/* 10G controller driver for Samsung SoCs * * Copyright (C) 2013 Samsung Electronics Co., Ltd. * http://www.samsung.com * * Author: Siva Reddy Kallam * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include #include #include #include #include "sxgbe_common.h" #include "sxgbe_reg.h" /* MAC core initialization */ static void sxgbe_core_init(void __iomem *ioaddr) { u32 regval; /* TX configuration */ regval = readl(ioaddr + SXGBE_CORE_TX_CONFIG_REG); /* Other configurable parameters IFP, IPG, ISR, ISM * needs to be set if needed */ regval |= SXGBE_TX_JABBER_DISABLE; writel(regval, ioaddr + SXGBE_CORE_TX_CONFIG_REG); /* RX configuration */ regval = readl(ioaddr + SXGBE_CORE_RX_CONFIG_REG); /* Other configurable parameters CST, SPEN, USP, GPSLCE * WD, LM, S2KP, HDSMS, GPSL, ELEN, ARPEN needs to be * set if needed */ regval |= SXGBE_RX_JUMBPKT_ENABLE | SXGBE_RX_ACS_ENABLE; writel(regval, ioaddr + SXGBE_CORE_RX_CONFIG_REG); } /* Dump MAC registers */ static void sxgbe_core_dump_regs(void __iomem *ioaddr) { } static int sxgbe_get_lpi_status(void __iomem *ioaddr, const u32 irq_status) { int status = 0; int lpi_status; /* Reading this register shall clear all the LPI status bits */ lpi_status = readl(ioaddr + SXGBE_CORE_LPI_CTRL_STATUS); if (lpi_status & LPI_CTRL_STATUS_TLPIEN) status |= TX_ENTRY_LPI_MODE; if (lpi_status & LPI_CTRL_STATUS_TLPIEX) status |= TX_EXIT_LPI_MODE; if (lpi_status & LPI_CTRL_STATUS_RLPIEN) status |= RX_ENTRY_LPI_MODE; if (lpi_status & LPI_CTRL_STATUS_RLPIEX) status |= RX_EXIT_LPI_MODE; return status; } /* Handle extra events on specific interrupts hw dependent */ static int sxgbe_core_host_irq_status(void __iomem *ioaddr, struct sxgbe_extra_stats *x) { int irq_status, status = 0; irq_status = readl(ioaddr + SXGBE_CORE_INT_STATUS_REG); if (unlikely(irq_status & LPI_INT_STATUS)) status |= sxgbe_get_lpi_status(ioaddr, irq_status); return status; } /* Set power management mode (e.g. magic frame) */ static void sxgbe_core_pmt(void __iomem *ioaddr, unsigned long mode) { } /* Set/Get Unicast MAC addresses */ static void sxgbe_core_set_umac_addr(void __iomem *ioaddr, unsigned char *addr, unsigned int reg_n) { u32 high_word, low_word; high_word = (addr[5] << 8) || (addr[4]); low_word = ((addr[3] << 24) || (addr[2] << 16) || (addr[1] << 8) || (addr[0])); writel(high_word, ioaddr + SXGBE_CORE_ADD_HIGHOFFSET(reg_n)); writel(low_word, ioaddr + SXGBE_CORE_ADD_LOWOFFSET(reg_n)); } static void sxgbe_core_get_umac_addr(void __iomem *ioaddr, unsigned char *addr, unsigned int reg_n) { u32 high_word, low_word; high_word = readl(ioaddr + SXGBE_CORE_ADD_HIGHOFFSET(reg_n)); low_word = readl(ioaddr + SXGBE_CORE_ADD_LOWOFFSET(reg_n)); /* extract and assign address */ addr[5] = (high_word & 0x0000FF00) >> 8; addr[4] = (high_word & 0x000000FF); addr[3] = (low_word & 0xFF000000) >> 24; addr[2] = (low_word & 0x00FF0000) >> 16; addr[1] = (low_word & 0x0000FF00) >> 8; addr[0] = (low_word & 0x000000FF); } static void sxgbe_enable_tx(void __iomem *ioaddr, bool enable) { u32 tx_config; tx_config = readl(ioaddr + SXGBE_CORE_TX_CONFIG_REG); tx_config &= ~SXGBE_TX_ENABLE; if (enable) tx_config |= SXGBE_TX_ENABLE; writel(tx_config, ioaddr + SXGBE_CORE_TX_CONFIG_REG); } static void sxgbe_enable_rx(void __iomem *ioaddr, bool enable) { u32 rx_config; rx_config = readl(ioaddr + SXGBE_CORE_RX_CONFIG_REG); rx_config &= ~SXGBE_RX_ENABLE; if (enable) rx_config |= SXGBE_RX_ENABLE; writel(rx_config, ioaddr + SXGBE_CORE_RX_CONFIG_REG); } static int sxgbe_get_controller_version(void __iomem *ioaddr) { return readl(ioaddr + SXGBE_CORE_VERSION_REG); } /* If supported then get the optional core features */ static unsigned int sxgbe_get_hw_feature(void __iomem *ioaddr, unsigned char feature_index) { return readl(ioaddr + (SXGBE_CORE_HW_FEA_REG(feature_index))); } static void sxgbe_core_set_speed(void __iomem *ioaddr, unsigned char speed) { u32 tx_cfg = readl(ioaddr + SXGBE_CORE_TX_CONFIG_REG); /* clear the speed bits */ tx_cfg &= ~0x60000000; tx_cfg |= (speed << SXGBE_SPEED_LSHIFT); /* set the speed */ writel(tx_cfg, ioaddr + SXGBE_CORE_TX_CONFIG_REG); } static void sxgbe_set_eee_mode(void __iomem *ioaddr) { u32 ctrl; /* Enable the LPI mode for transmit path with Tx automate bit set. * When Tx Automate bit is set, MAC internally handles the entry * to LPI mode after all outstanding and pending packets are * transmitted. */ ctrl = readl(ioaddr + SXGBE_CORE_LPI_CTRL_STATUS); ctrl |= LPI_CTRL_STATUS_LPIEN | LPI_CTRL_STATUS_TXA; writel(ctrl, ioaddr + SXGBE_CORE_LPI_CTRL_STATUS); } static void sxgbe_reset_eee_mode(void __iomem *ioaddr) { u32 ctrl; ctrl = readl(ioaddr + SXGBE_CORE_LPI_CTRL_STATUS); ctrl &= ~(LPI_CTRL_STATUS_LPIEN | LPI_CTRL_STATUS_TXA); writel(ctrl, ioaddr + SXGBE_CORE_LPI_CTRL_STATUS); } static void sxgbe_set_eee_pls(void __iomem *ioaddr, const int link) { u32 ctrl; ctrl = readl(ioaddr + SXGBE_CORE_LPI_CTRL_STATUS); /* If the PHY link status is UP then set PLS */ if (link) ctrl |= LPI_CTRL_STATUS_PLS; else ctrl &= ~LPI_CTRL_STATUS_PLS; writel(ctrl, ioaddr + SXGBE_CORE_LPI_CTRL_STATUS); } static void sxgbe_set_eee_timer(void __iomem *ioaddr, const int ls, const int tw) { int value = ((tw & 0xffff)) | ((ls & 0x7ff) << 16); /* Program the timers in the LPI timer control register: * LS: minimum time (ms) for which the link * status from PHY should be ok before transmitting * the LPI pattern. * TW: minimum time (us) for which the core waits * after it has stopped transmitting the LPI pattern. */ writel(value, ioaddr + SXGBE_CORE_LPI_TIMER_CTRL); } const struct sxgbe_core_ops core_ops = { .core_init = sxgbe_core_init, .dump_regs = sxgbe_core_dump_regs, .host_irq_status = sxgbe_core_host_irq_status, .pmt = sxgbe_core_pmt, .set_umac_addr = sxgbe_core_set_umac_addr, .get_umac_addr = sxgbe_core_get_umac_addr, .enable_rx = sxgbe_enable_rx, .enable_tx = sxgbe_enable_tx, .get_controller_version = sxgbe_get_controller_version, .get_hw_feature = sxgbe_get_hw_feature, .set_speed = sxgbe_core_set_speed, .set_eee_mode = sxgbe_set_eee_mode, .reset_eee_mode = sxgbe_reset_eee_mode, .set_eee_timer = sxgbe_set_eee_timer, .set_eee_pls = sxgbe_set_eee_pls, }; const struct sxgbe_core_ops *sxgbe_get_core_ops(void) { return &core_ops; }