/* * core.c - ChipIdea USB IP core family device controller * * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved. * * Author: David Lopo * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ /* * Description: ChipIdea USB IP core family device controller * * This driver is composed of several blocks: * - HW: hardware interface * - DBG: debug facilities (optional) * - UTIL: utilities * - ISR: interrupts handling * - ENDPT: endpoint operations (Gadget API) * - GADGET: gadget operations (Gadget API) * - BUS: bus glue code, bus abstraction layer * * Compile Options * - CONFIG_USB_CHIPIDEA_DEBUG: enable debug facilities * - STALL_IN: non-empty bulk-in pipes cannot be halted * if defined mass storage compliance succeeds but with warnings * => case 4: Hi > Dn * => case 5: Hi > Di * => case 8: Hi <> Do * if undefined usbtest 13 fails * - TRACE: enable function tracing (depends on DEBUG) * * Main Features * - Chapter 9 & Mass Storage Compliance with Gadget File Storage * - Chapter 9 Compliance with Gadget Zero (STALL_IN undefined) * - Normal & LPM support * * USBTEST Report * - OK: 0-12, 13 (STALL_IN defined) & 14 * - Not Supported: 15 & 16 (ISO) * * TODO List * - Suspend & Remote Wakeup */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "ci.h" #include "udc.h" #include "bits.h" #include "host.h" #include "debug.h" #include "otg.h" #include "otg_fsm.h" /* Controller register map */ static const u8 ci_regs_nolpm[] = { [CAP_CAPLENGTH] = 0x00U, [CAP_HCCPARAMS] = 0x08U, [CAP_DCCPARAMS] = 0x24U, [CAP_TESTMODE] = 0x38U, [OP_USBCMD] = 0x00U, [OP_USBSTS] = 0x04U, [OP_USBINTR] = 0x08U, [OP_DEVICEADDR] = 0x14U, [OP_ENDPTLISTADDR] = 0x18U, [OP_PORTSC] = 0x44U, [OP_DEVLC] = 0x84U, [OP_OTGSC] = 0x64U, [OP_USBMODE] = 0x68U, [OP_ENDPTSETUPSTAT] = 0x6CU, [OP_ENDPTPRIME] = 0x70U, [OP_ENDPTFLUSH] = 0x74U, [OP_ENDPTSTAT] = 0x78U, [OP_ENDPTCOMPLETE] = 0x7CU, [OP_ENDPTCTRL] = 0x80U, }; static const u8 ci_regs_lpm[] = { [CAP_CAPLENGTH] = 0x00U, [CAP_HCCPARAMS] = 0x08U, [CAP_DCCPARAMS] = 0x24U, [CAP_TESTMODE] = 0xFCU, [OP_USBCMD] = 0x00U, [OP_USBSTS] = 0x04U, [OP_USBINTR] = 0x08U, [OP_DEVICEADDR] = 0x14U, [OP_ENDPTLISTADDR] = 0x18U, [OP_PORTSC] = 0x44U, [OP_DEVLC] = 0x84U, [OP_OTGSC] = 0xC4U, [OP_USBMODE] = 0xC8U, [OP_ENDPTSETUPSTAT] = 0xD8U, [OP_ENDPTPRIME] = 0xDCU, [OP_ENDPTFLUSH] = 0xE0U, [OP_ENDPTSTAT] = 0xE4U, [OP_ENDPTCOMPLETE] = 0xE8U, [OP_ENDPTCTRL] = 0xECU, }; static int hw_alloc_regmap(struct ci_hdrc *ci, bool is_lpm) { int i; for (i = 0; i < OP_ENDPTCTRL; i++) ci->hw_bank.regmap[i] = (i <= CAP_LAST ? ci->hw_bank.cap : ci->hw_bank.op) + (is_lpm ? ci_regs_lpm[i] : ci_regs_nolpm[i]); for (; i <= OP_LAST; i++) ci->hw_bank.regmap[i] = ci->hw_bank.op + 4 * (i - OP_ENDPTCTRL) + (is_lpm ? ci_regs_lpm[OP_ENDPTCTRL] : ci_regs_nolpm[OP_ENDPTCTRL]); return 0; } static enum ci_revision ci_get_revision(struct ci_hdrc *ci) { int ver = hw_read_id_reg(ci, ID_ID, VERSION) >> __ffs(VERSION); enum ci_revision rev = CI_REVISION_UNKNOWN; if (ver == 0x2) { rev = hw_read_id_reg(ci, ID_ID, REVISION) >> __ffs(REVISION); rev += CI_REVISION_20; } else if (ver == 0x0) { rev = CI_REVISION_1X; } return rev; } /** * hw_read_intr_enable: returns interrupt enable register * * @ci: the controller * * This function returns register data */ u32 hw_read_intr_enable(struct ci_hdrc *ci) { return hw_read(ci, OP_USBINTR, ~0); } /** * hw_read_intr_status: returns interrupt status register * * @ci: the controller * * This function returns register data */ u32 hw_read_intr_status(struct ci_hdrc *ci) { return hw_read(ci, OP_USBSTS, ~0); } /** * hw_port_test_set: writes port test mode (execute without interruption) * @mode: new value * * This function returns an error code */ int hw_port_test_set(struct ci_hdrc *ci, u8 mode) { const u8 TEST_MODE_MAX = 7; if (mode > TEST_MODE_MAX) return -EINVAL; hw_write(ci, OP_PORTSC, PORTSC_PTC, mode << __ffs(PORTSC_PTC)); return 0; } /** * hw_port_test_get: reads port test mode value * * @ci: the controller * * This function returns port test mode value */ u8 hw_port_test_get(struct ci_hdrc *ci) { return hw_read(ci, OP_PORTSC, PORTSC_PTC) >> __ffs(PORTSC_PTC); } static void hw_wait_phy_stable(void) { /* * The phy needs some delay to output the stable status from low * power mode. And for OTGSC, the status inputs are debounced * using a 1 ms time constant, so, delay 2ms for controller to get * the stable status, like vbus and id when the phy leaves low power. */ usleep_range(2000, 2500); } /* The PHY enters/leaves low power mode */ static void ci_hdrc_enter_lpm(struct ci_hdrc *ci, bool enable) { enum ci_hw_regs reg = ci->hw_bank.lpm ? OP_DEVLC : OP_PORTSC; bool lpm = !!(hw_read(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm))); if (enable && !lpm) hw_write(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm), PORTSC_PHCD(ci->hw_bank.lpm)); else if (!enable && lpm) hw_write(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm), 0); } static int hw_device_init(struct ci_hdrc *ci, void __iomem *base) { u32 reg; /* bank is a module variable */ ci->hw_bank.abs = base; ci->hw_bank.cap = ci->hw_bank.abs; ci->hw_bank.cap += ci->platdata->capoffset; ci->hw_bank.op = ci->hw_bank.cap + (ioread32(ci->hw_bank.cap) & 0xff); hw_alloc_regmap(ci, false); reg = hw_read(ci, CAP_HCCPARAMS, HCCPARAMS_LEN) >> __ffs(HCCPARAMS_LEN); ci->hw_bank.lpm = reg; if (reg) hw_alloc_regmap(ci, !!reg); ci->hw_bank.size = ci->hw_bank.op - ci->hw_bank.abs; ci->hw_bank.size += OP_LAST; ci->hw_bank.size /= sizeof(u32); reg = hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DEN) >> __ffs(DCCPARAMS_DEN); ci->hw_ep_max = reg * 2; /* cache hw ENDPT_MAX */ if (ci->hw_ep_max > ENDPT_MAX) return -ENODEV; ci_hdrc_enter_lpm(ci, false); /* Disable all interrupts bits */ hw_write(ci, OP_USBINTR, 0xffffffff, 0); /* Clear all interrupts status bits*/ hw_write(ci, OP_USBSTS, 0xffffffff, 0xffffffff); ci->rev = ci_get_revision(ci); dev_dbg(ci->dev, "ChipIdea HDRC found, revision: %d, lpm: %d; cap: %p op: %p\n", ci->rev, ci->hw_bank.lpm, ci->hw_bank.cap, ci->hw_bank.op); /* setup lock mode ? */ /* ENDPTSETUPSTAT is '0' by default */ /* HCSPARAMS.bf.ppc SHOULD BE zero for device */ return 0; } static void hw_phymode_configure(struct ci_hdrc *ci) { u32 portsc, lpm, sts = 0; switch (ci->platdata->phy_mode) { case USBPHY_INTERFACE_MODE_UTMI: portsc = PORTSC_PTS(PTS_UTMI); lpm = DEVLC_PTS(PTS_UTMI); break; case USBPHY_INTERFACE_MODE_UTMIW: portsc = PORTSC_PTS(PTS_UTMI) | PORTSC_PTW; lpm = DEVLC_PTS(PTS_UTMI) | DEVLC_PTW; break; case USBPHY_INTERFACE_MODE_ULPI: portsc = PORTSC_PTS(PTS_ULPI); lpm = DEVLC_PTS(PTS_ULPI); break; case USBPHY_INTERFACE_MODE_SERIAL: portsc = PORTSC_PTS(PTS_SERIAL); lpm = DEVLC_PTS(PTS_SERIAL); sts = 1; break; case USBPHY_INTERFACE_MODE_HSIC: portsc = PORTSC_PTS(PTS_HSIC); lpm = DEVLC_PTS(PTS_HSIC); break; default: return; } if (ci->hw_bank.lpm) { hw_write(ci, OP_DEVLC, DEVLC_PTS(7) | DEVLC_PTW, lpm); if (sts) hw_write(ci, OP_DEVLC, DEVLC_STS, DEVLC_STS); } else { hw_write(ci, OP_PORTSC, PORTSC_PTS(7) | PORTSC_PTW, portsc); if (sts) hw_write(ci, OP_PORTSC, PORTSC_STS, PORTSC_STS); } } /** * _ci_usb_phy_init: initialize phy taking in account both phy and usb_phy * interfaces * @ci: the controller * * This function returns an error code if the phy failed to init */ static int _ci_usb_phy_init(struct ci_hdrc *ci) { int ret; if (ci->phy) { ret = phy_init(ci->phy); if (ret) return ret; ret = phy_power_on(ci->phy); if (ret) { phy_exit(ci->phy); return ret; } } else { ret = usb_phy_init(ci->usb_phy); } return ret; } /** * _ci_usb_phy_exit: deinitialize phy taking in account both phy and usb_phy * interfaces * @ci: the controller */ static void ci_usb_phy_exit(struct ci_hdrc *ci) { if (ci->phy) { phy_power_off(ci->phy); phy_exit(ci->phy); } else { usb_phy_shutdown(ci->usb_phy); } } /** * ci_usb_phy_init: initialize phy according to different phy type * @ci: the controller * * This function returns an error code if usb_phy_init has failed */ static int ci_usb_phy_init(struct ci_hdrc *ci) { int ret; switch (ci->platdata->phy_mode) { case USBPHY_INTERFACE_MODE_UTMI: case USBPHY_INTERFACE_MODE_UTMIW: case USBPHY_INTERFACE_MODE_HSIC: ret = _ci_usb_phy_init(ci); if (!ret) hw_wait_phy_stable(); else return ret; hw_phymode_configure(ci); break; case USBPHY_INTERFACE_MODE_ULPI: case USBPHY_INTERFACE_MODE_SERIAL: hw_phymode_configure(ci); ret = _ci_usb_phy_init(ci); if (ret) return ret; break; default: ret = _ci_usb_phy_init(ci); if (!ret) hw_wait_phy_stable(); } return ret; } /** * hw_controller_reset: do controller reset * @ci: the controller * * This function returns an error code */ static int hw_controller_reset(struct ci_hdrc *ci) { int count = 0; hw_write(ci, OP_USBCMD, USBCMD_RST, USBCMD_RST); while (hw_read(ci, OP_USBCMD, USBCMD_RST)) { udelay(10); if (count++ > 1000) return -ETIMEDOUT; } return 0; } /** * hw_device_reset: resets chip (execute without interruption) * @ci: the controller * * This function returns an error code */ int hw_device_reset(struct ci_hdrc *ci) { int ret; /* should flush & stop before reset */ hw_write(ci, OP_ENDPTFLUSH, ~0, ~0); hw_write(ci, OP_USBCMD, USBCMD_RS, 0); ret = hw_controller_reset(ci); if (ret) { dev_err(ci->dev, "error resetting controller, ret=%d\n", ret); return ret; } if (ci->platdata->notify_event) ci->platdata->notify_event(ci, CI_HDRC_CONTROLLER_RESET_EVENT); if (ci->platdata->flags & CI_HDRC_DISABLE_STREAMING) hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS); if (ci->platdata->flags & CI_HDRC_FORCE_FULLSPEED) { if (ci->hw_bank.lpm) hw_write(ci, OP_DEVLC, DEVLC_PFSC, DEVLC_PFSC); else hw_write(ci, OP_PORTSC, PORTSC_PFSC, PORTSC_PFSC); } /* USBMODE should be configured step by step */ hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE); hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_DC); /* HW >= 2.3 */ hw_write(ci, OP_USBMODE, USBMODE_SLOM, USBMODE_SLOM); if (hw_read(ci, OP_USBMODE, USBMODE_CM) != USBMODE_CM_DC) { pr_err("cannot enter in %s device mode", ci_role(ci)->name); pr_err("lpm = %i", ci->hw_bank.lpm); return -ENODEV; } return 0; } /** * hw_wait_reg: wait the register value * * Sometimes, it needs to wait register value before going on. * Eg, when switch to device mode, the vbus value should be lower * than OTGSC_BSV before connects to host. * * @ci: the controller * @reg: register index * @mask: mast bit * @value: the bit value to wait * @timeout_ms: timeout in millisecond * * This function returns an error code if timeout */ int hw_wait_reg(struct ci_hdrc *ci, enum ci_hw_regs reg, u32 mask, u32 value, unsigned int timeout_ms) { unsigned long elapse = jiffies + msecs_to_jiffies(timeout_ms); while (hw_read(ci, reg, mask) != value) { if (time_after(jiffies, elapse)) { dev_err(ci->dev, "timeout waiting for %08x in %d\n", mask, reg); return -ETIMEDOUT; } msleep(20); } return 0; } static irqreturn_t ci_irq(int irq, void *data) { struct ci_hdrc *ci = data; irqreturn_t ret = IRQ_NONE; u32 otgsc = 0; if (ci->in_lpm) { disable_irq_nosync(irq); ci->wakeup_int = true; pm_runtime_get(ci->dev); return IRQ_HANDLED; } if (ci->is_otg) { otgsc = hw_read_otgsc(ci, ~0); if (ci_otg_is_fsm_mode(ci)) { ret = ci_otg_fsm_irq(ci); if (ret == IRQ_HANDLED) return ret; } } /* * Handle id change interrupt, it indicates device/host function * switch. */ if (ci->is_otg && (otgsc & OTGSC_IDIE) && (otgsc & OTGSC_IDIS)) { ci->id_event = true; /* Clear ID change irq status */ hw_write_otgsc(ci, OTGSC_IDIS, OTGSC_IDIS); ci_otg_queue_work(ci); return IRQ_HANDLED; } /* * Handle vbus change interrupt, it indicates device connection * and disconnection events. */ if (ci->is_otg && (otgsc & OTGSC_BSVIE) && (otgsc & OTGSC_BSVIS)) { ci->b_sess_valid_event = true; /* Clear BSV irq */ hw_write_otgsc(ci, OTGSC_BSVIS, OTGSC_BSVIS); ci_otg_queue_work(ci); return IRQ_HANDLED; } /* Handle device/host interrupt */ if (ci->role != CI_ROLE_END) ret = ci_role(ci)->irq(ci); return ret; } static int ci_get_platdata(struct device *dev, struct ci_hdrc_platform_data *platdata) { if (!platdata->phy_mode) platdata->phy_mode = of_usb_get_phy_mode(dev->of_node); if (!platdata->dr_mode) platdata->dr_mode = of_usb_get_dr_mode(dev->of_node); if (platdata->dr_mode == USB_DR_MODE_UNKNOWN) platdata->dr_mode = USB_DR_MODE_OTG; if (platdata->dr_mode != USB_DR_MODE_PERIPHERAL) { /* Get the vbus regulator */ platdata->reg_vbus = devm_regulator_get(dev, "vbus"); if (PTR_ERR(platdata->reg_vbus) == -EPROBE_DEFER) { return -EPROBE_DEFER; } else if (PTR_ERR(platdata->reg_vbus) == -ENODEV) { /* no vbus regulator is needed */ platdata->reg_vbus = NULL; } else if (IS_ERR(platdata->reg_vbus)) { dev_err(dev, "Getting regulator error: %ld\n", PTR_ERR(platdata->reg_vbus)); return PTR_ERR(platdata->reg_vbus); } /* Get TPL support */ if (!platdata->tpl_support) platdata->tpl_support = of_usb_host_tpl_support(dev->of_node); } if (of_usb_get_maximum_speed(dev->of_node) == USB_SPEED_FULL) platdata->flags |= CI_HDRC_FORCE_FULLSPEED; return 0; } static DEFINE_IDA(ci_ida); struct platform_device *ci_hdrc_add_device(struct device *dev, struct resource *res, int nres, struct ci_hdrc_platform_data *platdata) { struct platform_device *pdev; int id, ret; ret = ci_get_platdata(dev, platdata); if (ret) return ERR_PTR(ret); id = ida_simple_get(&ci_ida, 0, 0, GFP_KERNEL); if (id < 0) return ERR_PTR(id); pdev = platform_device_alloc("ci_hdrc", id); if (!pdev) { ret = -ENOMEM; goto put_id; } pdev->dev.parent = dev; pdev->dev.dma_mask = dev->dma_mask; pdev->dev.dma_parms = dev->dma_parms; dma_set_coherent_mask(&pdev->dev, dev->coherent_dma_mask); ret = platform_device_add_resources(pdev, res, nres); if (ret) goto err; ret = platform_device_add_data(pdev, platdata, sizeof(*platdata)); if (ret) goto err; ret = platform_device_add(pdev); if (ret) goto err; return pdev; err: platform_device_put(pdev); put_id: ida_simple_remove(&ci_ida, id); return ERR_PTR(ret); } EXPORT_SYMBOL_GPL(ci_hdrc_add_device); void ci_hdrc_remove_device(struct platform_device *pdev) { int id = pdev->id; platform_device_unregister(pdev); ida_simple_remove(&ci_ida, id); } EXPORT_SYMBOL_GPL(ci_hdrc_remove_device); static inline void ci_role_destroy(struct ci_hdrc *ci) { ci_hdrc_gadget_destroy(ci); ci_hdrc_host_destroy(ci); if (ci->is_otg) ci_hdrc_otg_destroy(ci); } static void ci_get_otg_capable(struct ci_hdrc *ci) { if (ci->platdata->flags & CI_HDRC_DUAL_ROLE_NOT_OTG) ci->is_otg = false; else ci->is_otg = (hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DC | DCCPARAMS_HC) == (DCCPARAMS_DC | DCCPARAMS_HC)); if (ci->is_otg) { dev_dbg(ci->dev, "It is OTG capable controller\n"); /* Disable and clear all OTG irq */ hw_write_otgsc(ci, OTGSC_INT_EN_BITS | OTGSC_INT_STATUS_BITS, OTGSC_INT_STATUS_BITS); } } static int ci_hdrc_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct ci_hdrc *ci; struct resource *res; void __iomem *base; int ret; enum usb_dr_mode dr_mode; if (!dev_get_platdata(dev)) { dev_err(dev, "platform data missing\n"); return -ENODEV; } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); base = devm_ioremap_resource(dev, res); if (IS_ERR(base)) return PTR_ERR(base); ci = devm_kzalloc(dev, sizeof(*ci), GFP_KERNEL); if (!ci) return -ENOMEM; ci->dev = dev; ci->platdata = dev_get_platdata(dev); ci->imx28_write_fix = !!(ci->platdata->flags & CI_HDRC_IMX28_WRITE_FIX); ci->supports_runtime_pm = !!(ci->platdata->flags & CI_HDRC_SUPPORTS_RUNTIME_PM); ret = hw_device_init(ci, base); if (ret < 0) { dev_err(dev, "can't initialize hardware\n"); return -ENODEV; } if (ci->platdata->phy) { ci->phy = ci->platdata->phy; } else if (ci->platdata->usb_phy) { ci->usb_phy = ci->platdata->usb_phy; } else { ci->phy = devm_phy_get(dev->parent, "usb-phy"); ci->usb_phy = devm_usb_get_phy(dev->parent, USB_PHY_TYPE_USB2); /* if both generic PHY and USB PHY layers aren't enabled */ if (PTR_ERR(ci->phy) == -ENOSYS && PTR_ERR(ci->usb_phy) == -ENXIO) return -ENXIO; if (IS_ERR(ci->phy) && IS_ERR(ci->usb_phy)) return -EPROBE_DEFER; if (IS_ERR(ci->phy)) ci->phy = NULL; else if (IS_ERR(ci->usb_phy)) ci->usb_phy = NULL; } ret = ci_usb_phy_init(ci); if (ret) { dev_err(dev, "unable to init phy: %d\n", ret); return ret; } ci->hw_bank.phys = res->start; ci->irq = platform_get_irq(pdev, 0); if (ci->irq < 0) { dev_err(dev, "missing IRQ\n"); ret = ci->irq; goto deinit_phy; } ci_get_otg_capable(ci); dr_mode = ci->platdata->dr_mode; /* initialize role(s) before the interrupt is requested */ if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) { ret = ci_hdrc_host_init(ci); if (ret) dev_info(dev, "doesn't support host\n"); } if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_PERIPHERAL) { ret = ci_hdrc_gadget_init(ci); if (ret) dev_info(dev, "doesn't support gadget\n"); } if (!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET]) { dev_err(dev, "no supported roles\n"); ret = -ENODEV; goto deinit_phy; } if (ci->is_otg && ci->roles[CI_ROLE_GADGET]) { ret = ci_hdrc_otg_init(ci); if (ret) { dev_err(dev, "init otg fails, ret = %d\n", ret); goto stop; } } if (ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET]) { if (ci->is_otg) { ci->role = ci_otg_role(ci); /* Enable ID change irq */ hw_write_otgsc(ci, OTGSC_IDIE, OTGSC_IDIE); } else { /* * If the controller is not OTG capable, but support * role switch, the defalt role is gadget, and the * user can switch it through debugfs. */ ci->role = CI_ROLE_GADGET; } } else { ci->role = ci->roles[CI_ROLE_HOST] ? CI_ROLE_HOST : CI_ROLE_GADGET; } /* only update vbus status for peripheral */ if (ci->role == CI_ROLE_GADGET) ci_handle_vbus_change(ci); if (!ci_otg_is_fsm_mode(ci)) { ret = ci_role_start(ci, ci->role); if (ret) { dev_err(dev, "can't start %s role\n", ci_role(ci)->name); goto stop; } } platform_set_drvdata(pdev, ci); ret = devm_request_irq(dev, ci->irq, ci_irq, IRQF_SHARED, ci->platdata->name, ci); if (ret) goto stop; if (ci->supports_runtime_pm) { pm_runtime_set_active(&pdev->dev); pm_runtime_enable(&pdev->dev); pm_runtime_set_autosuspend_delay(&pdev->dev, 2000); pm_runtime_mark_last_busy(ci->dev); pm_runtime_use_autosuspend(&pdev->dev); } if (ci_otg_is_fsm_mode(ci)) ci_hdrc_otg_fsm_start(ci); device_set_wakeup_capable(&pdev->dev, true); ret = dbg_create_files(ci); if (!ret) return 0; stop: ci_role_destroy(ci); deinit_phy: ci_usb_phy_exit(ci); return ret; } static int ci_hdrc_remove(struct platform_device *pdev) { struct ci_hdrc *ci = platform_get_drvdata(pdev); if (ci->supports_runtime_pm) { pm_runtime_get_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); pm_runtime_put_noidle(&pdev->dev); } dbg_remove_files(ci); ci_role_destroy(ci); ci_hdrc_enter_lpm(ci, true); ci_usb_phy_exit(ci); return 0; } #ifdef CONFIG_PM static void ci_controller_suspend(struct ci_hdrc *ci) { disable_irq(ci->irq); ci_hdrc_enter_lpm(ci, true); usb_phy_set_suspend(ci->usb_phy, 1); ci->in_lpm = true; enable_irq(ci->irq); } static int ci_controller_resume(struct device *dev) { struct ci_hdrc *ci = dev_get_drvdata(dev); dev_dbg(dev, "at %s\n", __func__); if (!ci->in_lpm) { WARN_ON(1); return 0; } ci_hdrc_enter_lpm(ci, false); if (ci->usb_phy) { usb_phy_set_suspend(ci->usb_phy, 0); usb_phy_set_wakeup(ci->usb_phy, false); hw_wait_phy_stable(); } ci->in_lpm = false; if (ci->wakeup_int) { ci->wakeup_int = false; pm_runtime_mark_last_busy(ci->dev); pm_runtime_put_autosuspend(ci->dev); enable_irq(ci->irq); } return 0; } #ifdef CONFIG_PM_SLEEP static int ci_suspend(struct device *dev) { struct ci_hdrc *ci = dev_get_drvdata(dev); if (ci->wq) flush_workqueue(ci->wq); /* * Controller needs to be active during suspend, otherwise the core * may run resume when the parent is at suspend if other driver's * suspend fails, it occurs before parent's suspend has not started, * but the core suspend has finished. */ if (ci->in_lpm) pm_runtime_resume(dev); if (ci->in_lpm) { WARN_ON(1); return 0; } if (device_may_wakeup(dev)) { usb_phy_set_wakeup(ci->usb_phy, true); enable_irq_wake(ci->irq); } ci_controller_suspend(ci); return 0; } static int ci_resume(struct device *dev) { struct ci_hdrc *ci = dev_get_drvdata(dev); int ret; if (device_may_wakeup(dev)) disable_irq_wake(ci->irq); ret = ci_controller_resume(dev); if (ret) return ret; if (ci->supports_runtime_pm) { pm_runtime_disable(dev); pm_runtime_set_active(dev); pm_runtime_enable(dev); } return ret; } #endif /* CONFIG_PM_SLEEP */ static int ci_runtime_suspend(struct device *dev) { struct ci_hdrc *ci = dev_get_drvdata(dev); dev_dbg(dev, "at %s\n", __func__); if (ci->in_lpm) { WARN_ON(1); return 0; } usb_phy_set_wakeup(ci->usb_phy, true); ci_controller_suspend(ci); return 0; } static int ci_runtime_resume(struct device *dev) { return ci_controller_resume(dev); } #endif /* CONFIG_PM */ static const struct dev_pm_ops ci_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(ci_suspend, ci_resume) SET_RUNTIME_PM_OPS(ci_runtime_suspend, ci_runtime_resume, NULL) }; static struct platform_driver ci_hdrc_driver = { .probe = ci_hdrc_probe, .remove = ci_hdrc_remove, .driver = { .name = "ci_hdrc", .pm = &ci_pm_ops, }, }; module_platform_driver(ci_hdrc_driver); MODULE_ALIAS("platform:ci_hdrc"); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("David Lopo "); MODULE_DESCRIPTION("ChipIdea HDRC Driver");