode_config_reset(). * It's not a helper hook only for historical reasons. * * Atomic drivers can use drm_atomic_helper_crtc_reset() to reset * atomic state using this hook. */ void (*reset)(struct drm_crtc *crtc); /** * @cursor_set: * * Update the cursor image. The cursor position is relative to the CRTC * and can be partially or fully outside of the visible area. * * Note that contrary to all other KMS functions the legacy cursor entry * points don't take a framebuffer object, but instead take directly a * raw buffer object id from the driver's buffer manager (which is * either GEM or TTM for current drivers). * * This entry point is deprecated, drivers should instead implement * universal plane support and register a proper cursor plane using * drm_crtc_init_with_planes(). * * This callback is optional * * RETURNS: * * 0 on success or a negative error code on failure. */ int (*cursor_set)(struct drm_crtc *crtc, struct drm_file *file_priv, uint32_t handle, uint32_t width, uint32_t height); /** * @cursor_set2: * * Update the cursor image, including hotspot information. The hotspot * must not affect the cursor position in CRTC coordinates, but is only * meant as a hint for virtualized display hardware to coordinate the * guests and hosts cursor position. The cursor hotspot is relative to * the cursor image. Otherwise this works exactly like @cursor_set. * * This entry point is deprecated, drivers should instead implement * universal plane support and register a proper cursor plane using * drm_crtc_init_with_planes(). * * This callback is optional. * * RETURNS: * * 0 on success or a negative error code on failure. */ int (*cursor_set2)(struct drm_crtc *crtc, struct drm_file *file_priv, uint32_t handle, uint32_t width, uint32_t height, int32_t hot_x, int32_t hot_y); /** * @cursor_move: * * Update the cursor position. The cursor does not need to be visible * when this hook is called. * * This entry point is deprecated, drivers should instead implement * universal plane support and register a proper cursor plane using * drm_crtc_init_with_planes(). * * This callback is optional. * * RETURNS: * * 0 on success or a negative error code on failure. */ int (*cursor_move)(struct drm_crtc *crtc, int x, int y); /** * @gamma_set: * * Set gamma on the CRTC. * * This callback is optional. * * NOTE: * * Drivers that support gamma tables and also fbdev emulation through * the provided helper library need to take care to fill out the gamma * hooks for both. Currently there's a bit an unfortunate duplication * going on, which should eventually be unified to just one set of * hooks. */ void (*gamma_set)(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b, uint32_t start, uint32_t size); /** * @destroy: * * Clean up plane resources. This is only called at driver unload time * through drm_mode_config_cleanup() since a CRTC cannot be hotplugged * in DRM. */ void (*destroy)(struct drm_crtc *crtc); /** * @set_config: * * This is the main legacy entry point to change the modeset state on a * CRTC. All the details of the desired configuration are passed in a * struct &drm_mode_set - see there for details. * * Drivers implementing atomic modeset should use * drm_atomic_helper_set_config() to implement this hook. * * RETURNS: * * 0 on success or a negative error code on failure. */ int (*set_config)(struct drm_mode_set *set); /** * @page_flip: * * Legacy entry point to schedule a flip to the given framebuffer. * * Page flipping is a synchronization mechanism that replaces the frame * buffer being scanned out by the CRTC with a new frame buffer during * vertical blanking, avoiding tearing (except when requested otherwise * through the DRM_MODE_PAGE_FLIP_ASYNC flag). When an application * requests a page flip the DRM core verifies that the new frame buffer * is large enough to be scanned out by the CRTC in the currently * configured mode and then calls the CRTC ->page_flip() operation with a * pointer to the new frame buffer. * * The driver must wait for any pending rendering to the new framebuffer * to complete before executing the flip. It should also wait for any * pending rendering from other drivers if the underlying buffer is a * shared dma-buf. * * An application can request to be notified when the page flip has * completed. The drm core will supply a struct &drm_event in the event * parameter in this case. This can be handled by the * drm_crtc_send_vblank_event() function, which the driver should call on * the provided event upon completion of the flip. Note that if * the driver supports vblank signalling and timestamping the vblank * counters and timestamps must agree with the ones returned from page * flip events. With the current vblank helper infrastructure this can * be achieved by holding a vblank reference while the page flip is * pending, acquired through drm_crtc_vblank_get() and released with * drm_crtc_vblank_put(). Drivers are free to implement their own vblank * counter and timestamp tracking though, e.g. if they have accurate * timestamp registers in hardware. * * FIXME: * * Up to that point drivers need to manage events themselves and can use * even->base.list freely for that. Specifically they need to ensure * that they don't send out page flip (or vblank) events for which the * corresponding drm file has been closed already. The drm core * unfortunately does not (yet) take care of that. Therefore drivers * currently must clean up and release pending events in their * ->preclose driver function. * * This callback is optional. * * NOTE: * * Very early versions of the KMS ABI mandated that the driver must * block (but not reject) any rendering to the old framebuffer until the * flip operation has completed and the old framebuffer is no longer * visible. This requirement has been lifted, and userspace is instead * expected to request delivery of an event and wait with recycling old * buffers until such has been received. * * RETURNS: * * 0 on success or a negative error code on failure. Note that if a * ->page_flip() operation is already pending the callback should return * -EBUSY. Pageflips on a disabled CRTC (either by setting a NULL mode * or just runtime disabled through DPMS respectively the new atomic * "ACTIVE" state) should result in an -EINVAL error code. */ int (*page_flip)(struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_pending_vblank_event *event, uint32_t flags); /** * @set_property: * * This is the legacy entry point to update a property attached to the * CRTC. * * Drivers implementing atomic modeset should use * drm_atomic_helper_crtc_set_property() to implement this hook. * * This callback is optional if the driver does not support any legacy * driver-private properties. * * RETURNS: * * 0 on success or a negative error code on failure. */ int (*set_property)(struct drm_crtc *crtc, struct drm_property *property, uint64_t val); /** * @atomic_duplicate_state: * * Duplicate the current atomic state for this CRTC and return it. * The core and helpers gurantee that any atomic state duplicated with * this hook and still owned by the caller (i.e. not transferred to the * driver by calling ->atomic_commit() from struct * &drm_mode_config_funcs) will be cleaned up by calling the * @atomic_destroy_state hook in this structure. * * Atomic drivers which don't subclass struct &drm_crtc should use * drm_atomic_helper_crtc_duplicate_state(). Drivers that subclass the * state structure to extend it with driver-private state should use * __drm_atomic_helper_crtc_duplicate_state() to make sure shared state is * duplicated in a consistent fashion across drivers. * * It is an error to call this hook before crtc->state has been * initialized correctly. * * NOTE: * * If the duplicate state references refcounted resources this hook must * acquire a reference for each of them. The driver must release these * references again in @atomic_destroy_state. * * RETURNS: * * Duplicated atomic state or NULL when the allocation failed. */ struct drm_crtc_state *(*atomic_duplicate_state)(struct drm_crtc *crtc); /** * @atomic_destroy_state: * * Destroy a state duplicated with @atomic_duplicate_state and release * or unreference all resources it references */ void (*atomic_destroy_state)(struct drm_crtc *crtc, struct drm_crtc_state *state); /** * @atomic_set_property: * * Decode a driver-private property value and store the decoded value * into the passed-in state structure. Since the atomic core decodes all * standardized properties (even for extensions beyond the core set of * properties which might not be implemented by all drivers) this * requires drivers to subclass the state structure. * * Such driver-private properties should really only be implemented for * truly hardware/vendor specific state. Instead it is preferred to * standardize atomic extension and decode the properties used to expose * such an extension in the core. * * Do not call this function directly, use * drm_atomic_crtc_set_property() instead. * * This callback is optional if the driver does not support any * driver-private atomic properties. * * NOTE: * * This function is called in the state assembly phase of atomic * modesets, which can be aborted for any reason (including on * userspace's request to just check whether a configuration would be * possible). Drivers MUST NOT touch any persistent state (hardware or * software) or data structures except the passed in @state parameter. * * Also since userspace controls in which order properties are set this * function must not do any input validation (since the state update is * incomplete and hence likely inconsistent). Instead any such input * validation must be done in the various atomic_check callbacks. * * RETURNS: * * 0 if the property has been found, -EINVAL if the property isn't * implemented by the driver (which should never happen, the core only * asks for properties attached to this CRTC). No other validation is * allowed by the driver. The core already checks that the property * value is within the range (integer, valid enum value, ...) the driver * set when registering the property. */ int (*atomic_set_property)(struct drm_crtc *crtc, struct drm_crtc_state *state, struct drm_property *property, uint64_t val); /** * @atomic_get_property: * * Reads out the decoded driver-private property. This is used to * implement the GETCRTC IOCTL. * * Do not call this function directly, use * drm_atomic_crtc_get_property() instead. * * This callback is optional if the driver does not support any * driver-private atomic properties. * * RETURNS: * * 0 on success, -EINVAL if the property isn't implemented by the * driver (which should never happen, the core only asks for * properties attached to this CRTC). */ int (*atomic_get_property)(struct drm_crtc *crtc, const struct drm_crtc_state *state, struct drm_property *property, uint64_t *val); }; /** * struct drm_crtc - central CRTC control structure * @dev: parent DRM device * @port: OF node used by drm_of_find_possible_crtcs() * @head: list management * @mutex: per-CRTC locking * @base: base KMS object for ID tracking etc. * @primary: primary plane for this CRTC * @cursor: cursor plane for this CRTC * @cursor_x: current x position of the cursor, used for universal cursor planes * @cursor_y: current y position of the cursor, used for universal cursor planes * @enabled: is this CRTC enabled? * @mode: current mode timings * @hwmode: mode timings as programmed to hw regs * @x: x position on screen * @y: y position on screen * @funcs: CRTC control functions * @gamma_size: size of gamma ramp * @gamma_store: gamma ramp values * @helper_private: mid-layer private data * @properties: property tracking for this CRTC * @state: current atomic state for this CRTC * @acquire_ctx: per-CRTC implicit acquire context used by atomic drivers for * legacy IOCTLs * * Each CRTC may have one or more connectors associated with it. This structure * allows the CRTC to be controlled. */ struct drm_crtc { struct drm_device *dev; struct device_node *port; struct list_head head; char *name; /* * crtc mutex * * This provides a read lock for the overall crtc state (mode, dpms * state, ...) and a write lock for everything which can be update * without a full modeset (fb, cursor data, ...) */ struct drm_modeset_lock mutex; struct drm_mode_object base; /* primary and cursor planes for CRTC */ struct drm_plane *primary; struct drm_plane *cursor; /* position of cursor plane on crtc */ int cursor_x; int cursor_y; bool enabled; /* Requested mode from modesetting. */ struct drm_display_mode mode; /* Programmed mode in hw, after adjustments for encoders, * crtc, panel scaling etc. Needed for timestamping etc. */ struct drm_display_mode hwmode; int x, y; const struct drm_crtc_funcs *funcs; /* CRTC gamma size for reporting to userspace */ uint32_t gamma_size; uint16_t *gamma_store; /* if you are using the helper */ const struct drm_crtc_helper_funcs *helper_private; struct drm_object_properties properties; struct drm_crtc_state *state; /* * For legacy crtc IOCTLs so that atomic drivers can get at the locking * acquire context. */ struct drm_modeset_acquire_ctx *acquire_ctx; }; /** * struct drm_connector_state - mutable connector state * @connector: backpointer to the connector * @crtc: CRTC to connect connector to, NULL if disabled * @best_encoder: can be used by helpers and drivers to select the encoder * @state: backpointer to global drm_atomic_state */ struct drm_connector_state { struct drm_connector *connector; struct drm_crtc *crtc; /* do not write directly, use drm_atomic_set_crtc_for_connector() */ struct drm_encoder *best_encoder; struct drm_atomic_state *state; }; /** * struct drm_connector_funcs - control connectors on a given device * * Each CRTC may have one or more connectors attached to it. The functions * below allow the core DRM code to control connectors, enumerate available modes, * etc. */ struct drm_connector_funcs { /** * @dpms: * * Legacy entry point to set the per-connector DPMS state. Legacy DPMS * is exposed as a standard property on the connector, but diverted to * this callback in the drm core. Note that atomic drivers don't * implement the 4 level DPMS support on the connector any more, but * instead only have an on/off "ACTIVE" property on the CRTC object. * * Drivers implementing atomic modeset should use * drm_atomic_helper_connector_dpms() to implement this hook. * * RETURNS: * * 0 on success or a negative error code on failure. */ int (*dpms)(struct drm_connector *connector, int mode); /** * @reset: * * Reset connector hardware and software state to off. This function isn't * called by the core directly, only through drm_mode_config_reset(). * It's not a helper hook only for historical reasons. * * Atomic drivers can use drm_atomic_helper_connector_reset() to reset * atomic state using this hook. */ void (*reset)(struct drm_connector *connector); /** * @detect: * * Check to see if anything is attached to the connector. The parameter * force is set to false whilst polling, true when checking the * connector due to a user request. force can be used by the driver to * avoid expensive, destructive operations during automated probing. * * FIXME: * * Note that this hook is only called by the probe helper. It's not in * the helper library vtable purely for historical reasons. The only DRM * core entry point to probe connector state is @fill_modes. * * RETURNS: * * drm_connector_status indicating the connector's status. */ enum drm_connector_status (*detect)(struct drm_connector *connector, bool force); /** * @force: * * This function is called to update internal encoder state when the * connector is forced to a certain state by userspace, either through * the sysfs interfaces or on the kernel cmdline. In that case the * @detect callback isn't called. * * FIXME: * * Note that this hook is only called by the probe helper. It's not in * the helper library vtable purely for historical reasons. The only DRM * core entry point to probe connector state is @fill_modes. */ void (*force)(struct drm_connector *connector); /** * @fill_modes: * * Entry point for output detection and basic mode validation. The * driver should reprobe the output if needed (e.g. when hotplug * handling is unreliable), add all detected modes to connector->modes * and filter out any the device can't support in any configuration. It * also needs to filter out any modes wider or higher than the * parameters max_width and max_height indicate. * * The drivers must also prune any modes no longer valid from * connector->modes. Furthermore it must update connector->status and * connector->edid. If no EDID has been received for this output * connector->edid must be NULL. * * Drivers using the probe helpers should use * drm_helper_probe_single_connector_modes() or * drm_helper_probe_single_connector_modes_nomerge() to implement this * function. * * RETURNS: * * The number of modes detected and filled into connector->modes. */ int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height); /** * @set_property: * * This is the legacy entry point to update a property attached to the * connector. * * Drivers implementing atomic modeset should use * drm_atomic_helper_connector_set_property() to implement this hook. * * This callback is optional if the driver does not support any legacy * driver-private properties. * * RETURNS: * * 0 on success or a negative error code on failure. */ int (*set_property)(struct drm_connector *connector, struct drm_property *property, uint64_t val); /** * @destroy: * * Clean up connector resources. This is called at driver unload time * through drm_mode_config_cleanup(). It can also be called at runtime * when a connector is being hot-unplugged for drivers that support * connector hotplugging (e.g. DisplayPort MST). */ void (*destroy)(struct drm_connector *connector); /** * @atomic_duplicate_state: * * Duplicate the current atomic state for this connector and return it. * The core and helpers gurantee that any atomic state duplicated with * this hook and still owned by the caller (i.e. not transferred to the * driver by calling ->atomic_commit() from struct * &drm_mode_config_funcs) will be cleaned up by calling the * @atomic_destroy_state hook in this structure. * * Atomic drivers which don't subclass struct &drm_connector_state should use * drm_atomic_helper_connector_duplicate_state(). Drivers that subclass the * state structure to extend it with driver-private state should use * __drm_atomic_helper_connector_duplicate_state() to make sure shared state is * duplicated in a consistent fashion across drivers. * * It is an error to call this hook before connector->state has been * initialized correctly. * * NOTE: * * If the duplicate state references refcounted resources this hook must * acquire a reference for each of them. The driver must release these * references again in @atomic_destroy_state. * * RETURNS: * * Duplicated atomic state or NULL when the allocation failed. */ struct drm_connector_state *(*atomic_duplicate_state)(struct drm_connector *connector); /** * @atomic_destroy_state: * * Destroy a state duplicated with @atomic_duplicate_state and release * or unreference all resources it references */ void (*atomic_destroy_state)(struct drm_connector *connector, struct drm_connector_state *state); /** * @atomic_set_property: * * Decode a driver-private property value and store the decoded value * into the passed-in state structure. Since the atomic core decodes all * standardized properties (even for extensions beyond the core set of * properties which might not be implemented by all drivers) this * requires drivers to subclass the state structure. * * Such driver-private properties should really only be implemented for * truly hardware/vendor specific state. Instead it is preferred to * standardize atomic extension and decode the properties used to expose * such an extension in the core. * * Do not call this function directly, use * drm_atomic_connector_set_property() instead. * * This callback is optional if the driver does not support any * driver-private atomic properties. * * NOTE: * * This function is called in the state assembly phase of atomic * modesets, which can be aborted for any reason (including on * userspace's request to just check whether a configuration would be * possible). Drivers MUST NOT touch any persistent state (hardware or * software) or data structures except the passed in @state parameter. * * Also since userspace controls in which order properties are set this * function must not do any input validation (since the state update is * incomplete and hence likely inconsistent). Instead any such input * validation must be done in the various atomic_check callbacks. * * RETURNS: * * 0 if the property has been found, -EINVAL if the property isn't * implemented by the driver (which shouldn't ever happen, the core only * asks for properties attached to this connector). No other validation * is allowed by the driver. The core already checks that the property * value is within the range (integer, valid enum value, ...) the driver * set when registering the property. */ int (*atomic_set_property)(struct drm_connector *connector, struct drm_connector_state *state, struct drm_property *property, uint64_t val); /** * @atomic_get_property: * * Reads out the decoded driver-private property. This is used to * implement the GETCONNECTOR IOCTL. * * Do not call this function directly, use * drm_atomic_connector_get_property() instead. * * This callback is optional if the driver does not support any * driver-private atomic properties. * * RETURNS: * * 0 on success, -EINVAL if the property isn't implemented by the * driver (which shouldn't ever happen, the core only asks for * properties attached to this connector). */ int (*atomic_get_property)(struct drm_connector *connector, const struct drm_connector_state *state, struct drm_property *property, uint64_t *val); }; /** * struct drm_encoder_funcs - encoder controls * * Encoders sit between CRTCs and connectors. */ struct drm_encoder_funcs { /** * @reset: * * Reset encoder hardware and software state to off. This function isn't * called by the core directly, only through drm_mode_config_reset(). * It's not a helper hook only for historical reasons. */ void (*reset)(struct drm_encoder *encoder); /** * @destroy: * * Clean up encoder resources. This is only called at driver unload time * through drm_mode_config_cleanup() since an encoder cannot be * hotplugged in DRM. */ void (*destroy)(struct drm_encoder *encoder); }; #define DRM_CONNECTOR_MAX_ENCODER 3 /** * struct drm_encoder - central DRM encoder structure * @dev: parent DRM device * @head: list management * @base: base KMS object * @name: encoder name * @encoder_type: one of the %DRM_MODE_ENCODER_ types in drm_mode.h * @possible_crtcs: bitmask of potential CRTC bindings * @possible_clones: bitmask of potential sibling encoders for cloning * @crtc: currently bound CRTC * @bridge: bridge associated to the encoder * @funcs: control functions * @helper_private: mid-layer private data * * CRTCs drive pixels to encoders, which convert them into signals * appropriate for a given connector or set of connectors. */ struct drm_encoder { struct drm_device *dev; struct list_head head; struct drm_mode_object base; char *name; int encoder_type; uint32_t possible_crtcs; uint32_t possible_clones; struct drm_crtc *crtc; struct drm_bridge *bridge; const struct drm_encoder_funcs *funcs; const struct drm_encoder_helper_funcs *helper_private; }; /* should we poll this connector for connects and disconnects */ /* hot plug detectable */ #define DRM_CONNECTOR_POLL_HPD (1 << 0) /* poll for connections */ #define DRM_CONNECTOR_POLL_CONNECT (1 << 1) /* can cleanly poll for disconnections without flickering the screen */ /* DACs should rarely do this without a lot of testing */ #define DRM_CONNECTOR_POLL_DISCONNECT (1 << 2) #define MAX_ELD_BYTES 128 /** * struct drm_connector - central DRM connector control structure * @dev: parent DRM device * @kdev: kernel device for sysfs attributes * @attr: sysfs attributes * @head: list management * @base: base KMS object * @name: connector name * @connector_type: one of the %DRM_MODE_CONNECTOR_ types from drm_mode.h * @connector_type_id: index into connector type enum * @interlace_allowed: can this connector handle interlaced modes? * @doublescan_allowed: can this connector handle doublescan? * @stereo_allowed: can this connector handle stereo modes? * @modes: modes available on this connector (from fill_modes() + user) * @status: one of the drm_connector_status enums (connected, not, or unknown) * @probed_modes: list of modes derived directly from the display * @display_info: information about attached display (e.g. from EDID) * @funcs: connector control functions * @edid_blob_ptr: DRM property containing EDID if present * @properties: property tracking for this connector * @path_blob_ptr: DRM blob property data for the DP MST path property * @polled: a %DRM_CONNECTOR_POLL_ value for core driven polling * @dpms: current dpms state * @helper_private: mid-layer private data * @cmdline_mode: mode line parsed from the kernel cmdline for this connector * @force: a %DRM_FORCE_ state for forced mode sets * @override_edid: has the EDID been overwritten through debugfs for testing? * @encoder_ids: valid encoders for this connector * @encoder: encoder driving this connector, if any * @eld: EDID-like data, if present * @dvi_dual: dual link DVI, if found * @max_tmds_clock: max clock rate, if found * @latency_present: AV delay info from ELD, if found * @video_latency: video latency info from ELD, if found * @audio_latency: audio latency info from ELD, if found * @null_edid_counter: track sinks that give us all zeros for the EDID * @bad_edid_counter: track sinks that give us an EDID with invalid checksum * @edid_corrupt: indicates whether the last read EDID was corrupt * @debugfs_entry: debugfs directory for this connector * @state: current atomic state for this connector * @has_tile: is this connector connected to a tiled monitor * @tile_group: tile group for the connected monitor * @tile_is_single_monitor: whether the tile is one monitor housing * @num_h_tile: number of horizontal tiles in the tile group * @num_v_tile: number of vertical tiles in the tile group * @tile_h_loc: horizontal location of this tile * @tile_v_loc: vertical location of this tile * @tile_h_size: horizontal size of this tile. * @tile_v_size: vertical size of this tile. * * Each connector may be connected to one or more CRTCs, or may be clonable by * another connector if they can share a CRTC. Each connector also has a specific * position in the broader display (referred to as a 'screen' though it could * span multiple monitors). */ struct drm_connector { struct drm_device *dev; struct device *kdev; struct device_attribute *attr; struct list_head head; struct drm_mode_object base; char *name; int connector_type; int connector_type_id; bool interlace_allowed; bool doublescan_allowed; bool stereo_allowed; struct list_head modes; /* list of modes on this connector */ enum drm_connector_status status; /* these are modes added by probing with DDC or the BIOS */ struct list_head probed_modes; struct drm_display_info display_info; const struct drm_connector_funcs *funcs; struct drm_property_blob *edid_blob_ptr; struct drm_object_properties properties; struct drm_property_blob *path_blob_ptr; struct drm_property_blob *tile_blob_ptr; uint8_t polled; /* DRM_CONNECTOR_POLL_* */ /* requested DPMS state */ int dpms; const struct drm_connector_helper_funcs *helper_private; /* forced on connector */ struct drm_cmdline_mode cmdline_mode; enum drm_connector_force force; bool override_edid; uint32_t encoder_ids[DRM_CONNECTOR_MAX_ENCODER]; struct drm_encoder *encoder; /* currently active encoder */ /* EDID bits */ uint8_t eld[MAX_ELD_BYTES]; bool dvi_dual; int max_tmds_clock; /* in MHz */ bool latency_present[2]; int video_latency[2]; /* [0]: progressive, [1]: interlaced */ int audio_latency[2]; int null_edid_counter; /* needed to workaround some HW bugs where we get all 0s */ unsigned bad_edid_counter; /* Flag for raw EDID header corruption - used in Displayport * compliance testing - * Displayport Link CTS Core 1.2 rev1.1 4.2.2.6 */ bool edid_corrupt; struct dentry *debugfs_entry; struct drm_connector_state *state; /* DisplayID bits */ bool has_tile; struct drm_tile_group *tile_group; bool tile_is_single_monitor; uint8_t num_h_tile, num_v_tile; uint8_t tile_h_loc, tile_v_loc; uint16_t tile_h_size, tile_v_size; }; /** * struct drm_plane_state - mutable plane state * @plane: backpointer to the plane * @crtc: currently bound CRTC, NULL if disabled * @fb: currently bound framebuffer * @fence: optional fence to wait for before scanning out @fb * @crtc_x: left position of visible portion of plane on crtc * @crtc_y: upper position of visible portion of plane on crtc * @crtc_w: width of visible portion of plane on crtc * @crtc_h: height of visible portion of plane on crtc * @src_x: left position of visible portion of plane within * plane (in 16.16) * @src_y: upper position of visible portion of plane within * plane (in 16.16) * @src_w: width of visible portion of plane (in 16.16) * @src_h: height of visible portion of plane (in 16.16) * @state: backpointer to global drm_atomic_state */ struct drm_plane_state { struct drm_plane *plane; struct drm_crtc *crtc; /* do not write directly, use drm_atomic_set_crtc_for_plane() */ struct drm_framebuffer *fb; /* do not write directly, use drm_atomic_set_fb_for_plane() */ struct fence *fence; /* Signed dest location allows it to be partially off screen */ int32_t crtc_x, crtc_y; uint32_t crtc_w, crtc_h; /* Source values are 16.16 fixed point */ uint32_t src_x, src_y; uint32_t src_h, src_w; /* Plane rotation */ unsigned int rotation; struct drm_atomic_state *state; }; /** * struct drm_plane_funcs - driver plane control functions */ struct drm_plane_funcs { /** * @update_plane: * * This is the legacy entry point to enable and configure the plane for * the given CRTC and framebuffer. It is never called to disable the * plane, i.e. the passed-in crtc and fb paramters are never NULL. * * The source rectangle in frame buffer memory coordinates is given by * the src_x, src_y, src_w and src_h parameters (as 16.16 fixed point * values). Devices that don't support subpixel plane coordinates can * ignore the fractional part. * * The destination rectangle in CRTC coordinates is given by the * crtc_x, crtc_y, crtc_w and crtc_h parameters (as integer values). * Devices scale the source rectangle to the destination rectangle. If * scaling is not supported, and the source rectangle size doesn't match * the destination rectangle size, the driver must return a * -EINVAL error. * * Drivers implementing atomic modeset should use * drm_atomic_helper_update_plane() to implement this hook. * * RETURNS: * * 0 on success or a negative error code on failure. */ int (*update_plane)(struct drm_plane *plane, struct drm_crtc *crtc, struct drm_framebuffer *fb, int crtc_x, int crtc_y, unsigned int crtc_w, unsigned int crtc_h, uint32_t src_x, uint32_t src_y, uint32_t src_w, uint32_t src_h); /** * @disable_plane: * * This is the legacy entry point to disable the plane. The DRM core * calls this method in response to a DRM_IOCTL_MODE_SETPLANE IOCTL call * with the frame buffer ID set to 0. Disabled planes must not be * processed by the CRTC. * * Drivers implementing atomic modeset should use * drm_atomic_helper_disable_plane() to implement this hook. * * RETURNS: * * 0 on success or a negative error code on failure. */ int (*disable_plane)(struct drm_plane *plane); /** * @destroy: * * Clean up plane resources. This is only called at driver unload time * through drm_mode_config_cleanup() since a plane cannot be hotplugged * in DRM. */ void (*destroy)(struct drm_plane *plane); /** * @reset: * * Reset plane hardware and software state to off. This function isn't * called by the core directly, only through drm_mode_config_reset(). * It's not a helper hook only for historical reasons. * * Atomic drivers can use drm_atomic_helper_plane_reset() to reset * atomic state using this hook. */ void (*reset)(struct drm_plane *plane); /** * @set_property: * * This is the legacy entry point to update a property attached to the * plane. * * Drivers implementing atomic modeset should use * drm_atomic_helper_plane_set_property() to implement this hook. * * This callback is optional if the driver does not support any legacy * driver-private properties. * * RETURNS: * * 0 on success or a negative error code on failure. */ int (*set_property)(struct drm_plane *plane, struct drm_property *property, uint64_t val); /** * @atomic_duplicate_state: * * Duplicate the current atomic state for this plane and return it. * The core and helpers gurantee that any atomic state duplicated with * this hook and still owned by the caller (i.e. not transferred to the * driver by calling ->atomic_commit() from struct * &drm_mode_config_funcs) will be cleaned up by calling the * @atomic_destroy_state hook in this structure. * * Atomic drivers which don't subclass struct &drm_plane_state should use * drm_atomic_helper_plane_duplicate_state(). Drivers that subclass the * state structure to extend it with driver-private state should use * __drm_atomic_helper_plane_duplicate_state() to make sure shared state is * duplicated in a consistent fashion across drivers. * * It is an error to call this hook before plane->state has been * initialized correctly. * * NOTE: * * If the duplicate state references refcounted resources this hook must * acquire a reference for each of them. The driver must release these * references again in @atomic_destroy_state. * * RETURNS: * * Duplicated atomic state or NULL when the allocation failed. */ struct drm_plane_state *(*atomic_duplicate_state)(struct drm_plane *plane); /** * @atomic_destroy_state: * * Destroy a state duplicated with @atomic_duplicate_state and release * or unreference all resources it references */ void (*atomic_destroy_state)(struct drm_plane *plane, struct drm_plane_state *state); /** * @atomic_set_property: * * Decode a driver-private property value and store the decoded value * into the passed-in state structure. Since the atomic core decodes all * standardized properties (even for extensions beyond the core set of * properties which might not be implemented by all drivers) this * requires drivers to subclass the state structure. * * Such driver-private properties should really only be implemented for * truly hardware/vendor specific state. Instead it is preferred to * standardize atomic extension and decode the properties used to expose * such an extension in the core. * * Do not call this function directly, use * drm_atomic_plane_set_property() instead. * * This callback is optional if the driver does not support any * driver-private atomic properties. * * NOTE: * * This function is called in the state assembly phase of atomic * modesets, which can be aborted for any reason (including on * userspace's request to just check whether a configuration would be * possible). Drivers MUST NOT touch any persistent state (hardware or * software) or data structures except the passed in @state parameter. * * Also since userspace controls in which order properties are set this * function must not do any input validation (since the state update is * incomplete and hence likely inconsistent). Instead any such input * validation must be done in the various atomic_check callbacks. * * RETURNS: * * 0 if the property has been found, -EINVAL if the property isn't * implemented by the driver (which shouldn't ever happen, the core only * asks for properties attached to this plane). No other validation is * allowed by the driver. The core already checks that the property * value is within the range (integer, valid enum value, ...) the driver * set when registering the property. */ int (*atomic_set_property)(struct drm_plane *plane, struct drm_plane_state *state, struct drm_property *property, uint64_t val); /** * @atomic_get_property: * * Reads out the decoded driver-private property. This is used to * implement the GETPLANE IOCTL. * * Do not call this function directly, use * drm_atomic_plane_get_property() instead. * * This callback is optional if the driver does not support any * driver-private atomic properties. * * RETURNS: * * 0 on success, -EINVAL if the property isn't implemented by the * driver (which should never happen, the core only asks for * properties attached to this plane). */ int (*atomic_get_property)(struct drm_plane *plane, const struct drm_plane_state *state, struct drm_property *property, uint64_t *val); }; enum drm_plane_type { DRM_PLANE_TYPE_OVERLAY, DRM_PLANE_TYPE_PRIMARY, DRM_PLANE_TYPE_CURSOR, }; /** * struct drm_plane - central DRM plane control structure * @dev: DRM device this plane belongs to * @head: for list management * @base: base mode object * @possible_crtcs: pipes this plane can be bound to * @format_types: array of formats supported by this plane * @format_count: number of formats supported * @format_default: driver hasn't supplied supported formats for the plane * @crtc: currently bound CRTC * @fb: currently bound fb * @old_fb: Temporary tracking of the old fb while a modeset is ongoing. Used by * drm_mode_set_config_internal() to implement correct refcounting. * @funcs: helper functions * @properties: property tracking for this plane * @type: type of plane (overlay, primary, cursor) * @state: current atomic state for this plane */ struct drm_plane { struct drm_device *dev; struct list_head head; char *name; struct drm_modeset_lock mutex; struct drm_mode_object base; uint32_t possible_crtcs; uint32_t *format_types; unsigned int format_count; bool format_default; struct drm_crtc *crtc; struct drm_framebuffer *fb; struct drm_framebuffer *old_fb; const struct drm_plane_funcs *funcs; struct drm_object_properties properties; enum drm_plane_type type; const struct drm_plane_helper_funcs *helper_private; struct drm_plane_state *state; }; /** * struct drm_bridge_funcs - drm_bridge control functions * @attach: Called during drm_bridge_attach */ struct drm_bridge_funcs { int (*attach)(struct drm_bridge *bridge); /** * @mode_fixup: * * This callback is used to validate and adjust a mode. The paramater * mode is the display mode that should be fed to the next element in * the display chain, either the final &drm_connector or the next * &drm_bridge. The parameter adjusted_mode is the input mode the bridge * requires. It can be modified by this callback and does not need to * match mode. * * This is the only hook that allows a bridge to reject a modeset. If * this function passes all other callbacks must succeed for this * configuration. * * NOTE: * * This function is called in the check phase of atomic modesets, which * can be aborted for any reason (including on userspace's request to * just check whether a configuration would be possible). Drivers MUST * NOT touch any persistent state (hardware or software) or data * structures except the passed in @state parameter. * * RETURNS: * * True if an acceptable configuration is possible, false if the modeset * operation should be rejected. */ bool (*mode_fixup)(struct drm_bridge *bridge, const struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode); /** * @disable: * * This callback should disable the bridge. It is called right before * the preceding element in the display pipe is disabled. If the * preceding element is a bridge this means it's called before that * bridge's ->disable() function. If the preceding element is a * &drm_encoder it's called right before the encoder's ->disable(), * ->prepare() or ->dpms() hook from struct &drm_encoder_helper_funcs. * * The bridge can assume that the display pipe (i.e. clocks and timing * signals) feeding it is still running when this callback is called. */ void (*disable)(struct drm_bridge *bridge); /** * @post_disable: * * This callback should disable the bridge. It is called right after * the preceding element in the display pipe is disabled. If the * preceding element is a bridge this means it's called after that * bridge's ->post_disable() function. If the preceding element is a * &drm_encoder it's called right after the encoder's ->disable(), * ->prepare() or ->dpms() hook from struct &drm_encoder_helper_funcs. * * The bridge must assume that the display pipe (i.e. clocks and timing * singals) feeding it is no longer running when this callback is * called. */ void (*post_disable)(struct drm_bridge *bridge); /** * @mode_set: * * This callback should set the given mode on the bridge. It is called * after the ->mode_set() callback for the preceding element in the * display pipeline has been called already. The display pipe (i.e. * clocks and timing signals) is off when this function is called. */ void (*mode_set)(struct drm_bridge *bridge, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode); /** * @pre_enable: * * This callback should enable the bridge. It is called right before * the preceding element in the display pipe is enabled. If the * preceding element is a bridge this means it's called before that * bridge's ->pre_enable() function. If the preceding element is a * &drm_encoder it's called right before the encoder's ->enable(), * ->commit() or ->dpms() hook from struct &drm_encoder_helper_funcs. * * The display pipe (i.e. clocks and timing signals) feeding this bridge * will not yet be running when this callback is called. The bridge must * not enable the display link feeding the next bridge in the chain (if * there is one) when this callback is called. */ void (*pre_enable)(struct drm_bridge *bridge); /** * @enable: * * This callback should enable the bridge. It is called right after * the preceding element in the display pipe is enabled. If the * preceding element is a bridge this means it's called after that * bridge's ->enable() function. If the preceding element is a * &drm_encoder it's called right after the encoder's ->enable(), * ->commit() or ->dpms() hook from struct &drm_encoder_helper_funcs. * * The bridge can assume that the display pipe (i.e. clocks and timing * signals) feeding it is running when this callback is called. This * callback must enable the display link feeding the next bridge in the * chain if there is one. */ void (*enable)(struct drm_bridge *bridge); }; /** * struct drm_bridge - central DRM bridge control structure * @dev: DRM device this bridge belongs to * @encoder: encoder to which this bridge is connected * @next: the next bridge in the encoder chain * @of_node: device node pointer to the bridge * @list: to keep track of all added bridges * @funcs: control functions * @driver_private: pointer to the bridge driver's internal context */ struct drm_bridge { struct drm_device *dev; struct drm_encoder *encoder; struct drm_bridge *next; #ifdef CONFIG_OF struct device_node *of_node; #endif struct list_head list; const struct drm_bridge_funcs *funcs; void *driver_private; }; /** * struct drm_atomic_state - the global state object for atomic updates * @dev: parent DRM device * @allow_modeset: allow full modeset * @legacy_cursor_update: hint to enforce legacy cursor IOCTL semantics * @planes: pointer to array of plane pointers * @plane_states: pointer to array of plane states pointers * @crtcs: pointer to array of CRTC pointers * @crtc_states: pointer to array of CRTC states pointers * @num_connector: size of the @connectors and @connector_states arrays * @connectors: pointer to array of connector pointers * @connector_states: pointer to array of connector states pointers * @acquire_ctx: acquire context for this atomic modeset state update */ struct drm_atomic_state { struct drm_device *dev; bool allow_modeset : 1; bool legacy_cursor_update : 1; struct drm_plane **planes; struct drm_plane_state **plane_states; struct drm_crtc **crtcs; struct drm_crtc_state **crtc_states; int num_connector; struct drm_connector **connectors; struct drm_connector_state **connector_states; struct drm_modeset_acquire_ctx *acquire_ctx; }; /** * struct drm_mode_set - new values for a CRTC config change * @fb: framebuffer to use for new config * @crtc: CRTC whose configuration we're about to change * @mode: mode timings to use * @x: position of this CRTC relative to @fb * @y: position of this CRTC relative to @fb * @connectors: array of connectors to drive with this CRTC if possible * @num_connectors: size of @connectors array * * Represents a single crtc the connectors that it drives with what mode * and from which framebuffer it scans out from. * * This is used to set modes. */ struct drm_mode_set { struct drm_framebuffer *fb; struct drm_crtc *crtc; struct drm_display_mode *mode; uint32_t x; uint32_t y; struct drm_connector **connectors; size_t num_connectors; }; /** * struct drm_mode_config_funcs - basic driver provided mode setting functions * * Some global (i.e. not per-CRTC, connector, etc) mode setting functions that * involve drivers. */ struct drm_mode_config_funcs { /** * @fb_create: * * Create a new framebuffer object. The core does basic checks on the * requested metadata, but most of that is left to the driver. See * struct &drm_mode_fb_cmd2 for details. * * If the parameters are deemed valid and the backing storage objects in * the underlying memory manager all exist, then the driver allocates * a new &drm_framebuffer structure, subclassed to contain * driver-specific information (like the internal native buffer object * references). It also needs to fill out all relevant metadata, which * should be done by calling drm_helper_mode_fill_fb_struct(). * * The initialization is finalized by calling drm_framebuffer_init(), * which registers the framebuffer and makes it accessible to other * threads. * * RETURNS: * * A new framebuffer with an initial reference count of 1 or a negative * error code encoded with ERR_PTR(). */ struct drm_framebuffer *(*fb_create)(struct drm_device *dev, struct drm_file *file_priv, const struct drm_mode_fb_cmd2 *mode_cmd); /** * @output_poll_changed: * * Callback used by helpers to inform the driver of output configuration * changes. * * Drivers implementing fbdev emulation with the helpers can call * drm_fb_helper_hotplug_changed from this hook to inform the fbdev * helper of output changes. * * FIXME: * * Except that there's no vtable for device-level helper callbacks * there's no reason this is a core function. */ void (*output_poll_changed)(struct drm_device *dev); /** * @atomic_check: * * This is the only hook to validate an atomic modeset update. This * function must reject any modeset and state changes which the hardware * or driver doesn't support. This includes but is of course not limited * to: * * - Checking that the modes, framebuffers, scaling and placement * requirements and so on are within the limits of the hardware. * * - Checking that any hidden shared resources are not oversubscribed. * This can be shared PLLs, shared lanes, overall memory bandwidth, * display fifo space (where shared between planes or maybe even * CRTCs). * * - Checking that virtualized resources exported to userspace are not * oversubscribed. For various reasons it can make sense to expose * more planes, crtcs or encoders than which are physically there. One * example is dual-pipe operations (which generally should be hidden * from userspace if when lockstepped in hardware, exposed otherwise), * where a plane might need 1 hardware plane (if it's just on one * pipe), 2 hardware planes (when it spans both pipes) or maybe even * shared a hardware plane with a 2nd plane (if there's a compatible * plane requested on the area handled by the other pipe). * * - Check that any transitional state is possible and that if * requested, the update can indeed be done in the vblank period * without temporarily disabling some functions. * * - Check any other constraints the driver or hardware might have. * * - This callback also needs to correctly fill out the &drm_crtc_state * in this update to make sure that drm_atomic_crtc_needs_modeset() * reflects the nature of the possible update and returns true if and * only if the update cannot be applied without tearing within one * vblank on that CRTC. The core uses that information to reject * updates which require a full modeset (i.e. blanking the screen, or * at least pausing updates for a substantial amount of time) if * userspace has disallowed that in its request. * * - The driver also does not need to repeat basic input validation * like done for the corresponding legacy entry points. The core does * that before calling this hook. * * See the documentation of @atomic_commit for an exhaustive list of * error conditions which don't have to be checked at the * ->atomic_check() stage? * * See the documentation for struct &drm_atomic_state for how exactly * an atomic modeset update is described. * * Drivers using the atomic helpers can implement this hook using * drm_atomic_helper_check(), or one of the exported sub-functions of * it. * * RETURNS: * * 0 on success or one of the below negative error codes: * * - -EINVAL, if any of the above constraints are violated. * * - -EDEADLK, when returned from an attempt to acquire an additional * &drm_modeset_lock through drm_modeset_lock(). * * - -ENOMEM, if allocating additional state sub-structures failed due * to lack of memory. * * - -EINTR, -EAGAIN or -ERESTARTSYS, if the IOCTL should be restarted. * This can either be due to a pending signal, or because the driver * needs to completely bail out to recover from an exceptional * situation like a GPU hang. From a userspace point all errors are * treated equally. */ int (*atomic_check)(struct drm_device *dev, struct drm_atomic_state *state); /** * @atomic_commit: * * This is the only hook to commit an atomic modeset update. The core * guarantees that @atomic_check has been called successfully before * calling this function, and that nothing has been changed in the * interim. * * See the documentation for struct &drm_atomic_state for how exactly * an atomic modeset update is described. * * Drivers using the atomic helpers can implement this hook using * drm_atomic_helper_commit(), or one of the exported sub-functions of * it. * * Asynchronous commits (as indicated with the async parameter) must * do any preparatory work which might result in an unsuccessful commit * in the context of this callback. The only exceptions are hardware * errors resulting in -EIO. But even in that case the driver must * ensure that the display pipe is at least running, to avoid * compositors crashing when pageflips don't work. Anything else, * specifically committing the update to the hardware, should be done * without blocking the caller. For updates which do not require a * modeset this must be guaranteed. * * The driver must wait for any pending rendering to the new * framebuffers to complete before executing the flip. It should also * wait for any pending rendering from other drivers if the underlying * buffer is a shared dma-buf. Asynchronous commits must not wait for * rendering in the context of this callback. * * An application can request to be notified when the atomic commit has * completed. These events are per-CRTC and can be distinguished by the * CRTC index supplied in &drm_event to userspace. * * The drm core will supply a struct &drm_event in the event * member of each CRTC's &drm_crtc_state structure. This can be handled by the * drm_crtc_send_vblank_event() function, which the driver should call on * the provided event upon completion of the atomic commit. Note that if * the driver supports vblank signalling and timestamping the vblank * counters and timestamps must agree with the ones returned from page * flip events. With the current vblank helper infrastructure this can * be achieved by holding a vblank reference while the page flip is * pending, acquired through drm_crtc_vblank_get() and released with * drm_crtc_vblank_put(). Drivers are free to implement their own vblank * counter and timestamp tracking though, e.g. if they have accurate * timestamp registers in hardware. * * NOTE: * * Drivers are not allowed to shut down any display pipe successfully * enabled through an atomic commit on their own. Doing so can result in * compositors crashing if a page flip is suddenly rejected because the * pipe is off. * * RETURNS: * * 0 on success or one of the below negative error codes: * * - -EBUSY, if an asynchronous updated is requested and there is * an earlier updated pending. Drivers are allowed to support a queue * of outstanding updates, but currently no driver supports that. * Note that drivers must wait for preceding updates to complete if a * synchronous update is requested, they are not allowed to fail the * commit in that case. * * - -ENOMEM, if the driver failed to allocate memory. Specifically * this can happen when trying to pin framebuffers, which must only * be done when committing the state. * * - -ENOSPC, as a refinement of the more generic -ENOMEM to indicate * that the driver has run out of vram, iommu space or similar GPU * address space needed for framebuffer. * * - -EIO, if the hardware completely died. * * - -EINTR, -EAGAIN or -ERESTARTSYS, if the IOCTL should be restarted. * This can either be due to a pending signal, or because the driver * needs to completely bail out to recover from an exceptional * situation like a GPU hang. From a userspace point of view all errors are * treated equally. * * This list is exhaustive. Specifically this hook is not allowed to * return -EINVAL (any invalid requests should be caught in * @atomic_check) or -EDEADLK (this function must not acquire * additional modeset locks). */ int (*atomic_commit)(struct drm_device *dev, struct drm_atomic_state *state, bool async); /** * @atomic_state_alloc: * * This optional hook can be used by drivers that want to subclass struct * &drm_atomic_state to be able to track their own driver-private global * state easily. If this hook is implemented, drivers must also * implement @atomic_state_clear and @atomic_state_free. * * RETURNS: * * A new &drm_atomic_state on success or NULL on failure. */ struct drm_atomic_state *(*atomic_state_alloc)(struct drm_device *dev); /** * @atomic_state_clear: * * This hook must clear any driver private state duplicated into the * passed-in &drm_atomic_state. This hook is called when the caller * encountered a &drm_modeset_lock deadlock and needs to drop all * already acquired locks as part of the deadlock avoidance dance * implemented in drm_modeset_lock_backoff(). * * Any duplicated state must be invalidated since a concurrent atomic * update might change it, and the drm atomic interfaces always apply * updates as relative changes to the current state. * * Drivers that implement this must call drm_atomic_state_default_clear() * to clear common state. */ void (*atomic_state_clear)(struct drm_atomic_state *state); /** * @atomic_state_free: * * This hook needs driver private resources and the &drm_atomic_state * itself. Note that the core first calls drm_atomic_state_clear() to * avoid code duplicate between the clear and free hooks. * * Drivers that implement this must call drm_atomic_state_default_free() * to release common resources. */ void (*atomic_state_free)(struct drm_atomic_state *state); }; /** * struct drm_mode_config - Mode configuration control structure * @mutex: mutex protecting KMS related lists and structures * @connection_mutex: ww mutex protecting connector state and routing * @acquire_ctx: global implicit acquire context used by atomic drivers for * legacy IOCTLs * @idr_mutex: mutex for KMS ID allocation and management * @crtc_idr: main KMS ID tracking object * @fb_lock: mutex to protect fb state and lists * @num_fb: number of fbs available * @fb_list: list of framebuffers available * @num_connector: number of connectors on this device * @connector_list: list of connector objects * @num_encoder: number of encoders on this device * @encoder_list: list of encoder objects * @num_overlay_plane: number of overlay planes on this device * @num_total_plane: number of universal (i.e. with primary/curso) planes on this device * @plane_list: list of plane objects * @num_crtc: number of CRTCs on this device * @crtc_list: list of CRTC objects * @property_list: list of property objects * @min_width: minimum pixel width on this device * @min_height: minimum pixel height on this device * @max_width: maximum pixel width on this device * @max_height: maximum pixel height on this device * @funcs: core driver provided mode setting functions * @fb_base: base address of the framebuffer * @poll_enabled: track polling support for this device * @poll_running: track polling status for this device * @output_poll_work: delayed work for polling in process context * @property_blob_list: list of all the blob property objects * @blob_lock: mutex for blob property allocation and management * @*_property: core property tracking * @preferred_depth: preferred RBG pixel depth, used by fb helpers * @prefer_shadow: hint to userspace to prefer shadow-fb rendering * @async_page_flip: does this device support async flips on the primary plane? * @cursor_width: hint to userspace for max cursor width * @cursor_height: hint to userspace for max cursor height * * Core mode resource tracking structure. All CRTC, encoders, and connectors * enumerated by the driver are added here, as are global properties. Some * global restrictions are also here, e.g. dimension restrictions. */ struct drm_mode_config { struct mutex mutex; /* protects configuration (mode lists etc.) */ struct drm_modeset_lock connection_mutex; /* protects connector->encoder and encoder->crtc links */ struct drm_modeset_acquire_ctx *acquire_ctx; /* for legacy _lock_all() / _unlock_all() */ struct mutex idr_mutex; /* for IDR management */ struct idr crtc_idr; /* use this idr for all IDs, fb, crtc, connector, modes - just makes life easier */ struct idr tile_idr; /* use this idr for all IDs, fb, crtc, connector, modes - just makes life easier */ /* this is limited to one for now */ struct mutex fb_lock; /* proctects global and per-file fb lists */ int num_fb; struct list_head fb_list; int num_connector; struct list_head connector_list; int num_encoder; struct list_head encoder_list; /* * Track # of overlay planes separately from # of total planes. By * default we only advertise overlay planes to userspace; if userspace * sets the "universal plane" capability bit, we'll go ahead and * expose all planes. */ int num_overlay_plane; int num_total_plane; struct list_head plane_list; int num_crtc; struct list_head crtc_list; struct list_head property_list; int min_width, min_height; int max_width, max_height; const struct drm_mode_config_funcs *funcs; resource_size_t fb_base; /* output poll support */ bool poll_enabled; bool poll_running; bool delayed_event; struct delayed_work output_poll_work; struct mutex blob_lock; /* pointers to standard properties */ struct list_head property_blob_list; struct drm_property *edid_property; struct drm_property *dpms_property; struct drm_property *path_property; struct drm_property *tile_property; struct drm_property *plane_type_property; struct drm_property *rotation_property; struct drm_property *prop_src_x; struct drm_property *prop_src_y; struct drm_property *prop_src_w; struct drm_property *prop_src_h; struct drm_property *prop_crtc_x; struct drm_property *prop_crtc_y; struct drm_property *prop_crtc_w; struct drm_property *prop_crtc_h; struct drm_property *prop_fb_id; struct drm_property *prop_crtc_id; struct drm_property *prop_active; struct drm_property *prop_mode_id; /* DVI-I properties */ struct drm_property *dvi_i_subconnector_property; struct drm_property *dvi_i_select_subconnector_property; /* TV properties */ struct drm_property *tv_subconnector_property; struct drm_property *tv_select_subconnector_property; struct drm_property *tv_mode_property; struct drm_property *tv_left_margin_property; struct drm_property *tv_right_margin_property; struct drm_property *tv_top_margin_property; struct drm_property *tv_bottom_margin_property; struct drm_property *tv_brightness_property; struct drm_property *tv_contrast_property; struct drm_property *tv_flicker_reduction_property; struct drm_property *tv_overscan_property; struct drm_property *tv_saturation_property; struct drm_property *tv_hue_property; /* Optional properties */ struct drm_property *scaling_mode_property; struct drm_property *aspect_ratio_property; struct drm_property *dirty_info_property; /* properties for virtual machine layout */ struct drm_property *suggested_x_property; struct drm_property *suggested_y_property; /* dumb ioctl parameters */ uint32_t preferred_depth, prefer_shadow; /* whether async page flip is supported or not */ bool async_page_flip; /* whether the driver supports fb modifiers */ bool allow_fb_modifiers; /* cursor size */ uint32_t cursor_width, cursor_height; }; /** * drm_for_each_plane_mask - iterate over planes specified by bitmask * @plane: the loop cursor * @dev: the DRM device * @plane_mask: bitmask of plane indices * * Iterate over all planes specified by bitmask. */ #define drm_for_each_plane_mask(plane, dev, plane_mask) \ list_for_each_entry((plane), &(dev)->mode_config.plane_list, head) \ for_each_if ((plane_mask) & (1 << drm_plane_index(plane))) #define obj_to_crtc(x) container_of(x, struct drm_crtc, base) #define obj_to_connector(x) container_of(x, struct drm_connector, base) #define obj_to_encoder(x) container_of(x, struct drm_encoder, base) #define obj_to_mode(x) container_of(x, struct drm_display_mode, base) #define obj_to_fb(x) container_of(x, struct drm_framebuffer, base) #define obj_to_property(x) container_of(x, struct drm_property, base) #define obj_to_blob(x) container_of(x, struct drm_property_blob, base) #define obj_to_plane(x) container_of(x, struct drm_plane, base) struct drm_prop_enum_list { int type; char *name; }; extern __printf(6, 7) int drm_crtc_init_with_planes(struct drm_device *dev, struct drm_crtc *crtc, struct drm_plane *primary, struct drm_plane *cursor, const struct drm_crtc_funcs *funcs, const char *name, ...); extern void drm_crtc_cleanup(struct drm_crtc *crtc); extern unsigned int drm_crtc_index(struct drm_crtc *crtc); /** * drm_crtc_mask - find the mask of a registered CRTC * @crtc: CRTC to find mask for * * Given a registered CRTC, return the mask bit of that CRTC for an * encoder's possible_crtcs field. */ static inline uint32_t drm_crtc_mask(struct drm_crtc *crtc) { return 1 << drm_crtc_index(crtc); } extern void drm_connector_ida_init(void); extern void drm_connector_ida_destroy(void); extern int drm_connector_init(struct drm_device *dev, struct drm_connector *connector, const struct drm_connector_funcs *funcs, int connector_type); int drm_connector_register(struct drm_connector *connector); void drm_connector_unregister(struct drm_connector *connector); extern void drm_connector_cleanup(struct drm_connector *connector); extern unsigned int drm_connector_index(struct drm_connector *connector); /* helper to unplug all connectors from sysfs for device */ extern void drm_connector_unplug_all(struct drm_device *dev); extern int drm_bridge_add(struct drm_bridge *bridge); extern void drm_bridge_remove(struct drm_bridge *bridge); extern struct drm_bridge *of_drm_find_bridge(struct device_node *np); extern int drm_bridge_attach(struct drm_device *dev, struct drm_bridge *bridge); bool drm_bridge_mode_fixup(struct drm_bridge *bridge, const struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode); void drm_bridge_disable(struct drm_bridge *bridge); void drm_bridge_post_disable(struct drm_bridge *bridge); void drm_bridge_mode_set(struct drm_bridge *bridge, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode); void drm_bridge_pre_enable(struct drm_bridge *bridge); void drm_bridge_enable(struct drm_bridge *bridge); extern __printf(5, 6) int drm_encoder_init(struct drm_device *dev, struct drm_encoder *encoder, const struct drm_encoder_funcs *funcs, int encoder_type, const char *name, ...); /** * drm_encoder_crtc_ok - can a given crtc drive a given encoder? * @encoder: encoder to test * @crtc: crtc to test * * Return false if @encoder can't be driven by @crtc, true otherwise. */ static inline bool drm_encoder_crtc_ok(struct drm_encoder *encoder, struct drm_crtc *crtc) { return !!(encoder->possible_crtcs & drm_crtc_mask(crtc)); } extern __printf(8, 9) int drm_universal_plane_init(struct drm_device *dev, struct drm_plane *plane, unsigned long possible_crtcs, const struct drm_plane_funcs *funcs, const uint32_t *formats, unsigned int format_count, enum drm_plane_type type, const char *name, ...); extern int drm_plane_init(struct drm_device *dev, struct drm_plane *plane, unsigned long possible_crtcs, const struct drm_plane_funcs *funcs, const uint32_t *formats, unsigned int format_count, bool is_primary); extern void drm_plane_cleanup(struct drm_plane *plane); extern unsigned int drm_plane_index(struct drm_plane *plane); extern struct drm_plane * drm_plane_from_index(struct drm_device *dev, int idx); extern void drm_plane_force_disable(struct drm_plane *plane); extern int drm_plane_check_pixel_format(const struct drm_plane *plane, u32 format); extern void drm_crtc_get_hv_timing(const struct drm_display_mode *mode, int *hdisplay, int *vdisplay); extern int drm_crtc_check_viewport(const struct drm_crtc *crtc, int x, int y, const struct drm_display_mode *mode, const struct drm_framebuffer *fb); extern void drm_encoder_cleanup(struct drm_encoder *encoder); extern const char *drm_get_connector_status_name(enum drm_connector_status status); extern const char *drm_get_subpixel_order_name(enum subpixel_order order); extern const char *drm_get_dpms_name(int val); extern const char *drm_get_dvi_i_subconnector_name(int val); extern const char *drm_get_dvi_i_select_name(int val); extern const char *drm_get_tv_subconnector_name(int val); extern const char *drm_get_tv_select_name(int val); extern void drm_fb_release(struct drm_file *file_priv); extern void drm_property_destroy_user_blobs(struct drm_device *dev, struct drm_file *file_priv); extern bool drm_probe_ddc(struct i2c_adapter *adapter); extern struct edid *drm_get_edid(struct drm_connector *connector, struct i2c_adapter *adapter); extern struct edid *drm_edid_duplicate(const struct edid *edid); extern int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid); extern void drm_mode_config_init(struct drm_device *dev); extern void drm_mode_config_reset(struct drm_device *dev); extern void drm_mode_config_cleanup(struct drm_device *dev); extern int drm_mode_connector_set_path_property(struct drm_connector *connector, const char *path); int drm_mode_connector_set_tile_property(struct drm_connector *connector); extern int drm_mode_connector_update_edid_property(struct drm_connector *connector, const struct edid *edid); extern int drm_display_info_set_bus_formats(struct drm_display_info *info, const u32 *formats, unsigned int num_formats); static inline bool drm_property_type_is(struct drm_property *property, uint32_t type) { /* instanceof for props.. handles extended type vs original types: */ if (property->flags & DRM_MODE_PROP_EXTENDED_TYPE) return (property->flags & DRM_MODE_PROP_EXTENDED_TYPE) == type; return property->flags & type; } static inline bool drm_property_type_valid(struct drm_property *property) { if (property->flags & DRM_MODE_PROP_EXTENDED_TYPE) return !(property->flags & DRM_MODE_PROP_LEGACY_TYPE); return !!(property->flags & DRM_MODE_PROP_LEGACY_TYPE); } extern int drm_object_property_set_value(struct drm_mode_object *obj, struct drm_property *property, uint64_t val); extern int drm_object_property_get_value(struct drm_mode_object *obj, struct drm_property *property, uint64_t *value); extern int drm_framebuffer_init(struct drm_device *dev, struct drm_framebuffer *fb, const struct drm_framebuffer_funcs *funcs); extern struct drm_framebuffer *drm_framebuffer_lookup(struct drm_device *dev, uint32_t id); extern void drm_framebuffer_unreference(struct drm_framebuffer *fb); extern void drm_framebuffer_reference(struct drm_framebuffer *fb); extern void drm_framebuffer_remove(struct drm_framebuffer *fb); extern void drm_framebuffer_cleanup(struct drm_framebuffer *fb); extern void drm_framebuffer_unregister_private(struct drm_framebuffer *fb); extern void drm_object_attach_property(struct drm_mode_object *obj, struct drm_property *property, uint64_t init_val); extern struct drm_property *drm_property_create(struct drm_device *dev, int flags, const char *name, int num_values); extern struct drm_property *drm_property_create_enum(struct drm_device *dev, int flags, const char *name, const struct drm_prop_enum_list *props, int num_values); struct drm_property *drm_property_create_bitmask(struct drm_device *dev, int flags, const char *name, const struct drm_prop_enum_list *props, int num_props, uint64_t supported_bits); struct drm_property *drm_property_create_range(struct drm_device *dev, int flags, const char *name, uint64_t min, uint64_t max); struct drm_property *drm_property_create_signed_range(struct drm_device *dev, int flags, const char *name, int64_t min, int64_t max); struct drm_property *drm_property_create_object(struct drm_device *dev, int flags, const char *name, uint32_t type); struct drm_property *drm_property_create_bool(struct drm_device *dev, int flags, const char *name); struct drm_property_blob *drm_property_create_blob(struct drm_device *dev, size_t length, const void *data); struct drm_property_blob *drm_property_lookup_blob(struct drm_device *dev, uint32_t id); struct drm_property_blob *drm_property_reference_blob(struct drm_property_blob *blob); void drm_property_unreference_blob(struct drm_property_blob *blob); extern void drm_property_destroy(struct drm_device *dev, struct drm_property *property); extern int drm_property_add_enum(struct drm_property *property, int index, uint64_t value, const char *name); extern int drm_mode_create_dvi_i_properties(struct drm_device *dev); extern int drm_mode_create_tv_properties(struct drm_device *dev, unsigned int num_modes, const char * const modes[]); extern int drm_mode_create_scaling_mode_property(struct drm_device *dev); extern int drm_mode_create_aspect_ratio_property(struct drm_device *dev); extern int drm_mode_create_dirty_info_property(struct drm_device *dev); extern int drm_mode_create_suggested_offset_properties(struct drm_device *dev); extern bool drm_property_change_valid_get(struct drm_property *property, uint64_t value, struct drm_mode_object **ref); extern void drm_property_change_valid_put(struct drm_property *property, struct drm_mode_object *ref); extern int drm_mode_connector_attach_encoder(struct drm_connector *connector, struct drm_encoder *encoder); extern int drm_mode_crtc_set_gamma_size(struct drm_crtc *crtc, int gamma_size); extern struct drm_mode_object *drm_mode_object_find(struct drm_device *dev, uint32_t id, uint32_t type); /* IOCTLs */ extern int drm_mode_getresources(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int drm_mode_getplane_res(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int drm_mode_getcrtc(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int drm_mode_getconnector(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int drm_mode_set_config_internal(struct drm_mode_set *set); extern int drm_mode_setcrtc(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int drm_mode_getplane(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int drm_mode_setplane(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int drm_mode_cursor_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int drm_mode_cursor2_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int drm_mode_addfb(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int drm_mode_addfb2(struct drm_device *dev, void *data, struct drm_file *file_priv); extern uint32_t drm_mode_legacy_fb_format(uint32_t bpp, uint32_t depth); extern int drm_mode_rmfb(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int drm_mode_getfb(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int drm_mode_dirtyfb_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int drm_mode_getproperty_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int drm_mode_getblob_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int drm_mode_createblob_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int drm_mode_destroyblob_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int drm_mode_connector_property_set_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int drm_mode_getencoder(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int drm_mode_gamma_get_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int drm_mode_gamma_set_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); extern u8 drm_match_cea_mode(const struct drm_display_mode *to_match); extern enum hdmi_picture_aspect drm_get_cea_aspect_ratio(const u8 video_code); extern bool drm_detect_hdmi_monitor(struct edid *edid); extern bool drm_detect_monitor_audio(struct edid *edid); extern bool drm_rgb_quant_range_selectable(struct edid *edid); extern int drm_mode_page_flip_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int drm_add_modes_noedid(struct drm_connector *connector, int hdisplay, int vdisplay); extern void drm_set_preferred_mode(struct drm_connector *connector, int hpref, int vpref); extern int drm_edid_header_is_valid(const u8 *raw_edid); extern bool drm_edid_block_valid(u8 *raw_edid, int block, bool print_bad_edid, bool *edid_corrupt); extern bool drm_edid_is_valid(struct edid *edid); extern struct drm_tile_group *drm_mode_create_tile_group(struct drm_device *dev, char topology[8]); extern struct drm_tile_group *drm_mode_get_tile_group(struct drm_device *dev, char topology[8]); extern void drm_mode_put_tile_group(struct drm_device *dev, struct drm_tile_group *tg); struct drm_display_mode *drm_mode_find_dmt(struct drm_device *dev, int hsize, int vsize, int fresh, bool rb); extern int drm_mode_create_dumb_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int drm_mode_mmap_dumb_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int drm_mode_destroy_dumb_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int drm_mode_obj_get_properties_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int drm_mode_obj_set_property_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int drm_mode_plane_set_obj_prop(struct drm_plane *plane, struct drm_property *property, uint64_t value); extern int drm_mode_atomic_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); extern void drm_fb_get_bpp_depth(uint32_t format, unsigned int *depth, int *bpp); extern int drm_format_num_planes(uint32_t format); extern int drm_format_plane_cpp(uint32_t format, int plane); extern int drm_format_horz_chroma_subsampling(uint32_t format); extern int drm_format_vert_chroma_subsampling(uint32_t format); extern const char *drm_get_format_name(uint32_t format); extern struct drm_property *drm_mode_create_rotation_property(struct drm_device *dev, unsigned int supported_rotations); extern unsigned int drm_rotation_simplify(unsigned int rotation, unsigned int supported_rotations); /* Helpers */ static inline struct drm_plane *drm_plane_find(struct drm_device *dev, uint32_t id) { struct drm_mode_object *mo; mo = drm_mode_object_find(dev, id, DRM_MODE_OBJECT_PLANE); return mo ? obj_to_plane(mo) : NULL; } static inline struct drm_crtc *drm_crtc_find(struct drm_device *dev, uint32_t id) { struct drm_mode_object *mo; mo = drm_mode_object_find(dev, id, DRM_MODE_OBJECT_CRTC); return mo ? obj_to_crtc(mo) : NULL; } static inline struct drm_encoder *drm_encoder_find(struct drm_device *dev, uint32_t id) { struct drm_mode_object *mo; mo = drm_mode_object_find(dev, id, DRM_MODE_OBJECT_ENCODER); return mo ? obj_to_encoder(mo) : NULL; } static inline struct drm_connector *drm_connector_find(struct drm_device *dev, uint32_t id) { struct drm_mode_object *mo; mo = drm_mode_object_find(dev, id, DRM_MODE_OBJECT_CONNECTOR); return mo ? obj_to_connector(mo) : NULL; } static inline struct drm_property *drm_property_find(struct drm_device *dev, uint32_t id) { struct drm_mode_object *mo; mo = drm_mode_object_find(dev, id, DRM_MODE_OBJECT_PROPERTY); return mo ? obj_to_property(mo) : NULL; } /* Plane list iterator for legacy (overlay only) planes. */ #define drm_for_each_legacy_plane(plane, dev) \ list_for_each_entry(plane, &(dev)->mode_config.plane_list, head) \ for_each_if (plane->type == DRM_PLANE_TYPE_OVERLAY) #define drm_for_each_plane(plane, dev) \ list_for_each_entry(plane, &(dev)->mode_config.plane_list, head) #define drm_for_each_crtc(crtc, dev) \ list_for_each_entry(crtc, &(dev)->mode_config.crtc_list, head) static inline void assert_drm_connector_list_read_locked(struct drm_mode_config *mode_config) { /* * The connector hotadd/remove code currently grabs both locks when * updating lists. Hence readers need only hold either of them to be * safe and the check amounts to * * WARN_ON(not_holding(A) && not_holding(B)). */ WARN_ON(!mutex_is_locked(&mode_config->mutex) && !drm_modeset_is_locked(&mode_config->connection_mutex)); } #define drm_for_each_connector(connector, dev) \ for (assert_drm_connector_list_read_locked(&(dev)->mode_config), \ connector = list_first_entry(&(dev)->mode_config.connector_list, \ struct drm_connector, head); \ &connector->head != (&(dev)->mode_config.connector_list); \ connector = list_next_entry(connector, head)) #define drm_for_each_encoder(encoder, dev) \ list_for_each_entry(encoder, &(dev)->mode_config.encoder_list, head) #define drm_for_each_fb(fb, dev) \ for (WARN_ON(!mutex_is_locked(&(dev)->mode_config.fb_lock)), \ fb = list_first_entry(&(dev)->mode_config.fb_list, \ struct drm_framebuffer, head); \ &fb->head != (&(dev)->mode_config.fb_list); \ fb = list_next_entry(fb, head)) #endif /* __DRM_CRTC_H__ */