/* * Drivers for CSR SiRFprimaII onboard UARTs. * * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. * * Licensed under GPLv2 or later. */ #include /* UART Register Offset Define */ #define SIRFUART_LINE_CTRL 0x0040 #define SIRFUART_TX_RX_EN 0x004c #define SIRFUART_DIVISOR 0x0050 #define SIRFUART_INT_EN 0x0054 #define SIRFUART_INT_STATUS 0x0058 #define SIRFUART_TX_DMA_IO_CTRL 0x0100 #define SIRFUART_TX_DMA_IO_LEN 0x0104 #define SIRFUART_TX_FIFO_CTRL 0x0108 #define SIRFUART_TX_FIFO_LEVEL_CHK 0x010C #define SIRFUART_TX_FIFO_OP 0x0110 #define SIRFUART_TX_FIFO_STATUS 0x0114 #define SIRFUART_TX_FIFO_DATA 0x0118 #define SIRFUART_RX_DMA_IO_CTRL 0x0120 #define SIRFUART_RX_DMA_IO_LEN 0x0124 #define SIRFUART_RX_FIFO_CTRL 0x0128 #define SIRFUART_RX_FIFO_LEVEL_CHK 0x012C #define SIRFUART_RX_FIFO_OP 0x0130 #define SIRFUART_RX_FIFO_STATUS 0x0134 #define SIRFUART_RX_FIFO_DATA 0x0138 #define SIRFUART_AFC_CTRL 0x0140 #define SIRFUART_SWH_DMA_IO 0x0148 /* UART Line Control Register */ #define SIRFUART_DATA_BIT_LEN_MASK 0x3 #define SIRFUART_DATA_BIT_LEN_5 BIT(0) #define SIRFUART_DATA_BIT_LEN_6 1 #define SIRFUART_DATA_BIT_LEN_7 2 #define SIRFUART_DATA_BIT_LEN_8 3 #define SIRFUART_STOP_BIT_LEN_1 0 #define SIRFUART_STOP_BIT_LEN_2 BIT(2) #define SIRFUART_PARITY_EN BIT(3) #define SIRFUART_EVEN_BIT BIT(4) #define SIRFUART_STICK_BIT_MASK (7 << 3) #define SIRFUART_STICK_BIT_NONE (0 << 3) #define SIRFUART_STICK_BIT_EVEN BIT(3) #define SIRFUART_STICK_BIT_ODD (3 << 3) #define SIRFUART_STICK_BIT_MARK (5 << 3) #define SIRFUART_STICK_BIT_SPACE (7 << 3) #define SIRFUART_SET_BREAK BIT(6) #define SIRFUART_LOOP_BACK BIT(7) #define SIRFUART_PARITY_MASK (7 << 3) #define SIRFUART_DUMMY_READ BIT(16) #define SIRFSOC_UART_RX_TIMEOUT(br, to) (((br) * (((to) + 999) / 1000)) / 1000) #define SIRFUART_RECV_TIMEOUT_MASK (0xFFFF << 16) #define SIRFUART_RECV_TIMEOUT(x) (((x) & 0xFFFF) << 16) /* UART Auto Flow Control */ #define SIRFUART_AFC_RX_THD_MASK 0x000000FF #define SIRFUART_AFC_RX_EN BIT(8) #define SIRFUART_AFC_TX_EN BIT(9) #define SIRFUART_CTS_CTRL BIT(10) #define SIRFUART_RTS_CTRL BIT(11) #define SIRFUART_CTS_IN_STATUS BIT(12) #define SIRFUART_RTS_OUT_STATUS BIT(13) /* UART Interrupt Enable Register */ #define SIRFUART_RX_DONE_INT BIT(0) #define SIRFUART_TX_DONE_INT BIT(1) #define SIRFUART_RX_OFLOW_INT BIT(2) #define SIRFUART_TX_ALLOUT_INT BIT(3) #define SIRFUART_RX_IO_DMA_INT BIT(4) #define SIRFUART_TX_IO_DMA_INT BIT(5) #define SIRFUART_RXFIFO_FULL_INT BIT(6) #define SIRFUART_TXFIFO_EMPTY_INT BIT(7) #define SIRFUART_RXFIFO_THD_INT BIT(8) #define SIRFUART_TXFIFO_THD_INT BIT(9) #define SIRFUART_FRM_ERR_INT BIT(10) #define SIRFUART_RXD_BREAK_INT BIT(11) #define SIRFUART_RX_TIMEOUT_INT BIT(12) #define SIRFUART_PARITY_ERR_INT BIT(13) #define SIRFUART_CTS_INT_EN BIT(14) #define SIRFUART_RTS_INT_EN BIT(15) /* UART Interrupt Status Register */ #define SIRFUART_RX_DONE BIT(0) #define SIRFUART_TX_DONE BIT(1) #define SIRFUART_RX_OFLOW BIT(2) #define SIRFUART_TX_ALL_EMPTY BIT(3) #define SIRFUART_DMA_IO_RX_DONE BIT(4) #define SIRFUART_DMA_IO_TX_DONE BIT(5) #define SIRFUART_RXFIFO_FULL BIT(6) #define SIRFUART_TXFIFO_EMPTY BIT(7) #define SIRFUART_RXFIFO_THD_REACH BIT(8) #define SIRFUART_TXFIFO_THD_REACH BIT(9) #define SIRFUART_FRM_ERR BIT(10) #define SIRFUART_RXD_BREAK BIT(11) #define SIRFUART_RX_TIMEOUT BIT(12) #define SIRFUART_PARITY_ERR BIT(13) #define SIRFUART_CTS_CHANGE BIT(14) #define SIRFUART_RTS_CHANGE BIT(15) #define SIRFUART_PLUG_IN BIT(16) #define SIRFUART_ERR_INT_STAT \ (SIRFUART_RX_OFLOW | \ SIRFUART_FRM_ERR | \ SIRFUART_RXD_BREAK | \ SIRFUART_PARITY_ERR) #define SIRFUART_ERR_INT_EN \ (SIRFUART_RX_OFLOW_INT | \ SIRFUART_FRM_ERR_INT | \ SIRFUART_RXD_BREAK_INT | \ SIRFUART_PARITY_ERR_INT) #define SIRFUART_TX_INT_EN SIRFUART_TXFIFO_EMPTY_INT #define SIRFUART_RX_IO_INT_EN \ (SIRFUART_RX_TIMEOUT_INT | \ SIRFUART_RXFIFO_THD_INT | \ SIRFUART_RXFIFO_FULL_INT | \ SIRFUART_ERR_INT_EN) /* UART FIFO Register */ #define SIRFUART_TX_FIFO_STOP 0x0 #define SIRFUART_TX_FIFO_RESET 0x1 #define SIRFUART_TX_FIFO_START 0x2 #define SIRFUART_RX_FIFO_STOP 0x0 #define SIRFUART_RX_FIFO_RESET 0x1 #define SIRFUART_RX_FIFO_START 0x2 #define SIRFUART_TX_MODE_DMA 0 #define SIRFUART_TX_MODE_IO 1 #define SIRFUART_RX_MODE_DMA 0 #define SIRFUART_RX_MODE_IO 1 #define SIRFUART_RX_EN 0x1 #define SIRFUART_TX_EN 0x2 /* Generic Definitions */ #define SIRFSOC_UART_NAME "ttySiRF" #define SIRFSOC_UART_MAJOR 0 #define SIRFSOC_UART_MINOR 0 #define SIRFUART_PORT_NAME "sirfsoc-uart" #define SIRFUART_MAP_SIZE 0x200 #define SIRFSOC_UART_NR 5 #define SIRFSOC_PORT_TYPE 0xa5 /* Baud Rate Calculation */ #define SIRF_MIN_SAMPLE_DIV 0xf #define SIRF_MAX_SAMPLE_DIV 0x3f #define SIRF_IOCLK_DIV_MAX 0xffff #define SIRF_SAMPLE_DIV_SHIFT 16 #define SIRF_IOCLK_DIV_MASK 0xffff #define SIRF_SAMPLE_DIV_MASK 0x3f0000 #define SIRF_BAUD_RATE_SUPPORT_NR 18 /* For Fast Baud Rate Calculation */ struct sirfsoc_baudrate_to_regv { unsigned int baud_rate; unsigned int reg_val; }; struct sirfsoc_uart_port { unsigned char hw_flow_ctrl; unsigned char ms_enabled; struct uart_port port; struct pinctrl *p; }; /* Hardware Flow Control */ #define SIRFUART_AFC_CTRL_RX_THD 0x70 /* Register Access Control */ #define portaddr(port, reg) ((port)->membase + (reg)) #define rd_regb(port, reg) (__raw_readb(portaddr(port, reg))) #define rd_regl(port, reg) (__raw_readl(portaddr(port, reg))) #define wr_regb(port, reg, val) __raw_writeb(val, portaddr(port, reg)) #define wr_regl(port, reg, val) __raw_writel(val, portaddr(port, reg)) /* UART Port Mask */ #define SIRFUART_FIFOLEVEL_MASK(port) ((port->line == 1) ? (0x1f) : (0x7f)) #define SIRFUART_FIFOFULL_MASK(port) ((port->line == 1) ? (0x20) : (0x80)) #define SIRFUART_FIFOEMPTY_MASK(port) ((port->line == 1) ? (0x40) : (0x100)) /* I/O Mode */ #define SIRFSOC_UART_IO_RX_MAX_CNT 256 #define SIRFSOC_UART_IO_TX_REASONABLE_CNT 6