/* * Auvitek AU0828 USB Bridge (Analog video support) * * Copyright (C) 2009 Devin Heitmueller * Copyright (C) 2005-2008 Auvitek International, Ltd. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * As published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA * 02110-1301, USA. */ /* Developer Notes: * * The hardware scaler supported is unimplemented * AC97 audio support is unimplemented (only i2s audio mode) * */ #include "au0828.h" #include #include #include #include #include #include #include #include #include "au0828-reg.h" static DEFINE_MUTEX(au0828_sysfs_lock); /* ------------------------------------------------------------------ Videobuf operations ------------------------------------------------------------------*/ static unsigned int isoc_debug; module_param(isoc_debug, int, 0644); MODULE_PARM_DESC(isoc_debug, "enable debug messages [isoc transfers]"); #define au0828_isocdbg(fmt, arg...) \ do {\ if (isoc_debug) { \ pr_info("au0828 %s :"fmt, \ __func__ , ##arg); \ } \ } while (0) static inline void i2c_gate_ctrl(struct au0828_dev *dev, int val) { if (dev->dvb.frontend && dev->dvb.frontend->ops.analog_ops.i2c_gate_ctrl) dev->dvb.frontend->ops.analog_ops.i2c_gate_ctrl(dev->dvb.frontend, val); } static inline void print_err_status(struct au0828_dev *dev, int packet, int status) { char *errmsg = "Unknown"; switch (status) { case -ENOENT: errmsg = "unlinked synchronuously"; break; case -ECONNRESET: errmsg = "unlinked asynchronuously"; break; case -ENOSR: errmsg = "Buffer error (overrun)"; break; case -EPIPE: errmsg = "Stalled (device not responding)"; break; case -EOVERFLOW: errmsg = "Babble (bad cable?)"; break; case -EPROTO: errmsg = "Bit-stuff error (bad cable?)"; break; case -EILSEQ: errmsg = "CRC/Timeout (could be anything)"; break; case -ETIME: errmsg = "Device does not respond"; break; } if (packet < 0) { au0828_isocdbg("URB status %d [%s].\n", status, errmsg); } else { au0828_isocdbg("URB packet %d, status %d [%s].\n", packet, status, errmsg); } } static int check_dev(struct au0828_dev *dev) { if (dev->dev_state & DEV_DISCONNECTED) { pr_info("v4l2 ioctl: device not present\n"); return -ENODEV; } if (dev->dev_state & DEV_MISCONFIGURED) { pr_info("v4l2 ioctl: device is misconfigured; " "close and open it again\n"); return -EIO; } return 0; } /* * IRQ callback, called by URB callback */ static void au0828_irq_callback(struct urb *urb) { struct au0828_dmaqueue *dma_q = urb->context; struct au0828_dev *dev = container_of(dma_q, struct au0828_dev, vidq); unsigned long flags = 0; int i; switch (urb->status) { case 0: /* success */ case -ETIMEDOUT: /* NAK */ break; case -ECONNRESET: /* kill */ case -ENOENT: case -ESHUTDOWN: au0828_isocdbg("au0828_irq_callback called: status kill\n"); return; default: /* unknown error */ au0828_isocdbg("urb completition error %d.\n", urb->status); break; } /* Copy data from URB */ spin_lock_irqsave(&dev->slock, flags); dev->isoc_ctl.isoc_copy(dev, urb); spin_unlock_irqrestore(&dev->slock, flags); /* Reset urb buffers */ for (i = 0; i < urb->number_of_packets; i++) { urb->iso_frame_desc[i].status = 0; urb->iso_frame_desc[i].actual_length = 0; } urb->status = 0; urb->status = usb_submit_urb(urb, GFP_ATOMIC); if (urb->status) { au0828_isocdbg("urb resubmit failed (error=%i)\n", urb->status); } dev->stream_state = STREAM_ON; } /* * Stop and Deallocate URBs */ static void au0828_uninit_isoc(struct au0828_dev *dev) { struct urb *urb; int i; au0828_isocdbg("au0828: called au0828_uninit_isoc\n"); dev->isoc_ctl.nfields = -1; for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { urb = dev->isoc_ctl.urb[i]; if (urb) { if (!irqs_disabled()) usb_kill_urb(urb); else usb_unlink_urb(urb); if (dev->isoc_ctl.transfer_buffer[i]) { usb_free_coherent(dev->usbdev, urb->transfer_buffer_length, dev->isoc_ctl.transfer_buffer[i], urb->transfer_dma); } usb_free_urb(urb); dev->isoc_ctl.urb[i] = NULL; } dev->isoc_ctl.transfer_buffer[i] = NULL; } kfree(dev->isoc_ctl.urb); kfree(dev->isoc_ctl.transfer_buffer); dev->isoc_ctl.urb = NULL; dev->isoc_ctl.transfer_buffer = NULL; dev->isoc_ctl.num_bufs = 0; dev->stream_state = STREAM_OFF; } /* * Allocate URBs and start IRQ */ static int au0828_init_isoc(struct au0828_dev *dev, int max_packets, int num_bufs, int max_pkt_size, int (*isoc_copy) (struct au0828_dev *dev, struct urb *urb)) { struct au0828_dmaqueue *dma_q = &dev->vidq; int i; int sb_size, pipe; struct urb *urb; int j, k; int rc; au0828_isocdbg("au0828: called au0828_prepare_isoc\n"); dev->isoc_ctl.isoc_copy = isoc_copy; dev->isoc_ctl.num_bufs = num_bufs; dev->isoc_ctl.urb = kzalloc(sizeof(void *)*num_bufs, GFP_KERNEL); if (!dev->isoc_ctl.urb) { au0828_isocdbg("cannot alloc memory for usb buffers\n"); return -ENOMEM; } dev->isoc_ctl.transfer_buffer = kzalloc(sizeof(void *)*num_bufs, GFP_KERNEL); if (!dev->isoc_ctl.transfer_buffer) { au0828_isocdbg("cannot allocate memory for usb transfer\n"); kfree(dev->isoc_ctl.urb); return -ENOMEM; } dev->isoc_ctl.max_pkt_size = max_pkt_size; dev->isoc_ctl.buf = NULL; sb_size = max_packets * dev->isoc_ctl.max_pkt_size; /* allocate urbs and transfer buffers */ for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { urb = usb_alloc_urb(max_packets, GFP_KERNEL); if (!urb) { au0828_isocdbg("cannot alloc isoc_ctl.urb %i\n", i); au0828_uninit_isoc(dev); return -ENOMEM; } dev->isoc_ctl.urb[i] = urb; dev->isoc_ctl.transfer_buffer[i] = usb_alloc_coherent(dev->usbdev, sb_size, GFP_KERNEL, &urb->transfer_dma); if (!dev->isoc_ctl.transfer_buffer[i]) { printk("unable to allocate %i bytes for transfer" " buffer %i%s\n", sb_size, i, in_interrupt() ? " while in int" : ""); au0828_uninit_isoc(dev); return -ENOMEM; } memset(dev->isoc_ctl.transfer_buffer[i], 0, sb_size); pipe = usb_rcvisocpipe(dev->usbdev, dev->isoc_in_endpointaddr), usb_fill_int_urb(urb, dev->usbdev, pipe, dev->isoc_ctl.transfer_buffer[i], sb_size, au0828_irq_callback, dma_q, 1); urb->number_of_packets = max_packets; urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP; k = 0; for (j = 0; j < max_packets; j++) { urb->iso_frame_desc[j].offset = k; urb->iso_frame_desc[j].length = dev->isoc_ctl.max_pkt_size; k += dev->isoc_ctl.max_pkt_size; } } /* submit urbs and enables IRQ */ for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { rc = usb_submit_urb(dev->isoc_ctl.urb[i], GFP_ATOMIC); if (rc) { au0828_isocdbg("submit of urb %i failed (error=%i)\n", i, rc); au0828_uninit_isoc(dev); return rc; } } return 0; } /* * Announces that a buffer were filled and request the next */ static inline void buffer_filled(struct au0828_dev *dev, struct au0828_dmaqueue *dma_q, struct au0828_buffer *buf) { struct vb2_buffer vb = buf->vb; struct vb2_queue *q = vb.vb2_queue; /* Advice that buffer was filled */ au0828_isocdbg("[%p/%d] wakeup\n", buf, buf->top_field); if (q->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) vb.v4l2_buf.sequence = dev->frame_count++; else vb.v4l2_buf.sequence = dev->vbi_frame_count++; vb.v4l2_buf.field = V4L2_FIELD_INTERLACED; v4l2_get_timestamp(&vb.v4l2_buf.timestamp); vb2_buffer_done(&vb, VB2_BUF_STATE_DONE); } /* * Identify the buffer header type and properly handles */ static void au0828_copy_video(struct au0828_dev *dev, struct au0828_dmaqueue *dma_q, struct au0828_buffer *buf, unsigned char *p, unsigned char *outp, unsigned long len) { void *fieldstart, *startwrite, *startread; int linesdone, currlinedone, offset, lencopy, remain; int bytesperline = dev->width << 1; /* Assumes 16-bit depth @@@@ */ if (len == 0) return; if (dma_q->pos + len > buf->length) len = buf->length - dma_q->pos; startread = p; remain = len; /* Interlaces frame */ if (buf->top_field) fieldstart = outp; else fieldstart = outp + bytesperline; linesdone = dma_q->pos / bytesperline; currlinedone = dma_q->pos % bytesperline; offset = linesdone * bytesperline * 2 + currlinedone; startwrite = fieldstart + offset; lencopy = bytesperline - currlinedone; lencopy = lencopy > remain ? remain : lencopy; if ((char *)startwrite + lencopy > (char *)outp + buf->length) { au0828_isocdbg("Overflow of %zi bytes past buffer end (1)\n", ((char *)startwrite + lencopy) - ((char *)outp + buf->length)); remain = (char *)outp + buf->length - (char *)startwrite; lencopy = remain; } if (lencopy <= 0) return; memcpy(startwrite, startread, lencopy); remain -= lencopy; while (remain > 0) { startwrite += lencopy + bytesperline; startread += lencopy; if (bytesperline > remain) lencopy = remain; else lencopy = bytesperline; if ((char *)startwrite + lencopy > (char *)outp + buf->length) { au0828_isocdbg("Overflow %zi bytes past buf end (2)\n", ((char *)startwrite + lencopy) - ((char *)outp + buf->length)); lencopy = remain = (char *)outp + buf->length - (char *)startwrite; } if (lencopy <= 0) break; memcpy(startwrite, startread, lencopy); remain -= lencopy; } if (offset > 1440) { /* We have enough data to check for greenscreen */ if (outp[0] < 0x60 && outp[1440] < 0x60) dev->greenscreen_detected = 1; } dma_q->pos += len; } /* * video-buf generic routine to get the next available buffer */ static inline void get_next_buf(struct au0828_dmaqueue *dma_q, struct au0828_buffer **buf) { struct au0828_dev *dev = container_of(dma_q, struct au0828_dev, vidq); if (list_empty(&dma_q->active)) { au0828_isocdbg("No active queue to serve\n"); dev->isoc_ctl.buf = NULL; *buf = NULL; return; } /* Get the next buffer */ *buf = list_entry(dma_q->active.next, struct au0828_buffer, list); /* Cleans up buffer - Useful for testing for frame/URB loss */ list_del(&(*buf)->list); dma_q->pos = 0; (*buf)->vb_buf = (*buf)->mem; dev->isoc_ctl.buf = *buf; return; } static void au0828_copy_vbi(struct au0828_dev *dev, struct au0828_dmaqueue *dma_q, struct au0828_buffer *buf, unsigned char *p, unsigned char *outp, unsigned long len) { unsigned char *startwrite, *startread; int bytesperline; int i, j = 0; if (dev == NULL) { au0828_isocdbg("dev is null\n"); return; } if (dma_q == NULL) { au0828_isocdbg("dma_q is null\n"); return; } if (buf == NULL) return; if (p == NULL) { au0828_isocdbg("p is null\n"); return; } if (outp == NULL) { au0828_isocdbg("outp is null\n"); return; } bytesperline = dev->vbi_width; if (dma_q->pos + len > buf->length) len = buf->length - dma_q->pos; startread = p; startwrite = outp + (dma_q->pos / 2); /* Make sure the bottom field populates the second half of the frame */ if (buf->top_field == 0) startwrite += bytesperline * dev->vbi_height; for (i = 0; i < len; i += 2) startwrite[j++] = startread[i+1]; dma_q->pos += len; } /* * video-buf generic routine to get the next available VBI buffer */ static inline void vbi_get_next_buf(struct au0828_dmaqueue *dma_q, struct au0828_buffer **buf) { struct au0828_dev *dev = container_of(dma_q, struct au0828_dev, vbiq); if (list_empty(&dma_q->active)) { au0828_isocdbg("No active queue to serve\n"); dev->isoc_ctl.vbi_buf = NULL; *buf = NULL; return; } /* Get the next buffer */ *buf = list_entry(dma_q->active.next, struct au0828_buffer, list); /* Cleans up buffer - Useful for testing for frame/URB loss */ list_del(&(*buf)->list); dma_q->pos = 0; (*buf)->vb_buf = (*buf)->mem; dev->isoc_ctl.vbi_buf = *buf; return; } /* * Controls the isoc copy of each urb packet */ static inline int au0828_isoc_copy(struct au0828_dev *dev, struct urb *urb) { struct au0828_buffer *buf; struct au0828_buffer *vbi_buf; struct au0828_dmaqueue *dma_q = urb->context; struct au0828_dmaqueue *vbi_dma_q = &dev->vbiq; unsigned char *outp = NULL; unsigned char *vbioutp = NULL; int i, len = 0, rc = 1; unsigned char *p; unsigned char fbyte; unsigned int vbi_field_size; unsigned int remain, lencopy; if (!dev) return 0; if ((dev->dev_state & DEV_DISCONNECTED) || (dev->dev_state & DEV_MISCONFIGURED)) return 0; if (urb->status < 0) { print_err_status(dev, -1, urb->status); if (urb->status == -ENOENT) return 0; } buf = dev->isoc_ctl.buf; if (buf != NULL) outp = vb2_plane_vaddr(&buf->vb, 0); vbi_buf = dev->isoc_ctl.vbi_buf; if (vbi_buf != NULL) vbioutp = vb2_plane_vaddr(&vbi_buf->vb, 0); for (i = 0; i < urb->number_of_packets; i++) { int status = urb->iso_frame_desc[i].status; if (status < 0) { print_err_status(dev, i, status); if (urb->iso_frame_desc[i].status != -EPROTO) continue; } if (urb->iso_frame_desc[i].actual_length <= 0) continue; if (urb->iso_frame_desc[i].actual_length > dev->max_pkt_size) { au0828_isocdbg("packet bigger than packet size"); continue; } p = urb->transfer_buffer + urb->iso_frame_desc[i].offset; fbyte = p[0]; len = urb->iso_frame_desc[i].actual_length - 4; p += 4; if (fbyte & 0x80) { len -= 4; p += 4; au0828_isocdbg("Video frame %s\n", (fbyte & 0x40) ? "odd" : "even"); if (fbyte & 0x40) { /* VBI */ if (vbi_buf != NULL) buffer_filled(dev, vbi_dma_q, vbi_buf); vbi_get_next_buf(vbi_dma_q, &vbi_buf); if (vbi_buf == NULL) vbioutp = NULL; else vbioutp = vb2_plane_vaddr( &vbi_buf->vb, 0); /* Video */ if (buf != NULL) buffer_filled(dev, dma_q, buf); get_next_buf(dma_q, &buf); if (buf == NULL) outp = NULL; else outp = vb2_plane_vaddr(&buf->vb, 0); /* As long as isoc traffic is arriving, keep resetting the timer */ if (dev->vid_timeout_running) mod_timer(&dev->vid_timeout, jiffies + (HZ / 10)); if (dev->vbi_timeout_running) mod_timer(&dev->vbi_timeout, jiffies + (HZ / 10)); } if (buf != NULL) { if (fbyte & 0x40) buf->top_field = 1; else buf->top_field = 0; } if (vbi_buf != NULL) { if (fbyte & 0x40) vbi_buf->top_field = 1; else vbi_buf->top_field = 0; } dev->vbi_read = 0; vbi_dma_q->pos = 0; dma_q->pos = 0; } vbi_field_size = dev->vbi_width * dev->vbi_height * 2; if (dev->vbi_read < vbi_field_size) { remain = vbi_field_size - dev->vbi_read; if (len < remain) lencopy = len; else lencopy = remain; if (vbi_buf != NULL) au0828_copy_vbi(dev, vbi_dma_q, vbi_buf, p, vbioutp, len); len -= lencopy; p += lencopy; dev->vbi_read += lencopy; } if (dev->vbi_read >= vbi_field_size && buf != NULL) au0828_copy_video(dev, dma_q, buf, p, outp, len); } return rc; } static int queue_setup(struct vb2_queue *vq, const struct v4l2_format *fmt, unsigned int *nbuffers, unsigned int *nplanes, unsigned int sizes[], void *alloc_ctxs[]) { struct au0828_dev *dev = vb2_get_drv_priv(vq); unsigned long img_size = dev->height * dev->bytesperline; unsigned long size; size = fmt ? fmt->fmt.pix.sizeimage : img_size; if (size < img_size) return -EINVAL; *nplanes = 1; sizes[0] = size; return 0; } static int buffer_prepare(struct vb2_buffer *vb) { struct au0828_buffer *buf = container_of(vb, struct au0828_buffer, vb); struct au0828_dev *dev = vb2_get_drv_priv(vb->vb2_queue); buf->length = dev->height * dev->bytesperline; if (vb2_plane_size(vb, 0) < buf->length) { pr_err("%s data will not fit into plane (%lu < %lu)\n", __func__, vb2_plane_size(vb, 0), buf->length); return -EINVAL; } vb2_set_plane_payload(&buf->vb, 0, buf->length); return 0; } static void buffer_queue(struct vb2_buffer *vb) { struct au0828_buffer *buf = container_of(vb, struct au0828_buffer, vb); struct au0828_dev *dev = vb2_get_drv_priv(vb->vb2_queue); struct au0828_dmaqueue *vidq = &dev->vidq; unsigned long flags = 0; buf->mem = vb2_plane_vaddr(vb, 0); buf->length = vb2_plane_size(vb, 0); spin_lock_irqsave(&dev->slock, flags); list_add_tail(&buf->list, &vidq->active); spin_unlock_irqrestore(&dev->slock, flags); } static int au0828_i2s_init(struct au0828_dev *dev) { /* Enable i2s mode */ au0828_writereg(dev, AU0828_AUDIOCTRL_50C, 0x01); return 0; } /* * Auvitek au0828 analog stream enable */ static int au0828_analog_stream_enable(struct au0828_dev *d) { struct usb_interface *iface; int ret, h, w; dprintk(1, "au0828_analog_stream_enable called\n"); iface = usb_ifnum_to_if(d->usbdev, 0); if (iface && iface->cur_altsetting->desc.bAlternateSetting != 5) { dprintk(1, "Changing intf#0 to alt 5\n"); /* set au0828 interface0 to AS5 here again */ ret = usb_set_interface(d->usbdev, 0, 5); if (ret < 0) { pr_info("Au0828 can't set alt setting to 5!\n"); return -EBUSY; } } h = d->height / 2 + 2; w = d->width * 2; au0828_writereg(d, AU0828_SENSORCTRL_VBI_103, 0x00); au0828_writereg(d, 0x106, 0x00); /* set x position */ au0828_writereg(d, 0x110, 0x00); au0828_writereg(d, 0x111, 0x00); au0828_writereg(d, 0x114, w & 0xff); au0828_writereg(d, 0x115, w >> 8); /* set y position */ au0828_writereg(d, 0x112, 0x00); au0828_writereg(d, 0x113, 0x00); au0828_writereg(d, 0x116, h & 0xff); au0828_writereg(d, 0x117, h >> 8); au0828_writereg(d, AU0828_SENSORCTRL_100, 0xb3); return 0; } static int au0828_analog_stream_disable(struct au0828_dev *d) { dprintk(1, "au0828_analog_stream_disable called\n"); au0828_writereg(d, AU0828_SENSORCTRL_100, 0x0); return 0; } static void au0828_analog_stream_reset(struct au0828_dev *dev) { dprintk(1, "au0828_analog_stream_reset called\n"); au0828_writereg(dev, AU0828_SENSORCTRL_100, 0x0); mdelay(30); au0828_writereg(dev, AU0828_SENSORCTRL_100, 0xb3); } /* * Some operations needs to stop current streaming */ static int au0828_stream_interrupt(struct au0828_dev *dev) { int ret = 0; dev->stream_state = STREAM_INTERRUPT; if (dev->dev_state == DEV_DISCONNECTED) return -ENODEV; else if (ret) { dev->dev_state = DEV_MISCONFIGURED; dprintk(1, "%s device is misconfigured!\n", __func__); return ret; } return 0; } int au0828_start_analog_streaming(struct vb2_queue *vq, unsigned int count) { struct au0828_dev *dev = vb2_get_drv_priv(vq); int rc = 0; dprintk(1, "au0828_start_analog_streaming called %d\n", dev->streaming_users); if (vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) dev->frame_count = 0; else dev->vbi_frame_count = 0; if (dev->streaming_users == 0) { /* If we were doing ac97 instead of i2s, it would go here...*/ au0828_i2s_init(dev); rc = au0828_init_isoc(dev, AU0828_ISO_PACKETS_PER_URB, AU0828_MAX_ISO_BUFS, dev->max_pkt_size, au0828_isoc_copy); if (rc < 0) { pr_info("au0828_init_isoc failed\n"); return rc; } if (vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_stream, 1); dev->vid_timeout_running = 1; mod_timer(&dev->vid_timeout, jiffies + (HZ / 10)); } else if (vq->type == V4L2_BUF_TYPE_VBI_CAPTURE) { dev->vbi_timeout_running = 1; mod_timer(&dev->vbi_timeout, jiffies + (HZ / 10)); } } dev->streaming_users++; return rc; } static void au0828_stop_streaming(struct vb2_queue *vq) { struct au0828_dev *dev = vb2_get_drv_priv(vq); struct au0828_dmaqueue *vidq = &dev->vidq; unsigned long flags = 0; dprintk(1, "au0828_stop_streaming called %d\n", dev->streaming_users); if (dev->streaming_users-- == 1) au0828_uninit_isoc(dev); v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_stream, 0); dev->vid_timeout_running = 0; del_timer_sync(&dev->vid_timeout); spin_lock_irqsave(&dev->slock, flags); if (dev->isoc_ctl.buf != NULL) { vb2_buffer_done(&dev->isoc_ctl.buf->vb, VB2_BUF_STATE_ERROR); dev->isoc_ctl.buf = NULL; } while (!list_empty(&vidq->active)) { struct au0828_buffer *buf; buf = list_entry(vidq->active.next, struct au0828_buffer, list); vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR); list_del(&buf->list); } spin_unlock_irqrestore(&dev->slock, flags); } void au0828_stop_vbi_streaming(struct vb2_queue *vq) { struct au0828_dev *dev = vb2_get_drv_priv(vq); struct au0828_dmaqueue *vbiq = &dev->vbiq; unsigned long flags = 0; dprintk(1, "au0828_stop_vbi_streaming called %d\n", dev->streaming_users); if (dev->streaming_users-- == 1) au0828_uninit_isoc(dev); spin_lock_irqsave(&dev->slock, flags); if (dev->isoc_ctl.vbi_buf != NULL) { vb2_buffer_done(&dev->isoc_ctl.vbi_buf->vb, VB2_BUF_STATE_ERROR); dev->isoc_ctl.vbi_buf = NULL; } while (!list_empty(&vbiq->active)) { struct au0828_buffer *buf; buf = list_entry(vbiq->active.next, struct au0828_buffer, list); list_del(&buf->list); vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR); } spin_unlock_irqrestore(&dev->slock, flags); dev->vbi_timeout_running = 0; del_timer_sync(&dev->vbi_timeout); } static struct vb2_ops au0828_video_qops = { .queue_setup = queue_setup, .buf_prepare = buffer_prepare, .buf_queue = buffer_queue, .start_streaming = au0828_start_analog_streaming, .stop_streaming = au0828_stop_streaming, .wait_prepare = vb2_ops_wait_prepare, .wait_finish = vb2_ops_wait_finish, }; /* ------------------------------------------------------------------ V4L2 interface ------------------------------------------------------------------*/ /* * au0828_analog_unregister * unregister v4l2 devices */ void au0828_analog_unregister(struct au0828_dev *dev) { dprintk(1, "au0828_analog_unregister called\n"); mutex_lock(&au0828_sysfs_lock); video_unregister_device(&dev->vdev); video_unregister_device(&dev->vbi_dev); mutex_unlock(&au0828_sysfs_lock); } /* This function ensures that video frames continue to be delivered even if the ITU-656 input isn't receiving any data (thereby preventing applications such as tvtime from hanging) */ static void au0828_vid_buffer_timeout(unsigned long data) { struct au0828_dev *dev = (struct au0828_dev *) data; struct au0828_dmaqueue *dma_q = &dev->vidq; struct au0828_buffer *buf; unsigned char *vid_data; unsigned long flags = 0; spin_lock_irqsave(&dev->slock, flags); buf = dev->isoc_ctl.buf; if (buf != NULL) { vid_data = vb2_plane_vaddr(&buf->vb, 0); memset(vid_data, 0x00, buf->length); /* Blank green frame */ buffer_filled(dev, dma_q, buf); } get_next_buf(dma_q, &buf); if (dev->vid_timeout_running == 1) mod_timer(&dev->vid_timeout, jiffies + (HZ / 10)); spin_unlock_irqrestore(&dev->slock, flags); } static void au0828_vbi_buffer_timeout(unsigned long data) { struct au0828_dev *dev = (struct au0828_dev *) data; struct au0828_dmaqueue *dma_q = &dev->vbiq; struct au0828_buffer *buf; unsigned char *vbi_data; unsigned long flags = 0; spin_lock_irqsave(&dev->slock, flags); buf = dev->isoc_ctl.vbi_buf; if (buf != NULL) { vbi_data = vb2_plane_vaddr(&buf->vb, 0); memset(vbi_data, 0x00, buf->length); buffer_filled(dev, dma_q, buf); } vbi_get_next_buf(dma_q, &buf); if (dev->vbi_timeout_running == 1) mod_timer(&dev->vbi_timeout, jiffies + (HZ / 10)); spin_unlock_irqrestore(&dev->slock, flags); } static int au0828_v4l2_open(struct file *filp) { struct au0828_dev *dev = video_drvdata(filp); int ret; dprintk(1, "%s called std_set %d dev_state %d stream users %d users %d\n", __func__, dev->std_set_in_tuner_core, dev->dev_state, dev->streaming_users, dev->users); if (mutex_lock_interruptible(&dev->lock)) return -ERESTARTSYS; ret = v4l2_fh_open(filp); if (ret) { au0828_isocdbg("%s: v4l2_fh_open() returned error %d\n", __func__, ret); mutex_unlock(&dev->lock); return ret; } if (dev->users == 0) { au0828_analog_stream_enable(dev); au0828_analog_stream_reset(dev); dev->stream_state = STREAM_OFF; dev->dev_state |= DEV_INITIALIZED; } dev->users++; mutex_unlock(&dev->lock); return ret; } static int au0828_v4l2_close(struct file *filp) { int ret; struct au0828_dev *dev = video_drvdata(filp); struct video_device *vdev = video_devdata(filp); dprintk(1, "%s called std_set %d dev_state %d stream users %d users %d\n", __func__, dev->std_set_in_tuner_core, dev->dev_state, dev->streaming_users, dev->users); mutex_lock(&dev->lock); if (vdev->vfl_type == VFL_TYPE_GRABBER && dev->vid_timeout_running) { /* Cancel timeout thread in case they didn't call streamoff */ dev->vid_timeout_running = 0; del_timer_sync(&dev->vid_timeout); } else if (vdev->vfl_type == VFL_TYPE_VBI && dev->vbi_timeout_running) { /* Cancel timeout thread in case they didn't call streamoff */ dev->vbi_timeout_running = 0; del_timer_sync(&dev->vbi_timeout); } if (dev->dev_state == DEV_DISCONNECTED) goto end; if (dev->users == 1) { /* Save some power by putting tuner to sleep */ v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_power, 0); dev->std_set_in_tuner_core = 0; /* When close the device, set the usb intf0 into alt0 to free USB bandwidth */ ret = usb_set_interface(dev->usbdev, 0, 0); if (ret < 0) pr_info("Au0828 can't set alternate to 0!\n"); } end: _vb2_fop_release(filp, NULL); dev->users--; mutex_unlock(&dev->lock); return 0; } /* Must be called with dev->lock held */ static void au0828_init_tuner(struct au0828_dev *dev) { struct v4l2_frequency f = { .frequency = dev->ctrl_freq, .type = V4L2_TUNER_ANALOG_TV, }; dprintk(1, "%s called std_set %d dev_state %d\n", __func__, dev->std_set_in_tuner_core, dev->dev_state); if (dev->std_set_in_tuner_core) return; dev->std_set_in_tuner_core = 1; i2c_gate_ctrl(dev, 1); /* If we've never sent the standard in tuner core, do so now. We don't do this at device probe because we don't want to incur the cost of a firmware load */ v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_std, dev->std); v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f); i2c_gate_ctrl(dev, 0); } static int au0828_set_format(struct au0828_dev *dev, unsigned int cmd, struct v4l2_format *format) { int ret; int width = format->fmt.pix.width; int height = format->fmt.pix.height; /* If they are demanding a format other than the one we support, bail out (tvtime asks for UYVY and then retries with YUYV) */ if (format->fmt.pix.pixelformat != V4L2_PIX_FMT_UYVY) return -EINVAL; /* format->fmt.pix.width only support 720 and height 480 */ if (width != 720) width = 720; if (height != 480) height = 480; format->fmt.pix.width = width; format->fmt.pix.height = height; format->fmt.pix.pixelformat = V4L2_PIX_FMT_UYVY; format->fmt.pix.bytesperline = width * 2; format->fmt.pix.sizeimage = width * height * 2; format->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; format->fmt.pix.field = V4L2_FIELD_INTERLACED; format->fmt.pix.priv = 0; if (cmd == VIDIOC_TRY_FMT) return 0; /* maybe set new image format, driver current only support 720*480 */ dev->width = width; dev->height = height; dev->frame_size = width * height * 2; dev->field_size = width * height; dev->bytesperline = width * 2; if (dev->stream_state == STREAM_ON) { dprintk(1, "VIDIOC_SET_FMT: interrupting stream!\n"); ret = au0828_stream_interrupt(dev); if (ret != 0) { dprintk(1, "error interrupting video stream!\n"); return ret; } } au0828_analog_stream_enable(dev); return 0; } static int vidioc_querycap(struct file *file, void *priv, struct v4l2_capability *cap) { struct video_device *vdev = video_devdata(file); struct au0828_dev *dev = video_drvdata(file); dprintk(1, "%s called std_set %d dev_state %d\n", __func__, dev->std_set_in_tuner_core, dev->dev_state); strlcpy(cap->driver, "au0828", sizeof(cap->driver)); strlcpy(cap->card, dev->board.name, sizeof(cap->card)); usb_make_path(dev->usbdev, cap->bus_info, sizeof(cap->bus_info)); /* set the device capabilities */ cap->device_caps = V4L2_CAP_AUDIO | V4L2_CAP_READWRITE | V4L2_CAP_STREAMING | V4L2_CAP_TUNER; if (vdev->vfl_type == VFL_TYPE_GRABBER) cap->device_caps |= V4L2_CAP_VIDEO_CAPTURE; else cap->device_caps |= V4L2_CAP_VBI_CAPTURE; cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS | V4L2_CAP_VBI_CAPTURE | V4L2_CAP_VIDEO_CAPTURE; return 0; } static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, struct v4l2_fmtdesc *f) { if (f->index) return -EINVAL; dprintk(1, "%s called\n", __func__); f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; strcpy(f->description, "Packed YUV2"); f->flags = 0; f->pixelformat = V4L2_PIX_FMT_UYVY; return 0; } static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f) { struct au0828_dev *dev = video_drvdata(file); dprintk(1, "%s called std_set %d dev_state %d\n", __func__, dev->std_set_in_tuner_core, dev->dev_state); f->fmt.pix.width = dev->width; f->fmt.pix.height = dev->height; f->fmt.pix.pixelformat = V4L2_PIX_FMT_UYVY; f->fmt.pix.bytesperline = dev->bytesperline; f->fmt.pix.sizeimage = dev->frame_size; f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; /* NTSC/PAL */ f->fmt.pix.field = V4L2_FIELD_INTERLACED; f->fmt.pix.priv = 0; return 0; } static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f) { struct au0828_dev *dev = video_drvdata(file); dprintk(1, "%s called std_set %d dev_state %d\n", __func__, dev->std_set_in_tuner_core, dev->dev_state); return au0828_set_format(dev, VIDIOC_TRY_FMT, f); } static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, struct v4l2_format *f) { struct au0828_dev *dev = video_drvdata(file); int rc; dprintk(1, "%s called std_set %d dev_state %d\n", __func__, dev->std_set_in_tuner_core, dev->dev_state); rc = check_dev(dev); if (rc < 0) return rc; if (vb2_is_busy(&dev->vb_vidq)) { pr_info("%s queue busy\n", __func__); rc = -EBUSY; goto out; } rc = au0828_set_format(dev, VIDIOC_S_FMT, f); out: return rc; } static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id norm) { struct au0828_dev *dev = video_drvdata(file); dprintk(1, "%s called std_set %d dev_state %d\n", __func__, dev->std_set_in_tuner_core, dev->dev_state); if (norm == dev->std) return 0; if (dev->streaming_users > 0) return -EBUSY; dev->std = norm; au0828_init_tuner(dev); i2c_gate_ctrl(dev, 1); /* * FIXME: when we support something other than 60Hz standards, * we are going to have to make the au0828 bridge adjust the size * of its capture buffer, which is currently hardcoded at 720x480 */ v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_std, norm); i2c_gate_ctrl(dev, 0); return 0; } static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *norm) { struct au0828_dev *dev = video_drvdata(file); dprintk(1, "%s called std_set %d dev_state %d\n", __func__, dev->std_set_in_tuner_core, dev->dev_state); *norm = dev->std; return 0; } static int vidioc_enum_input(struct file *file, void *priv, struct v4l2_input *input) { struct au0828_dev *dev = video_drvdata(file); unsigned int tmp; static const char *inames[] = { [AU0828_VMUX_UNDEFINED] = "Undefined", [AU0828_VMUX_COMPOSITE] = "Composite", [AU0828_VMUX_SVIDEO] = "S-Video", [AU0828_VMUX_CABLE] = "Cable TV", [AU0828_VMUX_TELEVISION] = "Television", [AU0828_VMUX_DVB] = "DVB", [AU0828_VMUX_DEBUG] = "tv debug" }; dprintk(1, "%s called std_set %d dev_state %d\n", __func__, dev->std_set_in_tuner_core, dev->dev_state); tmp = input->index; if (tmp >= AU0828_MAX_INPUT) return -EINVAL; if (AUVI_INPUT(tmp).type == 0) return -EINVAL; input->index = tmp; strcpy(input->name, inames[AUVI_INPUT(tmp).type]); if ((AUVI_INPUT(tmp).type == AU0828_VMUX_TELEVISION) || (AUVI_INPUT(tmp).type == AU0828_VMUX_CABLE)) { input->type |= V4L2_INPUT_TYPE_TUNER; input->audioset = 1; } else { input->type |= V4L2_INPUT_TYPE_CAMERA; input->audioset = 2; } input->std = dev->vdev.tvnorms; return 0; } static int vidioc_g_input(struct file *file, void *priv, unsigned int *i) { struct au0828_dev *dev = video_drvdata(file); dprintk(1, "%s called std_set %d dev_state %d\n", __func__, dev->std_set_in_tuner_core, dev->dev_state); *i = dev->ctrl_input; return 0; } static void au0828_s_input(struct au0828_dev *dev, int index) { int i; dprintk(1, "%s called std_set %d dev_state %d\n", __func__, dev->std_set_in_tuner_core, dev->dev_state); switch (AUVI_INPUT(index).type) { case AU0828_VMUX_SVIDEO: dev->input_type = AU0828_VMUX_SVIDEO; dev->ctrl_ainput = 1; break; case AU0828_VMUX_COMPOSITE: dev->input_type = AU0828_VMUX_COMPOSITE; dev->ctrl_ainput = 1; break; case AU0828_VMUX_TELEVISION: dev->input_type = AU0828_VMUX_TELEVISION; dev->ctrl_ainput = 0; break; default: dprintk(1, "unknown input type set [%d]\n", AUVI_INPUT(index).type); break; } v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_routing, AUVI_INPUT(index).vmux, 0, 0); for (i = 0; i < AU0828_MAX_INPUT; i++) { int enable = 0; if (AUVI_INPUT(i).audio_setup == NULL) continue; if (i == index) enable = 1; else enable = 0; if (enable) { (AUVI_INPUT(i).audio_setup)(dev, enable); } else { /* Make sure we leave it turned on if some other input is routed to this callback */ if ((AUVI_INPUT(i).audio_setup) != ((AUVI_INPUT(index).audio_setup))) { (AUVI_INPUT(i).audio_setup)(dev, enable); } } } v4l2_device_call_all(&dev->v4l2_dev, 0, audio, s_routing, AUVI_INPUT(index).amux, 0, 0); } static int vidioc_s_input(struct file *file, void *priv, unsigned int index) { struct au0828_dev *dev = video_drvdata(file); dprintk(1, "VIDIOC_S_INPUT in function %s, input=%d\n", __func__, index); if (index >= AU0828_MAX_INPUT) return -EINVAL; if (AUVI_INPUT(index).type == 0) return -EINVAL; dev->ctrl_input = index; au0828_s_input(dev, index); return 0; } static int vidioc_enumaudio(struct file *file, void *priv, struct v4l2_audio *a) { if (a->index > 1) return -EINVAL; dprintk(1, "%s called\n", __func__); if (a->index == 0) strcpy(a->name, "Television"); else strcpy(a->name, "Line in"); a->capability = V4L2_AUDCAP_STEREO; return 0; } static int vidioc_g_audio(struct file *file, void *priv, struct v4l2_audio *a) { struct au0828_dev *dev = video_drvdata(file); dprintk(1, "%s called std_set %d dev_state %d\n", __func__, dev->std_set_in_tuner_core, dev->dev_state); a->index = dev->ctrl_ainput; if (a->index == 0) strcpy(a->name, "Television"); else strcpy(a->name, "Line in"); a->capability = V4L2_AUDCAP_STEREO; return 0; } static int vidioc_s_audio(struct file *file, void *priv, const struct v4l2_audio *a) { struct au0828_dev *dev = video_drvdata(file); if (a->index != dev->ctrl_ainput) return -EINVAL; dprintk(1, "%s called std_set %d dev_state %d\n", __func__, dev->std_set_in_tuner_core, dev->dev_state); return 0; } static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *t) { struct au0828_dev *dev = video_drvdata(file); if (t->index != 0) return -EINVAL; dprintk(1, "%s called std_set %d dev_state %d\n", __func__, dev->std_set_in_tuner_core, dev->dev_state); strcpy(t->name, "Auvitek tuner"); au0828_init_tuner(dev); i2c_gate_ctrl(dev, 1); v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, g_tuner, t); i2c_gate_ctrl(dev, 0); return 0; } static int vidioc_s_tuner(struct file *file, void *priv, const struct v4l2_tuner *t) { struct au0828_dev *dev = video_drvdata(file); if (t->index != 0) return -EINVAL; dprintk(1, "%s called std_set %d dev_state %d\n", __func__, dev->std_set_in_tuner_core, dev->dev_state); au0828_init_tuner(dev); i2c_gate_ctrl(dev, 1); v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_tuner, t); i2c_gate_ctrl(dev, 0); dprintk(1, "VIDIOC_S_TUNER: signal = %x, afc = %x\n", t->signal, t->afc); return 0; } static int vidioc_g_frequency(struct file *file, void *priv, struct v4l2_frequency *freq) { struct au0828_dev *dev = video_drvdata(file); if (freq->tuner != 0) return -EINVAL; dprintk(1, "%s called std_set %d dev_state %d\n", __func__, dev->std_set_in_tuner_core, dev->dev_state); freq->frequency = dev->ctrl_freq; return 0; } static int vidioc_s_frequency(struct file *file, void *priv, const struct v4l2_frequency *freq) { struct au0828_dev *dev = video_drvdata(file); struct v4l2_frequency new_freq = *freq; if (freq->tuner != 0) return -EINVAL; dprintk(1, "%s called std_set %d dev_state %d\n", __func__, dev->std_set_in_tuner_core, dev->dev_state); au0828_init_tuner(dev); i2c_gate_ctrl(dev, 1); v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, freq); /* Get the actual set (and possibly clamped) frequency */ v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, g_frequency, &new_freq); dev->ctrl_freq = new_freq.frequency; i2c_gate_ctrl(dev, 0); au0828_analog_stream_reset(dev); return 0; } /* RAW VBI ioctls */ static int vidioc_g_fmt_vbi_cap(struct file *file, void *priv, struct v4l2_format *format) { struct au0828_dev *dev = video_drvdata(file); dprintk(1, "%s called std_set %d dev_state %d\n", __func__, dev->std_set_in_tuner_core, dev->dev_state); format->fmt.vbi.samples_per_line = dev->vbi_width; format->fmt.vbi.sample_format = V4L2_PIX_FMT_GREY; format->fmt.vbi.offset = 0; format->fmt.vbi.flags = 0; format->fmt.vbi.sampling_rate = 6750000 * 4 / 2; format->fmt.vbi.count[0] = dev->vbi_height; format->fmt.vbi.count[1] = dev->vbi_height; format->fmt.vbi.start[0] = 21; format->fmt.vbi.start[1] = 284; memset(format->fmt.vbi.reserved, 0, sizeof(format->fmt.vbi.reserved)); return 0; } static int vidioc_cropcap(struct file *file, void *priv, struct v4l2_cropcap *cc) { struct au0828_dev *dev = video_drvdata(file); if (cc->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) return -EINVAL; dprintk(1, "%s called std_set %d dev_state %d\n", __func__, dev->std_set_in_tuner_core, dev->dev_state); cc->bounds.left = 0; cc->bounds.top = 0; cc->bounds.width = dev->width; cc->bounds.height = dev->height; cc->defrect = cc->bounds; cc->pixelaspect.numerator = 54; cc->pixelaspect.denominator = 59; return 0; } #ifdef CONFIG_VIDEO_ADV_DEBUG static int vidioc_g_register(struct file *file, void *priv, struct v4l2_dbg_register *reg) { struct au0828_dev *dev = video_drvdata(file); dprintk(1, "%s called std_set %d dev_state %d\n", __func__, dev->std_set_in_tuner_core, dev->dev_state); reg->val = au0828_read(dev, reg->reg); reg->size = 1; return 0; } static int vidioc_s_register(struct file *file, void *priv, const struct v4l2_dbg_register *reg) { struct au0828_dev *dev = video_drvdata(file); dprintk(1, "%s called std_set %d dev_state %d\n", __func__, dev->std_set_in_tuner_core, dev->dev_state); return au0828_writereg(dev, reg->reg, reg->val); } #endif static int vidioc_log_status(struct file *file, void *fh) { struct video_device *vdev = video_devdata(file); dprintk(1, "%s called\n", __func__); v4l2_ctrl_log_status(file, fh); v4l2_device_call_all(vdev->v4l2_dev, 0, core, log_status); return 0; } void au0828_v4l2_suspend(struct au0828_dev *dev) { struct urb *urb; int i; pr_info("stopping V4L2\n"); if (dev->stream_state == STREAM_ON) { pr_info("stopping V4L2 active URBs\n"); au0828_analog_stream_disable(dev); /* stop urbs */ for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { urb = dev->isoc_ctl.urb[i]; if (urb) { if (!irqs_disabled()) usb_kill_urb(urb); else usb_unlink_urb(urb); } } } if (dev->vid_timeout_running) del_timer_sync(&dev->vid_timeout); if (dev->vbi_timeout_running) del_timer_sync(&dev->vbi_timeout); } void au0828_v4l2_resume(struct au0828_dev *dev) { int i, rc; pr_info("restarting V4L2\n"); if (dev->stream_state == STREAM_ON) { au0828_stream_interrupt(dev); au0828_init_tuner(dev); } if (dev->vid_timeout_running) mod_timer(&dev->vid_timeout, jiffies + (HZ / 10)); if (dev->vbi_timeout_running) mod_timer(&dev->vbi_timeout, jiffies + (HZ / 10)); /* If we were doing ac97 instead of i2s, it would go here...*/ au0828_i2s_init(dev); au0828_analog_stream_enable(dev); if (!(dev->stream_state == STREAM_ON)) { au0828_analog_stream_reset(dev); /* submit urbs */ for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { rc = usb_submit_urb(dev->isoc_ctl.urb[i], GFP_ATOMIC); if (rc) { au0828_isocdbg("submit of urb %i failed (error=%i)\n", i, rc); au0828_uninit_isoc(dev); } } } } static struct v4l2_file_operations au0828_v4l_fops = { .owner = THIS_MODULE, .open = au0828_v4l2_open, .release = au0828_v4l2_close, .read = vb2_fop_read, .poll = vb2_fop_poll, .mmap = vb2_fop_mmap, .unlocked_ioctl = video_ioctl2, }; static const struct v4l2_ioctl_ops video_ioctl_ops = { .vidioc_querycap = vidioc_querycap, .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, .vidioc_g_fmt_vbi_cap = vidioc_g_fmt_vbi_cap, .vidioc_try_fmt_vbi_cap = vidioc_g_fmt_vbi_cap, .vidioc_s_fmt_vbi_cap = vidioc_g_fmt_vbi_cap, .vidioc_enumaudio = vidioc_enumaudio, .vidioc_g_audio = vidioc_g_audio, .vidioc_s_audio = vidioc_s_audio, .vidioc_cropcap = vidioc_cropcap, .vidioc_reqbufs = vb2_ioctl_reqbufs, .vidioc_create_bufs = vb2_ioctl_create_bufs, .vidioc_prepare_buf = vb2_ioctl_prepare_buf, .vidioc_querybuf = vb2_ioctl_querybuf, .vidioc_qbuf = vb2_ioctl_qbuf, .vidioc_dqbuf = vb2_ioctl_dqbuf, .vidioc_expbuf = vb2_ioctl_expbuf, .vidioc_s_std = vidioc_s_std, .vidioc_g_std = vidioc_g_std, .vidioc_enum_input = vidioc_enum_input, .vidioc_g_input = vidioc_g_input, .vidioc_s_input = vidioc_s_input, .vidioc_streamon = vb2_ioctl_streamon, .vidioc_streamoff = vb2_ioctl_streamoff, .vidioc_g_tuner = vidioc_g_tuner, .vidioc_s_tuner = vidioc_s_tuner, .vidioc_g_frequency = vidioc_g_frequency, .vidioc_s_frequency = vidioc_s_frequency, #ifdef CONFIG_VIDEO_ADV_DEBUG .vidioc_g_register = vidioc_g_register, .vidioc_s_register = vidioc_s_register, #endif .vidioc_log_status = vidioc_log_status, .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, .vidioc_unsubscribe_event = v4l2_event_unsubscribe, }; static const struct video_device au0828_video_template = { .fops = &au0828_v4l_fops, .release = video_device_release_empty, .ioctl_ops = &video_ioctl_ops, .tvnorms = V4L2_STD_NTSC_M | V4L2_STD_PAL_M, }; static int au0828_vb2_setup(struct au0828_dev *dev) { int rc; struct vb2_queue *q; /* Setup Videobuf2 for Video capture */ q = &dev->vb_vidq; q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; q->io_modes = VB2_READ | VB2_MMAP | VB2_USERPTR | VB2_DMABUF; q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; q->drv_priv = dev; q->buf_struct_size = sizeof(struct au0828_buffer); q->ops = &au0828_video_qops; q->mem_ops = &vb2_vmalloc_memops; rc = vb2_queue_init(q); if (rc < 0) return rc; /* Setup Videobuf2 for VBI capture */ q = &dev->vb_vbiq; q->type = V4L2_BUF_TYPE_VBI_CAPTURE; q->io_modes = VB2_READ | VB2_MMAP | VB2_USERPTR | VB2_DMABUF; q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; q->drv_priv = dev; q->buf_struct_size = sizeof(struct au0828_buffer); q->ops = &au0828_vbi_qops; q->mem_ops = &vb2_vmalloc_memops; rc = vb2_queue_init(q); if (rc < 0) return rc; return 0; } /**************************************************************************/ int au0828_analog_register(struct au0828_dev *dev, struct usb_interface *interface) { int retval = -ENOMEM; struct usb_host_interface *iface_desc; struct usb_endpoint_descriptor *endpoint; int i, ret; dprintk(1, "au0828_analog_register called for intf#%d!\n", interface->cur_altsetting->desc.bInterfaceNumber); /* set au0828 usb interface0 to as5 */ retval = usb_set_interface(dev->usbdev, interface->cur_altsetting->desc.bInterfaceNumber, 5); if (retval != 0) { pr_info("Failure setting usb interface0 to as5\n"); return retval; } /* Figure out which endpoint has the isoc interface */ iface_desc = interface->cur_altsetting; for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) { endpoint = &iface_desc->endpoint[i].desc; if (((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) && ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_ISOC)) { /* we find our isoc in endpoint */ u16 tmp = le16_to_cpu(endpoint->wMaxPacketSize); dev->max_pkt_size = (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1); dev->isoc_in_endpointaddr = endpoint->bEndpointAddress; dprintk(1, "Found isoc endpoint 0x%02x, max size = %d\n", dev->isoc_in_endpointaddr, dev->max_pkt_size); } } if (!(dev->isoc_in_endpointaddr)) { pr_info("Could not locate isoc endpoint\n"); return -ENODEV; } init_waitqueue_head(&dev->open); spin_lock_init(&dev->slock); /* init video dma queues */ INIT_LIST_HEAD(&dev->vidq.active); INIT_LIST_HEAD(&dev->vbiq.active); setup_timer(&dev->vid_timeout, au0828_vid_buffer_timeout, (unsigned long)dev); setup_timer(&dev->vbi_timeout, au0828_vbi_buffer_timeout, (unsigned long)dev); dev->width = NTSC_STD_W; dev->height = NTSC_STD_H; dev->field_size = dev->width * dev->height; dev->frame_size = dev->field_size << 1; dev->bytesperline = dev->width << 1; dev->vbi_width = 720; dev->vbi_height = 1; dev->ctrl_ainput = 0; dev->ctrl_freq = 960; dev->std = V4L2_STD_NTSC_M; au0828_s_input(dev, 0); mutex_init(&dev->vb_queue_lock); mutex_init(&dev->vb_vbi_queue_lock); /* Fill the video capture device struct */ dev->vdev = au0828_video_template; dev->vdev.v4l2_dev = &dev->v4l2_dev; dev->vdev.lock = &dev->lock; dev->vdev.queue = &dev->vb_vidq; dev->vdev.queue->lock = &dev->vb_queue_lock; strcpy(dev->vdev.name, "au0828a video"); /* Setup the VBI device */ dev->vbi_dev = au0828_video_template; dev->vbi_dev.v4l2_dev = &dev->v4l2_dev; dev->vbi_dev.lock = &dev->lock; dev->vbi_dev.queue = &dev->vb_vbiq; dev->vbi_dev.queue->lock = &dev->vb_vbi_queue_lock; strcpy(dev->vbi_dev.name, "au0828a vbi"); /* initialize videobuf2 stuff */ retval = au0828_vb2_setup(dev); if (retval != 0) { dprintk(1, "unable to setup videobuf2 queues (error = %d).\n", retval); return -ENODEV; } /* Register the v4l2 device */ video_set_drvdata(&dev->vdev, dev); retval = video_register_device(&dev->vdev, VFL_TYPE_GRABBER, -1); if (retval != 0) { dprintk(1, "unable to register video device (error = %d).\n", retval); ret = -ENODEV; goto err_reg_vdev; } /* Register the vbi device */ video_set_drvdata(&dev->vbi_dev, dev); retval = video_register_device(&dev->vbi_dev, VFL_TYPE_VBI, -1); if (retval != 0) { dprintk(1, "unable to register vbi device (error = %d).\n", retval); ret = -ENODEV; goto err_reg_vbi_dev; } dprintk(1, "%s completed!\n", __func__); return 0; err_reg_vbi_dev: video_unregister_device(&dev->vdev); err_reg_vdev: vb2_queue_release(&dev->vb_vidq); vb2_queue_release(&dev->vb_vbiq); return ret; }