/* * Universal/legacy driver for 8250/16550-type serial ports * * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. * * Copyright (C) 2001 Russell King. * * Supports: ISA-compatible 8250/16550 ports * PNP 8250/16550 ports * early_serial_setup() ports * userspace-configurable "phantom" ports * "serial8250" platform devices * serial8250_register_8250_port() ports * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef CONFIG_SPARC #include #endif #include #include "8250.h" /* * Configuration: * share_irqs - whether we pass IRQF_SHARED to request_irq(). This option * is unsafe when used on edge-triggered interrupts. */ static unsigned int share_irqs = SERIAL8250_SHARE_IRQS; static unsigned int nr_uarts = CONFIG_SERIAL_8250_RUNTIME_UARTS; static struct uart_driver serial8250_reg; static unsigned int skip_txen_test; /* force skip of txen test at init time */ #define PASS_LIMIT 512 #include /* * SERIAL_PORT_DFNS tells us about built-in ports that have no * standard enumeration mechanism. Platforms that can find all * serial ports via mechanisms like ACPI or PCI need not supply it. */ #ifndef SERIAL_PORT_DFNS #define SERIAL_PORT_DFNS #endif static const struct old_serial_port old_serial_port[] = { SERIAL_PORT_DFNS /* defined in asm/serial.h */ }; #define UART_NR CONFIG_SERIAL_8250_NR_UARTS #ifdef CONFIG_SERIAL_8250_RSA #define PORT_RSA_MAX 4 static unsigned long probe_rsa[PORT_RSA_MAX]; static unsigned int probe_rsa_count; #endif /* CONFIG_SERIAL_8250_RSA */ struct irq_info { struct hlist_node node; int irq; spinlock_t lock; /* Protects list not the hash */ struct list_head *head; }; #define NR_IRQ_HASH 32 /* Can be adjusted later */ static struct hlist_head irq_lists[NR_IRQ_HASH]; static DEFINE_MUTEX(hash_mutex); /* Used to walk the hash */ /* * This is the serial driver's interrupt routine. * * Arjan thinks the old way was overly complex, so it got simplified. * Alan disagrees, saying that need the complexity to handle the weird * nature of ISA shared interrupts. (This is a special exception.) * * In order to handle ISA shared interrupts properly, we need to check * that all ports have been serviced, and therefore the ISA interrupt * line has been de-asserted. * * This means we need to loop through all ports. checking that they * don't have an interrupt pending. */ static irqreturn_t serial8250_interrupt(int irq, void *dev_id) { struct irq_info *i = dev_id; struct list_head *l, *end = NULL; int pass_counter = 0, handled = 0; pr_debug("%s(%d): start\n", __func__, irq); spin_lock(&i->lock); l = i->head; do { struct uart_8250_port *up; struct uart_port *port; up = list_entry(l, struct uart_8250_port, list); port = &up->port; if (port->handle_irq(port)) { handled = 1; end = NULL; } else if (end == NULL) end = l; l = l->next; if (l == i->head && pass_counter++ > PASS_LIMIT) { /* If we hit this, we're dead. */ printk_ratelimited(KERN_ERR "serial8250: too much work for irq%d\n", irq); break; } } while (l != end); spin_unlock(&i->lock); pr_debug("%s(%d): end\n", __func__, irq); return IRQ_RETVAL(handled); } /* * To support ISA shared interrupts, we need to have one interrupt * handler that ensures that the IRQ line has been deasserted * before returning. Failing to do this will result in the IRQ * line being stuck active, and, since ISA irqs are edge triggered, * no more IRQs will be seen. */ static void serial_do_unlink(struct irq_info *i, struct uart_8250_port *up) { spin_lock_irq(&i->lock); if (!list_empty(i->head)) { if (i->head == &up->list) i->head = i->head->next; list_del(&up->list); } else { BUG_ON(i->head != &up->list); i->head = NULL; } spin_unlock_irq(&i->lock); /* List empty so throw away the hash node */ if (i->head == NULL) { hlist_del(&i->node); kfree(i); } } static int serial_link_irq_chain(struct uart_8250_port *up) { struct hlist_head *h; struct hlist_node *n; struct irq_info *i; int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0; mutex_lock(&hash_mutex); h = &irq_lists[up->port.irq % NR_IRQ_HASH]; hlist_for_each(n, h) { i = hlist_entry(n, struct irq_info, node); if (i->irq == up->port.irq) break; } if (n == NULL) { i = kzalloc(sizeof(struct irq_info), GFP_KERNEL); if (i == NULL) { mutex_unlock(&hash_mutex); return -ENOMEM; } spin_lock_init(&i->lock); i->irq = up->port.irq; hlist_add_head(&i->node, h); } mutex_unlock(&hash_mutex); spin_lock_irq(&i->lock); if (i->head) { list_add(&up->list, i->head); spin_unlock_irq(&i->lock); ret = 0; } else { INIT_LIST_HEAD(&up->list); i->head = &up->list; spin_unlock_irq(&i->lock); irq_flags |= up->port.irqflags; ret = request_irq(up->port.irq, serial8250_interrupt, irq_flags, "serial", i); if (ret < 0) serial_do_unlink(i, up); } return ret; } static void serial_unlink_irq_chain(struct uart_8250_port *up) { /* * yes, some broken gcc emit "warning: 'i' may be used uninitialized" * but no, we are not going to take a patch that assigns NULL below. */ struct irq_info *i; struct hlist_node *n; struct hlist_head *h; mutex_lock(&hash_mutex); h = &irq_lists[up->port.irq % NR_IRQ_HASH]; hlist_for_each(n, h) { i = hlist_entry(n, struct irq_info, node); if (i->irq == up->port.irq) break; } BUG_ON(n == NULL); BUG_ON(i->head == NULL); if (list_empty(i->head)) free_irq(up->port.irq, i); serial_do_unlink(i, up); mutex_unlock(&hash_mutex); } /* * This function is used to handle ports that do not have an * interrupt. This doesn't work very well for 16450's, but gives * barely passable results for a 16550A. (Although at the expense * of much CPU overhead). */ static void serial8250_timeout(unsigned long data) { struct uart_8250_port *up = (struct uart_8250_port *)data; up->port.handle_irq(&up->port); mod_timer(&up->timer, jiffies + uart_poll_timeout(&up->port)); } static void serial8250_backup_timeout(unsigned long data) { struct uart_8250_port *up = (struct uart_8250_port *)data; unsigned int iir, ier = 0, lsr; unsigned long flags; spin_lock_irqsave(&up->port.lock, flags); /* * Must disable interrupts or else we risk racing with the interrupt * based handler. */ if (up->port.irq) { ier = serial_in(up, UART_IER); serial_out(up, UART_IER, 0); } iir = serial_in(up, UART_IIR); /* * This should be a safe test for anyone who doesn't trust the * IIR bits on their UART, but it's specifically designed for * the "Diva" UART used on the management processor on many HP * ia64 and parisc boxes. */ lsr = serial_in(up, UART_LSR); up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; if ((iir & UART_IIR_NO_INT) && (up->ier & UART_IER_THRI) && (!uart_circ_empty(&up->port.state->xmit) || up->port.x_char) && (lsr & UART_LSR_THRE)) { iir &= ~(UART_IIR_ID | UART_IIR_NO_INT); iir |= UART_IIR_THRI; } if (!(iir & UART_IIR_NO_INT)) serial8250_tx_chars(up); if (up->port.irq) serial_out(up, UART_IER, ier); spin_unlock_irqrestore(&up->port.lock, flags); /* Standard timer interval plus 0.2s to keep the port running */ mod_timer(&up->timer, jiffies + uart_poll_timeout(&up->port) + HZ / 5); } static int univ8250_setup_irq(struct uart_8250_port *up) { struct uart_port *port = &up->port; int retval = 0; /* * The above check will only give an accurate result the first time * the port is opened so this value needs to be preserved. */ if (up->bugs & UART_BUG_THRE) { pr_debug("ttyS%d - using backup timer\n", serial_index(port)); up->timer.function = serial8250_backup_timeout; up->timer.data = (unsigned long)up; mod_timer(&up->timer, jiffies + uart_poll_timeout(port) + HZ / 5); } /* * If the "interrupt" for this port doesn't correspond with any * hardware interrupt, we use a timer-based system. The original * driver used to do this with IRQ0. */ if (!port->irq) { up->timer.data = (unsigned long)up; mod_timer(&up->timer, jiffies + uart_poll_timeout(port)); } else retval = serial_link_irq_chain(up); return retval; } static void univ8250_release_irq(struct uart_8250_port *up) { struct uart_port *port = &up->port; del_timer_sync(&up->timer); up->timer.function = serial8250_timeout; if (port->irq) serial_unlink_irq_chain(up); } #ifdef CONFIG_SERIAL_8250_RSA static int serial8250_request_rsa_resource(struct uart_8250_port *up) { unsigned long start = UART_RSA_BASE << up->port.regshift; unsigned int size = 8 << up->port.regshift; struct uart_port *port = &up->port; int ret = -EINVAL; switch (port->iotype) { case UPIO_HUB6: case UPIO_PORT: start += port->iobase; if (request_region(start, size, "serial-rsa")) ret = 0; else ret = -EBUSY; break; } return ret; } static void serial8250_release_rsa_resource(struct uart_8250_port *up) { unsigned long offset = UART_RSA_BASE << up->port.regshift; unsigned int size = 8 << up->port.regshift; struct uart_port *port = &up->port; switch (port->iotype) { case UPIO_HUB6: case UPIO_PORT: release_region(port->iobase + offset, size); break; } } #endif static const struct uart_ops *base_ops; static struct uart_ops univ8250_port_ops; static const struct uart_8250_ops univ8250_driver_ops = { .setup_irq = univ8250_setup_irq, .release_irq = univ8250_release_irq, }; static struct uart_8250_port serial8250_ports[UART_NR]; /** * serial8250_get_port - retrieve struct uart_8250_port * @line: serial line number * * This function retrieves struct uart_8250_port for the specific line. * This struct *must* *not* be used to perform a 8250 or serial core operation * which is not accessible otherwise. Its only purpose is to make the struct * accessible to the runtime-pm callbacks for context suspend/restore. * The lock assumption made here is none because runtime-pm suspend/resume * callbacks should not be invoked if there is any operation performed on the * port. */ struct uart_8250_port *serial8250_get_port(int line) { return &serial8250_ports[line]; } EXPORT_SYMBOL_GPL(serial8250_get_port); static void (*serial8250_isa_config)(int port, struct uart_port *up, u32 *capabilities); void serial8250_set_isa_configurator( void (*v)(int port, struct uart_port *up, u32 *capabilities)) { serial8250_isa_config = v; } EXPORT_SYMBOL(serial8250_set_isa_configurator); #ifdef CONFIG_SERIAL_8250_RSA static void univ8250_config_port(struct uart_port *port, int flags) { struct uart_8250_port *up = up_to_u8250p(port); up->probe &= ~UART_PROBE_RSA; if (port->type == PORT_RSA) { if (serial8250_request_rsa_resource(up) == 0) up->probe |= UART_PROBE_RSA; } else if (flags & UART_CONFIG_TYPE) { int i; for (i = 0; i < probe_rsa_count; i++) { if (probe_rsa[i] == up->port.iobase) { if (serial8250_request_rsa_resource(up) == 0) up->probe |= UART_PROBE_RSA; break; } } } base_ops->config_port(port, flags); if (port->type != PORT_RSA && up->probe & UART_PROBE_RSA) serial8250_release_rsa_resource(up); } static int univ8250_request_port(struct uart_port *port) { struct uart_8250_port *up = up_to_u8250p(port); int ret; ret = base_ops->request_port(port); if (ret == 0 && port->type == PORT_RSA) { ret = serial8250_request_rsa_resource(up); if (ret < 0) base_ops->release_port(port); } return ret; } static void univ8250_release_port(struct uart_port *port) { struct uart_8250_port *up = up_to_u8250p(port); if (port->type == PORT_RSA) serial8250_release_rsa_resource(up); base_ops->release_port(port); } static void univ8250_rsa_support(struct uart_ops *ops) { ops->config_port = univ8250_config_port; ops->request_port = univ8250_request_port; ops->release_port = univ8250_release_port; } #else #define univ8250_rsa_support(x) do { } while (0) #endif /* CONFIG_SERIAL_8250_RSA */ static void __init serial8250_isa_init_ports(void) { struct uart_8250_port *up; static int first = 1; int i, irqflag = 0; if (!first) return; first = 0; if (nr_uarts > UART_NR) nr_uarts = UART_NR; for (i = 0; i < nr_uarts; i++) { struct uart_8250_port *up = &serial8250_ports[i]; struct uart_port *port = &up->port; port->line = i; serial8250_init_port(up); if (!base_ops) base_ops = port->ops; port->ops = &univ8250_port_ops; init_timer(&up->timer); up->timer.function = serial8250_timeout; up->ops = &univ8250_driver_ops; /* * ALPHA_KLUDGE_MCR needs to be killed. */ up->mcr_mask = ~ALPHA_KLUDGE_MCR; up->mcr_force = ALPHA_KLUDGE_MCR; } /* chain base port ops to support Remote Supervisor Adapter */ univ8250_port_ops = *base_ops; univ8250_rsa_support(&univ8250_port_ops); if (share_irqs) irqflag = IRQF_SHARED; for (i = 0, up = serial8250_ports; i < ARRAY_SIZE(old_serial_port) && i < nr_uarts; i++, up++) { struct uart_port *port = &up->port; port->iobase = old_serial_port[i].port; port->irq = irq_canonicalize(old_serial_port[i].irq); port->irqflags = 0; port->uartclk = old_serial_port[i].baud_base * 16; port->flags = old_serial_port[i].flags; port->hub6 = 0; port->membase = old_serial_port[i].iomem_base; port->iotype = old_serial_port[i].io_type; port->regshift = old_serial_port[i].iomem_reg_shift; serial8250_set_defaults(up); port->irqflags |= irqflag; if (serial8250_isa_config != NULL) serial8250_isa_config(i, &up->port, &up->capabilities); } } static void __init serial8250_register_ports(struct uart_driver *drv, struct device *dev) { int i; for (i = 0; i < nr_uarts; i++) { struct uart_8250_port *up = &serial8250_ports[i]; if (up->port.type == PORT_8250_CIR) continue; if (up->port.dev) continue; up->port.dev = dev; if (skip_txen_test) up->port.flags |= UPF_NO_TXEN_TEST; uart_add_one_port(drv, &up->port); } } #ifdef CONFIG_SERIAL_8250_CONSOLE static void univ8250_console_write(struct console *co, const char *s, unsigned int count) { struct uart_8250_port *up = &serial8250_ports[co->index]; serial8250_console_write(up, s, count); } static int univ8250_console_setup(struct console *co, char *options) { struct uart_port *port; int retval; /* * Check whether an invalid uart number has been specified, and * if so, search for the first available port that does have * console support. */ if (co->index >= nr_uarts) co->index = 0; port = &serial8250_ports[co->index].port; /* link port to console */ port->cons = co; retval = serial8250_console_setup(port, options, false); if (retval != 0) port->cons = NULL; return retval; } /** * univ8250_console_match - non-standard console matching * @co: registering console * @name: name from console command line * @idx: index from console command line * @options: ptr to option string from console command line * * Only attempts to match console command lines of the form: * console=uart[8250],io|mmio|mmio16|mmio32,[,] * console=uart[8250],0x[,] * This form is used to register an initial earlycon boot console and * replace it with the serial8250_console at 8250 driver init. * * Performs console setup for a match (as required by interface) * If no are specified, then assume the h/w is already setup. * * Returns 0 if console matches; otherwise non-zero to use default matching */ static int univ8250_console_match(struct console *co, char *name, int idx, char *options) { char match[] = "uart"; /* 8250-specific earlycon name */ unsigned char iotype; resource_size_t addr; int i; if (strncmp(name, match, 4) != 0) return -ENODEV; if (uart_parse_earlycon(options, &iotype, &addr, &options)) return -ENODEV; /* try to match the port specified on the command line */ for (i = 0; i < nr_uarts; i++) { struct uart_port *port = &serial8250_ports[i].port; if (port->iotype != iotype) continue; if ((iotype == UPIO_MEM || iotype == UPIO_MEM16 || iotype == UPIO_MEM32 || iotype == UPIO_MEM32BE) && (port->mapbase != addr)) continue; if (iotype == UPIO_PORT && port->iobase != addr) continue; co->index = i; port->cons = co; return serial8250_console_setup(port, options, true); } return -ENODEV; } static struct console univ8250_console = { .name = "ttyS", .write = univ8250_console_write, .device = uart_console_device, .setup = univ8250_console_setup, .match = univ8250_console_match, .flags = CON_PRINTBUFFER | CON_ANYTIME | CON_CONSDEV, .index = -1, .data = &serial8250_reg, }; static int __init univ8250_console_init(void) { if (nr_uarts == 0) return -ENODEV; serial8250_isa_init_ports(); register_console(&univ8250_console); return 0; } console_initcall(univ8250_console_init); #define SERIAL8250_CONSOLE (&univ8250_console) #else #define SERIAL8250_CONSOLE NULL #endif static struct uart_driver serial8250_reg = { .owner = THIS_MODULE, .driver_name = "serial", .dev_name = "ttyS", .major = TTY_MAJOR, .minor = 64, .cons = SERIAL8250_CONSOLE, }; /* * early_serial_setup - early registration for 8250 ports * * Setup an 8250 port structure prior to console initialisation. Use * after console initialisation will cause undefined behaviour. */ int __init early_serial_setup(struct uart_port *port) { struct uart_port *p; if (port->line >= ARRAY_SIZE(serial8250_ports) || nr_uarts == 0) return -ENODEV; serial8250_isa_init_ports(); p = &serial8250_ports[port->line].port; p->iobase = port->iobase; p->membase = port->membase; p->irq = port->irq; p->irqflags = port->irqflags; p->uartclk = port->uartclk; p->fifosize = port->fifosize; p->regshift = port->regshift; p->iotype = port->iotype; p->flags = port->flags; p->mapbase = port->mapbase; p->mapsize = port->mapsize; p->private_data = port->private_data; p->type = port->type; p->line = port->line; serial8250_set_defaults(up_to_u8250p(p)); if (port->serial_in) p->serial_in = port->serial_in; if (port->serial_out) p->serial_out = port->serial_out; if (port->handle_irq) p->handle_irq = port->handle_irq; return 0; } /** * serial8250_suspend_port - suspend one serial port * @line: serial line number * * Suspend one serial port. */ void serial8250_suspend_port(int line) { struct uart_8250_port *up = &serial8250_ports[line]; struct uart_port *port = &up->port; if (!console_suspend_enabled && uart_console(port) && port->type != PORT_8250) { unsigned char canary = 0xa5; serial_out(up, UART_SCR, canary); if (serial_in(up, UART_SCR) == canary) up->canary = canary; } uart_suspend_port(&serial8250_reg, port); } EXPORT_SYMBOL(serial8250_suspend_port); /** * serial8250_resume_port - resume one serial port * @line: serial line number * * Resume one serial port. */ void serial8250_resume_port(int line) { struct uart_8250_port *up = &serial8250_ports[line]; struct uart_port *port = &up->port; up->canary = 0; if (up->capabilities & UART_NATSEMI) { /* Ensure it's still in high speed mode */ serial_port_out(port, UART_LCR, 0xE0); ns16550a_goto_highspeed(up); serial_port_out(port, UART_LCR, 0); port->uartclk = 921600*16; } uart_resume_port(&serial8250_reg, port); } EXPORT_SYMBOL(serial8250_resume_port); /* * Register a set of serial devices attached to a platform device. The * list is terminated with a zero flags entry, which means we expect * all entries to have at least UPF_BOOT_AUTOCONF set. */ static int serial8250_probe(struct platform_device *dev) { struct plat_serial8250_port *p = dev_get_platdata(&dev->dev); struct uart_8250_port uart; int ret, i, irqflag = 0; memset(&uart, 0, sizeof(uart)); if (share_irqs) irqflag = IRQF_SHARED; for (i = 0; p && p->flags != 0; p++, i++) { uart.port.iobase = p->iobase; uart.port.membase = p->membase; uart.port.irq = p->irq; uart.port.irqflags = p->irqflags; uart.port.uartclk = p->uartclk; uart.port.regshift = p->regshift; uart.port.iotype = p->iotype; uart.port.flags = p->flags; uart.port.mapbase = p->mapbase; uart.port.hub6 = p->hub6; uart.port.private_data = p->private_data; uart.port.type = p->type; uart.port.serial_in = p->serial_in; uart.port.serial_out = p->serial_out; uart.port.handle_irq = p->handle_irq; uart.port.handle_break = p->handle_break; uart.port.set_termios = p->set_termios; uart.port.set_ldisc = p->set_ldisc; uart.port.get_mctrl = p->get_mctrl; uart.port.pm = p->pm; uart.port.dev = &dev->dev; uart.port.irqflags |= irqflag; ret = serial8250_register_8250_port(&uart); if (ret < 0) { dev_err(&dev->dev, "unable to register port at index %d " "(IO%lx MEM%llx IRQ%d): %d\n", i, p->iobase, (unsigned long long)p->mapbase, p->irq, ret); } } return 0; } /* * Remove serial ports registered against a platform device. */ static int serial8250_remove(struct platform_device *dev) { int i; for (i = 0; i < nr_uarts; i++) { struct uart_8250_port *up = &serial8250_ports[i]; if (up->port.dev == &dev->dev) serial8250_unregister_port(i); } return 0; } static int serial8250_suspend(struct platform_device *dev, pm_message_t state) { int i; for (i = 0; i < UART_NR; i++) { struct uart_8250_port *up = &serial8250_ports[i]; if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) uart_suspend_port(&serial8250_reg, &up->port); } return 0; } static int serial8250_resume(struct platform_device *dev) { int i; for (i = 0; i < UART_NR; i++) { struct uart_8250_port *up = &serial8250_ports[i]; if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) serial8250_resume_port(i); } return 0; } static struct platform_driver serial8250_isa_driver = { .probe = serial8250_probe, .remove = serial8250_remove, .suspend = serial8250_suspend, .resume = serial8250_resume, .driver = { .name = "serial8250", }, }; /* * This "device" covers _all_ ISA 8250-compatible serial devices listed * in the table in include/asm/serial.h */ static struct platform_device *serial8250_isa_devs; /* * serial8250_register_8250_port and serial8250_unregister_port allows for * 16x50 serial ports to be configured at run-time, to support PCMCIA * modems and PCI multiport cards. */ static DEFINE_MUTEX(serial_mutex); static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *port) { int i; /* * First, find a port entry which matches. */ for (i = 0; i < nr_uarts; i++) if (uart_match_port(&serial8250_ports[i].port, port)) return &serial8250_ports[i]; /* try line number first if still available */ i = port->line; if (i < nr_uarts && serial8250_ports[i].port.type == PORT_UNKNOWN && serial8250_ports[i].port.iobase == 0) return &serial8250_ports[i]; /* * We didn't find a matching entry, so look for the first * free entry. We look for one which hasn't been previously * used (indicated by zero iobase). */ for (i = 0; i < nr_uarts; i++) if (serial8250_ports[i].port.type == PORT_UNKNOWN && serial8250_ports[i].port.iobase == 0) return &serial8250_ports[i]; /* * That also failed. Last resort is to find any entry which * doesn't have a real port associated with it. */ for (i = 0; i < nr_uarts; i++) if (serial8250_ports[i].port.type == PORT_UNKNOWN) return &serial8250_ports[i]; return NULL; } /** * serial8250_register_8250_port - register a serial port * @up: serial port template * * Configure the serial port specified by the request. If the * port exists and is in use, it is hung up and unregistered * first. * * The port is then probed and if necessary the IRQ is autodetected * If this fails an error is returned. * * On success the port is ready to use and the line number is returned. */ int serial8250_register_8250_port(struct uart_8250_port *up) { struct uart_8250_port *uart; int ret = -ENOSPC; if (up->port.uartclk == 0) return -EINVAL; mutex_lock(&serial_mutex); uart = serial8250_find_match_or_unused(&up->port); if (uart && uart->port.type != PORT_8250_CIR) { if (uart->port.dev) uart_remove_one_port(&serial8250_reg, &uart->port); uart->port.iobase = up->port.iobase; uart->port.membase = up->port.membase; uart->port.irq = up->port.irq; uart->port.irqflags = up->port.irqflags; uart->port.uartclk = up->port.uartclk; uart->port.fifosize = up->port.fifosize; uart->port.regshift = up->port.regshift; uart->port.iotype = up->port.iotype; uart->port.flags = up->port.flags | UPF_BOOT_AUTOCONF; uart->bugs = up->bugs; uart->port.mapbase = up->port.mapbase; uart->port.mapsize = up->port.mapsize; uart->port.private_data = up->port.private_data; uart->tx_loadsz = up->tx_loadsz; uart->capabilities = up->capabilities; uart->port.throttle = up->port.throttle; uart->port.unthrottle = up->port.unthrottle; uart->port.rs485_config = up->port.rs485_config; uart->port.rs485 = up->port.rs485; uart->dma = up->dma; /* Take tx_loadsz from fifosize if it wasn't set separately */ if (uart->port.fifosize && !uart->tx_loadsz) uart->tx_loadsz = uart->port.fifosize; if (up->port.dev) uart->port.dev = up->port.dev; if (skip_txen_test) uart->port.flags |= UPF_NO_TXEN_TEST; if (up->port.flags & UPF_FIXED_TYPE) uart->port.type = up->port.type; serial8250_set_defaults(uart); /* Possibly override default I/O functions. */ if (up->port.serial_in) uart->port.serial_in = up->port.serial_in; if (up->port.serial_out) uart->port.serial_out = up->port.serial_out; if (up->port.handle_irq) uart->port.handle_irq = up->port.handle_irq; /* Possibly override set_termios call */ if (up->port.set_termios) uart->port.set_termios = up->port.set_termios; if (up->port.set_ldisc) uart->port.set_ldisc = up->port.set_ldisc; if (up->port.get_mctrl) uart->port.get_mctrl = up->port.get_mctrl; if (up->port.set_mctrl) uart->port.set_mctrl = up->port.set_mctrl; if (up->port.startup) uart->port.startup = up->port.startup; if (up->port.shutdown) uart->port.shutdown = up->port.shutdown; if (up->port.pm) uart->port.pm = up->port.pm; if (up->port.handle_break) uart->port.handle_break = up->port.handle_break; if (up->dl_read) uart->dl_read = up->dl_read; if (up->dl_write) uart->dl_write = up->dl_write; if (uart->port.type != PORT_8250_CIR) { if (serial8250_isa_config != NULL) serial8250_isa_config(0, &uart->port, &uart->capabilities); ret = uart_add_one_port(&serial8250_reg, &uart->port); if (ret == 0) ret = uart->port.line; } else { dev_info(uart->port.dev, "skipping CIR port at 0x%lx / 0x%llx, IRQ %d\n", uart->port.iobase, (unsigned long long)uart->port.mapbase, uart->port.irq); ret = 0; } } mutex_unlock(&serial_mutex); return ret; } EXPORT_SYMBOL(serial8250_register_8250_port); /** * serial8250_unregister_port - remove a 16x50 serial port at runtime * @line: serial line number * * Remove one serial port. This may not be called from interrupt * context. We hand the port back to the our control. */ void serial8250_unregister_port(int line) { struct uart_8250_port *uart = &serial8250_ports[line]; mutex_lock(&serial_mutex); if (uart->em485) { unsigned long flags; spin_lock_irqsave(&uart->port.lock, flags); serial8250_em485_destroy(uart); spin_unlock_irqrestore(&uart->port.lock, flags); } uart_remove_one_port(&serial8250_reg, &uart->port); if (serial8250_isa_devs) { uart->port.flags &= ~UPF_BOOT_AUTOCONF; if (skip_txen_test) uart->port.flags |= UPF_NO_TXEN_TEST; uart->port.type = PORT_UNKNOWN; uart->port.dev = &serial8250_isa_devs->dev; uart->capabilities = 0; uart_add_one_port(&serial8250_reg, &uart->port); } else { uart->port.dev = NULL; } mutex_unlock(&serial_mutex); } EXPORT_SYMBOL(serial8250_unregister_port); static int __init serial8250_init(void) { int ret; if (nr_uarts == 0) return -ENODEV; serial8250_isa_init_ports(); pr_info("Serial: 8250/16550 driver, %d ports, IRQ sharing %sabled\n", nr_uarts, share_irqs ? "en" : "dis"); #ifdef CONFIG_SPARC ret = sunserial_register_minors(&serial8250_reg, UART_NR); #else serial8250_reg.nr = UART_NR; ret = uart_register_driver(&serial8250_reg); #endif if (ret) goto out; ret = serial8250_pnp_init(); if (ret) goto unreg_uart_drv; serial8250_isa_devs = platform_device_alloc("serial8250", PLAT8250_DEV_LEGACY); if (!serial8250_isa_devs) { ret = -ENOMEM; goto unreg_pnp; } ret = platform_device_add(serial8250_isa_devs); if (ret) goto put_dev; serial8250_register_ports(&serial8250_reg, &serial8250_isa_devs->dev); ret = platform_driver_register(&serial8250_isa_driver); if (ret == 0) goto out; platform_device_del(serial8250_isa_devs); put_dev: platform_device_put(serial8250_isa_devs); unreg_pnp: serial8250_pnp_exit(); unreg_uart_drv: #ifdef CONFIG_SPARC sunserial_unregister_minors(&serial8250_reg, UART_NR); #else uart_unregister_driver(&serial8250_reg); #endif out: return ret; } static void __exit serial8250_exit(void) { struct platform_device *isa_dev = serial8250_isa_devs; /* * This tells serial8250_unregister_port() not to re-register * the ports (thereby making serial8250_isa_driver permanently * in use.) */ serial8250_isa_devs = NULL; platform_driver_unregister(&serial8250_isa_driver); platform_device_unregister(isa_dev); serial8250_pnp_exit(); #ifdef CONFIG_SPARC sunserial_unregister_minors(&serial8250_reg, UART_NR); #else uart_unregister_driver(&serial8250_reg); #endif } module_init(serial8250_init); module_exit(serial8250_exit); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Generic 8250/16x50 serial driver"); module_param(share_irqs, uint, 0644); MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices (unsafe)"); module_param(nr_uarts, uint, 0644); MODULE_PARM_DESC(nr_uarts, "Maximum number of UARTs supported. (1-" __MODULE_STRING(CONFIG_SERIAL_8250_NR_UARTS) ")"); module_param(skip_txen_test, uint, 0644); MODULE_PARM_DESC(skip_txen_test, "Skip checking for the TXEN bug at init time"); #ifdef CONFIG_SERIAL_8250_RSA module_param_array(probe_rsa, ulong, &probe_rsa_count, 0444); MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA"); #endif MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR); #ifdef CONFIG_SERIAL_8250_DEPRECATED_OPTIONS #ifndef MODULE /* This module was renamed to 8250_core in 3.7. Keep the old "8250" name * working as well for the module options so we don't break people. We * need to keep the names identical and the convenient macros will happily * refuse to let us do that by failing the build with redefinition errors * of global variables. So we stick them inside a dummy function to avoid * those conflicts. The options still get parsed, and the redefined * MODULE_PARAM_PREFIX lets us keep the "8250." syntax alive. * * This is hacky. I'm sorry. */ static void __used s8250_options(void) { #undef MODULE_PARAM_PREFIX #define MODULE_PARAM_PREFIX "8250_core." module_param_cb(share_irqs, ¶m_ops_uint, &share_irqs, 0644); module_param_cb(nr_uarts, ¶m_ops_uint, &nr_uarts, 0644); module_param_cb(skip_txen_test, ¶m_ops_uint, &skip_txen_test, 0644); #ifdef CONFIG_SERIAL_8250_RSA __module_param_call(MODULE_PARAM_PREFIX, probe_rsa, ¶m_array_ops, .arr = &__param_arr_probe_rsa, 0444, -1, 0); #endif } #else MODULE_ALIAS("8250_core"); #endif #endif