// SPDX-License-Identifier: GPL-2.0-only /* * Interrupt bottom half (BH). * * Copyright (c) 2017-2019, Silicon Laboratories, Inc. * Copyright (c) 2010, ST-Ericsson */ #include #include #include "bh.h" #include "wfx.h" #include "hwio.h" #include "traces.h" #include "secure_link.h" #include "hif_rx.h" #include "hif_api_cmd.h" static void device_wakeup(struct wfx_dev *wdev) { if (!wdev->pdata.gpio_wakeup) return; if (gpiod_get_value(wdev->pdata.gpio_wakeup)) return; gpiod_set_value(wdev->pdata.gpio_wakeup, 1); if (wfx_api_older_than(wdev, 1, 4)) { if (!completion_done(&wdev->hif.ctrl_ready)) udelay(2000); } else { // completion.h does not provide any function to wait // completion without consume it (a kind of // wait_for_completion_done_timeout()). So we have to emulate // it. if (wait_for_completion_timeout(&wdev->hif.ctrl_ready, msecs_to_jiffies(2) + 1)) complete(&wdev->hif.ctrl_ready); else dev_err(wdev->dev, "timeout while wake up chip\n"); } } static void device_release(struct wfx_dev *wdev) { if (!wdev->pdata.gpio_wakeup) return; gpiod_set_value(wdev->pdata.gpio_wakeup, 0); } static int rx_helper(struct wfx_dev *wdev, size_t read_len, int *is_cnf) { struct sk_buff *skb; struct hif_msg *hif; size_t alloc_len; size_t computed_len; int release_count; int piggyback = 0; WARN(read_len < 4, "corrupted read"); WARN(read_len > round_down(0xFFF, 2) * sizeof(u16), "%s: request exceed WFx capability", __func__); // Add 2 to take into account piggyback size alloc_len = wdev->hwbus_ops->align_size(wdev->hwbus_priv, read_len + 2); skb = dev_alloc_skb(alloc_len); if (!skb) return -ENOMEM; if (wfx_data_read(wdev, skb->data, alloc_len)) goto err; piggyback = le16_to_cpup((u16 *)(skb->data + alloc_len - 2)); _trace_piggyback(piggyback, false); hif = (struct hif_msg *)skb->data; WARN(hif->encrypted & 0x1, "unsupported encryption type"); if (hif->encrypted == 0x2) { if (wfx_sl_decode(wdev, (void *)hif)) { dev_kfree_skb(skb); // If frame was a confirmation, expect trouble in next // exchange. However, it is harmless to fail to decode // an indication frame, so try to continue. Anyway, // piggyback is probably correct. return piggyback; } le16_to_cpus(&hif->len); computed_len = round_up(hif->len - sizeof(hif->len), 16) + sizeof(struct hif_sl_msg) + sizeof(struct hif_sl_tag); } else { le16_to_cpus(&hif->len); computed_len = round_up(hif->len, 2); } if (computed_len != read_len) { dev_err(wdev->dev, "inconsistent message length: %zu != %zu\n", computed_len, read_len); print_hex_dump(KERN_INFO, "hif: ", DUMP_PREFIX_OFFSET, 16, 1, hif, read_len, true); goto err; } if (!(hif->id & HIF_ID_IS_INDICATION)) { (*is_cnf)++; if (hif->id == HIF_CNF_ID_MULTI_TRANSMIT) release_count = le32_to_cpu(((struct hif_cnf_multi_transmit *)hif->body)->num_tx_confs); else release_count = 1; WARN(wdev->hif.tx_buffers_used < release_count, "corrupted buffer counter"); wdev->hif.tx_buffers_used -= release_count; if (!wdev->hif.tx_buffers_used) wake_up(&wdev->hif.tx_buffers_empty); } _trace_hif_recv(hif, wdev->hif.tx_buffers_used); if (hif->id != HIF_IND_ID_EXCEPTION && hif->id != HIF_IND_ID_ERROR) { if (hif->seqnum != wdev->hif.rx_seqnum) dev_warn(wdev->dev, "wrong message sequence: %d != %d\n", hif->seqnum, wdev->hif.rx_seqnum); wdev->hif.rx_seqnum = (hif->seqnum + 1) % (HIF_COUNTER_MAX + 1); } skb_put(skb, hif->len); // wfx_handle_rx takes care on SKB livetime wfx_handle_rx(wdev, skb); return piggyback; err: if (skb) dev_kfree_skb(skb); return -EIO; } static int bh_work_rx(struct wfx_dev *wdev, int max_msg, int *num_cnf) { size_t len; int i; int ctrl_reg, piggyback; piggyback = 0; for (i = 0; i < max_msg; i++) { if (piggyback & CTRL_NEXT_LEN_MASK) ctrl_reg = piggyback; else if (try_wait_for_completion(&wdev->hif.ctrl_ready)) ctrl_reg = atomic_xchg(&wdev->hif.ctrl_reg, 0); else ctrl_reg = 0; if (!(ctrl_reg & CTRL_NEXT_LEN_MASK)) return i; // ctrl_reg units are 16bits words len = (ctrl_reg & CTRL_NEXT_LEN_MASK) * 2; piggyback = rx_helper(wdev, len, num_cnf); if (piggyback < 0) return i; if (!(piggyback & CTRL_WLAN_READY)) dev_err(wdev->dev, "unexpected piggyback value: ready bit not set: %04x\n", piggyback); } if (piggyback & CTRL_NEXT_LEN_MASK) { ctrl_reg = atomic_xchg(&wdev->hif.ctrl_reg, piggyback); complete(&wdev->hif.ctrl_ready); if (ctrl_reg) dev_err(wdev->dev, "unexpected IRQ happened: %04x/%04x\n", ctrl_reg, piggyback); } return i; } static void tx_helper(struct wfx_dev *wdev, struct hif_msg *hif) { int ret; void *data; bool is_encrypted = false; size_t len = le16_to_cpu(hif->len); WARN(len < sizeof(*hif), "try to send corrupted data"); hif->seqnum = wdev->hif.tx_seqnum; wdev->hif.tx_seqnum = (wdev->hif.tx_seqnum + 1) % (HIF_COUNTER_MAX + 1); if (wfx_is_secure_command(wdev, hif->id)) { len = round_up(len - sizeof(hif->len), 16) + sizeof(hif->len) + sizeof(struct hif_sl_msg_hdr) + sizeof(struct hif_sl_tag); // AES support encryption in-place. However, mac80211 access to // 802.11 header after frame was sent (to get MAC addresses). // So, keep origin buffer clear. data = kmalloc(len, GFP_KERNEL); if (!data) goto end; is_encrypted = true; ret = wfx_sl_encode(wdev, hif, data); if (ret) goto end; } else { data = hif; } WARN(len > wdev->hw_caps.size_inp_ch_buf, "%s: request exceed WFx capability: %zu > %d\n", __func__, len, wdev->hw_caps.size_inp_ch_buf); len = wdev->hwbus_ops->align_size(wdev->hwbus_priv, len); ret = wfx_data_write(wdev, data, len); if (ret) goto end; wdev->hif.tx_buffers_used++; _trace_hif_send(hif, wdev->hif.tx_buffers_used); end: if (is_encrypted) kfree(data); } static int bh_work_tx(struct wfx_dev *wdev, int max_msg) { struct hif_msg *hif; int i; for (i = 0; i < max_msg; i++) { hif = NULL; if (wdev->hif.tx_buffers_used < wdev->hw_caps.num_inp_ch_bufs) { if (try_wait_for_completion(&wdev->hif_cmd.ready)) { WARN(!mutex_is_locked(&wdev->hif_cmd.lock), "data locking error"); hif = wdev->hif_cmd.buf_send; } else { hif = wfx_tx_queues_get(wdev); } } if (!hif) return i; tx_helper(wdev, hif); } return i; } /* In SDIO mode, it is necessary to make an access to a register to acknowledge * last received message. It could be possible to restrict this acknowledge to * SDIO mode and only if last operation was rx. */ static void ack_sdio_data(struct wfx_dev *wdev) { uint32_t cfg_reg; config_reg_read(wdev, &cfg_reg); if (cfg_reg & 0xFF) { dev_warn(wdev->dev, "chip reports errors: %02x\n", cfg_reg & 0xFF); config_reg_write_bits(wdev, 0xFF, 0x00); } } static void bh_work(struct work_struct *work) { struct wfx_dev *wdev = container_of(work, struct wfx_dev, hif.bh); int stats_req = 0, stats_cnf = 0, stats_ind = 0; bool release_chip = false, last_op_is_rx = false; int num_tx, num_rx; device_wakeup(wdev); do { num_tx = bh_work_tx(wdev, 32); stats_req += num_tx; if (num_tx) last_op_is_rx = false; num_rx = bh_work_rx(wdev, 32, &stats_cnf); stats_ind += num_rx; if (num_rx) last_op_is_rx = true; } while (num_rx || num_tx); stats_ind -= stats_cnf; if (last_op_is_rx) ack_sdio_data(wdev); if (!wdev->hif.tx_buffers_used && !work_pending(work) && !atomic_read(&wdev->scan_in_progress)) { device_release(wdev); release_chip = true; } _trace_bh_stats(stats_ind, stats_req, stats_cnf, wdev->hif.tx_buffers_used, release_chip); } /* * An IRQ from chip did occur */ void wfx_bh_request_rx(struct wfx_dev *wdev) { u32 cur, prev; control_reg_read(wdev, &cur); prev = atomic_xchg(&wdev->hif.ctrl_reg, cur); complete(&wdev->hif.ctrl_ready); queue_work(system_highpri_wq, &wdev->hif.bh); if (!(cur & CTRL_NEXT_LEN_MASK)) dev_err(wdev->dev, "unexpected control register value: length field is 0: %04x\n", cur); if (prev != 0) dev_err(wdev->dev, "received IRQ but previous data was not (yet) read: %04x/%04x\n", prev, cur); } /* * Driver want to send data */ void wfx_bh_request_tx(struct wfx_dev *wdev) { queue_work(system_highpri_wq, &wdev->hif.bh); } void wfx_bh_register(struct wfx_dev *wdev) { INIT_WORK(&wdev->hif.bh, bh_work); init_completion(&wdev->hif.ctrl_ready); init_waitqueue_head(&wdev->hif.tx_buffers_empty); } void wfx_bh_unregister(struct wfx_dev *wdev) { flush_work(&wdev->hif.bh); }