// SPDX-License-Identifier: GPL-2.0 // // Ingenic JZ47xx IPU driver // // Copyright (C) 2020, Paul Cercueil // Copyright (C) 2020, Daniel Silsby #include "ingenic-drm.h" #include "ingenic-ipu.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include struct ingenic_ipu; struct soc_info { const u32 *formats; size_t num_formats; bool has_bicubic; bool manual_restart; void (*set_coefs)(struct ingenic_ipu *ipu, unsigned int reg, unsigned int sharpness, bool downscale, unsigned int weight, unsigned int offset); }; struct ingenic_ipu { struct drm_plane plane; struct drm_device *drm; struct device *dev, *master; struct regmap *map; struct clk *clk; const struct soc_info *soc_info; bool clk_enabled; unsigned int num_w, num_h, denom_w, denom_h; dma_addr_t addr_y, addr_u, addr_v; struct drm_property *sharpness_prop; unsigned int sharpness; }; /* Signed 15.16 fixed-point math (for bicubic scaling coefficients) */ #define I2F(i) ((s32)(i) * 65536) #define F2I(f) ((f) / 65536) #define FMUL(fa, fb) ((s32)(((s64)(fa) * (s64)(fb)) / 65536)) #define SHARPNESS_INCR (I2F(-1) / 8) static inline struct ingenic_ipu *plane_to_ingenic_ipu(struct drm_plane *plane) { return container_of(plane, struct ingenic_ipu, plane); } /* * Apply conventional cubic convolution kernel. Both parameters * and return value are 15.16 signed fixed-point. * * @f_a: Sharpness factor, typically in range [-4.0, -0.25]. * A larger magnitude increases perceived sharpness, but going past * -2.0 might cause ringing artifacts to outweigh any improvement. * Nice values on a 320x240 LCD are between -0.75 and -2.0. * * @f_x: Absolute distance in pixels from 'pixel 0' sample position * along horizontal (or vertical) source axis. Range is [0, +2.0]. * * returns: Weight of this pixel within 4-pixel sample group. Range is * [-2.0, +2.0]. For moderate (i.e. > -3.0) sharpness factors, * range is within [-1.0, +1.0]. */ static inline s32 cubic_conv(s32 f_a, s32 f_x) { const s32 f_1 = I2F(1); const s32 f_2 = I2F(2); const s32 f_3 = I2F(3); const s32 f_4 = I2F(4); const s32 f_x2 = FMUL(f_x, f_x); const s32 f_x3 = FMUL(f_x, f_x2); if (f_x <= f_1) return FMUL((f_a + f_2), f_x3) - FMUL((f_a + f_3), f_x2) + f_1; else if (f_x <= f_2) return FMUL(f_a, (f_x3 - 5 * f_x2 + 8 * f_x - f_4)); else return 0; } /* * On entry, "weight" is a coefficient suitable for bilinear mode, * which is converted to a set of four suitable for bicubic mode. * * "weight 512" means all of pixel 0; * "weight 256" means half of pixel 0 and half of pixel 1; * "weight 0" means all of pixel 1; * * "offset" is increment to next source pixel sample location. */ static void jz4760_set_coefs(struct ingenic_ipu *ipu, unsigned int reg, unsigned int sharpness, bool downscale, unsigned int weight, unsigned int offset) { u32 val; s32 w0, w1, w2, w3; /* Pixel weights at X (or Y) offsets -1,0,1,2 */ weight = clamp_val(weight, 0, 512); if (sharpness < 2) { /* * When sharpness setting is 0, emulate nearest-neighbor. * When sharpness setting is 1, emulate bilinear. */ if (sharpness == 0) weight = weight >= 256 ? 512 : 0; w0 = 0; w1 = weight; w2 = 512 - weight; w3 = 0; } else { const s32 f_a = SHARPNESS_INCR * sharpness; const s32 f_h = I2F(1) / 2; /* Round up 0.5 */ /* * Note that always rounding towards +infinity here is intended. * The resulting coefficients match a round-to-nearest-int * double floating-point implementation. */ weight = 512 - weight; w0 = F2I(f_h + 512 * cubic_conv(f_a, I2F(512 + weight) / 512)); w1 = F2I(f_h + 512 * cubic_conv(f_a, I2F(0 + weight) / 512)); w2 = F2I(f_h + 512 * cubic_conv(f_a, I2F(512 - weight) / 512)); w3 = F2I(f_h + 512 * cubic_conv(f_a, I2F(1024 - weight) / 512)); w0 = clamp_val(w0, -1024, 1023); w1 = clamp_val(w1, -1024, 1023); w2 = clamp_val(w2, -1024, 1023); w3 = clamp_val(w3, -1024, 1023); } val = ((w1 & JZ4760_IPU_RSZ_COEF_MASK) << JZ4760_IPU_RSZ_COEF31_LSB) | ((w0 & JZ4760_IPU_RSZ_COEF_MASK) << JZ4760_IPU_RSZ_COEF20_LSB); regmap_write(ipu->map, reg, val); val = ((w3 & JZ4760_IPU_RSZ_COEF_MASK) << JZ4760_IPU_RSZ_COEF31_LSB) | ((w2 & JZ4760_IPU_RSZ_COEF_MASK) << JZ4760_IPU_RSZ_COEF20_LSB) | ((offset & JZ4760_IPU_RSZ_OFFSET_MASK) << JZ4760_IPU_RSZ_OFFSET_LSB); regmap_write(ipu->map, reg, val); } static void jz4725b_set_coefs(struct ingenic_ipu *ipu, unsigned int reg, unsigned int sharpness, bool downscale, unsigned int weight, unsigned int offset) { u32 val = JZ4725B_IPU_RSZ_LUT_OUT_EN; unsigned int i; weight = clamp_val(weight, 0, 512); if (sharpness == 0) weight = weight >= 256 ? 512 : 0; val |= (weight & JZ4725B_IPU_RSZ_LUT_COEF_MASK) << JZ4725B_IPU_RSZ_LUT_COEF_LSB; if (downscale || !!offset) val |= JZ4725B_IPU_RSZ_LUT_IN_EN; regmap_write(ipu->map, reg, val); if (downscale) { for (i = 1; i < offset; i++) regmap_write(ipu->map, reg, JZ4725B_IPU_RSZ_LUT_IN_EN); } } static void ingenic_ipu_set_downscale_coefs(struct ingenic_ipu *ipu, unsigned int reg, unsigned int num, unsigned int denom) { unsigned int i, offset, weight, weight_num = denom; for (i = 0; i < num; i++) { weight_num = num + (weight_num - num) % (num * 2); weight = 512 - 512 * (weight_num - num) / (num * 2); weight_num += denom * 2; offset = (weight_num - num) / (num * 2); ipu->soc_info->set_coefs(ipu, reg, ipu->sharpness, true, weight, offset); } } static void ingenic_ipu_set_integer_upscale_coefs(struct ingenic_ipu *ipu, unsigned int reg, unsigned int num) { /* * Force nearest-neighbor scaling and use simple math when upscaling * by an integer ratio. It looks better, and fixes a few problem cases. */ unsigned int i; for (i = 0; i < num; i++) ipu->soc_info->set_coefs(ipu, reg, 0, false, 512, i == num - 1); } static void ingenic_ipu_set_upscale_coefs(struct ingenic_ipu *ipu, unsigned int reg, unsigned int num, unsigned int denom) { unsigned int i, offset, weight, weight_num = 0; for (i = 0; i < num; i++) { weight = 512 - 512 * weight_num / num; weight_num += denom; offset = weight_num >= num; if (offset) weight_num -= num; ipu->soc_info->set_coefs(ipu, reg, ipu->sharpness, false, weight, offset); } } static void ingenic_ipu_set_coefs(struct ingenic_ipu *ipu, unsigned int reg, unsigned int num, unsigned int denom) { /* Begin programming the LUT */ regmap_write(ipu->map, reg, -1); if (denom > num) ingenic_ipu_set_downscale_coefs(ipu, reg, num, denom); else if (denom == 1) ingenic_ipu_set_integer_upscale_coefs(ipu, reg, num); else ingenic_ipu_set_upscale_coefs(ipu, reg, num, denom); } static int reduce_fraction(unsigned int *num, unsigned int *denom) { unsigned long d = gcd(*num, *denom); /* The scaling table has only 31 entries */ if (*num > 31 * d) return -EINVAL; *num /= d; *denom /= d; return 0; } static inline bool osd_changed(struct drm_plane_state *state, struct drm_plane_state *oldstate) { return state->src_x != oldstate->src_x || state->src_y != oldstate->src_y || state->src_w != oldstate->src_w || state->src_h != oldstate->src_h || state->crtc_x != oldstate->crtc_x || state->crtc_y != oldstate->crtc_y || state->crtc_w != oldstate->crtc_w || state->crtc_h != oldstate->crtc_h; } static void ingenic_ipu_plane_atomic_update(struct drm_plane *plane, struct drm_atomic_state *state) { struct ingenic_ipu *ipu = plane_to_ingenic_ipu(plane); struct drm_plane_state *newstate = drm_atomic_get_new_plane_state(state, plane); const struct drm_format_info *finfo; u32 ctrl, stride = 0, coef_index = 0, format = 0; bool needs_modeset, upscaling_w, upscaling_h; int err; if (!newstate || !newstate->fb) return; finfo = drm_format_info(newstate->fb->format->format); if (!ipu->clk_enabled) { err = clk_enable(ipu->clk); if (err) { dev_err(ipu->dev, "Unable to enable clock: %d\n", err); return; } ipu->clk_enabled = true; } /* Reset all the registers if needed */ needs_modeset = drm_atomic_crtc_needs_modeset(newstate->crtc->state); if (needs_modeset) { regmap_set_bits(ipu->map, JZ_REG_IPU_CTRL, JZ_IPU_CTRL_RST); /* Enable the chip */ regmap_set_bits(ipu->map, JZ_REG_IPU_CTRL, JZ_IPU_CTRL_CHIP_EN | JZ_IPU_CTRL_LCDC_SEL); } /* New addresses will be committed in vblank handler... */ ipu->addr_y = drm_fb_cma_get_gem_addr(newstate->fb, newstate, 0); if (finfo->num_planes > 1) ipu->addr_u = drm_fb_cma_get_gem_addr(newstate->fb, newstate, 1); if (finfo->num_planes > 2) ipu->addr_v = drm_fb_cma_get_gem_addr(newstate->fb, newstate, 2); if (!needs_modeset) return; /* Or right here if we're doing a full modeset. */ regmap_write(ipu->map, JZ_REG_IPU_Y_ADDR, ipu->addr_y); regmap_write(ipu->map, JZ_REG_IPU_U_ADDR, ipu->addr_u); regmap_write(ipu->map, JZ_REG_IPU_V_ADDR, ipu->addr_v); if (finfo->num_planes == 1) regmap_set_bits(ipu->map, JZ_REG_IPU_CTRL, JZ_IPU_CTRL_SPKG_SEL); ingenic_drm_plane_config(ipu->master, plane, DRM_FORMAT_XRGB8888); /* Set the input height/width/strides */ if (finfo->num_planes > 2) stride = ((newstate->src_w >> 16) * finfo->cpp[2] / finfo->hsub) << JZ_IPU_UV_STRIDE_V_LSB; if (finfo->num_planes > 1) stride |= ((newstate->src_w >> 16) * finfo->cpp[1] / finfo->hsub) << JZ_IPU_UV_STRIDE_U_LSB; regmap_write(ipu->map, JZ_REG_IPU_UV_STRIDE, stride); stride = ((newstate->src_w >> 16) * finfo->cpp[0]) << JZ_IPU_Y_STRIDE_Y_LSB; regmap_write(ipu->map, JZ_REG_IPU_Y_STRIDE, stride); regmap_write(ipu->map, JZ_REG_IPU_IN_GS, (stride << JZ_IPU_IN_GS_W_LSB) | ((newstate->src_h >> 16) << JZ_IPU_IN_GS_H_LSB)); switch (finfo->format) { case DRM_FORMAT_XRGB1555: format = JZ_IPU_D_FMT_IN_FMT_RGB555 | JZ_IPU_D_FMT_RGB_OUT_OFT_RGB; break; case DRM_FORMAT_XBGR1555: format = JZ_IPU_D_FMT_IN_FMT_RGB555 | JZ_IPU_D_FMT_RGB_OUT_OFT_BGR; break; case DRM_FORMAT_RGB565: format = JZ_IPU_D_FMT_IN_FMT_RGB565 | JZ_IPU_D_FMT_RGB_OUT_OFT_RGB; break; case DRM_FORMAT_BGR565: format = JZ_IPU_D_FMT_IN_FMT_RGB565 | JZ_IPU_D_FMT_RGB_OUT_OFT_BGR; break; case DRM_FORMAT_XRGB8888: case DRM_FORMAT_XYUV8888: format = JZ_IPU_D_FMT_IN_FMT_RGB888 | JZ_IPU_D_FMT_RGB_OUT_OFT_RGB; break; case DRM_FORMAT_XBGR8888: format = JZ_IPU_D_FMT_IN_FMT_RGB888 | JZ_IPU_D_FMT_RGB_OUT_OFT_BGR; break; case DRM_FORMAT_YUYV: format = JZ_IPU_D_FMT_IN_FMT_YUV422 | JZ_IPU_D_FMT_YUV_VY1UY0; break; case DRM_FORMAT_YVYU: format = JZ_IPU_D_FMT_IN_FMT_YUV422 | JZ_IPU_D_FMT_YUV_UY1VY0; break; case DRM_FORMAT_UYVY: format = JZ_IPU_D_FMT_IN_FMT_YUV422 | JZ_IPU_D_FMT_YUV_Y1VY0U; break; case DRM_FORMAT_VYUY: format = JZ_IPU_D_FMT_IN_FMT_YUV422 | JZ_IPU_D_FMT_YUV_Y1UY0V; break; case DRM_FORMAT_YUV411: format = JZ_IPU_D_FMT_IN_FMT_YUV411; break; case DRM_FORMAT_YUV420: format = JZ_IPU_D_FMT_IN_FMT_YUV420; break; case DRM_FORMAT_YUV422: format = JZ_IPU_D_FMT_IN_FMT_YUV422; break; case DRM_FORMAT_YUV444: format = JZ_IPU_D_FMT_IN_FMT_YUV444; break; default: WARN_ONCE(1, "Unsupported format"); break; } /* Fix output to RGB888 */ format |= JZ_IPU_D_FMT_OUT_FMT_RGB888; /* Set pixel format */ regmap_write(ipu->map, JZ_REG_IPU_D_FMT, format); /* Set the output height/width/stride */ regmap_write(ipu->map, JZ_REG_IPU_OUT_GS, ((newstate->crtc_w * 4) << JZ_IPU_OUT_GS_W_LSB) | newstate->crtc_h << JZ_IPU_OUT_GS_H_LSB); regmap_write(ipu->map, JZ_REG_IPU_OUT_STRIDE, newstate->crtc_w * 4); if (finfo->is_yuv) { regmap_set_bits(ipu->map, JZ_REG_IPU_CTRL, JZ_IPU_CTRL_CSC_EN); /* * Offsets for Chroma/Luma. * y = source Y - LUMA, * u = source Cb - CHROMA, * v = source Cr - CHROMA */ regmap_write(ipu->map, JZ_REG_IPU_CSC_OFFSET, 128 << JZ_IPU_CSC_OFFSET_CHROMA_LSB | 0 << JZ_IPU_CSC_OFFSET_LUMA_LSB); /* * YUV422 to RGB conversion table. * R = C0 / 0x400 * y + C1 / 0x400 * v * G = C0 / 0x400 * y - C2 / 0x400 * u - C3 / 0x400 * v * B = C0 / 0x400 * y + C4 / 0x400 * u */ regmap_write(ipu->map, JZ_REG_IPU_CSC_C0_COEF, 0x4a8); regmap_write(ipu->map, JZ_REG_IPU_CSC_C1_COEF, 0x662); regmap_write(ipu->map, JZ_REG_IPU_CSC_C2_COEF, 0x191); regmap_write(ipu->map, JZ_REG_IPU_CSC_C3_COEF, 0x341); regmap_write(ipu->map, JZ_REG_IPU_CSC_C4_COEF, 0x811); } ctrl = 0; /* * Must set ZOOM_SEL before programming bicubic LUTs. * If the IPU supports bicubic, we enable it unconditionally, since it * can do anything bilinear can and more. */ if (ipu->soc_info->has_bicubic) ctrl |= JZ_IPU_CTRL_ZOOM_SEL; upscaling_w = ipu->num_w > ipu->denom_w; if (upscaling_w) ctrl |= JZ_IPU_CTRL_HSCALE; if (ipu->num_w != 1 || ipu->denom_w != 1) { if (!ipu->soc_info->has_bicubic && !upscaling_w) coef_index |= (ipu->denom_w - 1) << 16; else coef_index |= (ipu->num_w - 1) << 16; ctrl |= JZ_IPU_CTRL_HRSZ_EN; } upscaling_h = ipu->num_h > ipu->denom_h; if (upscaling_h) ctrl |= JZ_IPU_CTRL_VSCALE; if (ipu->num_h != 1 || ipu->denom_h != 1) { if (!ipu->soc_info->has_bicubic && !upscaling_h) coef_index |= ipu->denom_h - 1; else coef_index |= ipu->num_h - 1; ctrl |= JZ_IPU_CTRL_VRSZ_EN; } regmap_update_bits(ipu->map, JZ_REG_IPU_CTRL, JZ_IPU_CTRL_ZOOM_SEL | JZ_IPU_CTRL_HRSZ_EN | JZ_IPU_CTRL_VRSZ_EN | JZ_IPU_CTRL_HSCALE | JZ_IPU_CTRL_VSCALE, ctrl); /* Set the LUT index register */ regmap_write(ipu->map, JZ_REG_IPU_RSZ_COEF_INDEX, coef_index); if (ipu->num_w != 1 || ipu->denom_w != 1) ingenic_ipu_set_coefs(ipu, JZ_REG_IPU_HRSZ_COEF_LUT, ipu->num_w, ipu->denom_w); if (ipu->num_h != 1 || ipu->denom_h != 1) ingenic_ipu_set_coefs(ipu, JZ_REG_IPU_VRSZ_COEF_LUT, ipu->num_h, ipu->denom_h); /* Clear STATUS register */ regmap_write(ipu->map, JZ_REG_IPU_STATUS, 0); /* Start IPU */ regmap_set_bits(ipu->map, JZ_REG_IPU_CTRL, JZ_IPU_CTRL_RUN | JZ_IPU_CTRL_FM_IRQ_EN); dev_dbg(ipu->dev, "Scaling %ux%u to %ux%u (%u:%u horiz, %u:%u vert)\n", newstate->src_w >> 16, newstate->src_h >> 16, newstate->crtc_w, newstate->crtc_h, ipu->num_w, ipu->denom_w, ipu->num_h, ipu->denom_h); } static int ingenic_ipu_plane_atomic_check(struct drm_plane *plane, struct drm_atomic_state *state) { struct drm_plane_state *old_plane_state = drm_atomic_get_old_plane_state(state, plane); struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, plane); unsigned int num_w, denom_w, num_h, denom_h, xres, yres, max_w, max_h; struct ingenic_ipu *ipu = plane_to_ingenic_ipu(plane); struct drm_crtc *crtc = new_plane_state->crtc ?: old_plane_state->crtc; struct drm_crtc_state *crtc_state; if (!crtc) return 0; crtc_state = drm_atomic_get_existing_crtc_state(state, crtc); if (WARN_ON(!crtc_state)) return -EINVAL; /* Request a full modeset if we are enabling or disabling the IPU. */ if (!old_plane_state->crtc ^ !new_plane_state->crtc) crtc_state->mode_changed = true; if (!new_plane_state->crtc || !crtc_state->mode.hdisplay || !crtc_state->mode.vdisplay) return 0; /* Plane must be fully visible */ if (new_plane_state->crtc_x < 0 || new_plane_state->crtc_y < 0 || new_plane_state->crtc_x + new_plane_state->crtc_w > crtc_state->mode.hdisplay || new_plane_state->crtc_y + new_plane_state->crtc_h > crtc_state->mode.vdisplay) return -EINVAL; /* Minimum size is 4x4 */ if ((new_plane_state->src_w >> 16) < 4 || (new_plane_state->src_h >> 16) < 4) return -EINVAL; /* Input and output lines must have an even number of pixels. */ if (((new_plane_state->src_w >> 16) & 1) || (new_plane_state->crtc_w & 1)) return -EINVAL; if (!osd_changed(new_plane_state, old_plane_state)) return 0; crtc_state->mode_changed = true; xres = new_plane_state->src_w >> 16; yres = new_plane_state->src_h >> 16; /* * Increase the scaled image's theorical width/height until we find a * configuration that has valid scaling coefficients, up to 102% of the * screen's resolution. This makes sure that we can scale from almost * every resolution possible at the cost of a very small distorsion. * The CRTC_W / CRTC_H are not modified. */ max_w = crtc_state->mode.hdisplay * 102 / 100; max_h = crtc_state->mode.vdisplay * 102 / 100; for (denom_w = xres, num_w = new_plane_state->crtc_w; num_w <= max_w; num_w++) if (!reduce_fraction(&num_w, &denom_w)) break; if (num_w > max_w) return -EINVAL; for (denom_h = yres, num_h = new_plane_state->crtc_h; num_h <= max_h; num_h++) if (!reduce_fraction(&num_h, &denom_h)) break; if (num_h > max_h) return -EINVAL; ipu->num_w = num_w; ipu->num_h = num_h; ipu->denom_w = denom_w; ipu->denom_h = denom_h; return 0; } static void ingenic_ipu_plane_atomic_disable(struct drm_plane *plane, struct drm_atomic_state *state) { struct ingenic_ipu *ipu = plane_to_ingenic_ipu(plane); regmap_set_bits(ipu->map, JZ_REG_IPU_CTRL, JZ_IPU_CTRL_STOP); regmap_clear_bits(ipu->map, JZ_REG_IPU_CTRL, JZ_IPU_CTRL_CHIP_EN); ingenic_drm_plane_disable(ipu->master, plane); if (ipu->clk_enabled) { clk_disable(ipu->clk); ipu->clk_enabled = false; } } static const struct drm_plane_helper_funcs ingenic_ipu_plane_helper_funcs = { .atomic_update = ingenic_ipu_plane_atomic_update, .atomic_check = ingenic_ipu_plane_atomic_check, .atomic_disable = ingenic_ipu_plane_atomic_disable, .prepare_fb = drm_gem_plane_helper_prepare_fb, }; static int ingenic_ipu_plane_atomic_get_property(struct drm_plane *plane, const struct drm_plane_state *state, struct drm_property *property, u64 *val) { struct ingenic_ipu *ipu = plane_to_ingenic_ipu(plane); if (property != ipu->sharpness_prop) return -EINVAL; *val = ipu->sharpness; return 0; } static int ingenic_ipu_plane_atomic_set_property(struct drm_plane *plane, struct drm_plane_state *state, struct drm_property *property, u64 val) { struct ingenic_ipu *ipu = plane_to_ingenic_ipu(plane); struct drm_crtc_state *crtc_state; if (property != ipu->sharpness_prop) return -EINVAL; ipu->sharpness = val; if (state->crtc) { crtc_state = drm_atomic_get_existing_crtc_state(state->state, state->crtc); if (WARN_ON(!crtc_state)) return -EINVAL; crtc_state->mode_changed = true; } return 0; } static const struct drm_plane_funcs ingenic_ipu_plane_funcs = { .update_plane = drm_atomic_helper_update_plane, .disable_plane = drm_atomic_helper_disable_plane, .reset = drm_atomic_helper_plane_reset, .destroy = drm_plane_cleanup, .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state, .atomic_destroy_state = drm_atomic_helper_plane_destroy_state, .atomic_get_property = ingenic_ipu_plane_atomic_get_property, .atomic_set_property = ingenic_ipu_plane_atomic_set_property, }; static irqreturn_t ingenic_ipu_irq_handler(int irq, void *arg) { struct ingenic_ipu *ipu = arg; struct drm_crtc *crtc = drm_crtc_from_index(ipu->drm, 0); unsigned int dummy; /* dummy read allows CPU to reconfigure IPU */ if (ipu->soc_info->manual_restart) regmap_read(ipu->map, JZ_REG_IPU_STATUS, &dummy); /* ACK interrupt */ regmap_write(ipu->map, JZ_REG_IPU_STATUS, 0); /* Set previously cached addresses */ regmap_write(ipu->map, JZ_REG_IPU_Y_ADDR, ipu->addr_y); regmap_write(ipu->map, JZ_REG_IPU_U_ADDR, ipu->addr_u); regmap_write(ipu->map, JZ_REG_IPU_V_ADDR, ipu->addr_v); /* Run IPU for the new frame */ if (ipu->soc_info->manual_restart) regmap_set_bits(ipu->map, JZ_REG_IPU_CTRL, JZ_IPU_CTRL_RUN); drm_crtc_handle_vblank(crtc); return IRQ_HANDLED; } static const struct regmap_config ingenic_ipu_regmap_config = { .reg_bits = 32, .val_bits = 32, .reg_stride = 4, .max_register = JZ_REG_IPU_OUT_PHY_T_ADDR, }; static int ingenic_ipu_bind(struct device *dev, struct device *master, void *d) { struct platform_device *pdev = to_platform_device(dev); const struct soc_info *soc_info; struct drm_device *drm = d; struct drm_plane *plane; struct ingenic_ipu *ipu; void __iomem *base; unsigned int sharpness_max; int err, irq; ipu = devm_kzalloc(dev, sizeof(*ipu), GFP_KERNEL); if (!ipu) return -ENOMEM; soc_info = of_device_get_match_data(dev); if (!soc_info) { dev_err(dev, "Missing platform data\n"); return -EINVAL; } ipu->dev = dev; ipu->drm = drm; ipu->master = master; ipu->soc_info = soc_info; base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(base)) { dev_err(dev, "Failed to get memory resource\n"); return PTR_ERR(base); } ipu->map = devm_regmap_init_mmio(dev, base, &ingenic_ipu_regmap_config); if (IS_ERR(ipu->map)) { dev_err(dev, "Failed to create regmap\n"); return PTR_ERR(ipu->map); } irq = platform_get_irq(pdev, 0); if (irq < 0) return irq; ipu->clk = devm_clk_get(dev, "ipu"); if (IS_ERR(ipu->clk)) { dev_err(dev, "Failed to get pixel clock\n"); return PTR_ERR(ipu->clk); } err = devm_request_irq(dev, irq, ingenic_ipu_irq_handler, 0, dev_name(dev), ipu); if (err) { dev_err(dev, "Unable to request IRQ\n"); return err; } plane = &ipu->plane; dev_set_drvdata(dev, plane); drm_plane_helper_add(plane, &ingenic_ipu_plane_helper_funcs); err = drm_universal_plane_init(drm, plane, 1, &ingenic_ipu_plane_funcs, soc_info->formats, soc_info->num_formats, NULL, DRM_PLANE_TYPE_PRIMARY, NULL); if (err) { dev_err(dev, "Failed to init plane: %i\n", err); return err; } /* * Sharpness settings range is [0,32] * 0 : nearest-neighbor * 1 : bilinear * 2 .. 32 : bicubic (translated to sharpness factor -0.25 .. -4.0) */ sharpness_max = soc_info->has_bicubic ? 32 : 1; ipu->sharpness_prop = drm_property_create_range(drm, 0, "sharpness", 0, sharpness_max); if (!ipu->sharpness_prop) { dev_err(dev, "Unable to create sharpness property\n"); return -ENOMEM; } /* Default sharpness factor: -0.125 * 8 = -1.0 */ ipu->sharpness = soc_info->has_bicubic ? 8 : 1; drm_object_attach_property(&plane->base, ipu->sharpness_prop, ipu->sharpness); err = clk_prepare(ipu->clk); if (err) { dev_err(dev, "Unable to prepare clock\n"); return err; } return 0; } static void ingenic_ipu_unbind(struct device *dev, struct device *master, void *d) { struct ingenic_ipu *ipu = dev_get_drvdata(dev); clk_unprepare(ipu->clk); } static const struct component_ops ingenic_ipu_ops = { .bind = ingenic_ipu_bind, .unbind = ingenic_ipu_unbind, }; static int ingenic_ipu_probe(struct platform_device *pdev) { return component_add(&pdev->dev, &ingenic_ipu_ops); } static int ingenic_ipu_remove(struct platform_device *pdev) { component_del(&pdev->dev, &ingenic_ipu_ops); return 0; } static const u32 jz4725b_ipu_formats[] = { /* * While officially supported, packed YUV 4:2:2 formats can cause * random hardware crashes on JZ4725B under certain circumstances. * It seems to happen with some specific resize ratios. * Until a proper workaround or fix is found, disable these formats. DRM_FORMAT_YUYV, DRM_FORMAT_YVYU, DRM_FORMAT_UYVY, DRM_FORMAT_VYUY, */ DRM_FORMAT_YUV411, DRM_FORMAT_YUV420, DRM_FORMAT_YUV422, DRM_FORMAT_YUV444, }; static const struct soc_info jz4725b_soc_info = { .formats = jz4725b_ipu_formats, .num_formats = ARRAY_SIZE(jz4725b_ipu_formats), .has_bicubic = false, .manual_restart = true, .set_coefs = jz4725b_set_coefs, }; static const u32 jz4760_ipu_formats[] = { DRM_FORMAT_XRGB1555, DRM_FORMAT_XBGR1555, DRM_FORMAT_RGB565, DRM_FORMAT_BGR565, DRM_FORMAT_XRGB8888, DRM_FORMAT_XBGR8888, DRM_FORMAT_YUYV, DRM_FORMAT_YVYU, DRM_FORMAT_UYVY, DRM_FORMAT_VYUY, DRM_FORMAT_YUV411, DRM_FORMAT_YUV420, DRM_FORMAT_YUV422, DRM_FORMAT_YUV444, DRM_FORMAT_XYUV8888, }; static const struct soc_info jz4760_soc_info = { .formats = jz4760_ipu_formats, .num_formats = ARRAY_SIZE(jz4760_ipu_formats), .has_bicubic = true, .manual_restart = false, .set_coefs = jz4760_set_coefs, }; static const struct of_device_id ingenic_ipu_of_match[] = { { .compatible = "ingenic,jz4725b-ipu", .data = &jz4725b_soc_info }, { .compatible = "ingenic,jz4760-ipu", .data = &jz4760_soc_info }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, ingenic_ipu_of_match); static struct platform_driver ingenic_ipu_driver = { .driver = { .name = "ingenic-ipu", .of_match_table = ingenic_ipu_of_match, }, .probe = ingenic_ipu_probe, .remove = ingenic_ipu_remove, }; struct platform_driver *ingenic_ipu_driver_ptr = &ingenic_ipu_driver;