/* * Fintek F81232 USB to serial adaptor driver * * Copyright (C) 2012 Greg Kroah-Hartman (gregkh@linuxfoundation.org) * Copyright (C) 2012 Linux Foundation * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published by * the Free Software Foundation. * */ #include <linux/kernel.h> #include <linux/errno.h> #include <linux/slab.h> #include <linux/tty.h> #include <linux/tty_driver.h> #include <linux/tty_flip.h> #include <linux/serial.h> #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/mutex.h> #include <linux/uaccess.h> #include <linux/usb.h> #include <linux/usb/serial.h> #include <linux/serial_reg.h> static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1934, 0x0706) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, id_table); /* Maximum baudrate for F81232 */ #define F81232_MAX_BAUDRATE 115200 /* USB Control EP parameter */ #define F81232_REGISTER_REQUEST 0xa0 #define F81232_GET_REGISTER 0xc0 #define F81232_SET_REGISTER 0x40 #define SERIAL_BASE_ADDRESS 0x0120 #define RECEIVE_BUFFER_REGISTER (0x00 + SERIAL_BASE_ADDRESS) #define INTERRUPT_ENABLE_REGISTER (0x01 + SERIAL_BASE_ADDRESS) #define FIFO_CONTROL_REGISTER (0x02 + SERIAL_BASE_ADDRESS) #define LINE_CONTROL_REGISTER (0x03 + SERIAL_BASE_ADDRESS) #define MODEM_CONTROL_REGISTER (0x04 + SERIAL_BASE_ADDRESS) #define MODEM_STATUS_REGISTER (0x06 + SERIAL_BASE_ADDRESS) struct f81232_private { struct mutex lock; u8 modem_control; u8 modem_status; struct work_struct interrupt_work; struct usb_serial_port *port; }; static int calc_baud_divisor(speed_t baudrate) { return DIV_ROUND_CLOSEST(F81232_MAX_BAUDRATE, baudrate); } static int f81232_get_register(struct usb_serial_port *port, u16 reg, u8 *val) { int status; u8 *tmp; struct usb_device *dev = port->serial->dev; tmp = kmalloc(sizeof(*val), GFP_KERNEL); if (!tmp) return -ENOMEM; status = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), F81232_REGISTER_REQUEST, F81232_GET_REGISTER, reg, 0, tmp, sizeof(*val), USB_CTRL_GET_TIMEOUT); if (status != sizeof(*val)) { dev_err(&port->dev, "%s failed status: %d\n", __func__, status); if (status < 0) status = usb_translate_errors(status); else status = -EIO; } else { status = 0; *val = *tmp; } kfree(tmp); return status; } static int f81232_set_register(struct usb_serial_port *port, u16 reg, u8 val) { int status; u8 *tmp; struct usb_device *dev = port->serial->dev; tmp = kmalloc(sizeof(val), GFP_KERNEL); if (!tmp) return -ENOMEM; *tmp = val; status = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), F81232_REGISTER_REQUEST, F81232_SET_REGISTER, reg, 0, tmp, sizeof(val), USB_CTRL_SET_TIMEOUT); if (status != sizeof(val)) { dev_err(&port->dev, "%s failed status: %d\n", __func__, status); if (status < 0) status = usb_translate_errors(status); else status = -EIO; } else { status = 0; } kfree(tmp); return status; } static void f81232_read_msr(struct usb_serial_port *port) { int status; u8 current_msr; struct tty_struct *tty; struct f81232_private *priv = usb_get_serial_port_data(port); mutex_lock(&priv->lock); status = f81232_get_register(port, MODEM_STATUS_REGISTER, ¤t_msr); if (status) { dev_err(&port->dev, "%s fail, status: %d\n", __func__, status); mutex_unlock(&priv->lock); return; } if (!(current_msr & UART_MSR_ANY_DELTA)) { mutex_unlock(&priv->lock); return; } priv->modem_status = current_msr; if (current_msr & UART_MSR_DCTS) port->icount.cts++; if (current_msr & UART_MSR_DDSR) port->icount.dsr++; if (current_msr & UART_MSR_TERI) port->icount.rng++; if (current_msr & UART_MSR_DDCD) { port->icount.dcd++; tty = tty_port_tty_get(&port->port); if (tty) { usb_serial_handle_dcd_change(port, tty, current_msr & UART_MSR_DCD); tty_kref_put(tty); } } wake_up_interruptible(&port->port.delta_msr_wait); mutex_unlock(&priv->lock); } static int f81232_set_mctrl(struct usb_serial_port *port, unsigned int set, unsigned int clear) { u8 val; int status; struct f81232_private *priv = usb_get_serial_port_data(port); if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) return 0; /* no change */ /* 'set' takes precedence over 'clear' */ clear &= ~set; /* force enable interrupt with OUT2 */ mutex_lock(&priv->lock); val = UART_MCR_OUT2 | priv->modem_control; if (clear & TIOCM_DTR) val &= ~UART_MCR_DTR; if (clear & TIOCM_RTS) val &= ~UART_MCR_RTS; if (set & TIOCM_DTR) val |= UART_MCR_DTR; if (set & TIOCM_RTS) val |= UART_MCR_RTS; dev_dbg(&port->dev, "%s new:%02x old:%02x\n", __func__, val, priv->modem_control); status = f81232_set_register(port, MODEM_CONTROL_REGISTER, val); if (status) { dev_err(&port->dev, "%s set MCR status < 0\n", __func__); mutex_unlock(&priv->lock); return status; } priv->modem_control = val; mutex_unlock(&priv->lock); return 0; } static void f81232_update_line_status(struct usb_serial_port *port, unsigned char *data, size_t actual_length) { struct f81232_private *priv = usb_get_serial_port_data(port); if (!actual_length) return; switch (data[0] & 0x07) { case 0x00: /* msr change */ dev_dbg(&port->dev, "IIR: MSR Change: %02x\n", data[0]); schedule_work(&priv->interrupt_work); break; case 0x02: /* tx-empty */ break; case 0x04: /* rx data available */ break; case 0x06: /* lsr change */ /* we can forget it. the LSR will read from bulk-in */ dev_dbg(&port->dev, "IIR: LSR Change: %02x\n", data[0]); break; } } static void f81232_read_int_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; unsigned char *data = urb->transfer_buffer; unsigned int actual_length = urb->actual_length; int status = urb->status; int retval; switch (status) { case 0: /* success */ break; case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n", __func__, status); return; default: dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n", __func__, status); goto exit; } usb_serial_debug_data(&port->dev, __func__, urb->actual_length, urb->transfer_buffer); f81232_update_line_status(port, data, actual_length); exit: retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) dev_err(&urb->dev->dev, "%s - usb_submit_urb failed with result %d\n", __func__, retval); } static void f81232_process_read_urb(struct urb *urb) { struct usb_serial_port *port = urb->context; unsigned char *data = urb->transfer_buffer; char tty_flag; unsigned int i; u8 lsr; /* * When opening the port we get a 1-byte packet with the current LSR, * which we discard. */ if ((urb->actual_length < 2) || (urb->actual_length % 2)) return; /* bulk-in data: [LSR(1Byte)+DATA(1Byte)][LSR(1Byte)+DATA(1Byte)]... */ for (i = 0; i < urb->actual_length; i += 2) { tty_flag = TTY_NORMAL; lsr = data[i]; if (lsr & UART_LSR_BRK_ERROR_BITS) { if (lsr & UART_LSR_BI) { tty_flag = TTY_BREAK; port->icount.brk++; usb_serial_handle_break(port); } else if (lsr & UART_LSR_PE) { tty_flag = TTY_PARITY; port->icount.parity++; } else if (lsr & UART_LSR_FE) { tty_flag = TTY_FRAME; port->icount.frame++; } if (lsr & UART_LSR_OE) { port->icount.overrun++; tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); } } if (port->port.console && port->sysrq) { if (usb_serial_handle_sysrq_char(port, data[i + 1])) continue; } tty_insert_flip_char(&port->port, data[i + 1], tty_flag); } tty_flip_buffer_push(&port->port); } static void f81232_break_ctl(struct tty_struct *tty, int break_state) { /* FIXME - Stubbed out for now */ /* * break_state = -1 to turn on break, and 0 to turn off break * see drivers/char/tty_io.c to see it used. * last_set_data_urb_value NEVER has the break bit set in it. */ } static void f81232_set_baudrate(struct usb_serial_port *port, speed_t baudrate) { u8 lcr; int divisor; int status = 0; divisor = calc_baud_divisor(baudrate); status = f81232_get_register(port, LINE_CONTROL_REGISTER, &lcr); /* get LCR */ if (status) { dev_err(&port->dev, "%s failed to get LCR: %d\n", __func__, status); return; } status = f81232_set_register(port, LINE_CONTROL_REGISTER, lcr | UART_LCR_DLAB); /* Enable DLAB */ if (status) { dev_err(&port->dev, "%s failed to set DLAB: %d\n", __func__, status); return; } status = f81232_set_register(port, RECEIVE_BUFFER_REGISTER, divisor & 0x00ff); /* low */ if (status) { dev_err(&port->dev, "%s failed to set baudrate MSB: %d\n", __func__, status); goto reapply_lcr; } status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER, (divisor & 0xff00) >> 8); /* high */ if (status) { dev_err(&port->dev, "%s failed to set baudrate LSB: %d\n", __func__, status); } reapply_lcr: status = f81232_set_register(port, LINE_CONTROL_REGISTER, lcr & ~UART_LCR_DLAB); if (status) { dev_err(&port->dev, "%s failed to set DLAB: %d\n", __func__, status); } } static int f81232_port_enable(struct usb_serial_port *port) { u8 val; int status; /* fifo on, trigger8, clear TX/RX*/ val = UART_FCR_TRIGGER_8 | UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT; status = f81232_set_register(port, FIFO_CONTROL_REGISTER, val); if (status) { dev_err(&port->dev, "%s failed to set FCR: %d\n", __func__, status); return status; } /* MSR Interrupt only, LSR will read from Bulk-in odd byte */ status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER, UART_IER_MSI); if (status) { dev_err(&port->dev, "%s failed to set IER: %d\n", __func__, status); return status; } return 0; } static int f81232_port_disable(struct usb_serial_port *port) { int status; status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER, 0); if (status) { dev_err(&port->dev, "%s failed to set IER: %d\n", __func__, status); return status; } return 0; } static void f81232_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { u8 new_lcr = 0; int status = 0; speed_t baudrate; /* Don't change anything if nothing has changed */ if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios)) return; if (C_BAUD(tty) == B0) f81232_set_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS); else if (old_termios && (old_termios->c_cflag & CBAUD) == B0) f81232_set_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0); baudrate = tty_get_baud_rate(tty); if (baudrate > 0) { if (baudrate > F81232_MAX_BAUDRATE) { baudrate = F81232_MAX_BAUDRATE; tty_encode_baud_rate(tty, baudrate, baudrate); } f81232_set_baudrate(port, baudrate); } if (C_PARENB(tty)) { new_lcr |= UART_LCR_PARITY; if (!C_PARODD(tty)) new_lcr |= UART_LCR_EPAR; if (C_CMSPAR(tty)) new_lcr |= UART_LCR_SPAR; } if (C_CSTOPB(tty)) new_lcr |= UART_LCR_STOP; switch (C_CSIZE(tty)) { case CS5: new_lcr |= UART_LCR_WLEN5; break; case CS6: new_lcr |= UART_LCR_WLEN6; break; case CS7: new_lcr |= UART_LCR_WLEN7; break; default: case CS8: new_lcr |= UART_LCR_WLEN8; break; } status = f81232_set_register(port, LINE_CONTROL_REGISTER, new_lcr); if (status) { dev_err(&port->dev, "%s failed to set LCR: %d\n", __func__, status); } } static int f81232_tiocmget(struct tty_struct *tty) { int r; struct usb_serial_port *port = tty->driver_data; struct f81232_private *port_priv = usb_get_serial_port_data(port); u8 mcr, msr; /* force get current MSR changed state */ f81232_read_msr(port); mutex_lock(&port_priv->lock); mcr = port_priv->modem_control; msr = port_priv->modem_status; mutex_unlock(&port_priv->lock); r = (mcr & UART_MCR_DTR ? TIOCM_DTR : 0) | (mcr & UART_MCR_RTS ? TIOCM_RTS : 0) | (msr & UART_MSR_CTS ? TIOCM_CTS : 0) | (msr & UART_MSR_DCD ? TIOCM_CAR : 0) | (msr & UART_MSR_RI ? TIOCM_RI : 0) | (msr & UART_MSR_DSR ? TIOCM_DSR : 0); return r; } static int f81232_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; return f81232_set_mctrl(port, set, clear); } static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port) { int result; result = f81232_port_enable(port); if (result) return result; /* Setup termios */ if (tty) f81232_set_termios(tty, port, NULL); result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (result) { dev_err(&port->dev, "%s - failed submitting interrupt urb," " error %d\n", __func__, result); return result; } result = usb_serial_generic_open(tty, port); if (result) { usb_kill_urb(port->interrupt_in_urb); return result; } return 0; } static void f81232_close(struct usb_serial_port *port) { f81232_port_disable(port); usb_serial_generic_close(port); usb_kill_urb(port->interrupt_in_urb); } static void f81232_dtr_rts(struct usb_serial_port *port, int on) { if (on) f81232_set_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0); else f81232_set_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS); } static int f81232_carrier_raised(struct usb_serial_port *port) { u8 msr; struct f81232_private *priv = usb_get_serial_port_data(port); mutex_lock(&priv->lock); msr = priv->modem_status; mutex_unlock(&priv->lock); if (msr & UART_MSR_DCD) return 1; return 0; } static int f81232_get_serial_info(struct usb_serial_port *port, unsigned long arg) { struct serial_struct ser; memset(&ser, 0, sizeof(ser)); ser.type = PORT_16550A; ser.line = port->minor; ser.port = port->port_number; ser.baud_base = F81232_MAX_BAUDRATE; if (copy_to_user((void __user *)arg, &ser, sizeof(ser))) return -EFAULT; return 0; } static int f81232_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; switch (cmd) { case TIOCGSERIAL: return f81232_get_serial_info(port, arg); default: break; } return -ENOIOCTLCMD; } static void f81232_interrupt_work(struct work_struct *work) { struct f81232_private *priv = container_of(work, struct f81232_private, interrupt_work); f81232_read_msr(priv->port); } static int f81232_port_probe(struct usb_serial_port *port) { struct f81232_private *priv; priv = kzalloc(sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; mutex_init(&priv->lock); INIT_WORK(&priv->interrupt_work, f81232_interrupt_work); usb_set_serial_port_data(port, priv); port->port.drain_delay = 256; priv->port = port; return 0; } static int f81232_port_remove(struct usb_serial_port *port) { struct f81232_private *priv; priv = usb_get_serial_port_data(port); kfree(priv); return 0; } static struct usb_serial_driver f81232_device = { .driver = { .owner = THIS_MODULE, .name = "f81232", }, .id_table = id_table, .num_ports = 1, .bulk_in_size = 256, .bulk_out_size = 256, .open = f81232_open, .close = f81232_close, .dtr_rts = f81232_dtr_rts, .carrier_raised = f81232_carrier_raised, .ioctl = f81232_ioctl, .break_ctl = f81232_break_ctl, .set_termios = f81232_set_termios, .tiocmget = f81232_tiocmget, .tiocmset = f81232_tiocmset, .tiocmiwait = usb_serial_generic_tiocmiwait, .process_read_urb = f81232_process_read_urb, .read_int_callback = f81232_read_int_callback, .port_probe = f81232_port_probe, .port_remove = f81232_port_remove, }; static struct usb_serial_driver * const serial_drivers[] = { &f81232_device, NULL, }; module_usb_serial_driver(serial_drivers, id_table); MODULE_DESCRIPTION("Fintek F81232 USB to serial adaptor driver"); MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@linuxfoundation.org>"); MODULE_AUTHOR("Peter Hong <peter_hong@fintek.com.tw>"); MODULE_LICENSE("GPL v2");