/* * Freescale eSDHC controller driver. * * Copyright (c) 2007, 2010, 2012 Freescale Semiconductor, Inc. * Copyright (c) 2009 MontaVista Software, Inc. * * Authors: Xiaobo Xie * Anton Vorontsov * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or (at * your option) any later version. */ #include #include #include #include #include #include "sdhci-pltfm.h" #include "sdhci-esdhc.h" #define VENDOR_V_22 0x12 #define VENDOR_V_23 0x13 static u32 esdhc_readl(struct sdhci_host *host, int reg) { u32 ret; ret = in_be32(host->ioaddr + reg); /* * The bit of ADMA flag in eSDHC is not compatible with standard * SDHC register, so set fake flag SDHCI_CAN_DO_ADMA2 when ADMA is * supported by eSDHC. * And for many FSL eSDHC controller, the reset value of field * SDHCI_CAN_DO_ADMA1 is one, but some of them can't support ADMA, * only these vendor version is greater than 2.2/0x12 support ADMA. * For FSL eSDHC, must aligned 4-byte, so use 0xFC to read the * the verdor version number, oxFE is SDHCI_HOST_VERSION. */ if ((reg == SDHCI_CAPABILITIES) && (ret & SDHCI_CAN_DO_ADMA1)) { u32 tmp = in_be32(host->ioaddr + SDHCI_SLOT_INT_STATUS); tmp = (tmp & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT; if (tmp > VENDOR_V_22) ret |= SDHCI_CAN_DO_ADMA2; } return ret; } static u16 esdhc_readw(struct sdhci_host *host, int reg) { u16 ret; int base = reg & ~0x3; int shift = (reg & 0x2) * 8; if (unlikely(reg == SDHCI_HOST_VERSION)) ret = in_be32(host->ioaddr + base) & 0xffff; else ret = (in_be32(host->ioaddr + base) >> shift) & 0xffff; return ret; } static u8 esdhc_readb(struct sdhci_host *host, int reg) { int base = reg & ~0x3; int shift = (reg & 0x3) * 8; u8 ret = (in_be32(host->ioaddr + base) >> shift) & 0xff; /* * "DMA select" locates at offset 0x28 in SD specification, but on * P5020 or P3041, it locates at 0x29. */ if (reg == SDHCI_HOST_CONTROL) { u32 dma_bits; dma_bits = in_be32(host->ioaddr + reg); /* DMA select is 22,23 bits in Protocol Control Register */ dma_bits = (dma_bits >> 5) & SDHCI_CTRL_DMA_MASK; /* fixup the result */ ret &= ~SDHCI_CTRL_DMA_MASK; ret |= dma_bits; } return ret; } static void esdhc_writel(struct sdhci_host *host, u32 val, int reg) { /* * Enable IRQSTATEN[BGESEN] is just to set IRQSTAT[BGE] * when SYSCTL[RSTD]) is set for some special operations. * No any impact other operation. */ if (reg == SDHCI_INT_ENABLE) val |= SDHCI_INT_BLK_GAP; sdhci_be32bs_writel(host, val, reg); } static void esdhc_writew(struct sdhci_host *host, u16 val, int reg) { if (reg == SDHCI_BLOCK_SIZE) { /* * Two last DMA bits are reserved, and first one is used for * non-standard blksz of 4096 bytes that we don't support * yet. So clear the DMA boundary bits. */ val &= ~SDHCI_MAKE_BLKSZ(0x7, 0); } sdhci_be32bs_writew(host, val, reg); } static void esdhc_writeb(struct sdhci_host *host, u8 val, int reg) { /* * "DMA select" location is offset 0x28 in SD specification, but on * P5020 or P3041, it's located at 0x29. */ if (reg == SDHCI_HOST_CONTROL) { u32 dma_bits; /* DMA select is 22,23 bits in Protocol Control Register */ dma_bits = (val & SDHCI_CTRL_DMA_MASK) << 5; clrsetbits_be32(host->ioaddr + reg , SDHCI_CTRL_DMA_MASK << 5, dma_bits); val &= ~SDHCI_CTRL_DMA_MASK; val |= in_be32(host->ioaddr + reg) & SDHCI_CTRL_DMA_MASK; } /* Prevent SDHCI core from writing reserved bits (e.g. HISPD). */ if (reg == SDHCI_HOST_CONTROL) val &= ~ESDHC_HOST_CONTROL_RES; sdhci_be32bs_writeb(host, val, reg); } /* * For Abort or Suspend after Stop at Block Gap, ignore the ADMA * error(IRQSTAT[ADMAE]) if both Transfer Complete(IRQSTAT[TC]) * and Block Gap Event(IRQSTAT[BGE]) are also set. * For Continue, apply soft reset for data(SYSCTL[RSTD]); * and re-issue the entire read transaction from beginning. */ static void esdhci_of_adma_workaround(struct sdhci_host *host, u32 intmask) { u32 tmp; bool applicable; dma_addr_t dmastart; dma_addr_t dmanow; tmp = in_be32(host->ioaddr + SDHCI_SLOT_INT_STATUS); tmp = (tmp & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT; applicable = (intmask & SDHCI_INT_DATA_END) && (intmask & SDHCI_INT_BLK_GAP) && (tmp == VENDOR_V_23); if (!applicable) return; host->data->error = 0; dmastart = sg_dma_address(host->data->sg); dmanow = dmastart + host->data->bytes_xfered; /* * Force update to the next DMA block boundary. */ dmanow = (dmanow & ~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1)) + SDHCI_DEFAULT_BOUNDARY_SIZE; host->data->bytes_xfered = dmanow - dmastart; sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS); } static int esdhc_of_enable_dma(struct sdhci_host *host) { setbits32(host->ioaddr + ESDHC_DMA_SYSCTL, ESDHC_DMA_SNOOP); return 0; } static unsigned int esdhc_of_get_max_clock(struct sdhci_host *host) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); return pltfm_host->clock; } static unsigned int esdhc_of_get_min_clock(struct sdhci_host *host) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); return pltfm_host->clock / 256 / 16; } static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock) { /* Workaround to reduce the clock frequency for p1010 esdhc */ if (of_find_compatible_node(NULL, NULL, "fsl,p1010-esdhc")) { if (clock > 20000000) clock -= 5000000; if (clock > 40000000) clock -= 5000000; } /* Set the clock */ esdhc_set_clock(host, clock); } #ifdef CONFIG_PM static u32 esdhc_proctl; static void esdhc_of_suspend(struct sdhci_host *host) { esdhc_proctl = sdhci_be32bs_readl(host, SDHCI_HOST_CONTROL); } static void esdhc_of_resume(struct sdhci_host *host) { esdhc_of_enable_dma(host); sdhci_be32bs_writel(host, esdhc_proctl, SDHCI_HOST_CONTROL); } #endif static void esdhc_of_platform_init(struct sdhci_host *host) { u32 vvn; vvn = in_be32(host->ioaddr + SDHCI_SLOT_INT_STATUS); vvn = (vvn & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT; if (vvn == VENDOR_V_22) host->quirks2 |= SDHCI_QUIRK2_HOST_NO_CMD23; if (vvn > VENDOR_V_22) host->quirks &= ~SDHCI_QUIRK_NO_BUSY_IRQ; } static struct sdhci_ops sdhci_esdhc_ops = { .read_l = esdhc_readl, .read_w = esdhc_readw, .read_b = esdhc_readb, .write_l = esdhc_writel, .write_w = esdhc_writew, .write_b = esdhc_writeb, .set_clock = esdhc_of_set_clock, .enable_dma = esdhc_of_enable_dma, .get_max_clock = esdhc_of_get_max_clock, .get_min_clock = esdhc_of_get_min_clock, .platform_init = esdhc_of_platform_init, #ifdef CONFIG_PM .platform_suspend = esdhc_of_suspend, .platform_resume = esdhc_of_resume, #endif .adma_workaround = esdhci_of_adma_workaround, }; static struct sdhci_pltfm_data sdhci_esdhc_pdata = { /* * card detection could be handled via GPIO * eSDHC cannot support End Attribute in NOP ADMA descriptor */ .quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_CARD_DETECTION | SDHCI_QUIRK_NO_CARD_NO_RESET | SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC, .ops = &sdhci_esdhc_ops, }; static int __devinit sdhci_esdhc_probe(struct platform_device *pdev) { return sdhci_pltfm_register(pdev, &sdhci_esdhc_pdata); } static int __devexit sdhci_esdhc_remove(struct platform_device *pdev) { return sdhci_pltfm_unregister(pdev); } static const struct of_device_id sdhci_esdhc_of_match[] = { { .compatible = "fsl,mpc8379-esdhc" }, { .compatible = "fsl,mpc8536-esdhc" }, { .compatible = "fsl,esdhc" }, { } }; MODULE_DEVICE_TABLE(of, sdhci_esdhc_of_match); static struct platform_driver sdhci_esdhc_driver = { .driver = { .name = "sdhci-esdhc", .owner = THIS_MODULE, .of_match_table = sdhci_esdhc_of_match, .pm = SDHCI_PLTFM_PMOPS, }, .probe = sdhci_esdhc_probe, .remove = __devexit_p(sdhci_esdhc_remove), }; module_platform_driver(sdhci_esdhc_driver); MODULE_DESCRIPTION("SDHCI OF driver for Freescale MPC eSDHC"); MODULE_AUTHOR("Xiaobo Xie , " "Anton Vorontsov "); MODULE_LICENSE("GPL v2");