// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) 2013-2016, Linux Foundation. All rights reserved. */ #include #include #include #include #include #include #include #include "ufshcd.h" #include "ufshcd-pltfrm.h" #include "unipro.h" #include "ufs-qcom.h" #include "ufshci.h" #include "ufs_quirks.h" #define UFS_QCOM_DEFAULT_DBG_PRINT_EN \ (UFS_QCOM_DBG_PRINT_REGS_EN | UFS_QCOM_DBG_PRINT_TEST_BUS_EN) enum { TSTBUS_UAWM, TSTBUS_UARM, TSTBUS_TXUC, TSTBUS_RXUC, TSTBUS_DFC, TSTBUS_TRLUT, TSTBUS_TMRLUT, TSTBUS_OCSC, TSTBUS_UTP_HCI, TSTBUS_COMBINED, TSTBUS_WRAPPER, TSTBUS_UNIPRO, TSTBUS_MAX, }; static struct ufs_qcom_host *ufs_qcom_hosts[MAX_UFS_QCOM_HOSTS]; static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host); static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba, u32 clk_cycles); static struct ufs_qcom_host *rcdev_to_ufs_host(struct reset_controller_dev *rcd) { return container_of(rcd, struct ufs_qcom_host, rcdev); } static void ufs_qcom_dump_regs_wrapper(struct ufs_hba *hba, int offset, int len, const char *prefix, void *priv) { ufshcd_dump_regs(hba, offset, len * 4, prefix); } static int ufs_qcom_get_connected_tx_lanes(struct ufs_hba *hba, u32 *tx_lanes) { int err = 0; err = ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES), tx_lanes); if (err) dev_err(hba->dev, "%s: couldn't read PA_CONNECTEDTXDATALANES %d\n", __func__, err); return err; } static int ufs_qcom_host_clk_get(struct device *dev, const char *name, struct clk **clk_out, bool optional) { struct clk *clk; int err = 0; clk = devm_clk_get(dev, name); if (!IS_ERR(clk)) { *clk_out = clk; return 0; } err = PTR_ERR(clk); if (optional && err == -ENOENT) { *clk_out = NULL; return 0; } if (err != -EPROBE_DEFER) dev_err(dev, "failed to get %s err %d\n", name, err); return err; } static int ufs_qcom_host_clk_enable(struct device *dev, const char *name, struct clk *clk) { int err = 0; err = clk_prepare_enable(clk); if (err) dev_err(dev, "%s: %s enable failed %d\n", __func__, name, err); return err; } static void ufs_qcom_disable_lane_clks(struct ufs_qcom_host *host) { if (!host->is_lane_clks_enabled) return; clk_disable_unprepare(host->tx_l1_sync_clk); clk_disable_unprepare(host->tx_l0_sync_clk); clk_disable_unprepare(host->rx_l1_sync_clk); clk_disable_unprepare(host->rx_l0_sync_clk); host->is_lane_clks_enabled = false; } static int ufs_qcom_enable_lane_clks(struct ufs_qcom_host *host) { int err = 0; struct device *dev = host->hba->dev; if (host->is_lane_clks_enabled) return 0; err = ufs_qcom_host_clk_enable(dev, "rx_lane0_sync_clk", host->rx_l0_sync_clk); if (err) goto out; err = ufs_qcom_host_clk_enable(dev, "tx_lane0_sync_clk", host->tx_l0_sync_clk); if (err) goto disable_rx_l0; err = ufs_qcom_host_clk_enable(dev, "rx_lane1_sync_clk", host->rx_l1_sync_clk); if (err) goto disable_tx_l0; err = ufs_qcom_host_clk_enable(dev, "tx_lane1_sync_clk", host->tx_l1_sync_clk); if (err) goto disable_rx_l1; host->is_lane_clks_enabled = true; goto out; disable_rx_l1: clk_disable_unprepare(host->rx_l1_sync_clk); disable_tx_l0: clk_disable_unprepare(host->tx_l0_sync_clk); disable_rx_l0: clk_disable_unprepare(host->rx_l0_sync_clk); out: return err; } static int ufs_qcom_init_lane_clks(struct ufs_qcom_host *host) { int err = 0; struct device *dev = host->hba->dev; if (has_acpi_companion(dev)) return 0; err = ufs_qcom_host_clk_get(dev, "rx_lane0_sync_clk", &host->rx_l0_sync_clk, false); if (err) goto out; err = ufs_qcom_host_clk_get(dev, "tx_lane0_sync_clk", &host->tx_l0_sync_clk, false); if (err) goto out; /* In case of single lane per direction, don't read lane1 clocks */ if (host->hba->lanes_per_direction > 1) { err = ufs_qcom_host_clk_get(dev, "rx_lane1_sync_clk", &host->rx_l1_sync_clk, false); if (err) goto out; err = ufs_qcom_host_clk_get(dev, "tx_lane1_sync_clk", &host->tx_l1_sync_clk, true); } out: return err; } static int ufs_qcom_link_startup_post_change(struct ufs_hba *hba) { u32 tx_lanes; return ufs_qcom_get_connected_tx_lanes(hba, &tx_lanes); } static int ufs_qcom_check_hibern8(struct ufs_hba *hba) { int err; u32 tx_fsm_val = 0; unsigned long timeout = jiffies + msecs_to_jiffies(HBRN8_POLL_TOUT_MS); do { err = ufshcd_dme_get(hba, UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE, UIC_ARG_MPHY_TX_GEN_SEL_INDEX(0)), &tx_fsm_val); if (err || tx_fsm_val == TX_FSM_HIBERN8) break; /* sleep for max. 200us */ usleep_range(100, 200); } while (time_before(jiffies, timeout)); /* * we might have scheduled out for long during polling so * check the state again. */ if (time_after(jiffies, timeout)) err = ufshcd_dme_get(hba, UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE, UIC_ARG_MPHY_TX_GEN_SEL_INDEX(0)), &tx_fsm_val); if (err) { dev_err(hba->dev, "%s: unable to get TX_FSM_STATE, err %d\n", __func__, err); } else if (tx_fsm_val != TX_FSM_HIBERN8) { err = tx_fsm_val; dev_err(hba->dev, "%s: invalid TX_FSM_STATE = %d\n", __func__, err); } return err; } static void ufs_qcom_select_unipro_mode(struct ufs_qcom_host *host) { ufshcd_rmwl(host->hba, QUNIPRO_SEL, ufs_qcom_cap_qunipro(host) ? QUNIPRO_SEL : 0, REG_UFS_CFG1); /* make sure above configuration is applied before we return */ mb(); } /** * ufs_qcom_host_reset - reset host controller and PHY */ static int ufs_qcom_host_reset(struct ufs_hba *hba) { int ret = 0; struct ufs_qcom_host *host = ufshcd_get_variant(hba); if (!host->core_reset) { dev_warn(hba->dev, "%s: reset control not set\n", __func__); goto out; } ret = reset_control_assert(host->core_reset); if (ret) { dev_err(hba->dev, "%s: core_reset assert failed, err = %d\n", __func__, ret); goto out; } /* * The hardware requirement for delay between assert/deassert * is at least 3-4 sleep clock (32.7KHz) cycles, which comes to * ~125us (4/32768). To be on the safe side add 200us delay. */ usleep_range(200, 210); ret = reset_control_deassert(host->core_reset); if (ret) dev_err(hba->dev, "%s: core_reset deassert failed, err = %d\n", __func__, ret); usleep_range(1000, 1100); out: return ret; } static int ufs_qcom_power_up_sequence(struct ufs_hba *hba) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); struct phy *phy = host->generic_phy; int ret = 0; bool is_rate_B = (UFS_QCOM_LIMIT_HS_RATE == PA_HS_MODE_B) ? true : false; /* Reset UFS Host Controller and PHY */ ret = ufs_qcom_host_reset(hba); if (ret) dev_warn(hba->dev, "%s: host reset returned %d\n", __func__, ret); if (is_rate_B) phy_set_mode(phy, PHY_MODE_UFS_HS_B); /* phy initialization - calibrate the phy */ ret = phy_init(phy); if (ret) { dev_err(hba->dev, "%s: phy init failed, ret = %d\n", __func__, ret); goto out; } /* power on phy - start serdes and phy's power and clocks */ ret = phy_power_on(phy); if (ret) { dev_err(hba->dev, "%s: phy power on failed, ret = %d\n", __func__, ret); goto out_disable_phy; } ufs_qcom_select_unipro_mode(host); return 0; out_disable_phy: phy_exit(phy); out: return ret; } /* * The UTP controller has a number of internal clock gating cells (CGCs). * Internal hardware sub-modules within the UTP controller control the CGCs. * Hardware CGCs disable the clock to inactivate UTP sub-modules not involved * in a specific operation, UTP controller CGCs are by default disabled and * this function enables them (after every UFS link startup) to save some power * leakage. */ static void ufs_qcom_enable_hw_clk_gating(struct ufs_hba *hba) { ufshcd_writel(hba, ufshcd_readl(hba, REG_UFS_CFG2) | REG_UFS_CFG2_CGC_EN_ALL, REG_UFS_CFG2); /* Ensure that HW clock gating is enabled before next operations */ mb(); } static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba, enum ufs_notify_change_status status) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); int err = 0; switch (status) { case PRE_CHANGE: ufs_qcom_power_up_sequence(hba); /* * The PHY PLL output is the source of tx/rx lane symbol * clocks, hence, enable the lane clocks only after PHY * is initialized. */ err = ufs_qcom_enable_lane_clks(host); break; case POST_CHANGE: /* check if UFS PHY moved from DISABLED to HIBERN8 */ err = ufs_qcom_check_hibern8(hba); ufs_qcom_enable_hw_clk_gating(hba); break; default: dev_err(hba->dev, "%s: invalid status %d\n", __func__, status); err = -EINVAL; break; } return err; } /** * Returns zero for success and non-zero in case of a failure */ static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear, u32 hs, u32 rate, bool update_link_startup_timer) { int ret = 0; struct ufs_qcom_host *host = ufshcd_get_variant(hba); struct ufs_clk_info *clki; u32 core_clk_period_in_ns; u32 tx_clk_cycles_per_us = 0; unsigned long core_clk_rate = 0; u32 core_clk_cycles_per_us = 0; static u32 pwm_fr_table[][2] = { {UFS_PWM_G1, 0x1}, {UFS_PWM_G2, 0x1}, {UFS_PWM_G3, 0x1}, {UFS_PWM_G4, 0x1}, }; static u32 hs_fr_table_rA[][2] = { {UFS_HS_G1, 0x1F}, {UFS_HS_G2, 0x3e}, {UFS_HS_G3, 0x7D}, }; static u32 hs_fr_table_rB[][2] = { {UFS_HS_G1, 0x24}, {UFS_HS_G2, 0x49}, {UFS_HS_G3, 0x92}, }; /* * The Qunipro controller does not use following registers: * SYS1CLK_1US_REG, TX_SYMBOL_CLK_1US_REG, CLK_NS_REG & * UFS_REG_PA_LINK_STARTUP_TIMER * But UTP controller uses SYS1CLK_1US_REG register for Interrupt * Aggregation logic. */ if (ufs_qcom_cap_qunipro(host) && !ufshcd_is_intr_aggr_allowed(hba)) goto out; if (gear == 0) { dev_err(hba->dev, "%s: invalid gear = %d\n", __func__, gear); goto out_error; } list_for_each_entry(clki, &hba->clk_list_head, list) { if (!strcmp(clki->name, "core_clk")) core_clk_rate = clk_get_rate(clki->clk); } /* If frequency is smaller than 1MHz, set to 1MHz */ if (core_clk_rate < DEFAULT_CLK_RATE_HZ) core_clk_rate = DEFAULT_CLK_RATE_HZ; core_clk_cycles_per_us = core_clk_rate / USEC_PER_SEC; if (ufshcd_readl(hba, REG_UFS_SYS1CLK_1US) != core_clk_cycles_per_us) { ufshcd_writel(hba, core_clk_cycles_per_us, REG_UFS_SYS1CLK_1US); /* * make sure above write gets applied before we return from * this function. */ mb(); } if (ufs_qcom_cap_qunipro(host)) goto out; core_clk_period_in_ns = NSEC_PER_SEC / core_clk_rate; core_clk_period_in_ns <<= OFFSET_CLK_NS_REG; core_clk_period_in_ns &= MASK_CLK_NS_REG; switch (hs) { case FASTAUTO_MODE: case FAST_MODE: if (rate == PA_HS_MODE_A) { if (gear > ARRAY_SIZE(hs_fr_table_rA)) { dev_err(hba->dev, "%s: index %d exceeds table size %zu\n", __func__, gear, ARRAY_SIZE(hs_fr_table_rA)); goto out_error; } tx_clk_cycles_per_us = hs_fr_table_rA[gear-1][1]; } else if (rate == PA_HS_MODE_B) { if (gear > ARRAY_SIZE(hs_fr_table_rB)) { dev_err(hba->dev, "%s: index %d exceeds table size %zu\n", __func__, gear, ARRAY_SIZE(hs_fr_table_rB)); goto out_error; } tx_clk_cycles_per_us = hs_fr_table_rB[gear-1][1]; } else { dev_err(hba->dev, "%s: invalid rate = %d\n", __func__, rate); goto out_error; } break; case SLOWAUTO_MODE: case SLOW_MODE: if (gear > ARRAY_SIZE(pwm_fr_table)) { dev_err(hba->dev, "%s: index %d exceeds table size %zu\n", __func__, gear, ARRAY_SIZE(pwm_fr_table)); goto out_error; } tx_clk_cycles_per_us = pwm_fr_table[gear-1][1]; break; case UNCHANGED: default: dev_err(hba->dev, "%s: invalid mode = %d\n", __func__, hs); goto out_error; } if (ufshcd_readl(hba, REG_UFS_TX_SYMBOL_CLK_NS_US) != (core_clk_period_in_ns | tx_clk_cycles_per_us)) { /* this register 2 fields shall be written at once */ ufshcd_writel(hba, core_clk_period_in_ns | tx_clk_cycles_per_us, REG_UFS_TX_SYMBOL_CLK_NS_US); /* * make sure above write gets applied before we return from * this function. */ mb(); } if (update_link_startup_timer) { ufshcd_writel(hba, ((core_clk_rate / MSEC_PER_SEC) * 100), REG_UFS_PA_LINK_STARTUP_TIMER); /* * make sure that this configuration is applied before * we return */ mb(); } goto out; out_error: ret = -EINVAL; out: return ret; } static int ufs_qcom_link_startup_notify(struct ufs_hba *hba, enum ufs_notify_change_status status) { int err = 0; struct ufs_qcom_host *host = ufshcd_get_variant(hba); switch (status) { case PRE_CHANGE: if (ufs_qcom_cfg_timers(hba, UFS_PWM_G1, SLOWAUTO_MODE, 0, true)) { dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n", __func__); err = -EINVAL; goto out; } if (ufs_qcom_cap_qunipro(host)) /* * set unipro core clock cycles to 150 & clear clock * divider */ err = ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba, 150); /* * Some UFS devices (and may be host) have issues if LCC is * enabled. So we are setting PA_Local_TX_LCC_Enable to 0 * before link startup which will make sure that both host * and device TX LCC are disabled once link startup is * completed. */ if (ufshcd_get_local_unipro_ver(hba) != UFS_UNIPRO_VER_1_41) err = ufshcd_disable_host_tx_lcc(hba); break; case POST_CHANGE: ufs_qcom_link_startup_post_change(hba); break; default: break; } out: return err; } static int ufs_qcom_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); struct phy *phy = host->generic_phy; int ret = 0; if (ufs_qcom_is_link_off(hba)) { /* * Disable the tx/rx lane symbol clocks before PHY is * powered down as the PLL source should be disabled * after downstream clocks are disabled. */ ufs_qcom_disable_lane_clks(host); phy_power_off(phy); } else if (!ufs_qcom_is_link_active(hba)) { ufs_qcom_disable_lane_clks(host); } return ret; } static int ufs_qcom_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); struct phy *phy = host->generic_phy; int err; if (ufs_qcom_is_link_off(hba)) { err = phy_power_on(phy); if (err) { dev_err(hba->dev, "%s: failed PHY power on: %d\n", __func__, err); return err; } err = ufs_qcom_enable_lane_clks(host); if (err) return err; } else if (!ufs_qcom_is_link_active(hba)) { err = ufs_qcom_enable_lane_clks(host); if (err) return err; } hba->is_sys_suspended = false; return 0; } #ifdef CONFIG_MSM_BUS_SCALING static int ufs_qcom_get_bus_vote(struct ufs_qcom_host *host, const char *speed_mode) { struct device *dev = host->hba->dev; struct device_node *np = dev->of_node; int err; const char *key = "qcom,bus-vector-names"; if (!speed_mode) { err = -EINVAL; goto out; } if (host->bus_vote.is_max_bw_needed && !!strcmp(speed_mode, "MIN")) err = of_property_match_string(np, key, "MAX"); else err = of_property_match_string(np, key, speed_mode); out: if (err < 0) dev_err(dev, "%s: Invalid %s mode %d\n", __func__, speed_mode, err); return err; } static void ufs_qcom_get_speed_mode(struct ufs_pa_layer_attr *p, char *result) { int gear = max_t(u32, p->gear_rx, p->gear_tx); int lanes = max_t(u32, p->lane_rx, p->lane_tx); int pwr; /* default to PWM Gear 1, Lane 1 if power mode is not initialized */ if (!gear) gear = 1; if (!lanes) lanes = 1; if (!p->pwr_rx && !p->pwr_tx) { pwr = SLOWAUTO_MODE; snprintf(result, BUS_VECTOR_NAME_LEN, "MIN"); } else if (p->pwr_rx == FAST_MODE || p->pwr_rx == FASTAUTO_MODE || p->pwr_tx == FAST_MODE || p->pwr_tx == FASTAUTO_MODE) { pwr = FAST_MODE; snprintf(result, BUS_VECTOR_NAME_LEN, "%s_R%s_G%d_L%d", "HS", p->hs_rate == PA_HS_MODE_B ? "B" : "A", gear, lanes); } else { pwr = SLOW_MODE; snprintf(result, BUS_VECTOR_NAME_LEN, "%s_G%d_L%d", "PWM", gear, lanes); } } static int __ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote) { int err = 0; if (vote != host->bus_vote.curr_vote) { err = msm_bus_scale_client_update_request( host->bus_vote.client_handle, vote); if (err) { dev_err(host->hba->dev, "%s: msm_bus_scale_client_update_request() failed: bus_client_handle=0x%x, vote=%d, err=%d\n", __func__, host->bus_vote.client_handle, vote, err); goto out; } host->bus_vote.curr_vote = vote; } out: return err; } static int ufs_qcom_update_bus_bw_vote(struct ufs_qcom_host *host) { int vote; int err = 0; char mode[BUS_VECTOR_NAME_LEN]; ufs_qcom_get_speed_mode(&host->dev_req_params, mode); vote = ufs_qcom_get_bus_vote(host, mode); if (vote >= 0) err = __ufs_qcom_set_bus_vote(host, vote); else err = vote; if (err) dev_err(host->hba->dev, "%s: failed %d\n", __func__, err); else host->bus_vote.saved_vote = vote; return err; } static int ufs_qcom_set_bus_vote(struct ufs_hba *hba, bool on) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); int vote, err; /* * In case ufs_qcom_init() is not yet done, simply ignore. * This ufs_qcom_set_bus_vote() shall be called from * ufs_qcom_init() after init is done. */ if (!host) return 0; if (on) { vote = host->bus_vote.saved_vote; if (vote == host->bus_vote.min_bw_vote) ufs_qcom_update_bus_bw_vote(host); } else { vote = host->bus_vote.min_bw_vote; } err = __ufs_qcom_set_bus_vote(host, vote); if (err) dev_err(hba->dev, "%s: set bus vote failed %d\n", __func__, err); return err; } static ssize_t show_ufs_to_mem_max_bus_bw(struct device *dev, struct device_attribute *attr, char *buf) { struct ufs_hba *hba = dev_get_drvdata(dev); struct ufs_qcom_host *host = ufshcd_get_variant(hba); return snprintf(buf, PAGE_SIZE, "%u\n", host->bus_vote.is_max_bw_needed); } static ssize_t store_ufs_to_mem_max_bus_bw(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct ufs_hba *hba = dev_get_drvdata(dev); struct ufs_qcom_host *host = ufshcd_get_variant(hba); uint32_t value; if (!kstrtou32(buf, 0, &value)) { host->bus_vote.is_max_bw_needed = !!value; ufs_qcom_update_bus_bw_vote(host); } return count; } static int ufs_qcom_bus_register(struct ufs_qcom_host *host) { int err; struct msm_bus_scale_pdata *bus_pdata; struct device *dev = host->hba->dev; struct platform_device *pdev = to_platform_device(dev); struct device_node *np = dev->of_node; bus_pdata = msm_bus_cl_get_pdata(pdev); if (!bus_pdata) { dev_err(dev, "%s: failed to get bus vectors\n", __func__); err = -ENODATA; goto out; } err = of_property_count_strings(np, "qcom,bus-vector-names"); if (err < 0 || err != bus_pdata->num_usecases) { dev_err(dev, "%s: qcom,bus-vector-names not specified correctly %d\n", __func__, err); goto out; } host->bus_vote.client_handle = msm_bus_scale_register_client(bus_pdata); if (!host->bus_vote.client_handle) { dev_err(dev, "%s: msm_bus_scale_register_client failed\n", __func__); err = -EFAULT; goto out; } /* cache the vote index for minimum and maximum bandwidth */ host->bus_vote.min_bw_vote = ufs_qcom_get_bus_vote(host, "MIN"); host->bus_vote.max_bw_vote = ufs_qcom_get_bus_vote(host, "MAX"); host->bus_vote.max_bus_bw.show = show_ufs_to_mem_max_bus_bw; host->bus_vote.max_bus_bw.store = store_ufs_to_mem_max_bus_bw; sysfs_attr_init(&host->bus_vote.max_bus_bw.attr); host->bus_vote.max_bus_bw.attr.name = "max_bus_bw"; host->bus_vote.max_bus_bw.attr.mode = S_IRUGO | S_IWUSR; err = device_create_file(dev, &host->bus_vote.max_bus_bw); out: return err; } #else /* CONFIG_MSM_BUS_SCALING */ static int ufs_qcom_update_bus_bw_vote(struct ufs_qcom_host *host) { return 0; } static int ufs_qcom_set_bus_vote(struct ufs_hba *host, bool on) { return 0; } static int ufs_qcom_bus_register(struct ufs_qcom_host *host) { return 0; } #endif /* CONFIG_MSM_BUS_SCALING */ static void ufs_qcom_dev_ref_clk_ctrl(struct ufs_qcom_host *host, bool enable) { if (host->dev_ref_clk_ctrl_mmio && (enable ^ host->is_dev_ref_clk_enabled)) { u32 temp = readl_relaxed(host->dev_ref_clk_ctrl_mmio); if (enable) temp |= host->dev_ref_clk_en_mask; else temp &= ~host->dev_ref_clk_en_mask; /* * If we are here to disable this clock it might be immediately * after entering into hibern8 in which case we need to make * sure that device ref_clk is active for specific time after * hibern8 enter. */ if (!enable) { unsigned long gating_wait; gating_wait = host->hba->dev_info.clk_gating_wait_us; if (!gating_wait) { udelay(1); } else { /* * bRefClkGatingWaitTime defines the minimum * time for which the reference clock is * required by device during transition from * HS-MODE to LS-MODE or HIBERN8 state. Give it * more delay to be on the safe side. */ gating_wait += 10; usleep_range(gating_wait, gating_wait + 10); } } writel_relaxed(temp, host->dev_ref_clk_ctrl_mmio); /* ensure that ref_clk is enabled/disabled before we return */ wmb(); /* * If we call hibern8 exit after this, we need to make sure that * device ref_clk is stable for at least 1us before the hibern8 * exit command. */ if (enable) udelay(1); host->is_dev_ref_clk_enabled = enable; } } static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba, enum ufs_notify_change_status status, struct ufs_pa_layer_attr *dev_max_params, struct ufs_pa_layer_attr *dev_req_params) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); struct ufs_dev_params ufs_qcom_cap; int ret = 0; if (!dev_req_params) { pr_err("%s: incoming dev_req_params is NULL\n", __func__); ret = -EINVAL; goto out; } switch (status) { case PRE_CHANGE: ufs_qcom_cap.tx_lanes = UFS_QCOM_LIMIT_NUM_LANES_TX; ufs_qcom_cap.rx_lanes = UFS_QCOM_LIMIT_NUM_LANES_RX; ufs_qcom_cap.hs_rx_gear = UFS_QCOM_LIMIT_HSGEAR_RX; ufs_qcom_cap.hs_tx_gear = UFS_QCOM_LIMIT_HSGEAR_TX; ufs_qcom_cap.pwm_rx_gear = UFS_QCOM_LIMIT_PWMGEAR_RX; ufs_qcom_cap.pwm_tx_gear = UFS_QCOM_LIMIT_PWMGEAR_TX; ufs_qcom_cap.rx_pwr_pwm = UFS_QCOM_LIMIT_RX_PWR_PWM; ufs_qcom_cap.tx_pwr_pwm = UFS_QCOM_LIMIT_TX_PWR_PWM; ufs_qcom_cap.rx_pwr_hs = UFS_QCOM_LIMIT_RX_PWR_HS; ufs_qcom_cap.tx_pwr_hs = UFS_QCOM_LIMIT_TX_PWR_HS; ufs_qcom_cap.hs_rate = UFS_QCOM_LIMIT_HS_RATE; ufs_qcom_cap.desired_working_mode = UFS_QCOM_LIMIT_DESIRED_MODE; if (host->hw_ver.major == 0x1) { /* * HS-G3 operations may not reliably work on legacy QCOM * UFS host controller hardware even though capability * exchange during link startup phase may end up * negotiating maximum supported gear as G3. * Hence downgrade the maximum supported gear to HS-G2. */ if (ufs_qcom_cap.hs_tx_gear > UFS_HS_G2) ufs_qcom_cap.hs_tx_gear = UFS_HS_G2; if (ufs_qcom_cap.hs_rx_gear > UFS_HS_G2) ufs_qcom_cap.hs_rx_gear = UFS_HS_G2; } ret = ufshcd_get_pwr_dev_param(&ufs_qcom_cap, dev_max_params, dev_req_params); if (ret) { pr_err("%s: failed to determine capabilities\n", __func__); goto out; } /* enable the device ref clock before changing to HS mode */ if (!ufshcd_is_hs_mode(&hba->pwr_info) && ufshcd_is_hs_mode(dev_req_params)) ufs_qcom_dev_ref_clk_ctrl(host, true); if (host->hw_ver.major >= 0x4) { if (dev_req_params->gear_tx == UFS_HS_G4) { /* INITIAL ADAPT */ ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXHSADAPTTYPE), PA_INITIAL_ADAPT); } else { /* NO ADAPT */ ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXHSADAPTTYPE), PA_NO_ADAPT); } } break; case POST_CHANGE: if (ufs_qcom_cfg_timers(hba, dev_req_params->gear_rx, dev_req_params->pwr_rx, dev_req_params->hs_rate, false)) { dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n", __func__); /* * we return error code at the end of the routine, * but continue to configure UFS_PHY_TX_LANE_ENABLE * and bus voting as usual */ ret = -EINVAL; } /* cache the power mode parameters to use internally */ memcpy(&host->dev_req_params, dev_req_params, sizeof(*dev_req_params)); ufs_qcom_update_bus_bw_vote(host); /* disable the device ref clock if entered PWM mode */ if (ufshcd_is_hs_mode(&hba->pwr_info) && !ufshcd_is_hs_mode(dev_req_params)) ufs_qcom_dev_ref_clk_ctrl(host, false); break; default: ret = -EINVAL; break; } out: return ret; } static int ufs_qcom_quirk_host_pa_saveconfigtime(struct ufs_hba *hba) { int err; u32 pa_vs_config_reg1; err = ufshcd_dme_get(hba, UIC_ARG_MIB(PA_VS_CONFIG_REG1), &pa_vs_config_reg1); if (err) goto out; /* Allow extension of MSB bits of PA_SaveConfigTime attribute */ err = ufshcd_dme_set(hba, UIC_ARG_MIB(PA_VS_CONFIG_REG1), (pa_vs_config_reg1 | (1 << 12))); out: return err; } static int ufs_qcom_apply_dev_quirks(struct ufs_hba *hba) { int err = 0; if (hba->dev_quirks & UFS_DEVICE_QUIRK_HOST_PA_SAVECONFIGTIME) err = ufs_qcom_quirk_host_pa_saveconfigtime(hba); if (hba->dev_info.wmanufacturerid == UFS_VENDOR_WDC) hba->dev_quirks |= UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE; return err; } static u32 ufs_qcom_get_ufs_hci_version(struct ufs_hba *hba) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); if (host->hw_ver.major == 0x1) return UFSHCI_VERSION_11; else return UFSHCI_VERSION_20; } /** * ufs_qcom_advertise_quirks - advertise the known QCOM UFS controller quirks * @hba: host controller instance * * QCOM UFS host controller might have some non standard behaviours (quirks) * than what is specified by UFSHCI specification. Advertise all such * quirks to standard UFS host controller driver so standard takes them into * account. */ static void ufs_qcom_advertise_quirks(struct ufs_hba *hba) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); if (host->hw_ver.major == 0x01) { hba->quirks |= UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS | UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP | UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE; if (host->hw_ver.minor == 0x0001 && host->hw_ver.step == 0x0001) hba->quirks |= UFSHCD_QUIRK_BROKEN_INTR_AGGR; hba->quirks |= UFSHCD_QUIRK_BROKEN_LCC; } if (host->hw_ver.major == 0x2) { hba->quirks |= UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION; if (!ufs_qcom_cap_qunipro(host)) /* Legacy UniPro mode still need following quirks */ hba->quirks |= (UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS | UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE | UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP); } } static void ufs_qcom_set_caps(struct ufs_hba *hba) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); hba->caps |= UFSHCD_CAP_CLK_GATING | UFSHCD_CAP_HIBERN8_WITH_CLK_GATING; hba->caps |= UFSHCD_CAP_CLK_SCALING; hba->caps |= UFSHCD_CAP_AUTO_BKOPS_SUSPEND; if (host->hw_ver.major >= 0x2) { host->caps = UFS_QCOM_CAP_QUNIPRO | UFS_QCOM_CAP_RETAIN_SEC_CFG_AFTER_PWR_COLLAPSE; } } /** * ufs_qcom_setup_clocks - enables/disable clocks * @hba: host controller instance * @on: If true, enable clocks else disable them. * @status: PRE_CHANGE or POST_CHANGE notify * * Returns 0 on success, non-zero on failure. */ static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on, enum ufs_notify_change_status status) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); int err = 0; /* * In case ufs_qcom_init() is not yet done, simply ignore. * This ufs_qcom_setup_clocks() shall be called from * ufs_qcom_init() after init is done. */ if (!host) return 0; switch (status) { case PRE_CHANGE: if (on) { err = ufs_qcom_set_bus_vote(hba, true); } else { if (!ufs_qcom_is_link_active(hba)) { /* disable device ref_clk */ ufs_qcom_dev_ref_clk_ctrl(host, false); } } break; case POST_CHANGE: if (on) { /* enable the device ref clock for HS mode*/ if (ufshcd_is_hs_mode(&hba->pwr_info)) ufs_qcom_dev_ref_clk_ctrl(host, true); } else { err = ufs_qcom_set_bus_vote(hba, false); } break; } return err; } static int ufs_qcom_reset_assert(struct reset_controller_dev *rcdev, unsigned long id) { struct ufs_qcom_host *host = rcdev_to_ufs_host(rcdev); /* Currently this code only knows about a single reset. */ WARN_ON(id); ufs_qcom_assert_reset(host->hba); /* provide 1ms delay to let the reset pulse propagate. */ usleep_range(1000, 1100); return 0; } static int ufs_qcom_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id) { struct ufs_qcom_host *host = rcdev_to_ufs_host(rcdev); /* Currently this code only knows about a single reset. */ WARN_ON(id); ufs_qcom_deassert_reset(host->hba); /* * after reset deassertion, phy will need all ref clocks, * voltage, current to settle down before starting serdes. */ usleep_range(1000, 1100); return 0; } static const struct reset_control_ops ufs_qcom_reset_ops = { .assert = ufs_qcom_reset_assert, .deassert = ufs_qcom_reset_deassert, }; #define ANDROID_BOOT_DEV_MAX 30 static char android_boot_dev[ANDROID_BOOT_DEV_MAX]; #ifndef MODULE static int __init get_android_boot_dev(char *str) { strlcpy(android_boot_dev, str, ANDROID_BOOT_DEV_MAX); return 1; } __setup("androidboot.bootdevice=", get_android_boot_dev); #endif /** * ufs_qcom_init - bind phy with controller * @hba: host controller instance * * Binds PHY with controller and powers up PHY enabling clocks * and regulators. * * Returns -EPROBE_DEFER if binding fails, returns negative error * on phy power up failure and returns zero on success. */ static int ufs_qcom_init(struct ufs_hba *hba) { int err; struct device *dev = hba->dev; struct platform_device *pdev = to_platform_device(dev); struct ufs_qcom_host *host; struct resource *res; if (strlen(android_boot_dev) && strcmp(android_boot_dev, dev_name(dev))) return -ENODEV; host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL); if (!host) { err = -ENOMEM; dev_err(dev, "%s: no memory for qcom ufs host\n", __func__); goto out; } /* Make a two way bind between the qcom host and the hba */ host->hba = hba; ufshcd_set_variant(hba, host); /* Setup the reset control of HCI */ host->core_reset = devm_reset_control_get(hba->dev, "rst"); if (IS_ERR(host->core_reset)) { err = PTR_ERR(host->core_reset); dev_warn(dev, "Failed to get reset control %d\n", err); host->core_reset = NULL; err = 0; } /* Fire up the reset controller. Failure here is non-fatal. */ host->rcdev.of_node = dev->of_node; host->rcdev.ops = &ufs_qcom_reset_ops; host->rcdev.owner = dev->driver->owner; host->rcdev.nr_resets = 1; err = devm_reset_controller_register(dev, &host->rcdev); if (err) { dev_warn(dev, "Failed to register reset controller\n"); err = 0; } /* * voting/devoting device ref_clk source is time consuming hence * skip devoting it during aggressive clock gating. This clock * will still be gated off during runtime suspend. */ host->generic_phy = devm_phy_get(dev, "ufsphy"); if (host->generic_phy == ERR_PTR(-EPROBE_DEFER)) { /* * UFS driver might be probed before the phy driver does. * In that case we would like to return EPROBE_DEFER code. */ err = -EPROBE_DEFER; dev_warn(dev, "%s: required phy device. hasn't probed yet. err = %d\n", __func__, err); goto out_variant_clear; } else if (IS_ERR(host->generic_phy)) { if (has_acpi_companion(dev)) { host->generic_phy = NULL; } else { err = PTR_ERR(host->generic_phy); dev_err(dev, "%s: PHY get failed %d\n", __func__, err); goto out_variant_clear; } } host->device_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); if (IS_ERR(host->device_reset)) { err = PTR_ERR(host->device_reset); if (err != -EPROBE_DEFER) dev_err(dev, "failed to acquire reset gpio: %d\n", err); goto out_variant_clear; } err = ufs_qcom_bus_register(host); if (err) goto out_variant_clear; ufs_qcom_get_controller_revision(hba, &host->hw_ver.major, &host->hw_ver.minor, &host->hw_ver.step); /* * for newer controllers, device reference clock control bit has * moved inside UFS controller register address space itself. */ if (host->hw_ver.major >= 0x02) { host->dev_ref_clk_ctrl_mmio = hba->mmio_base + REG_UFS_CFG1; host->dev_ref_clk_en_mask = BIT(26); } else { /* "dev_ref_clk_ctrl_mem" is optional resource */ res = platform_get_resource(pdev, IORESOURCE_MEM, 1); if (res) { host->dev_ref_clk_ctrl_mmio = devm_ioremap_resource(dev, res); if (IS_ERR(host->dev_ref_clk_ctrl_mmio)) { dev_warn(dev, "%s: could not map dev_ref_clk_ctrl_mmio, err %ld\n", __func__, PTR_ERR(host->dev_ref_clk_ctrl_mmio)); host->dev_ref_clk_ctrl_mmio = NULL; } host->dev_ref_clk_en_mask = BIT(5); } } err = ufs_qcom_init_lane_clks(host); if (err) goto out_variant_clear; ufs_qcom_set_caps(hba); ufs_qcom_advertise_quirks(hba); ufs_qcom_set_bus_vote(hba, true); ufs_qcom_setup_clocks(hba, true, POST_CHANGE); if (hba->dev->id < MAX_UFS_QCOM_HOSTS) ufs_qcom_hosts[hba->dev->id] = host; host->dbg_print_en |= UFS_QCOM_DEFAULT_DBG_PRINT_EN; ufs_qcom_get_default_testbus_cfg(host); err = ufs_qcom_testbus_config(host); if (err) { dev_warn(dev, "%s: failed to configure the testbus %d\n", __func__, err); err = 0; } goto out; out_variant_clear: ufshcd_set_variant(hba, NULL); out: return err; } static void ufs_qcom_exit(struct ufs_hba *hba) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); ufs_qcom_disable_lane_clks(host); phy_power_off(host->generic_phy); phy_exit(host->generic_phy); } static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba, u32 clk_cycles) { int err; u32 core_clk_ctrl_reg; if (clk_cycles > DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK) return -EINVAL; err = ufshcd_dme_get(hba, UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL), &core_clk_ctrl_reg); if (err) goto out; core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK; core_clk_ctrl_reg |= clk_cycles; /* Clear CORE_CLK_DIV_EN */ core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT; err = ufshcd_dme_set(hba, UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL), core_clk_ctrl_reg); out: return err; } static int ufs_qcom_clk_scale_up_pre_change(struct ufs_hba *hba) { /* nothing to do as of now */ return 0; } static int ufs_qcom_clk_scale_up_post_change(struct ufs_hba *hba) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); if (!ufs_qcom_cap_qunipro(host)) return 0; /* set unipro core clock cycles to 150 and clear clock divider */ return ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba, 150); } static int ufs_qcom_clk_scale_down_pre_change(struct ufs_hba *hba) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); int err; u32 core_clk_ctrl_reg; if (!ufs_qcom_cap_qunipro(host)) return 0; err = ufshcd_dme_get(hba, UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL), &core_clk_ctrl_reg); /* make sure CORE_CLK_DIV_EN is cleared */ if (!err && (core_clk_ctrl_reg & DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT)) { core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT; err = ufshcd_dme_set(hba, UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL), core_clk_ctrl_reg); } return err; } static int ufs_qcom_clk_scale_down_post_change(struct ufs_hba *hba) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); if (!ufs_qcom_cap_qunipro(host)) return 0; /* set unipro core clock cycles to 75 and clear clock divider */ return ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba, 75); } static int ufs_qcom_clk_scale_notify(struct ufs_hba *hba, bool scale_up, enum ufs_notify_change_status status) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); struct ufs_pa_layer_attr *dev_req_params = &host->dev_req_params; int err = 0; if (status == PRE_CHANGE) { if (scale_up) err = ufs_qcom_clk_scale_up_pre_change(hba); else err = ufs_qcom_clk_scale_down_pre_change(hba); } else { if (scale_up) err = ufs_qcom_clk_scale_up_post_change(hba); else err = ufs_qcom_clk_scale_down_post_change(hba); if (err || !dev_req_params) goto out; ufs_qcom_cfg_timers(hba, dev_req_params->gear_rx, dev_req_params->pwr_rx, dev_req_params->hs_rate, false); ufs_qcom_update_bus_bw_vote(host); } out: return err; } static void ufs_qcom_print_hw_debug_reg_all(struct ufs_hba *hba, void *priv, void (*print_fn)(struct ufs_hba *hba, int offset, int num_regs, const char *str, void *priv)) { u32 reg; struct ufs_qcom_host *host; if (unlikely(!hba)) { pr_err("%s: hba is NULL\n", __func__); return; } if (unlikely(!print_fn)) { dev_err(hba->dev, "%s: print_fn is NULL\n", __func__); return; } host = ufshcd_get_variant(hba); if (!(host->dbg_print_en & UFS_QCOM_DBG_PRINT_REGS_EN)) return; reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_REG_OCSC); print_fn(hba, reg, 44, "UFS_UFS_DBG_RD_REG_OCSC ", priv); reg = ufshcd_readl(hba, REG_UFS_CFG1); reg |= UTP_DBG_RAMS_EN; ufshcd_writel(hba, reg, REG_UFS_CFG1); reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_EDTL_RAM); print_fn(hba, reg, 32, "UFS_UFS_DBG_RD_EDTL_RAM ", priv); reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_DESC_RAM); print_fn(hba, reg, 128, "UFS_UFS_DBG_RD_DESC_RAM ", priv); reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_PRDT_RAM); print_fn(hba, reg, 64, "UFS_UFS_DBG_RD_PRDT_RAM ", priv); /* clear bit 17 - UTP_DBG_RAMS_EN */ ufshcd_rmwl(hba, UTP_DBG_RAMS_EN, 0, REG_UFS_CFG1); reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_UAWM); print_fn(hba, reg, 4, "UFS_DBG_RD_REG_UAWM ", priv); reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_UARM); print_fn(hba, reg, 4, "UFS_DBG_RD_REG_UARM ", priv); reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_TXUC); print_fn(hba, reg, 48, "UFS_DBG_RD_REG_TXUC ", priv); reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_RXUC); print_fn(hba, reg, 27, "UFS_DBG_RD_REG_RXUC ", priv); reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_DFC); print_fn(hba, reg, 19, "UFS_DBG_RD_REG_DFC ", priv); reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_TRLUT); print_fn(hba, reg, 34, "UFS_DBG_RD_REG_TRLUT ", priv); reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_TMRLUT); print_fn(hba, reg, 9, "UFS_DBG_RD_REG_TMRLUT ", priv); } static void ufs_qcom_enable_test_bus(struct ufs_qcom_host *host) { if (host->dbg_print_en & UFS_QCOM_DBG_PRINT_TEST_BUS_EN) { ufshcd_rmwl(host->hba, UFS_REG_TEST_BUS_EN, UFS_REG_TEST_BUS_EN, REG_UFS_CFG1); ufshcd_rmwl(host->hba, TEST_BUS_EN, TEST_BUS_EN, REG_UFS_CFG1); } else { ufshcd_rmwl(host->hba, UFS_REG_TEST_BUS_EN, 0, REG_UFS_CFG1); ufshcd_rmwl(host->hba, TEST_BUS_EN, 0, REG_UFS_CFG1); } } static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host) { /* provide a legal default configuration */ host->testbus.select_major = TSTBUS_UNIPRO; host->testbus.select_minor = 37; } static bool ufs_qcom_testbus_cfg_is_ok(struct ufs_qcom_host *host) { if (host->testbus.select_major >= TSTBUS_MAX) { dev_err(host->hba->dev, "%s: UFS_CFG1[TEST_BUS_SEL} may not equal 0x%05X\n", __func__, host->testbus.select_major); return false; } return true; } int ufs_qcom_testbus_config(struct ufs_qcom_host *host) { int reg; int offset; u32 mask = TEST_BUS_SUB_SEL_MASK; if (!host) return -EINVAL; if (!ufs_qcom_testbus_cfg_is_ok(host)) return -EPERM; switch (host->testbus.select_major) { case TSTBUS_UAWM: reg = UFS_TEST_BUS_CTRL_0; offset = 24; break; case TSTBUS_UARM: reg = UFS_TEST_BUS_CTRL_0; offset = 16; break; case TSTBUS_TXUC: reg = UFS_TEST_BUS_CTRL_0; offset = 8; break; case TSTBUS_RXUC: reg = UFS_TEST_BUS_CTRL_0; offset = 0; break; case TSTBUS_DFC: reg = UFS_TEST_BUS_CTRL_1; offset = 24; break; case TSTBUS_TRLUT: reg = UFS_TEST_BUS_CTRL_1; offset = 16; break; case TSTBUS_TMRLUT: reg = UFS_TEST_BUS_CTRL_1; offset = 8; break; case TSTBUS_OCSC: reg = UFS_TEST_BUS_CTRL_1; offset = 0; break; case TSTBUS_WRAPPER: reg = UFS_TEST_BUS_CTRL_2; offset = 16; break; case TSTBUS_COMBINED: reg = UFS_TEST_BUS_CTRL_2; offset = 8; break; case TSTBUS_UTP_HCI: reg = UFS_TEST_BUS_CTRL_2; offset = 0; break; case TSTBUS_UNIPRO: reg = UFS_UNIPRO_CFG; offset = 20; mask = 0xFFF; break; /* * No need for a default case, since * ufs_qcom_testbus_cfg_is_ok() checks that the configuration * is legal */ } mask <<= offset; pm_runtime_get_sync(host->hba->dev); ufshcd_hold(host->hba, false); ufshcd_rmwl(host->hba, TEST_BUS_SEL, (u32)host->testbus.select_major << 19, REG_UFS_CFG1); ufshcd_rmwl(host->hba, mask, (u32)host->testbus.select_minor << offset, reg); ufs_qcom_enable_test_bus(host); /* * Make sure the test bus configuration is * committed before returning. */ mb(); ufshcd_release(host->hba); pm_runtime_put_sync(host->hba->dev); return 0; } static void ufs_qcom_testbus_read(struct ufs_hba *hba) { ufshcd_dump_regs(hba, UFS_TEST_BUS, 4, "UFS_TEST_BUS "); } static void ufs_qcom_print_unipro_testbus(struct ufs_hba *hba) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); u32 *testbus = NULL; int i, nminor = 256, testbus_len = nminor * sizeof(u32); testbus = kmalloc(testbus_len, GFP_KERNEL); if (!testbus) return; host->testbus.select_major = TSTBUS_UNIPRO; for (i = 0; i < nminor; i++) { host->testbus.select_minor = i; ufs_qcom_testbus_config(host); testbus[i] = ufshcd_readl(hba, UFS_TEST_BUS); } print_hex_dump(KERN_ERR, "UNIPRO_TEST_BUS ", DUMP_PREFIX_OFFSET, 16, 4, testbus, testbus_len, false); kfree(testbus); } static void ufs_qcom_dump_dbg_regs(struct ufs_hba *hba) { ufshcd_dump_regs(hba, REG_UFS_SYS1CLK_1US, 16 * 4, "HCI Vendor Specific Registers "); /* sleep a bit intermittently as we are dumping too much data */ ufs_qcom_print_hw_debug_reg_all(hba, NULL, ufs_qcom_dump_regs_wrapper); usleep_range(1000, 1100); ufs_qcom_testbus_read(hba); usleep_range(1000, 1100); ufs_qcom_print_unipro_testbus(hba); usleep_range(1000, 1100); } /** * ufs_qcom_device_reset() - toggle the (optional) device reset line * @hba: per-adapter instance * * Toggles the (optional) reset line to reset the attached device. */ static void ufs_qcom_device_reset(struct ufs_hba *hba) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); /* reset gpio is optional */ if (!host->device_reset) return; /* * The UFS device shall detect reset pulses of 1us, sleep for 10us to * be on the safe side. */ gpiod_set_value_cansleep(host->device_reset, 1); usleep_range(10, 15); gpiod_set_value_cansleep(host->device_reset, 0); usleep_range(10, 15); } /** * struct ufs_hba_qcom_vops - UFS QCOM specific variant operations * * The variant operations configure the necessary controller and PHY * handshake during initialization. */ static const struct ufs_hba_variant_ops ufs_hba_qcom_vops = { .name = "qcom", .init = ufs_qcom_init, .exit = ufs_qcom_exit, .get_ufs_hci_version = ufs_qcom_get_ufs_hci_version, .clk_scale_notify = ufs_qcom_clk_scale_notify, .setup_clocks = ufs_qcom_setup_clocks, .hce_enable_notify = ufs_qcom_hce_enable_notify, .link_startup_notify = ufs_qcom_link_startup_notify, .pwr_change_notify = ufs_qcom_pwr_change_notify, .apply_dev_quirks = ufs_qcom_apply_dev_quirks, .suspend = ufs_qcom_suspend, .resume = ufs_qcom_resume, .dbg_register_dump = ufs_qcom_dump_dbg_regs, .device_reset = ufs_qcom_device_reset, }; /** * ufs_qcom_probe - probe routine of the driver * @pdev: pointer to Platform device handle * * Return zero for success and non-zero for failure */ static int ufs_qcom_probe(struct platform_device *pdev) { int err; struct device *dev = &pdev->dev; /* Perform generic probe */ err = ufshcd_pltfrm_init(pdev, &ufs_hba_qcom_vops); if (err) dev_err(dev, "ufshcd_pltfrm_init() failed %d\n", err); return err; } /** * ufs_qcom_remove - set driver_data of the device to NULL * @pdev: pointer to platform device handle * * Always returns 0 */ static int ufs_qcom_remove(struct platform_device *pdev) { struct ufs_hba *hba = platform_get_drvdata(pdev); pm_runtime_get_sync(&(pdev)->dev); ufshcd_remove(hba); return 0; } static const struct of_device_id ufs_qcom_of_match[] = { { .compatible = "qcom,ufshc"}, {}, }; MODULE_DEVICE_TABLE(of, ufs_qcom_of_match); #ifdef CONFIG_ACPI static const struct acpi_device_id ufs_qcom_acpi_match[] = { { "QCOM24A5" }, { }, }; MODULE_DEVICE_TABLE(acpi, ufs_qcom_acpi_match); #endif static const struct dev_pm_ops ufs_qcom_pm_ops = { .suspend = ufshcd_pltfrm_suspend, .resume = ufshcd_pltfrm_resume, .runtime_suspend = ufshcd_pltfrm_runtime_suspend, .runtime_resume = ufshcd_pltfrm_runtime_resume, .runtime_idle = ufshcd_pltfrm_runtime_idle, }; static struct platform_driver ufs_qcom_pltform = { .probe = ufs_qcom_probe, .remove = ufs_qcom_remove, .shutdown = ufshcd_pltfrm_shutdown, .driver = { .name = "ufshcd-qcom", .pm = &ufs_qcom_pm_ops, .of_match_table = of_match_ptr(ufs_qcom_of_match), .acpi_match_table = ACPI_PTR(ufs_qcom_acpi_match), }, }; module_platform_driver(ufs_qcom_pltform); MODULE_LICENSE("GPL v2");