// SPDX-License-Identifier: GPL-2.0-only /* * Clause 45 PHY support */ #include #include #include #include #include /** * genphy_c45_pma_can_sleep - checks if the PMA have sleep support * @phydev: target phy_device struct */ static bool genphy_c45_pma_can_sleep(struct phy_device *phydev) { int stat1; stat1 = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_STAT1); if (stat1 < 0) return false; return !!(stat1 & MDIO_STAT1_LPOWERABLE); } /** * genphy_c45_pma_resume - wakes up the PMA module * @phydev: target phy_device struct */ int genphy_c45_pma_resume(struct phy_device *phydev) { if (!genphy_c45_pma_can_sleep(phydev)) return -EOPNOTSUPP; return phy_clear_bits_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1, MDIO_CTRL1_LPOWER); } EXPORT_SYMBOL_GPL(genphy_c45_pma_resume); /** * genphy_c45_pma_suspend - suspends the PMA module * @phydev: target phy_device struct */ int genphy_c45_pma_suspend(struct phy_device *phydev) { if (!genphy_c45_pma_can_sleep(phydev)) return -EOPNOTSUPP; return phy_set_bits_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1, MDIO_CTRL1_LPOWER); } EXPORT_SYMBOL_GPL(genphy_c45_pma_suspend); /** * genphy_c45_pma_setup_forced - configures a forced speed * @phydev: target phy_device struct */ int genphy_c45_pma_setup_forced(struct phy_device *phydev) { int ctrl1, ctrl2, ret; /* Half duplex is not supported */ if (phydev->duplex != DUPLEX_FULL) return -EINVAL; ctrl1 = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1); if (ctrl1 < 0) return ctrl1; ctrl2 = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL2); if (ctrl2 < 0) return ctrl2; ctrl1 &= ~MDIO_CTRL1_SPEEDSEL; /* * PMA/PMD type selection is 1.7.5:0 not 1.7.3:0. See 45.2.1.6.1 * in 802.3-2012 and 802.3-2015. */ ctrl2 &= ~(MDIO_PMA_CTRL2_TYPE | 0x30); switch (phydev->speed) { case SPEED_10: ctrl2 |= MDIO_PMA_CTRL2_10BT; break; case SPEED_100: ctrl1 |= MDIO_PMA_CTRL1_SPEED100; ctrl2 |= MDIO_PMA_CTRL2_100BTX; break; case SPEED_1000: ctrl1 |= MDIO_PMA_CTRL1_SPEED1000; /* Assume 1000base-T */ ctrl2 |= MDIO_PMA_CTRL2_1000BT; break; case SPEED_2500: ctrl1 |= MDIO_CTRL1_SPEED2_5G; /* Assume 2.5Gbase-T */ ctrl2 |= MDIO_PMA_CTRL2_2_5GBT; break; case SPEED_5000: ctrl1 |= MDIO_CTRL1_SPEED5G; /* Assume 5Gbase-T */ ctrl2 |= MDIO_PMA_CTRL2_5GBT; break; case SPEED_10000: ctrl1 |= MDIO_CTRL1_SPEED10G; /* Assume 10Gbase-T */ ctrl2 |= MDIO_PMA_CTRL2_10GBT; break; default: return -EINVAL; } ret = phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1, ctrl1); if (ret < 0) return ret; ret = phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL2, ctrl2); if (ret < 0) return ret; return genphy_c45_an_disable_aneg(phydev); } EXPORT_SYMBOL_GPL(genphy_c45_pma_setup_forced); /** * genphy_c45_an_config_aneg - configure advertisement registers * @phydev: target phy_device struct * * Configure advertisement registers based on modes set in phydev->advertising * * Returns negative errno code on failure, 0 if advertisement didn't change, * or 1 if advertised modes changed. */ int genphy_c45_an_config_aneg(struct phy_device *phydev) { int changed, ret; u32 adv; linkmode_and(phydev->advertising, phydev->advertising, phydev->supported); changed = genphy_config_eee_advert(phydev); adv = linkmode_adv_to_mii_adv_t(phydev->advertising); ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE, ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM, adv); if (ret < 0) return ret; if (ret > 0) changed = 1; adv = linkmode_adv_to_mii_10gbt_adv_t(phydev->advertising); ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL, MDIO_AN_10GBT_CTRL_ADV10G | MDIO_AN_10GBT_CTRL_ADV5G | MDIO_AN_10GBT_CTRL_ADV2_5G, adv); if (ret < 0) return ret; if (ret > 0) changed = 1; return changed; } EXPORT_SYMBOL_GPL(genphy_c45_an_config_aneg); /** * genphy_c45_an_disable_aneg - disable auto-negotiation * @phydev: target phy_device struct * * Disable auto-negotiation in the Clause 45 PHY. The link parameters * parameters are controlled through the PMA/PMD MMD registers. * * Returns zero on success, negative errno code on failure. */ int genphy_c45_an_disable_aneg(struct phy_device *phydev) { return phy_clear_bits_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1, MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART); } EXPORT_SYMBOL_GPL(genphy_c45_an_disable_aneg); /** * genphy_c45_restart_aneg - Enable and restart auto-negotiation * @phydev: target phy_device struct * * This assumes that the auto-negotiation MMD is present. * * Enable and restart auto-negotiation. */ int genphy_c45_restart_aneg(struct phy_device *phydev) { return phy_set_bits_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1, MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART); } EXPORT_SYMBOL_GPL(genphy_c45_restart_aneg); /** * genphy_c45_check_and_restart_aneg - Enable and restart auto-negotiation * @phydev: target phy_device struct * @restart: whether aneg restart is requested * * This assumes that the auto-negotiation MMD is present. * * Check, and restart auto-negotiation if needed. */ int genphy_c45_check_and_restart_aneg(struct phy_device *phydev, bool restart) { int ret; if (!restart) { /* Configure and restart aneg if it wasn't set before */ ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1); if (ret < 0) return ret; if (!(ret & MDIO_AN_CTRL1_ENABLE)) restart = true; } if (restart) return genphy_c45_restart_aneg(phydev); return 0; } EXPORT_SYMBOL_GPL(genphy_c45_check_and_restart_aneg); /** * genphy_c45_aneg_done - return auto-negotiation complete status * @phydev: target phy_device struct * * This assumes that the auto-negotiation MMD is present. * * Reads the status register from the auto-negotiation MMD, returning: * - positive if auto-negotiation is complete * - negative errno code on error * - zero otherwise */ int genphy_c45_aneg_done(struct phy_device *phydev) { int val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1); return val < 0 ? val : val & MDIO_AN_STAT1_COMPLETE ? 1 : 0; } EXPORT_SYMBOL_GPL(genphy_c45_aneg_done); /** * genphy_c45_read_link - read the overall link status from the MMDs * @phydev: target phy_device struct * * Read the link status from the specified MMDs, and if they all indicate * that the link is up, set phydev->link to 1. If an error is encountered, * a negative errno will be returned, otherwise zero. */ int genphy_c45_read_link(struct phy_device *phydev) { u32 mmd_mask = MDIO_DEVS_PMAPMD; int val, devad; bool link = true; if (phydev->c45_ids.mmds_present & MDIO_DEVS_AN) { val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1); if (val < 0) return val; /* Autoneg is being started, therefore disregard current * link status and report link as down. */ if (val & MDIO_AN_CTRL1_RESTART) { phydev->link = 0; return 0; } } while (mmd_mask && link) { devad = __ffs(mmd_mask); mmd_mask &= ~BIT(devad); /* The link state is latched low so that momentary link * drops can be detected. Do not double-read the status * in polling mode to detect such short link drops except * the link was already down. */ if (!phy_polling_mode(phydev) || !phydev->link) { val = phy_read_mmd(phydev, devad, MDIO_STAT1); if (val < 0) return val; else if (val & MDIO_STAT1_LSTATUS) continue; } val = phy_read_mmd(phydev, devad, MDIO_STAT1); if (val < 0) return val; if (!(val & MDIO_STAT1_LSTATUS)) link = false; } phydev->link = link; return 0; } EXPORT_SYMBOL_GPL(genphy_c45_read_link); /** * genphy_c45_read_lpa - read the link partner advertisement and pause * @phydev: target phy_device struct * * Read the Clause 45 defined base (7.19) and 10G (7.33) status registers, * filling in the link partner advertisement, pause and asym_pause members * in @phydev. This assumes that the auto-negotiation MMD is present, and * the backplane bit (7.48.0) is clear. Clause 45 PHY drivers are expected * to fill in the remainder of the link partner advert from vendor registers. */ int genphy_c45_read_lpa(struct phy_device *phydev) { int val; val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1); if (val < 0) return val; if (!(val & MDIO_AN_STAT1_COMPLETE)) { linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->lp_advertising); mii_10gbt_stat_mod_linkmode_lpa_t(phydev->lp_advertising, 0); mii_adv_mod_linkmode_adv_t(phydev->lp_advertising, 0); phydev->pause = 0; phydev->asym_pause = 0; return 0; } linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->lp_advertising, val & MDIO_AN_STAT1_LPABLE); /* Read the link partner's base page advertisement */ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_LPA); if (val < 0) return val; mii_adv_mod_linkmode_adv_t(phydev->lp_advertising, val); phydev->pause = val & LPA_PAUSE_CAP ? 1 : 0; phydev->asym_pause = val & LPA_PAUSE_ASYM ? 1 : 0; /* Read the link partner's 10G advertisement */ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_STAT); if (val < 0) return val; mii_10gbt_stat_mod_linkmode_lpa_t(phydev->lp_advertising, val); return 0; } EXPORT_SYMBOL_GPL(genphy_c45_read_lpa); /** * genphy_c45_read_pma - read link speed etc from PMA * @phydev: target phy_device struct */ int genphy_c45_read_pma(struct phy_device *phydev) { int val; linkmode_zero(phydev->lp_advertising); val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1); if (val < 0) return val; switch (val & MDIO_CTRL1_SPEEDSEL) { case 0: phydev->speed = SPEED_10; break; case MDIO_PMA_CTRL1_SPEED100: phydev->speed = SPEED_100; break; case MDIO_PMA_CTRL1_SPEED1000: phydev->speed = SPEED_1000; break; case MDIO_CTRL1_SPEED2_5G: phydev->speed = SPEED_2500; break; case MDIO_CTRL1_SPEED5G: phydev->speed = SPEED_5000; break; case MDIO_CTRL1_SPEED10G: phydev->speed = SPEED_10000; break; default: phydev->speed = SPEED_UNKNOWN; break; } phydev->duplex = DUPLEX_FULL; return 0; } EXPORT_SYMBOL_GPL(genphy_c45_read_pma); /** * genphy_c45_read_mdix - read mdix status from PMA * @phydev: target phy_device struct */ int genphy_c45_read_mdix(struct phy_device *phydev) { int val; if (phydev->speed == SPEED_10000) { val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBT_SWAPPOL); if (val < 0) return val; switch (val) { case MDIO_PMA_10GBT_SWAPPOL_ABNX | MDIO_PMA_10GBT_SWAPPOL_CDNX: phydev->mdix = ETH_TP_MDI; break; case 0: phydev->mdix = ETH_TP_MDI_X; break; default: phydev->mdix = ETH_TP_MDI_INVALID; break; } } return 0; } EXPORT_SYMBOL_GPL(genphy_c45_read_mdix); /** * genphy_c45_pma_read_abilities - read supported link modes from PMA * @phydev: target phy_device struct * * Read the supported link modes from the PMA Status 2 (1.8) register. If bit * 1.8.9 is set, the list of supported modes is build using the values in the * PMA Extended Abilities (1.11) register, indicating 1000BASET an 10G related * modes. If bit 1.11.14 is set, then the list is also extended with the modes * in the 2.5G/5G PMA Extended register (1.21), indicating if 2.5GBASET and * 5GBASET are supported. */ int genphy_c45_pma_read_abilities(struct phy_device *phydev) { int val; linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported); if (phydev->c45_ids.mmds_present & MDIO_DEVS_AN) { val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1); if (val < 0) return val; if (val & MDIO_AN_STAT1_ABLE) linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported); } val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_STAT2); if (val < 0) return val; linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseSR_Full_BIT, phydev->supported, val & MDIO_PMA_STAT2_10GBSR); linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseLR_Full_BIT, phydev->supported, val & MDIO_PMA_STAT2_10GBLR); linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseER_Full_BIT, phydev->supported, val & MDIO_PMA_STAT2_10GBER); if (val & MDIO_PMA_STAT2_EXTABLE) { val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_EXTABLE); if (val < 0) return val; linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseLRM_Full_BIT, phydev->supported, val & MDIO_PMA_EXTABLE_10GBLRM); linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT, phydev->supported, val & MDIO_PMA_EXTABLE_10GBT); linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT, phydev->supported, val & MDIO_PMA_EXTABLE_10GBKX4); linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseKR_Full_BIT, phydev->supported, val & MDIO_PMA_EXTABLE_10GBKR); linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, phydev->supported, val & MDIO_PMA_EXTABLE_1000BT); linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseKX_Full_BIT, phydev->supported, val & MDIO_PMA_EXTABLE_1000BKX); linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, phydev->supported, val & MDIO_PMA_EXTABLE_100BTX); linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, phydev->supported, val & MDIO_PMA_EXTABLE_100BTX); linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, phydev->supported, val & MDIO_PMA_EXTABLE_10BT); linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT, phydev->supported, val & MDIO_PMA_EXTABLE_10BT); if (val & MDIO_PMA_EXTABLE_NBT) { val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_NG_EXTABLE); if (val < 0) return val; linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported, val & MDIO_PMA_NG_EXTABLE_2_5GBT); linkmode_mod_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT, phydev->supported, val & MDIO_PMA_NG_EXTABLE_5GBT); } } return 0; } EXPORT_SYMBOL_GPL(genphy_c45_pma_read_abilities); /** * genphy_c45_read_status - read PHY status * @phydev: target phy_device struct * * Reads status from PHY and sets phy_device members accordingly. */ int genphy_c45_read_status(struct phy_device *phydev) { int ret; ret = genphy_c45_read_link(phydev); if (ret) return ret; phydev->speed = SPEED_UNKNOWN; phydev->duplex = DUPLEX_UNKNOWN; phydev->pause = 0; phydev->asym_pause = 0; if (phydev->autoneg == AUTONEG_ENABLE) { ret = genphy_c45_read_lpa(phydev); if (ret) return ret; phy_resolve_aneg_linkmode(phydev); } else { ret = genphy_c45_read_pma(phydev); } return ret; } EXPORT_SYMBOL_GPL(genphy_c45_read_status); /** * genphy_c45_config_aneg - restart auto-negotiation or forced setup * @phydev: target phy_device struct * * Description: If auto-negotiation is enabled, we configure the * advertising, and then restart auto-negotiation. If it is not * enabled, then we force a configuration. */ int genphy_c45_config_aneg(struct phy_device *phydev) { bool changed = false; int ret; if (phydev->autoneg == AUTONEG_DISABLE) return genphy_c45_pma_setup_forced(phydev); ret = genphy_c45_an_config_aneg(phydev); if (ret < 0) return ret; if (ret > 0) changed = true; return genphy_c45_check_and_restart_aneg(phydev, changed); } EXPORT_SYMBOL_GPL(genphy_c45_config_aneg); /* The gen10g_* functions are the old Clause 45 stub */ int gen10g_config_aneg(struct phy_device *phydev) { return 0; } EXPORT_SYMBOL_GPL(gen10g_config_aneg); int genphy_c45_loopback(struct phy_device *phydev, bool enable) { return phy_modify_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, MDIO_PCS_CTRL1_LOOPBACK, enable ? MDIO_PCS_CTRL1_LOOPBACK : 0); } EXPORT_SYMBOL_GPL(genphy_c45_loopback); struct phy_driver genphy_c45_driver = { .phy_id = 0xffffffff, .phy_id_mask = 0xffffffff, .name = "Generic Clause 45 PHY", .read_status = genphy_c45_read_status, };