/*----- < smil.h> ----------------------------------------------------*/ #ifndef SMIL_INCD #define SMIL_INCD /*************************************************************************** Define Definition ***************************************************************************/ #define K_BYTE 1024 /* Kilo Byte */ #define SECTSIZE 512 /* Sector buffer size */ #define REDTSIZE 16 /* Redundant buffer size */ /***************************************************************************/ #define DUMMY_DATA 0xFF /* No Assign Sector Read Data */ /*************************************************************************** Max Zone/Block/Sectors Data Definition ***************************************************************************/ #define MAX_ZONENUM 128 /* Max Zone Numbers in a SmartMedia */ #define MAX_BLOCKNUM 0x0400 /* Max Block Numbers in a Zone */ #define MAX_SECTNUM 0x20 /* Max Sector Numbers in a Block */ #define MAX_LOGBLOCK 1000 /* Max Logical Block Numbers in a Zone */ /***************************************************************************/ #define CIS_SEARCH_SECT 0x08 /* Max CIS Search Sector Number */ /*************************************************************************** Logical to Physical Block Table Data Definition ***************************************************************************/ #define NO_ASSIGN 0xFFFF /* No Assign Logical Block Address */ /*************************************************************************** 'SectCopyMode' Data ***************************************************************************/ #define COMPLETED 0 /* Sector Copy Completed */ #define REQ_ERASE 1 /* Request Read Block Erase */ #define REQ_FAIL 2 /* Request Read Block Failed */ /*************************************************************************** Retry Counter Definition ***************************************************************************/ #define RDERR_REASSIGN 1 /* Reassign with Read Error */ #define L2P_ERR_ERASE 1 /* BlockErase for Contradicted L2P Table */ /*************************************************************************** Hardware ECC Definition ***************************************************************************/ #define HW_ECC_SUPPORTED 1 /* Hardware ECC Supported */ /* No definition for Software ECC */ /*************************************************************************** SmartMedia Command & Status Definition ***************************************************************************/ /* SmartMedia Command */ #define WRDATA 0x80 /* #define READ 0x00 */ #define READ_REDT 0x50 /* #define WRITE 0x10 */ #define RDSTATUS 0x70 #define READ1 0x00 /* NO */ #define READ2 0x01 /* NO */ #define READ3 0x50 /* NO */ #define RST_CHIP 0xFF #define ERASE1 0x60 #define ERASE2 0xD0 #define READ_ID_1 0x90 #define READ_ID_2 0x91 #define READ_ID_3 0x9A /* 712 SmartMedia Command */ #define SM_CMD_RESET 0x00 /* 0xFF */ #define SM_CMD_READ_ID_1 0x10 /* 0x90 */ #define SM_CMD_READ_ID_2 0x20 /* 0x91 */ #define SM_CMD_READ_STAT 0x30 /* 0x70 */ #define SM_CMD_RDMULTPL_STAT 0x40 /* 0x71 */ #define SM_CMD_READ_1 0x50 /* 0x00 */ #define SM_CMD_READ_2 0x60 /* 0x01 */ #define SM_CMD_READ_3 0x70 /* 0x50 */ #define SM_CMD_PAGPRGM_TRUE 0x80 /* {0x80, 0x10} */ #define SM_CMD_PAGPRGM_DUMY 0x90 /* {0x80, 0x11} */ #define SM_CMD_PAGPRGM_MBLK 0xA0 /* {0x80, 0x15} */ #define SM_CMD_BLKERASE 0xB0 /* {0x60, 0xD0} */ #define SM_CMD_BLKERASE_MULTPL 0xC0 /* {0x60-0x60, 0xD0} */ #define SM_CRADDTCT_DEBNCETIMER_EN 0x02 #define SM_CMD_START_BIT 0x01 #define SM_WaitCmdDone { while (!SM_CmdDone); } #define SM_WaitDmaDone { while (!SM_DmaDone); } /* SmartMedia Status */ #define WR_FAIL 0x01 /* 0:Pass, 1:Fail */ #define SUSPENDED 0x20 /* 0:Not Suspended, 1:Suspended */ #define READY 0x40 /* 0:Busy, 1:Ready */ #define WR_PRTCT 0x80 /* 0:Protect, 1:Not Protect */ /* SmartMedia Busy Time (1bit:0.1ms) */ #define BUSY_PROG 200 /* tPROG : 20ms ----- Program Time old : 200 */ #define BUSY_ERASE 4000 /* tBERASE : 400ms ----- Block Erase Time old : 4000 */ /*for 712 Test */ /* #define BUSY_READ 1 *//* tR : 100us ----- Data transfer Time old : 1 */ /* #define BUSY_READ 10 *//* tR : 100us ----- Data transfer Time old : 1 */ #define BUSY_READ 200 /* tR : 20ms ----- Data transfer Time old : 1 */ /* #define BUSY_RESET 60 *//* tRST : 6ms ----- Device Resetting Time old : 60 */ #define BUSY_RESET 600 /* tRST : 60ms ----- Device Resetting Time old : 60 */ /* Hardware Timer (1bit:0.1ms) */ #define TIME_PON 3000 /* 300ms ------ Power On Wait Time */ #define TIME_CDCHK 200 /* 20ms ------ Card Check Interval Timer */ #define TIME_WPCHK 50 /* 5ms ------ WP Check Interval Timer */ #define TIME_5VCHK 10 /* 1ms ------ 5V Check Interval Timer */ /*************************************************************************** Redundant Data ***************************************************************************/ #define REDT_DATA 0x04 #define REDT_BLOCK 0x05 #define REDT_ADDR1H 0x06 #define REDT_ADDR1L 0x07 #define REDT_ADDR2H 0x0B #define REDT_ADDR2L 0x0C #define REDT_ECC10 0x0D #define REDT_ECC11 0x0E #define REDT_ECC12 0x0F #define REDT_ECC20 0x08 #define REDT_ECC21 0x09 #define REDT_ECC22 0x0A /*************************************************************************** SmartMedia Model & Attribute ***************************************************************************/ /* SmartMedia Attribute */ #define NOWP 0x00 /* 0... .... No Write Protect */ #define WP 0x80 /* 1... .... Write Protected */ #define MASK 0x00 /* .00. .... NAND MASK ROM Model */ #define FLASH 0x20 /* .01. .... NAND Flash ROM Model */ #define AD3CYC 0x00 /* ...0 .... Address 3-cycle */ #define AD4CYC 0x10 /* ...1 .... Address 4-cycle */ #define BS16 0x00 /* .... 00.. 16page/block */ #define BS32 0x04 /* .... 01.. 32page/block */ #define PS256 0x00 /* .... ..00 256byte/page */ #define PS512 0x01 /* .... ..01 512byte/page */ #define MWP 0x80 /* WriteProtect mask */ #define MFLASH 0x60 /* Flash Rom mask */ #define MADC 0x10 /* Address Cycle */ #define MBS 0x0C /* BlockSize mask */ #define MPS 0x03 /* PageSize mask */ /* SmartMedia Model */ #define NOSSFDC 0x00 /* NO SmartMedia */ #define SSFDC1MB 0x01 /* 1MB SmartMedia */ #define SSFDC2MB 0x02 /* 2MB SmartMedia */ #define SSFDC4MB 0x03 /* 4MB SmartMedia */ #define SSFDC8MB 0x04 /* 8MB SmartMedia */ #define SSFDC16MB 0x05 /* 16MB SmartMedia */ #define SSFDC32MB 0x06 /* 32MB SmartMedia */ #define SSFDC64MB 0x07 /* 64MB SmartMedia */ #define SSFDC128MB 0x08 /*128MB SmartMedia */ #define SSFDC256MB 0x09 #define SSFDC512MB 0x0A #define SSFDC1GB 0x0B #define SSFDC2GB 0x0C /*************************************************************************** Struct Definition ***************************************************************************/ struct keucr_media_info { u8 Model; u8 Attribute; u8 MaxZones; u8 MaxSectors; u16 MaxBlocks; u16 MaxLogBlocks; }; struct keucr_media_address { u8 Zone; /* Zone Number */ u8 Sector; /* Sector(512byte) Number on Block */ u16 PhyBlock; /* Physical Block Number on Zone */ u16 LogBlock; /* Logical Block Number of Zone */ }; struct keucr_media_area { u8 Sector; /* Sector(512byte) Number on Block */ u16 PhyBlock; /* Physical Block Number on Zone 0 */ }; extern u16 ReadBlock; extern u16 WriteBlock; extern u32 MediaChange; extern struct keucr_media_info Ssfdc; extern struct keucr_media_address Media; extern struct keucr_media_area CisArea; /* * SMILMain.c */ /******************************************/ int Init_D_SmartMedia(void); int Pwoff_D_SmartMedia(void); int Check_D_SmartMedia(void); int Check_D_Parameter(struct us_data *, u16 *, u8 *, u8 *); int Media_D_ReadSector(struct us_data *, u32, u16, u8 *); int Media_D_WriteSector(struct us_data *, u32, u16, u8 *); int Media_D_CopySector(struct us_data *, u32, u16, u8 *); int Media_D_EraseBlock(struct us_data *, u32, u16); int Media_D_EraseAll(struct us_data *); /******************************************/ int Media_D_OneSectWriteStart(struct us_data *, u32, u8 *); int Media_D_OneSectWriteNext(struct us_data *, u8 *); int Media_D_OneSectWriteFlush(struct us_data *); /******************************************/ extern int SM_FreeMem(void); /* ENE SM function */ void SM_EnableLED(struct us_data *, bool); void Led_D_TernOn(void); void Led_D_TernOff(void); int Media_D_EraseAllRedtData(u32 Index, bool CheckBlock); /*DWORD Media_D_GetMediaInfo(struct us_data * fdoExt, PIOCTL_MEDIA_INFO_IN pParamIn, PIOCTL_MEDIA_INFO_OUT pParamOut); */ /* * SMILSub.c */ /******************************************/ int Check_D_DataBlank(u8 *); int Check_D_FailBlock(u8 *); int Check_D_DataStatus(u8 *); int Load_D_LogBlockAddr(u8 *); void Clr_D_RedundantData(u8 *); void Set_D_LogBlockAddr(u8 *); void Set_D_FailBlock(u8 *); void Set_D_DataStaus(u8 *); /******************************************/ void Ssfdc_D_Reset(struct us_data *); int Ssfdc_D_ReadCisSect(struct us_data *, u8 *, u8 *); void Ssfdc_D_WriteRedtMode(void); void Ssfdc_D_ReadID(u8 *, u8); int Ssfdc_D_ReadSect(struct us_data *, u8 *, u8 *); int Ssfdc_D_ReadBlock(struct us_data *, u16, u8 *, u8 *); int Ssfdc_D_WriteSect(struct us_data *, u8 *, u8 *); int Ssfdc_D_WriteBlock(struct us_data *, u16, u8 *, u8 *); int Ssfdc_D_CopyBlock(struct us_data *, u16, u8 *, u8 *); int Ssfdc_D_WriteSectForCopy(struct us_data *, u8 *, u8 *); int Ssfdc_D_EraseBlock(struct us_data *); int Ssfdc_D_ReadRedtData(struct us_data *, u8 *); int Ssfdc_D_WriteRedtData(struct us_data *, u8 *); int Ssfdc_D_CheckStatus(void); int Set_D_SsfdcModel(u8); void Cnt_D_Reset(void); int Cnt_D_PowerOn(void); void Cnt_D_PowerOff(void); void Cnt_D_LedOn(void); void Cnt_D_LedOff(void); int Check_D_CntPower(void); int Check_D_CardExist(void); int Check_D_CardStsChg(void); int Check_D_SsfdcWP(void); int SM_ReadBlock(struct us_data *, u8 *, u8 *); int Ssfdc_D_ReadSect_DMA(struct us_data *, u8 *, u8 *); int Ssfdc_D_ReadSect_PIO(struct us_data *, u8 *, u8 *); int Ssfdc_D_WriteSect_DMA(struct us_data *, u8 *, u8 *); int Ssfdc_D_WriteSect_PIO(struct us_data *, u8 *, u8 *); /******************************************/ int Check_D_ReadError(u8 *); int Check_D_Correct(u8 *, u8 *); int Check_D_CISdata(u8 *, u8 *); void Set_D_RightECC(u8 *); /* * SMILECC.c */ void calculate_ecc(u8 *, u8 *, u8 *, u8 *, u8 *); u8 correct_data(u8 *, u8 *, u8, u8, u8); int _Correct_D_SwECC(u8 *, u8 *, u8 *); void _Calculate_D_SwECC(u8 *, u8 *); void SM_Init(void); #endif /* already included */