/* DVB USB compliant Linux driver for the Afatech 9005 * USB1.1 DVB-T receiver. * * Copyright (C) 2007 Luca Olivetti (luca@ventoso.org) * * Thanks to Afatech who kindly provided information. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * * see Documentation/dvb/README.dvb-usb for more information */ #include "af9005.h" /* debug */ int dvb_usb_af9005_debug; module_param_named(debug, dvb_usb_af9005_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4,reg=8,i2c=16,fw=32 (or-able))." DVB_USB_DEBUG_STATUS); /* enable obnoxious led */ bool dvb_usb_af9005_led = true; module_param_named(led, dvb_usb_af9005_led, bool, 0644); MODULE_PARM_DESC(led, "enable led (default: 1)."); /* eeprom dump */ static int dvb_usb_af9005_dump_eeprom; module_param_named(dump_eeprom, dvb_usb_af9005_dump_eeprom, int, 0); MODULE_PARM_DESC(dump_eeprom, "dump contents of the eeprom."); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); /* remote control decoder */ static int (*rc_decode) (struct dvb_usb_device *d, u8 *data, int len, u32 *event, int *state); static void *rc_keys; static int *rc_keys_size; u8 regmask[8] = { 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff }; struct af9005_device_state { u8 sequence; int led_state; }; static int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg, int readwrite, int type, u8 * values, int len) { struct af9005_device_state *st = d->priv; u8 obuf[16] = { 0 }; u8 ibuf[17] = { 0 }; u8 command; int i; int ret; if (len < 1) { err("generic read/write, less than 1 byte. Makes no sense."); return -EINVAL; } if (len > 8) { err("generic read/write, more than 8 bytes. Not supported."); return -EINVAL; } obuf[0] = 14; /* rest of buffer length low */ obuf[1] = 0; /* rest of buffer length high */ obuf[2] = AF9005_REGISTER_RW; /* register operation */ obuf[3] = 12; /* rest of buffer length */ obuf[4] = st->sequence++; /* sequence number */ obuf[5] = (u8) (reg >> 8); /* register address */ obuf[6] = (u8) (reg & 0xff); if (type == AF9005_OFDM_REG) { command = AF9005_CMD_OFDM_REG; } else { command = AF9005_CMD_TUNER; } if (len > 1) command |= AF9005_CMD_BURST | AF9005_CMD_AUTOINC | (len - 1) << 3; command |= readwrite; if (readwrite == AF9005_CMD_WRITE) for (i = 0; i < len; i++) obuf[8 + i] = values[i]; else if (type == AF9005_TUNER_REG) /* read command for tuner, the first byte contains the i2c address */ obuf[8] = values[0]; obuf[7] = command; ret = dvb_usb_generic_rw(d, obuf, 16, ibuf, 17, 0); if (ret) return ret; /* sanity check */ if (ibuf[2] != AF9005_REGISTER_RW_ACK) { err("generic read/write, wrong reply code."); return -EIO; } if (ibuf[3] != 0x0d) { err("generic read/write, wrong length in reply."); return -EIO; } if (ibuf[4] != obuf[4]) { err("generic read/write, wrong sequence in reply."); return -EIO; } /* Windows driver doesn't check these fields, in fact sometimes the register in the reply is different that what has been sent if (ibuf[5] != obuf[5] || ibuf[6] != obuf[6]) { err("generic read/write, wrong register in reply."); return -EIO; } if (ibuf[7] != command) { err("generic read/write wrong command in reply."); return -EIO; } */ if (ibuf[16] != 0x01) { err("generic read/write wrong status code in reply."); return -EIO; } if (readwrite == AF9005_CMD_READ) for (i = 0; i < len; i++) values[i] = ibuf[8 + i]; return 0; } int af9005_read_ofdm_register(struct dvb_usb_device *d, u16 reg, u8 * value) { int ret; deb_reg("read register %x ", reg); ret = af9005_generic_read_write(d, reg, AF9005_CMD_READ, AF9005_OFDM_REG, value, 1); if (ret) deb_reg("failed\n"); else deb_reg("value %x\n", *value); return ret; } int af9005_read_ofdm_registers(struct dvb_usb_device *d, u16 reg, u8 * values, int len) { int ret; deb_reg("read %d registers %x ", len, reg); ret = af9005_generic_read_write(d, reg, AF9005_CMD_READ, AF9005_OFDM_REG, values, len); if (ret) deb_reg("failed\n"); else debug_dump(values, len, deb_reg); return ret; } int af9005_write_ofdm_register(struct dvb_usb_device *d, u16 reg, u8 value) { int ret; u8 temp = value; deb_reg("write register %x value %x ", reg, value); ret = af9005_generic_read_write(d, reg, AF9005_CMD_WRITE, AF9005_OFDM_REG, &temp, 1); if (ret) deb_reg("failed\n"); else deb_reg("ok\n"); return ret; } int af9005_write_ofdm_registers(struct dvb_usb_device *d, u16 reg, u8 * values, int len) { int ret; deb_reg("write %d registers %x values ", len, reg); debug_dump(values, len, deb_reg); ret = af9005_generic_read_write(d, reg, AF9005_CMD_WRITE, AF9005_OFDM_REG, values, len); if (ret) deb_reg("failed\n"); else deb_reg("ok\n"); return ret; } int af9005_read_register_bits(struct dvb_usb_device *d, u16 reg, u8 pos, u8 len, u8 * value) { u8 temp; int ret; deb_reg("read bits %x %x %x", reg, pos, len); ret = af9005_read_ofdm_register(d, reg, &temp); if (ret) { deb_reg(" failed\n"); return ret; } *value = (temp >> pos) & regmask[len - 1]; deb_reg(" value %x\n", *value); return 0; } int af9005_write_register_bits(struct dvb_usb_device *d, u16 reg, u8 pos, u8 len, u8 value) { u8 temp, mask; int ret; deb_reg("write bits %x %x %x value %x\n", reg, pos, len, value); if (pos == 0 && len == 8) return af9005_write_ofdm_register(d, reg, value); ret = af9005_read_ofdm_register(d, reg, &temp); if (ret) return ret; mask = regmask[len - 1] << pos; temp = (temp & ~mask) | ((value << pos) & mask); return af9005_write_ofdm_register(d, reg, temp); } static int af9005_usb_read_tuner_registers(struct dvb_usb_device *d, u16 reg, u8 * values, int len) { return af9005_generic_read_write(d, reg, AF9005_CMD_READ, AF9005_TUNER_REG, values, len); } static int af9005_usb_write_tuner_registers(struct dvb_usb_device *d, u16 reg, u8 * values, int len) { return af9005_generic_read_write(d, reg, AF9005_CMD_WRITE, AF9005_TUNER_REG, values, len); } int af9005_write_tuner_registers(struct dvb_usb_device *d, u16 reg, u8 * values, int len) { /* don't let the name of this function mislead you: it's just used as an interface from the firmware to the i2c bus. The actual i2c addresses are contained in the data */ int ret, i, done = 0, fail = 0; u8 temp; ret = af9005_usb_write_tuner_registers(d, reg, values, len); if (ret) return ret; if (reg != 0xffff) { /* check if write done (0xa40d bit 1) or fail (0xa40d bit 2) */ for (i = 0; i < 200; i++) { ret = af9005_read_ofdm_register(d, xd_I2C_i2c_m_status_wdat_done, &temp); if (ret) return ret; done = temp & (regmask[i2c_m_status_wdat_done_len - 1] << i2c_m_status_wdat_done_pos); if (done) break; fail = temp & (regmask[i2c_m_status_wdat_fail_len - 1] << i2c_m_status_wdat_fail_pos); if (fail) break; msleep(50); } if (i == 200) return -ETIMEDOUT; if (fail) { /* clear write fail bit */ af9005_write_register_bits(d, xd_I2C_i2c_m_status_wdat_fail, i2c_m_status_wdat_fail_pos, i2c_m_status_wdat_fail_len, 1); return -EIO; } /* clear write done bit */ ret = af9005_write_register_bits(d, xd_I2C_i2c_m_status_wdat_fail, i2c_m_status_wdat_done_pos, i2c_m_status_wdat_done_len, 1); if (ret) return ret; } return 0; } int af9005_read_tuner_registers(struct dvb_usb_device *d, u16 reg, u8 addr, u8 * values, int len) { /* don't let the name of this function mislead you: it's just used as an interface from the firmware to the i2c bus. The actual i2c addresses are contained in the data */ int ret, i; u8 temp, buf[2]; buf[0] = addr; /* tuner i2c address */ buf[1] = values[0]; /* tuner register */ values[0] = addr + 0x01; /* i2c read address */ if (reg == APO_REG_I2C_RW_SILICON_TUNER) { /* write tuner i2c address to tuner, 0c00c0 undocumented, found by sniffing */ ret = af9005_write_tuner_registers(d, 0x00c0, buf, 2); if (ret) return ret; } /* send read command to ofsm */ ret = af9005_usb_read_tuner_registers(d, reg, values, 1); if (ret) return ret; /* check if read done */ for (i = 0; i < 200; i++) { ret = af9005_read_ofdm_register(d, 0xa408, &temp); if (ret) return ret; if (temp & 0x01) break; msleep(50); } if (i == 200) return -ETIMEDOUT; /* clear read done bit (by writing 1) */ ret = af9005_write_ofdm_register(d, xd_I2C_i2c_m_data8, 1); if (ret) return ret; /* get read data (available from 0xa400) */ for (i = 0; i < len; i++) { ret = af9005_read_ofdm_register(d, 0xa400 + i, &temp); if (ret) return ret; values[i] = temp; } return 0; } static int af9005_i2c_write(struct dvb_usb_device *d, u8 i2caddr, u8 reg, u8 * data, int len) { int ret, i; u8 buf[3]; deb_i2c("i2c_write i2caddr %x, reg %x, len %d data ", i2caddr, reg, len); debug_dump(data, len, deb_i2c); for (i = 0; i < len; i++) { buf[0] = i2caddr; buf[1] = reg + (u8) i; buf[2] = data[i]; ret = af9005_write_tuner_registers(d, APO_REG_I2C_RW_SILICON_TUNER, buf, 3); if (ret) { deb_i2c("i2c_write failed\n"); return ret; } } deb_i2c("i2c_write ok\n"); return 0; } static int af9005_i2c_read(struct dvb_usb_device *d, u8 i2caddr, u8 reg, u8 * data, int len) { int ret, i; u8 temp; deb_i2c("i2c_read i2caddr %x, reg %x, len %d\n ", i2caddr, reg, len); for (i = 0; i < len; i++) { temp = reg + i; ret = af9005_read_tuner_registers(d, APO_REG_I2C_RW_SILICON_TUNER, i2caddr, &temp, 1); if (ret) { deb_i2c("i2c_read failed\n"); return ret; } data[i] = temp; } deb_i2c("i2c data read: "); debug_dump(data, len, deb_i2c); return 0; } static int af9005_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num) { /* only implements what the mt2060 module does, don't know how to make it really generic */ struct dvb_usb_device *d = i2c_get_adapdata(adap); int ret; u8 reg, addr; u8 *value; if (mutex_lock_interruptible(&d->i2c_mutex) < 0) return -EAGAIN; if (num > 2) warn("more than 2 i2c messages at a time is not handled yet. TODO."); if (num == 2) { /* reads a single register */ reg = *msg[0].buf; addr = msg[0].addr; value = msg[1].buf; ret = af9005_i2c_read(d, addr, reg, value, 1); if (ret == 0) ret = 2; } else { /* write one or more registers */ reg = msg[0].buf[0]; addr = msg[0].addr; value = &msg[0].buf[1]; ret = af9005_i2c_write(d, addr, reg, value, msg[0].len - 1); if (ret == 0) ret = 1; } mutex_unlock(&d->i2c_mutex); return ret; } static u32 af9005_i2c_func(struct i2c_adapter *adapter) { return I2C_FUNC_I2C; } static struct i2c_algorithm af9005_i2c_algo = { .master_xfer = af9005_i2c_xfer, .functionality = af9005_i2c_func, }; int af9005_send_command(struct dvb_usb_device *d, u8 command, u8 * wbuf, int wlen, u8 * rbuf, int rlen) { struct af9005_device_state *st = d->priv; int ret, i, packet_len; u8 buf[64]; u8 ibuf[64]; if (wlen < 0) { err("send command, wlen less than 0 bytes. Makes no sense."); return -EINVAL; } if (wlen > 54) { err("send command, wlen more than 54 bytes. Not supported."); return -EINVAL; } if (rlen > 54) { err("send command, rlen more than 54 bytes. Not supported."); return -EINVAL; } packet_len = wlen + 5; buf[0] = (u8) (packet_len & 0xff); buf[1] = (u8) ((packet_len & 0xff00) >> 8); buf[2] = 0x26; /* packet type */ buf[3] = wlen + 3; buf[4] = st->sequence++; buf[5] = command; buf[6] = wlen; for (i = 0; i < wlen; i++) buf[7 + i] = wbuf[i]; ret = dvb_usb_generic_rw(d, buf, wlen + 7, ibuf, rlen + 7, 0); if (ret) return ret; if (ibuf[2] != 0x27) { err("send command, wrong reply code."); return -EIO; } if (ibuf[4] != buf[4]) { err("send command, wrong sequence in reply."); return -EIO; } if (ibuf[5] != 0x01) { err("send command, wrong status code in reply."); return -EIO; } if (ibuf[6] != rlen) { err("send command, invalid data length in reply."); return -EIO; } for (i = 0; i < rlen; i++) rbuf[i] = ibuf[i + 7]; return 0; } int af9005_read_eeprom(struct dvb_usb_device *d, u8 address, u8 * values, int len) { struct af9005_device_state *st = d->priv; u8 obuf[16], ibuf[14]; int ret, i; memset(obuf, 0, sizeof(obuf)); memset(ibuf, 0, sizeof(ibuf)); obuf[0] = 14; /* length of rest of packet low */ obuf[1] = 0; /* length of rest of packer high */ obuf[2] = 0x2a; /* read/write eeprom */ obuf[3] = 12; /* size */ obuf[4] = st->sequence++; obuf[5] = 0; /* read */ obuf[6] = len; obuf[7] = address; ret = dvb_usb_generic_rw(d, obuf, 16, ibuf, 14, 0); if (ret) return ret; if (ibuf[2] != 0x2b) { err("Read eeprom, invalid reply code"); return -EIO; } if (ibuf[3] != 10) { err("Read eeprom, invalid reply length"); return -EIO; } if (ibuf[4] != obuf[4]) { err("Read eeprom, wrong sequence in reply "); return -EIO; } if (ibuf[5] != 1) { err("Read eeprom, wrong status in reply "); return -EIO; } for (i = 0; i < len; i++) { values[i] = ibuf[6 + i]; } return 0; } static int af9005_boot_packet(struct usb_device *udev, int type, u8 * reply) { u8 buf[FW_BULKOUT_SIZE + 2]; u16 checksum; int act_len, i, ret; memset(buf, 0, sizeof(buf)); buf[0] = (u8) (FW_BULKOUT_SIZE & 0xff); buf[1] = (u8) ((FW_BULKOUT_SIZE >> 8) & 0xff); switch (type) { case FW_CONFIG: buf[2] = 0x11; buf[3] = 0x04; buf[4] = 0x00; /* sequence number, original driver doesn't increment it here */ buf[5] = 0x03; checksum = buf[4] + buf[5]; buf[6] = (u8) ((checksum >> 8) & 0xff); buf[7] = (u8) (checksum & 0xff); break; case FW_CONFIRM: buf[2] = 0x11; buf[3] = 0x04; buf[4] = 0x00; /* sequence number, original driver doesn't increment it here */ buf[5] = 0x01; checksum = buf[4] + buf[5]; buf[6] = (u8) ((checksum >> 8) & 0xff); buf[7] = (u8) (checksum & 0xff); break; case FW_BOOT: buf[2] = 0x10; buf[3] = 0x08; buf[4] = 0x00; /* sequence number, original driver doesn't increment it here */ buf[5] = 0x97; buf[6] = 0xaa; buf[7] = 0x55; buf[8] = 0xa5; buf[9] = 0x5a; checksum = 0; for (i = 4; i <= 9; i++) checksum += buf[i]; buf[10] = (u8) ((checksum >> 8) & 0xff); buf[11] = (u8) (checksum & 0xff); break; default: err("boot packet invalid boot packet type"); return -EINVAL; } deb_fw(">>> "); debug_dump(buf, FW_BULKOUT_SIZE + 2, deb_fw); ret = usb_bulk_msg(udev, usb_sndbulkpipe(udev, 0x02), buf, FW_BULKOUT_SIZE + 2, &act_len, 2000); if (ret) err("boot packet bulk message failed: %d (%d/%d)", ret, FW_BULKOUT_SIZE + 2, act_len); else ret = act_len != FW_BULKOUT_SIZE + 2 ? -1 : 0; if (ret) return ret; memset(buf, 0, 9); ret = usb_bulk_msg(udev, usb_rcvbulkpipe(udev, 0x01), buf, 9, &act_len, 2000); if (ret) { err("boot packet recv bulk message failed: %d", ret); return ret; } deb_fw("<<< "); debug_dump(buf, act_len, deb_fw); checksum = 0; switch (type) { case FW_CONFIG: if (buf[2] != 0x11) { err("boot bad config header."); return -EIO; } if (buf[3] != 0x05) { err("boot bad config size."); return -EIO; } if (buf[4] != 0x00) { err("boot bad config sequence."); return -EIO; } if (buf[5] != 0x04) { err("boot bad config subtype."); return -EIO; } for (i = 4; i <= 6; i++) checksum += buf[i]; if (buf[7] * 256 + buf[8] != checksum) { err("boot bad config checksum."); return -EIO; } *reply = buf[6]; break; case FW_CONFIRM: if (buf[2] != 0x11) { err("boot bad confirm header."); return -EIO; } if (buf[3] != 0x05) { err("boot bad confirm size."); return -EIO; } if (buf[4] != 0x00) { err("boot bad confirm sequence."); return -EIO; } if (buf[5] != 0x02) { err("boot bad confirm subtype."); return -EIO; } for (i = 4; i <= 6; i++) checksum += buf[i]; if (buf[7] * 256 + buf[8] != checksum) { err("boot bad confirm checksum."); return -EIO; } *reply = buf[6]; break; case FW_BOOT: if (buf[2] != 0x10) { err("boot bad boot header."); return -EIO; } if (buf[3] != 0x05) { err("boot bad boot size."); return -EIO; } if (buf[4] != 0x00) { err("boot bad boot sequence."); return -EIO; } if (buf[5] != 0x01) { err("boot bad boot pattern 01."); return -EIO; } if (buf[6] != 0x10) { err("boot bad boot pattern 10."); return -EIO; } for (i = 4; i <= 6; i++) checksum += buf[i]; if (buf[7] * 256 + buf[8] != checksum) { err("boot bad boot checksum."); return -EIO; } break; } return 0; } static int af9005_download_firmware(struct usb_device *udev, const struct firmware *fw) { int i, packets, ret, act_len; u8 buf[FW_BULKOUT_SIZE + 2]; u8 reply; ret = af9005_boot_packet(udev, FW_CONFIG, &reply); if (ret) return ret; if (reply != 0x01) { err("before downloading firmware, FW_CONFIG expected 0x01, received 0x%x", reply); return -EIO; } packets = fw->size / FW_BULKOUT_SIZE; buf[0] = (u8) (FW_BULKOUT_SIZE & 0xff); buf[1] = (u8) ((FW_BULKOUT_SIZE >> 8) & 0xff); for (i = 0; i < packets; i++) { memcpy(&buf[2], fw->data + i * FW_BULKOUT_SIZE, FW_BULKOUT_SIZE); deb_fw(">>> "); debug_dump(buf, FW_BULKOUT_SIZE + 2, deb_fw); ret = usb_bulk_msg(udev, usb_sndbulkpipe(udev, 0x02), buf, FW_BULKOUT_SIZE + 2, &act_len, 1000); if (ret) { err("firmware download failed at packet %d with code %d", i, ret); return ret; } } ret = af9005_boot_packet(udev, FW_CONFIRM, &reply); if (ret) return ret; if (reply != (u8) (packets & 0xff)) { err("after downloading firmware, FW_CONFIRM expected 0x%x, received 0x%x", packets & 0xff, reply); return -EIO; } ret = af9005_boot_packet(udev, FW_BOOT, &reply); if (ret) return ret; ret = af9005_boot_packet(udev, FW_CONFIG, &reply); if (ret) return ret; if (reply != 0x02) { err("after downloading firmware, FW_CONFIG expected 0x02, received 0x%x", reply); return -EIO; } return 0; } int af9005_led_control(struct dvb_usb_device *d, int onoff) { struct af9005_device_state *st = d->priv; int temp, ret; if (onoff && dvb_usb_af9005_led) temp = 1; else temp = 0; if (st->led_state != temp) { ret = af9005_write_register_bits(d, xd_p_reg_top_locken1, reg_top_locken1_pos, reg_top_locken1_len, temp); if (ret) return ret; ret = af9005_write_register_bits(d, xd_p_reg_top_lock1, reg_top_lock1_pos, reg_top_lock1_len, temp); if (ret) return ret; st->led_state = temp; } return 0; } static int af9005_frontend_attach(struct dvb_usb_adapter *adap) { u8 buf[8]; int i; /* without these calls the first commands after downloading the firmware fail. I put these calls here to simulate what it is done in dvb-usb-init.c. */ struct usb_device *udev = adap->dev->udev; usb_clear_halt(udev, usb_sndbulkpipe(udev, 2)); usb_clear_halt(udev, usb_rcvbulkpipe(udev, 1)); if (dvb_usb_af9005_dump_eeprom) { printk("EEPROM DUMP\n"); for (i = 0; i < 255; i += 8) { af9005_read_eeprom(adap->dev, i, buf, 8); printk("ADDR %x ", i); debug_dump(buf, 8, printk); } } adap->fe_adap[0].fe = af9005_fe_attach(adap->dev); return 0; } static int af9005_rc_query(struct dvb_usb_device *d, u32 * event, int *state) { struct af9005_device_state *st = d->priv; int ret, len; u8 obuf[5]; u8 ibuf[256]; *state = REMOTE_NO_KEY_PRESSED; if (rc_decode == NULL) { /* it shouldn't never come here */ return 0; } /* deb_info("rc_query\n"); */ obuf[0] = 3; /* rest of packet length low */ obuf[1] = 0; /* rest of packet lentgh high */ obuf[2] = 0x40; /* read remote */ obuf[3] = 1; /* rest of packet length */ obuf[4] = st->sequence++; /* sequence number */ ret = dvb_usb_generic_rw(d, obuf, 5, ibuf, 256, 0); if (ret) { err("rc query failed"); return ret; } if (ibuf[2] != 0x41) { err("rc query bad header."); return -EIO; } if (ibuf[4] != obuf[4]) { err("rc query bad sequence."); return -EIO; } len = ibuf[5]; if (len > 246) { err("rc query invalid length"); return -EIO; } if (len > 0) { deb_rc("rc data (%d) ", len); debug_dump((ibuf + 6), len, deb_rc); ret = rc_decode(d, &ibuf[6], len, event, state); if (ret) { err("rc_decode failed"); return ret; } else { deb_rc("rc_decode state %x event %x\n", *state, *event); if (*state == REMOTE_KEY_REPEAT) *event = d->last_event; } } return 0; } static int af9005_power_ctrl(struct dvb_usb_device *d, int onoff) { return 0; } static int af9005_pid_filter_control(struct dvb_usb_adapter *adap, int onoff) { int ret; deb_info("pid filter control onoff %d\n", onoff); if (onoff) { ret = af9005_write_ofdm_register(adap->dev, XD_MP2IF_DMX_CTRL, 1); if (ret) return ret; ret = af9005_write_register_bits(adap->dev, XD_MP2IF_DMX_CTRL, 1, 1, 1); if (ret) return ret; ret = af9005_write_ofdm_register(adap->dev, XD_MP2IF_DMX_CTRL, 1); } else ret = af9005_write_ofdm_register(adap->dev, XD_MP2IF_DMX_CTRL, 0); if (ret) return ret; deb_info("pid filter control ok\n"); return 0; } static int af9005_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, int onoff) { u8 cmd = index & 0x1f; int ret; deb_info("set pid filter, index %d, pid %x, onoff %d\n", index, pid, onoff); if (onoff) { /* cannot use it as pid_filter_ctrl since it has to be done before setting the first pid */ if (adap->feedcount == 1) { deb_info("first pid set, enable pid table\n"); ret = af9005_pid_filter_control(adap, onoff); if (ret) return ret; } ret = af9005_write_ofdm_register(adap->dev, XD_MP2IF_PID_DATA_L, (u8) (pid & 0xff)); if (ret) return ret; ret = af9005_write_ofdm_register(adap->dev, XD_MP2IF_PID_DATA_H, (u8) (pid >> 8)); if (ret) return ret; cmd |= 0x20 | 0x40; } else { if (adap->feedcount == 0) { deb_info("last pid unset, disable pid table\n"); ret = af9005_pid_filter_control(adap, onoff); if (ret) return ret; } } ret = af9005_write_ofdm_register(adap->dev, XD_MP2IF_PID_IDX, cmd); if (ret) return ret; deb_info("set pid ok\n"); return 0; } static int af9005_identify_state(struct usb_device *udev, struct dvb_usb_device_properties *props, struct dvb_usb_device_description **desc, int *cold) { int ret; u8 reply; ret = af9005_boot_packet(udev, FW_CONFIG, &reply); if (ret) return ret; deb_info("result of FW_CONFIG in identify state %d\n", reply); if (reply == 0x01) *cold = 1; else if (reply == 0x02) *cold = 0; else return -EIO; deb_info("Identify state cold = %d\n", *cold); return 0; } static struct dvb_usb_device_properties af9005_properties; static int af9005_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { return dvb_usb_device_init(intf, &af9005_properties, THIS_MODULE, NULL, adapter_nr); } enum af9005_usb_table_entry { AFATECH_AF9005, TERRATEC_AF9005, ANSONIC_AF9005, }; static struct usb_device_id af9005_usb_table[] = { [AFATECH_AF9005] = {USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9005)}, [TERRATEC_AF9005] = {USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_USB_XE)}, [ANSONIC_AF9005] = {USB_DEVICE(USB_VID_ANSONIC, USB_PID_ANSONIC_DVBT_USB)}, { } }; MODULE_DEVICE_TABLE(usb, af9005_usb_table); static struct dvb_usb_device_properties af9005_properties = { .caps = DVB_USB_IS_AN_I2C_ADAPTER, .usb_ctrl = DEVICE_SPECIFIC, .firmware = "af9005.fw", .download_firmware = af9005_download_firmware, .no_reconnect = 1, .size_of_priv = sizeof(struct af9005_device_state), .num_adapters = 1, .adapter = { { .num_frontends = 1, .fe = {{ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, .pid_filter_count = 32, .pid_filter = af9005_pid_filter, /* .pid_filter_ctrl = af9005_pid_filter_control, */ .frontend_attach = af9005_frontend_attach, /* .tuner_attach = af9005_tuner_attach, */ /* parameter for the MPEG2-data transfer */ .stream = { .type = USB_BULK, .count = 10, .endpoint = 0x04, .u = { .bulk = { .buffersize = 4096, /* actual size seen is 3948 */ } } }, }}, } }, .power_ctrl = af9005_power_ctrl, .identify_state = af9005_identify_state, .i2c_algo = &af9005_i2c_algo, .rc.legacy = { .rc_interval = 200, .rc_map_table = NULL, .rc_map_size = 0, .rc_query = af9005_rc_query, }, .generic_bulk_ctrl_endpoint = 2, .generic_bulk_ctrl_endpoint_response = 1, .num_device_descs = 3, .devices = { {.name = "Afatech DVB-T USB1.1 stick", .cold_ids = {&af9005_usb_table[AFATECH_AF9005], NULL}, .warm_ids = {NULL}, }, {.name = "TerraTec Cinergy T USB XE", .cold_ids = {&af9005_usb_table[TERRATEC_AF9005], NULL}, .warm_ids = {NULL}, }, {.name = "Ansonic DVB-T USB1.1 stick", .cold_ids = {&af9005_usb_table[ANSONIC_AF9005], NULL}, .warm_ids = {NULL}, }, {NULL}, } }; /* usb specific object needed to register this driver with the usb subsystem */ static struct usb_driver af9005_usb_driver = { .name = "dvb_usb_af9005", .probe = af9005_usb_probe, .disconnect = dvb_usb_device_exit, .id_table = af9005_usb_table, }; /* module stuff */ static int __init af9005_usb_module_init(void) { int result; if ((result = usb_register(&af9005_usb_driver))) { err("usb_register failed. (%d)", result); return result; } rc_decode = symbol_request(af9005_rc_decode); rc_keys = symbol_request(rc_map_af9005_table); rc_keys_size = symbol_request(rc_map_af9005_table_size); if (rc_decode == NULL || rc_keys == NULL || rc_keys_size == NULL) { err("af9005_rc_decode function not found, disabling remote"); af9005_properties.rc.legacy.rc_query = NULL; } else { af9005_properties.rc.legacy.rc_map_table = rc_keys; af9005_properties.rc.legacy.rc_map_size = *rc_keys_size; } return 0; } static void __exit af9005_usb_module_exit(void) { /* release rc decode symbols */ if (rc_decode != NULL) symbol_put(af9005_rc_decode); if (rc_keys != NULL) symbol_put(rc_map_af9005_table); if (rc_keys_size != NULL) symbol_put(rc_map_af9005_table_size); /* deregister this driver from the USB subsystem */ usb_deregister(&af9005_usb_driver); } module_init(af9005_usb_module_init); module_exit(af9005_usb_module_exit); MODULE_AUTHOR("Luca Olivetti "); MODULE_DESCRIPTION("Driver for Afatech 9005 DVB-T USB1.1 stick"); MODULE_VERSION("1.0"); MODULE_LICENSE("GPL");