/* * PCI glue for ISHTP provider device (ISH) driver * * Copyright (c) 2014-2016, Intel Corporation. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, * version 2, as published by the Free Software Foundation. * * This program is distributed in the hope it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. */ #include #include #include #include #include #include #include #include #include #include #include #define CREATE_TRACE_POINTS #include #include "ishtp-dev.h" #include "hw-ish.h" static const struct pci_device_id ish_pci_tbl[] = { {PCI_DEVICE(PCI_VENDOR_ID_INTEL, CHV_DEVICE_ID)}, {PCI_DEVICE(PCI_VENDOR_ID_INTEL, BXT_Ax_DEVICE_ID)}, {PCI_DEVICE(PCI_VENDOR_ID_INTEL, BXT_Bx_DEVICE_ID)}, {PCI_DEVICE(PCI_VENDOR_ID_INTEL, APL_Ax_DEVICE_ID)}, {PCI_DEVICE(PCI_VENDOR_ID_INTEL, SPT_Ax_DEVICE_ID)}, {PCI_DEVICE(PCI_VENDOR_ID_INTEL, CNL_Ax_DEVICE_ID)}, {PCI_DEVICE(PCI_VENDOR_ID_INTEL, GLK_Ax_DEVICE_ID)}, {PCI_DEVICE(PCI_VENDOR_ID_INTEL, CNL_H_DEVICE_ID)}, {0, } }; MODULE_DEVICE_TABLE(pci, ish_pci_tbl); /** * ish_event_tracer() - Callback function to dump trace messages * @dev: ishtp device * @format: printf style format * * Callback to direct log messages to Linux trace buffers */ static __printf(2, 3) void ish_event_tracer(struct ishtp_device *dev, const char *format, ...) { if (trace_ishtp_dump_enabled()) { va_list args; char tmp_buf[100]; va_start(args, format); vsnprintf(tmp_buf, sizeof(tmp_buf), format, args); va_end(args); trace_ishtp_dump(tmp_buf); } } /** * ish_init() - Init function * @dev: ishtp device * * This function initialize wait queues for suspend/resume and call * calls hadware initialization function. This will initiate * startup sequence * * Return: 0 for success or error code for failure */ static int ish_init(struct ishtp_device *dev) { int ret; /* Set the state of ISH HW to start */ ret = ish_hw_start(dev); if (ret) { dev_err(dev->devc, "ISH: hw start failed.\n"); return ret; } /* Start the inter process communication to ISH processor */ ret = ishtp_start(dev); if (ret) { dev_err(dev->devc, "ISHTP: Protocol init failed.\n"); return ret; } return 0; } /** * ish_probe() - PCI driver probe callback * @pdev: pci device * @ent: pci device id * * Initialize PCI function, setup interrupt and call for ISH initialization * * Return: 0 for success or error code for failure */ static int ish_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { struct ishtp_device *dev; struct ish_hw *hw; int ret; /* enable pci dev */ ret = pci_enable_device(pdev); if (ret) { dev_err(&pdev->dev, "ISH: Failed to enable PCI device\n"); return ret; } /* set PCI host mastering */ pci_set_master(pdev); /* pci request regions for ISH driver */ ret = pci_request_regions(pdev, KBUILD_MODNAME); if (ret) { dev_err(&pdev->dev, "ISH: Failed to get PCI regions\n"); goto disable_device; } /* allocates and initializes the ISH dev structure */ dev = ish_dev_init(pdev); if (!dev) { ret = -ENOMEM; goto release_regions; } hw = to_ish_hw(dev); dev->print_log = ish_event_tracer; /* mapping IO device memory */ hw->mem_addr = pci_iomap(pdev, 0, 0); if (!hw->mem_addr) { dev_err(&pdev->dev, "ISH: mapping I/O range failure\n"); ret = -ENOMEM; goto free_device; } dev->pdev = pdev; pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3; /* request and enable interrupt */ ret = request_irq(pdev->irq, ish_irq_handler, IRQF_SHARED, KBUILD_MODNAME, dev); if (ret) { dev_err(&pdev->dev, "ISH: request IRQ failure (%d)\n", pdev->irq); goto free_device; } dev_set_drvdata(dev->devc, dev); init_waitqueue_head(&dev->suspend_wait); init_waitqueue_head(&dev->resume_wait); ret = ish_init(dev); if (ret) goto free_irq; return 0; free_irq: free_irq(pdev->irq, dev); free_device: pci_iounmap(pdev, hw->mem_addr); kfree(dev); release_regions: pci_release_regions(pdev); disable_device: pci_clear_master(pdev); pci_disable_device(pdev); dev_err(&pdev->dev, "ISH: PCI driver initialization failed.\n"); return ret; } /** * ish_remove() - PCI driver remove callback * @pdev: pci device * * This function does cleanup of ISH on pci remove callback */ static void ish_remove(struct pci_dev *pdev) { struct ishtp_device *ishtp_dev = pci_get_drvdata(pdev); struct ish_hw *hw = to_ish_hw(ishtp_dev); ishtp_bus_remove_all_clients(ishtp_dev, false); ish_device_disable(ishtp_dev); free_irq(pdev->irq, ishtp_dev); pci_iounmap(pdev, hw->mem_addr); pci_release_regions(pdev); pci_clear_master(pdev); pci_disable_device(pdev); kfree(ishtp_dev); } #ifdef CONFIG_PM static struct device *ish_resume_device; /* 50ms to get resume response */ #define WAIT_FOR_RESUME_ACK_MS 50 /** * ish_resume_handler() - Work function to complete resume * @work: work struct * * The resume work function to complete resume function asynchronously. * There are two resume paths, one where ISH is not powered off, * in that case a simple resume message is enough, others we need * a reset sequence. */ static void ish_resume_handler(struct work_struct *work) { struct pci_dev *pdev = to_pci_dev(ish_resume_device); struct ishtp_device *dev = pci_get_drvdata(pdev); uint32_t fwsts; int ret; /* Get ISH FW status */ fwsts = IPC_GET_ISH_FWSTS(dev->ops->get_fw_status(dev)); /* * If currently, in ISH FW, sensor app is loaded or beyond that, * it means ISH isn't powered off, in this case, send a resume message. */ if (fwsts >= FWSTS_SENSOR_APP_LOADED) { ishtp_send_resume(dev); /* Waiting to get resume response */ if (dev->resume_flag) ret = wait_event_interruptible_timeout(dev->resume_wait, !dev->resume_flag, msecs_to_jiffies(WAIT_FOR_RESUME_ACK_MS)); } /* * If in ISH FW, sensor app isn't loaded yet, or no resume response. * That means this platform is not S0ix compatible, or something is * wrong with ISH FW. So on resume, full reboot of ISH processor will * happen, so need to go through init sequence again. */ if (dev->resume_flag) ish_init(dev); } /** * ish_suspend() - ISH suspend callback * @device: device pointer * * ISH suspend callback * * Return: 0 to the pm core */ static int ish_suspend(struct device *device) { struct pci_dev *pdev = to_pci_dev(device); struct ishtp_device *dev = pci_get_drvdata(pdev); enable_irq_wake(pdev->irq); /* * If previous suspend hasn't been asnwered then ISH is likely dead, * don't attempt nested notification */ if (dev->suspend_flag) return 0; dev->resume_flag = 0; dev->suspend_flag = 1; ishtp_send_suspend(dev); /* 25 ms should be enough for live ISH to flush all IPC buf */ if (dev->suspend_flag) wait_event_interruptible_timeout(dev->suspend_wait, !dev->suspend_flag, msecs_to_jiffies(25)); return 0; } static DECLARE_WORK(resume_work, ish_resume_handler); /** * ish_resume() - ISH resume callback * @device: device pointer * * ISH resume callback * * Return: 0 to the pm core */ static int ish_resume(struct device *device) { struct pci_dev *pdev = to_pci_dev(device); struct ishtp_device *dev = pci_get_drvdata(pdev); ish_resume_device = device; dev->resume_flag = 1; disable_irq_wake(pdev->irq); schedule_work(&resume_work); return 0; } static const struct dev_pm_ops ish_pm_ops = { .suspend = ish_suspend, .resume = ish_resume, }; #define ISHTP_ISH_PM_OPS (&ish_pm_ops) #else #define ISHTP_ISH_PM_OPS NULL #endif /* CONFIG_PM */ static struct pci_driver ish_driver = { .name = KBUILD_MODNAME, .id_table = ish_pci_tbl, .probe = ish_probe, .remove = ish_remove, .driver.pm = ISHTP_ISH_PM_OPS, }; module_pci_driver(ish_driver); /* Original author */ MODULE_AUTHOR("Daniel Drubin "); /* Adoption to upstream Linux kernel */ MODULE_AUTHOR("Srinivas Pandruvada "); MODULE_DESCRIPTION("Intel(R) Integrated Sensor Hub PCI Device Driver"); MODULE_LICENSE("GPL");