/* * Copyright (c) 2003-2006 Silicon Graphics, Inc. All Rights Reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License * as published by the Free Software Foundation. * * This program is distributed in the hope that it would be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * * You should have received a copy of the GNU General Public * License along with this program; if not, write the Free Software * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. * * For further information regarding this notice, see: * * http://oss.sgi.com/projects/GenInfo/NoticeExplan */ #include #include #include #include #include #include #include #include #include #include #include #include #include #define DRV_NAME "SGIIOC4" /* IOC4 Specific Definitions */ #define IOC4_CMD_OFFSET 0x100 #define IOC4_CTRL_OFFSET 0x120 #define IOC4_DMA_OFFSET 0x140 #define IOC4_INTR_OFFSET 0x0 #define IOC4_TIMING 0x00 #define IOC4_DMA_PTR_L 0x01 #define IOC4_DMA_PTR_H 0x02 #define IOC4_DMA_ADDR_L 0x03 #define IOC4_DMA_ADDR_H 0x04 #define IOC4_BC_DEV 0x05 #define IOC4_BC_MEM 0x06 #define IOC4_DMA_CTRL 0x07 #define IOC4_DMA_END_ADDR 0x08 /* Bits in the IOC4 Control/Status Register */ #define IOC4_S_DMA_START 0x01 #define IOC4_S_DMA_STOP 0x02 #define IOC4_S_DMA_DIR 0x04 #define IOC4_S_DMA_ACTIVE 0x08 #define IOC4_S_DMA_ERROR 0x10 #define IOC4_ATA_MEMERR 0x02 /* Read/Write Directions */ #define IOC4_DMA_WRITE 0x04 #define IOC4_DMA_READ 0x00 /* Interrupt Register Offsets */ #define IOC4_INTR_REG 0x03 #define IOC4_INTR_SET 0x05 #define IOC4_INTR_CLEAR 0x07 #define IOC4_IDE_CACHELINE_SIZE 128 #define IOC4_CMD_CTL_BLK_SIZE 0x20 #define IOC4_SUPPORTED_FIRMWARE_REV 46 typedef struct { u32 timing_reg0; u32 timing_reg1; u32 low_mem_ptr; u32 high_mem_ptr; u32 low_mem_addr; u32 high_mem_addr; u32 dev_byte_count; u32 mem_byte_count; u32 status; } ioc4_dma_regs_t; /* Each Physical Region Descriptor Entry size is 16 bytes (2 * 64 bits) */ /* IOC4 has only 1 IDE channel */ #define IOC4_PRD_BYTES 16 #define IOC4_PRD_ENTRIES (PAGE_SIZE /(4*IOC4_PRD_BYTES)) static void sgiioc4_init_hwif_ports(hw_regs_t * hw, unsigned long data_port, unsigned long ctrl_port, unsigned long irq_port) { unsigned long reg = data_port; int i; /* Registers are word (32 bit) aligned */ for (i = 0; i <= 7; i++) hw->io_ports_array[i] = reg + i * 4; if (ctrl_port) hw->io_ports.ctl_addr = ctrl_port; if (irq_port) hw->io_ports.irq_addr = irq_port; } static void sgiioc4_maskproc(ide_drive_t * drive, int mask) { writeb(ATA_DEVCTL_OBS | (mask ? 2 : 0), (void __iomem *)drive->hwif->io_ports.ctl_addr); } static int sgiioc4_checkirq(ide_hwif_t * hwif) { unsigned long intr_addr = hwif->io_ports.irq_addr + IOC4_INTR_REG * 4; if ((u8)readl((void __iomem *)intr_addr) & 0x03) return 1; return 0; } static u8 sgiioc4_read_status(ide_hwif_t *); static int sgiioc4_clearirq(ide_drive_t * drive) { u32 intr_reg; ide_hwif_t *hwif = HWIF(drive); struct ide_io_ports *io_ports = &hwif->io_ports; unsigned long other_ir = io_ports->irq_addr + (IOC4_INTR_REG << 2); /* Code to check for PCI error conditions */ intr_reg = readl((void __iomem *)other_ir); if (intr_reg & 0x03) { /* Valid IOC4-IDE interrupt */ /* * Using sgiioc4_read_status to read the Status register has a * side effect of clearing the interrupt. The first read should * clear it if it is set. The second read should return * a "clear" status if it got cleared. If not, then spin * for a bit trying to clear it. */ u8 stat = sgiioc4_read_status(hwif); int count = 0; stat = sgiioc4_read_status(hwif); while ((stat & 0x80) && (count++ < 100)) { udelay(1); stat = sgiioc4_read_status(hwif); } if (intr_reg & 0x02) { struct pci_dev *dev = to_pci_dev(hwif->dev); /* Error when transferring DMA data on PCI bus */ u32 pci_err_addr_low, pci_err_addr_high, pci_stat_cmd_reg; pci_err_addr_low = readl((void __iomem *)io_ports->irq_addr); pci_err_addr_high = readl((void __iomem *)(io_ports->irq_addr + 4)); pci_read_config_dword(dev, PCI_COMMAND, &pci_stat_cmd_reg); printk(KERN_ERR "%s(%s) : PCI Bus Error when doing DMA:" " status-cmd reg is 0x%x\n", __func__, drive->name, pci_stat_cmd_reg); printk(KERN_ERR "%s(%s) : PCI Error Address is 0x%x%x\n", __func__, drive->name, pci_err_addr_high, pci_err_addr_low); /* Clear the PCI Error indicator */ pci_write_config_dword(dev, PCI_COMMAND, 0x00000146); } /* Clear the Interrupt, Error bits on the IOC4 */ writel(0x03, (void __iomem *)other_ir); intr_reg = readl((void __iomem *)other_ir); } return intr_reg & 3; } static void sgiioc4_dma_start(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); unsigned long ioc4_dma_addr = hwif->dma_base + IOC4_DMA_CTRL * 4; unsigned int reg = readl((void __iomem *)ioc4_dma_addr); unsigned int temp_reg = reg | IOC4_S_DMA_START; writel(temp_reg, (void __iomem *)ioc4_dma_addr); } static u32 sgiioc4_ide_dma_stop(ide_hwif_t *hwif, u64 dma_base) { unsigned long ioc4_dma_addr = dma_base + IOC4_DMA_CTRL * 4; u32 ioc4_dma; int count; count = 0; ioc4_dma = readl((void __iomem *)ioc4_dma_addr); while ((ioc4_dma & IOC4_S_DMA_STOP) && (count++ < 200)) { udelay(1); ioc4_dma = readl((void __iomem *)ioc4_dma_addr); } return ioc4_dma; } /* Stops the IOC4 DMA Engine */ static int sgiioc4_dma_end(ide_drive_t *drive) { u32 ioc4_dma, bc_dev, bc_mem, num, valid = 0, cnt = 0; ide_hwif_t *hwif = HWIF(drive); unsigned long dma_base = hwif->dma_base; int dma_stat = 0; unsigned long *ending_dma = ide_get_hwifdata(hwif); writel(IOC4_S_DMA_STOP, (void __iomem *)(dma_base + IOC4_DMA_CTRL * 4)); ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base); if (ioc4_dma & IOC4_S_DMA_STOP) { printk(KERN_ERR "%s(%s): IOC4 DMA STOP bit is still 1 :" "ioc4_dma_reg 0x%x\n", __func__, drive->name, ioc4_dma); dma_stat = 1; } /* * The IOC4 will DMA 1's to the ending dma area to indicate that * previous data DMA is complete. This is necessary because of relaxed * ordering between register reads and DMA writes on the Altix. */ while ((cnt++ < 200) && (!valid)) { for (num = 0; num < 16; num++) { if (ending_dma[num]) { valid = 1; break; } } udelay(1); } if (!valid) { printk(KERN_ERR "%s(%s) : DMA incomplete\n", __func__, drive->name); dma_stat = 1; } bc_dev = readl((void __iomem *)(dma_base + IOC4_BC_DEV * 4)); bc_mem = readl((void __iomem *)(dma_base + IOC4_BC_MEM * 4)); if ((bc_dev & 0x01FF) || (bc_mem & 0x1FF)) { if (bc_dev > bc_mem + 8) { printk(KERN_ERR "%s(%s): WARNING!! byte_count_dev %d " "!= byte_count_mem %d\n", __func__, drive->name, bc_dev, bc_mem); } } drive->waiting_for_dma = 0; ide_destroy_dmatable(drive); return dma_stat; } static void sgiioc4_set_dma_mode(ide_drive_t *drive, const u8 speed) { } /* returns 1 if dma irq issued, 0 otherwise */ static int sgiioc4_dma_test_irq(ide_drive_t *drive) { return sgiioc4_checkirq(HWIF(drive)); } static void sgiioc4_dma_host_set(ide_drive_t *drive, int on) { if (!on) sgiioc4_clearirq(drive); } static void sgiioc4_resetproc(ide_drive_t * drive) { sgiioc4_dma_end(drive); sgiioc4_clearirq(drive); } static void sgiioc4_dma_lost_irq(ide_drive_t * drive) { sgiioc4_resetproc(drive); ide_dma_lost_irq(drive); } static u8 sgiioc4_read_status(ide_hwif_t *hwif) { unsigned long port = hwif->io_ports.status_addr; u8 reg = (u8) readb((void __iomem *) port); if ((port & 0xFFF) == 0x11C) { /* Status register of IOC4 */ if (reg & 0x51) { /* Not busy...check for interrupt */ unsigned long other_ir = port - 0x110; unsigned int intr_reg = (u32) readl((void __iomem *) other_ir); /* Clear the Interrupt, Error bits on the IOC4 */ if (intr_reg & 0x03) { writel(0x03, (void __iomem *) other_ir); intr_reg = (u32) readl((void __iomem *) other_ir); } } } return reg; } /* Creates a dma map for the scatter-gather list entries */ static int __devinit ide_dma_sgiioc4(ide_hwif_t *hwif, const struct ide_port_info *d) { struct pci_dev *dev = to_pci_dev(hwif->dev); unsigned long dma_base = pci_resource_start(dev, 0) + IOC4_DMA_OFFSET; void __iomem *virt_dma_base; int num_ports = sizeof (ioc4_dma_regs_t); void *pad; if (dma_base == 0) return -1; printk(KERN_INFO "%s: BM-DMA at 0x%04lx-0x%04lx\n", hwif->name, dma_base, dma_base + num_ports - 1); if (!request_mem_region(dma_base, num_ports, hwif->name)) { printk(KERN_ERR "%s(%s) -- ERROR, Addresses 0x%p to 0x%p " "ALREADY in use\n", __func__, hwif->name, (void *) dma_base, (void *) dma_base + num_ports - 1); return -1; } virt_dma_base = ioremap(dma_base, num_ports); if (virt_dma_base == NULL) { printk(KERN_ERR "%s(%s) -- ERROR, Unable to map addresses 0x%lx to 0x%lx\n", __func__, hwif->name, dma_base, dma_base + num_ports - 1); goto dma_remap_failure; } hwif->dma_base = (unsigned long) virt_dma_base; hwif->dmatable_cpu = pci_alloc_consistent(dev, IOC4_PRD_ENTRIES * IOC4_PRD_BYTES, &hwif->dmatable_dma); if (!hwif->dmatable_cpu) goto dma_pci_alloc_failure; hwif->sg_max_nents = IOC4_PRD_ENTRIES; pad = pci_alloc_consistent(dev, IOC4_IDE_CACHELINE_SIZE, (dma_addr_t *)&hwif->extra_base); if (pad) { ide_set_hwifdata(hwif, pad); return 0; } pci_free_consistent(dev, IOC4_PRD_ENTRIES * IOC4_PRD_BYTES, hwif->dmatable_cpu, hwif->dmatable_dma); printk(KERN_INFO "%s() -- Error! Unable to allocate DMA Maps for drive %s\n", __func__, hwif->name); printk(KERN_INFO "Changing from DMA to PIO mode for Drive %s\n", hwif->name); dma_pci_alloc_failure: iounmap(virt_dma_base); dma_remap_failure: release_mem_region(dma_base, num_ports); return -1; } /* Initializes the IOC4 DMA Engine */ static void sgiioc4_configure_for_dma(int dma_direction, ide_drive_t * drive) { u32 ioc4_dma; ide_hwif_t *hwif = HWIF(drive); unsigned long dma_base = hwif->dma_base; unsigned long ioc4_dma_addr = dma_base + IOC4_DMA_CTRL * 4; u32 dma_addr, ending_dma_addr; ioc4_dma = readl((void __iomem *)ioc4_dma_addr); if (ioc4_dma & IOC4_S_DMA_ACTIVE) { printk(KERN_WARNING "%s(%s):Warning!! DMA from previous transfer was still active\n", __func__, drive->name); writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr); ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base); if (ioc4_dma & IOC4_S_DMA_STOP) printk(KERN_ERR "%s(%s) : IOC4 Dma STOP bit is still 1\n", __func__, drive->name); } ioc4_dma = readl((void __iomem *)ioc4_dma_addr); if (ioc4_dma & IOC4_S_DMA_ERROR) { printk(KERN_WARNING "%s(%s) : Warning!! - DMA Error during Previous" " transfer | status 0x%x\n", __func__, drive->name, ioc4_dma); writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr); ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base); if (ioc4_dma & IOC4_S_DMA_STOP) printk(KERN_ERR "%s(%s) : IOC4 DMA STOP bit is still 1\n", __func__, drive->name); } /* Address of the Scatter Gather List */ dma_addr = cpu_to_le32(hwif->dmatable_dma); writel(dma_addr, (void __iomem *)(dma_base + IOC4_DMA_PTR_L * 4)); /* Address of the Ending DMA */ memset(ide_get_hwifdata(hwif), 0, IOC4_IDE_CACHELINE_SIZE); ending_dma_addr = cpu_to_le32(hwif->extra_base); writel(ending_dma_addr, (void __iomem *)(dma_base + IOC4_DMA_END_ADDR * 4)); writel(dma_direction, (void __iomem *)ioc4_dma_addr); drive->waiting_for_dma = 1; } /* IOC4 Scatter Gather list Format */ /* 128 Bit entries to support 64 bit addresses in the future */ /* The Scatter Gather list Entry should be in the BIG-ENDIAN Format */ /* --------------------------------------------------------------------- */ /* | Upper 32 bits - Zero | Lower 32 bits- address | */ /* --------------------------------------------------------------------- */ /* | Upper 32 bits - Zero |EOL| 15 unused | 16 Bit Length| */ /* --------------------------------------------------------------------- */ /* Creates the scatter gather list, DMA Table */ static unsigned int sgiioc4_build_dma_table(ide_drive_t * drive, struct request *rq, int ddir) { ide_hwif_t *hwif = HWIF(drive); unsigned int *table = hwif->dmatable_cpu; unsigned int count = 0, i = 1; struct scatterlist *sg; hwif->sg_nents = i = ide_build_sglist(drive, rq); if (!i) return 0; /* sglist of length Zero */ sg = hwif->sg_table; while (i && sg_dma_len(sg)) { dma_addr_t cur_addr; int cur_len; cur_addr = sg_dma_address(sg); cur_len = sg_dma_len(sg); while (cur_len) { if (count++ >= IOC4_PRD_ENTRIES) { printk(KERN_WARNING "%s: DMA table too small\n", drive->name); goto use_pio_instead; } else { u32 bcount = 0x10000 - (cur_addr & 0xffff); if (bcount > cur_len) bcount = cur_len; /* put the addr, length in * the IOC4 dma-table format */ *table = 0x0; table++; *table = cpu_to_be32(cur_addr); table++; *table = 0x0; table++; *table = cpu_to_be32(bcount); table++; cur_addr += bcount; cur_len -= bcount; } } sg = sg_next(sg); i--; } if (count) { table--; *table |= cpu_to_be32(0x80000000); return count; } use_pio_instead: ide_destroy_dmatable(drive); return 0; /* revert to PIO for this request */ } static int sgiioc4_dma_setup(ide_drive_t *drive) { struct request *rq = HWGROUP(drive)->rq; unsigned int count = 0; int ddir; if (rq_data_dir(rq)) ddir = PCI_DMA_TODEVICE; else ddir = PCI_DMA_FROMDEVICE; if (!(count = sgiioc4_build_dma_table(drive, rq, ddir))) { /* try PIO instead of DMA */ ide_map_sg(drive, rq); return 1; } if (rq_data_dir(rq)) /* Writes TO the IOC4 FROM Main Memory */ ddir = IOC4_DMA_READ; else /* Writes FROM the IOC4 TO Main Memory */ ddir = IOC4_DMA_WRITE; sgiioc4_configure_for_dma(ddir, drive); return 0; } static const struct ide_port_ops sgiioc4_port_ops = { .set_dma_mode = sgiioc4_set_dma_mode, /* reset DMA engine, clear IRQs */ .resetproc = sgiioc4_resetproc, /* mask on/off NIEN register */ .maskproc = sgiioc4_maskproc, }; static const struct ide_dma_ops sgiioc4_dma_ops = { .dma_host_set = sgiioc4_dma_host_set, .dma_setup = sgiioc4_dma_setup, .dma_start = sgiioc4_dma_start, .dma_end = sgiioc4_dma_end, .dma_test_irq = sgiioc4_dma_test_irq, .dma_lost_irq = sgiioc4_dma_lost_irq, .dma_timeout = ide_dma_timeout, }; static const struct ide_port_info sgiioc4_port_info __devinitdata = { .name = DRV_NAME, .chipset = ide_pci, .init_dma = ide_dma_sgiioc4, .port_ops = &sgiioc4_port_ops, .dma_ops = &sgiioc4_dma_ops, .host_flags = IDE_HFLAG_MMIO, .mwdma_mask = ATA_MWDMA2_ONLY, }; static int __devinit sgiioc4_ide_setup_pci_device(struct pci_dev *dev) { unsigned long cmd_base, irqport; unsigned long bar0, cmd_phys_base, ctl; void __iomem *virt_base; ide_hwif_t *hwif; hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL }; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; struct ide_port_info d = sgiioc4_port_info; /* Get the CmdBlk and CtrlBlk Base Registers */ bar0 = pci_resource_start(dev, 0); virt_base = ioremap(bar0, pci_resource_len(dev, 0)); if (virt_base == NULL) { printk(KERN_ERR "%s: Unable to remap BAR 0 address: 0x%lx\n", DRV_NAME, bar0); return -ENOMEM; } cmd_base = (unsigned long) virt_base + IOC4_CMD_OFFSET; ctl = (unsigned long) virt_base + IOC4_CTRL_OFFSET; irqport = (unsigned long) virt_base + IOC4_INTR_OFFSET; cmd_phys_base = bar0 + IOC4_CMD_OFFSET; if (!request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE, DRV_NAME)) { printk(KERN_ERR "%s : %s -- ERROR, Addresses " "0x%p to 0x%p ALREADY in use\n", __func__, DRV_NAME, (void *) cmd_phys_base, (void *) cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE); return -ENOMEM; } /* Initialize the IO registers */ memset(&hw, 0, sizeof(hw)); sgiioc4_init_hwif_ports(&hw, cmd_base, ctl, irqport); hw.irq = dev->irq; hw.chipset = ide_pci; hw.dev = &dev->dev; hwif = ide_find_port_slot(&d); if (hwif == NULL) goto err; /* Initializing chipset IRQ Registers */ writel(0x03, (void __iomem *)(irqport + IOC4_INTR_SET * 4)); hwif->read_status = sgiioc4_read_status; idx[0] = hwif->index; if (ide_device_add(idx, &d, hws)) return -EIO; return 0; err: release_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE); iounmap(virt_base); return -ENOMEM; } static unsigned int __devinit pci_init_sgiioc4(struct pci_dev *dev) { int ret; printk(KERN_INFO "%s: IDE controller at PCI slot %s, revision %d\n", DRV_NAME, pci_name(dev), dev->revision); if (dev->revision < IOC4_SUPPORTED_FIRMWARE_REV) { printk(KERN_ERR "Skipping %s IDE controller in slot %s: " "firmware is obsolete - please upgrade to " "revision46 or higher\n", DRV_NAME, pci_name(dev)); ret = -EAGAIN; goto out; } ret = sgiioc4_ide_setup_pci_device(dev); out: return ret; } int ioc4_ide_attach_one(struct ioc4_driver_data *idd) { /* PCI-RT does not bring out IDE connection. * Do not attach to this particular IOC4. */ if (idd->idd_variant == IOC4_VARIANT_PCI_RT) return 0; return pci_init_sgiioc4(idd->idd_pdev); } static struct ioc4_submodule ioc4_ide_submodule = { .is_name = "IOC4_ide", .is_owner = THIS_MODULE, .is_probe = ioc4_ide_attach_one, /* .is_remove = ioc4_ide_remove_one, */ }; static int __init ioc4_ide_init(void) { return ioc4_register_submodule(&ioc4_ide_submodule); } late_initcall(ioc4_ide_init); /* Call only after IDE init is done */ MODULE_AUTHOR("Aniket Malatpure/Jeremy Higdon"); MODULE_DESCRIPTION("IDE PCI driver module for SGI IOC4 Base-IO Card"); MODULE_LICENSE("GPL");