/* * Copyright © 1997-2003 by The XFree86 Project, Inc. * Copyright © 2007 Dave Airlie * Copyright © 2007-2008 Intel Corporation * Jesse Barnes <jesse.barnes@intel.com> * Copyright 2005-2006 Luc Verhaegen * Copyright (c) 2001, Andy Ritger aritger@nvidia.com * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. * * Except as contained in this notice, the name of the copyright holder(s) * and author(s) shall not be used in advertising or otherwise to promote * the sale, use or other dealings in this Software without prior written * authorization from the copyright holder(s) and author(s). */ #include <linux/list.h> #include <linux/list_sort.h> #include <linux/export.h> #include <drm/drmP.h> #include <drm/drm_crtc.h> #include <video/of_videomode.h> #include <video/videomode.h> #include <drm/drm_modes.h> #include "drm_crtc_internal.h" /** * drm_mode_debug_printmodeline - print a mode to dmesg * @mode: mode to print * * Describe @mode using DRM_DEBUG. */ void drm_mode_debug_printmodeline(const struct drm_display_mode *mode) { DRM_DEBUG_KMS("Modeline " DRM_MODE_FMT "\n", DRM_MODE_ARG(mode)); } EXPORT_SYMBOL(drm_mode_debug_printmodeline); /** * drm_mode_create - create a new display mode * @dev: DRM device * * Create a new, cleared drm_display_mode with kzalloc, allocate an ID for it * and return it. * * Returns: * Pointer to new mode on success, NULL on error. */ struct drm_display_mode *drm_mode_create(struct drm_device *dev) { struct drm_display_mode *nmode; nmode = kzalloc(sizeof(struct drm_display_mode), GFP_KERNEL); if (!nmode) return NULL; return nmode; } EXPORT_SYMBOL(drm_mode_create); /** * drm_mode_destroy - remove a mode * @dev: DRM device * @mode: mode to remove * * Release @mode's unique ID, then free it @mode structure itself using kfree. */ void drm_mode_destroy(struct drm_device *dev, struct drm_display_mode *mode) { if (!mode) return; kfree(mode); } EXPORT_SYMBOL(drm_mode_destroy); /** * drm_mode_probed_add - add a mode to a connector's probed_mode list * @connector: connector the new mode * @mode: mode data * * Add @mode to @connector's probed_mode list for later use. This list should * then in a second step get filtered and all the modes actually supported by * the hardware moved to the @connector's modes list. */ void drm_mode_probed_add(struct drm_connector *connector, struct drm_display_mode *mode) { WARN_ON(!mutex_is_locked(&connector->dev->mode_config.mutex)); list_add_tail(&mode->head, &connector->probed_modes); } EXPORT_SYMBOL(drm_mode_probed_add); /** * drm_cvt_mode -create a modeline based on the CVT algorithm * @dev: drm device * @hdisplay: hdisplay size * @vdisplay: vdisplay size * @vrefresh: vrefresh rate * @reduced: whether to use reduced blanking * @interlaced: whether to compute an interlaced mode * @margins: whether to add margins (borders) * * This function is called to generate the modeline based on CVT algorithm * according to the hdisplay, vdisplay, vrefresh. * It is based from the VESA(TM) Coordinated Video Timing Generator by * Graham Loveridge April 9, 2003 available at * http://www.elo.utfsm.cl/~elo212/docs/CVTd6r1.xls * * And it is copied from xf86CVTmode in xserver/hw/xfree86/modes/xf86cvt.c. * What I have done is to translate it by using integer calculation. * * Returns: * The modeline based on the CVT algorithm stored in a drm_display_mode object. * The display mode object is allocated with drm_mode_create(). Returns NULL * when no mode could be allocated. */ struct drm_display_mode *drm_cvt_mode(struct drm_device *dev, int hdisplay, int vdisplay, int vrefresh, bool reduced, bool interlaced, bool margins) { #define HV_FACTOR 1000 /* 1) top/bottom margin size (% of height) - default: 1.8, */ #define CVT_MARGIN_PERCENTAGE 18 /* 2) character cell horizontal granularity (pixels) - default 8 */ #define CVT_H_GRANULARITY 8 /* 3) Minimum vertical porch (lines) - default 3 */ #define CVT_MIN_V_PORCH 3 /* 4) Minimum number of vertical back porch lines - default 6 */ #define CVT_MIN_V_BPORCH 6 /* Pixel Clock step (kHz) */ #define CVT_CLOCK_STEP 250 struct drm_display_mode *drm_mode; unsigned int vfieldrate, hperiod; int hdisplay_rnd, hmargin, vdisplay_rnd, vmargin, vsync; int interlace; u64 tmp; /* allocate the drm_display_mode structure. If failure, we will * return directly */ drm_mode = drm_mode_create(dev); if (!drm_mode) return NULL; /* the CVT default refresh rate is 60Hz */ if (!vrefresh) vrefresh = 60; /* the required field fresh rate */ if (interlaced) vfieldrate = vrefresh * 2; else vfieldrate = vrefresh; /* horizontal pixels */ hdisplay_rnd = hdisplay - (hdisplay % CVT_H_GRANULARITY); /* determine the left&right borders */ hmargin = 0; if (margins) { hmargin = hdisplay_rnd * CVT_MARGIN_PERCENTAGE / 1000; hmargin -= hmargin % CVT_H_GRANULARITY; } /* find the total active pixels */ drm_mode->hdisplay = hdisplay_rnd + 2 * hmargin; /* find the number of lines per field */ if (interlaced) vdisplay_rnd = vdisplay / 2; else vdisplay_rnd = vdisplay; /* find the top & bottom borders */ vmargin = 0; if (margins) vmargin = vdisplay_rnd * CVT_MARGIN_PERCENTAGE / 1000; drm_mode->vdisplay = vdisplay + 2 * vmargin; /* Interlaced */ if (interlaced) interlace = 1; else interlace = 0; /* Determine VSync Width from aspect ratio */ if (!(vdisplay % 3) && ((vdisplay * 4 / 3) == hdisplay)) vsync = 4; else if (!(vdisplay % 9) && ((vdisplay * 16 / 9) == hdisplay)) vsync = 5; else if (!(vdisplay % 10) && ((vdisplay * 16 / 10) == hdisplay)) vsync = 6; else if (!(vdisplay % 4) && ((vdisplay * 5 / 4) == hdisplay)) vsync = 7; else if (!(vdisplay % 9) && ((vdisplay * 15 / 9) == hdisplay)) vsync = 7; else /* custom */ vsync = 10; if (!reduced) { /* simplify the GTF calculation */ /* 4) Minimum time of vertical sync + back porch interval (µs) * default 550.0 */ int tmp1, tmp2; #define CVT_MIN_VSYNC_BP 550 /* 3) Nominal HSync width (% of line period) - default 8 */ #define CVT_HSYNC_PERCENTAGE 8 unsigned int hblank_percentage; int vsyncandback_porch, vback_porch, hblank; /* estimated the horizontal period */ tmp1 = HV_FACTOR * 1000000 - CVT_MIN_VSYNC_BP * HV_FACTOR * vfieldrate; tmp2 = (vdisplay_rnd + 2 * vmargin + CVT_MIN_V_PORCH) * 2 + interlace; hperiod = tmp1 * 2 / (tmp2 * vfieldrate); tmp1 = CVT_MIN_VSYNC_BP * HV_FACTOR / hperiod + 1; /* 9. Find number of lines in sync + backporch */ if (tmp1 < (vsync + CVT_MIN_V_PORCH)) vsyncandback_porch = vsync + CVT_MIN_V_PORCH; else vsyncandback_porch = tmp1; /* 10. Find number of lines in back porch */ vback_porch = vsyncandback_porch - vsync; drm_mode->vtotal = vdisplay_rnd + 2 * vmargin + vsyncandback_porch + CVT_MIN_V_PORCH; /* 5) Definition of Horizontal blanking time limitation */ /* Gradient (%/kHz) - default 600 */ #define CVT_M_FACTOR 600 /* Offset (%) - default 40 */ #define CVT_C_FACTOR 40 /* Blanking time scaling factor - default 128 */ #define CVT_K_FACTOR 128 /* Scaling factor weighting - default 20 */ #define CVT_J_FACTOR 20 #define CVT_M_PRIME (CVT_M_FACTOR * CVT_K_FACTOR / 256) #define CVT_C_PRIME ((CVT_C_FACTOR - CVT_J_FACTOR) * CVT_K_FACTOR / 256 + \ CVT_J_FACTOR) /* 12. Find ideal blanking duty cycle from formula */ hblank_percentage = CVT_C_PRIME * HV_FACTOR - CVT_M_PRIME * hperiod / 1000; /* 13. Blanking time */ if (hblank_percentage < 20 * HV_FACTOR) hblank_percentage = 20 * HV_FACTOR; hblank = drm_mode->hdisplay * hblank_percentage / (100 * HV_FACTOR - hblank_percentage); hblank -= hblank % (2 * CVT_H_GRANULARITY); /* 14. find the total pixels per line */ drm_mode->htotal = drm_mode->hdisplay + hblank; drm_mode->hsync_end = drm_mode->hdisplay + hblank / 2; drm_mode->hsync_start = drm_mode->hsync_end - (drm_mode->htotal * CVT_HSYNC_PERCENTAGE) / 100; drm_mode->hsync_start += CVT_H_GRANULARITY - drm_mode->hsync_start % CVT_H_GRANULARITY; /* fill the Vsync values */ drm_mode->vsync_start = drm_mode->vdisplay + CVT_MIN_V_PORCH; drm_mode->vsync_end = drm_mode->vsync_start + vsync; } else { /* Reduced blanking */ /* Minimum vertical blanking interval time (µs)- default 460 */ #define CVT_RB_MIN_VBLANK 460 /* Fixed number of clocks for horizontal sync */ #define CVT_RB_H_SYNC 32 /* Fixed number of clocks for horizontal blanking */ #define CVT_RB_H_BLANK 160 /* Fixed number of lines for vertical front porch - default 3*/ #define CVT_RB_VFPORCH 3 int vbilines; int tmp1, tmp2; /* 8. Estimate Horizontal period. */ tmp1 = HV_FACTOR * 1000000 - CVT_RB_MIN_VBLANK * HV_FACTOR * vfieldrate; tmp2 = vdisplay_rnd + 2 * vmargin; hperiod = tmp1 / (tmp2 * vfieldrate); /* 9. Find number of lines in vertical blanking */ vbilines = CVT_RB_MIN_VBLANK * HV_FACTOR / hperiod + 1; /* 10. Check if vertical blanking is sufficient */ if (vbilines < (CVT_RB_VFPORCH + vsync + CVT_MIN_V_BPORCH)) vbilines = CVT_RB_VFPORCH + vsync + CVT_MIN_V_BPORCH; /* 11. Find total number of lines in vertical field */ drm_mode->vtotal = vdisplay_rnd + 2 * vmargin + vbilines; /* 12. Find total number of pixels in a line */ drm_mode->htotal = drm_mode->hdisplay + CVT_RB_H_BLANK; /* Fill in HSync values */ drm_mode->hsync_end = drm_mode->hdisplay + CVT_RB_H_BLANK / 2; drm_mode->hsync_start = drm_mode->hsync_end - CVT_RB_H_SYNC; /* Fill in VSync values */ drm_mode->vsync_start = drm_mode->vdisplay + CVT_RB_VFPORCH; drm_mode->vsync_end = drm_mode->vsync_start + vsync; } /* 15/13. Find pixel clock frequency (kHz for xf86) */ tmp = drm_mode->htotal; /* perform intermediate calcs in u64 */ tmp *= HV_FACTOR * 1000; do_div(tmp, hperiod); tmp -= drm_mode->clock % CVT_CLOCK_STEP; drm_mode->clock = tmp; /* 18/16. Find actual vertical frame frequency */ /* ignore - just set the mode flag for interlaced */ if (interlaced) { drm_mode->vtotal *= 2; drm_mode->flags |= DRM_MODE_FLAG_INTERLACE; } /* Fill the mode line name */ drm_mode_set_name(drm_mode); if (reduced) drm_mode->flags |= (DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC); else drm_mode->flags |= (DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_NHSYNC); return drm_mode; } EXPORT_SYMBOL(drm_cvt_mode); /** * drm_gtf_mode_complex - create the modeline based on the full GTF algorithm * @dev: drm device * @hdisplay: hdisplay size * @vdisplay: vdisplay size * @vrefresh: vrefresh rate. * @interlaced: whether to compute an interlaced mode * @margins: desired margin (borders) size * @GTF_M: extended GTF formula parameters * @GTF_2C: extended GTF formula parameters * @GTF_K: extended GTF formula parameters * @GTF_2J: extended GTF formula parameters * * GTF feature blocks specify C and J in multiples of 0.5, so we pass them * in here multiplied by two. For a C of 40, pass in 80. * * Returns: * The modeline based on the full GTF algorithm stored in a drm_display_mode object. * The display mode object is allocated with drm_mode_create(). Returns NULL * when no mode could be allocated. */ struct drm_display_mode * drm_gtf_mode_complex(struct drm_device *dev, int hdisplay, int vdisplay, int vrefresh, bool interlaced, int margins, int GTF_M, int GTF_2C, int GTF_K, int GTF_2J) { /* 1) top/bottom margin size (% of height) - default: 1.8, */ #define GTF_MARGIN_PERCENTAGE 18 /* 2) character cell horizontal granularity (pixels) - default 8 */ #define GTF_CELL_GRAN 8 /* 3) Minimum vertical porch (lines) - default 3 */ #define GTF_MIN_V_PORCH 1 /* width of vsync in lines */ #define V_SYNC_RQD 3 /* width of hsync as % of total line */ #define H_SYNC_PERCENT 8 /* min time of vsync + back porch (microsec) */ #define MIN_VSYNC_PLUS_BP 550 /* C' and M' are part of the Blanking Duty Cycle computation */ #define GTF_C_PRIME ((((GTF_2C - GTF_2J) * GTF_K / 256) + GTF_2J) / 2) #define GTF_M_PRIME (GTF_K * GTF_M / 256) struct drm_display_mode *drm_mode; unsigned int hdisplay_rnd, vdisplay_rnd, vfieldrate_rqd; int top_margin, bottom_margin; int interlace; unsigned int hfreq_est; int vsync_plus_bp, vback_porch; unsigned int vtotal_lines, vfieldrate_est, hperiod; unsigned int vfield_rate, vframe_rate; int left_margin, right_margin; unsigned int total_active_pixels, ideal_duty_cycle; unsigned int hblank, total_pixels, pixel_freq; int hsync, hfront_porch, vodd_front_porch_lines; unsigned int tmp1, tmp2; drm_mode = drm_mode_create(dev); if (!drm_mode) return NULL; /* 1. In order to give correct results, the number of horizontal * pixels requested is first processed to ensure that it is divisible * by the character size, by rounding it to the nearest character * cell boundary: */ hdisplay_rnd = (hdisplay + GTF_CELL_GRAN / 2) / GTF_CELL_GRAN; hdisplay_rnd = hdisplay_rnd * GTF_CELL_GRAN; /* 2. If interlace is requested, the number of vertical lines assumed * by the calculation must be halved, as the computation calculates * the number of vertical lines per field. */ if (interlaced) vdisplay_rnd = vdisplay / 2; else vdisplay_rnd = vdisplay; /* 3. Find the frame rate required: */ if (interlaced) vfieldrate_rqd = vrefresh * 2; else vfieldrate_rqd = vrefresh; /* 4. Find number of lines in Top margin: */ top_margin = 0; if (margins) top_margin = (vdisplay_rnd * GTF_MARGIN_PERCENTAGE + 500) / 1000; /* 5. Find number of lines in bottom margin: */ bottom_margin = top_margin; /* 6. If interlace is required, then set variable interlace: */ if (interlaced) interlace = 1; else interlace = 0; /* 7. Estimate the Horizontal frequency */ { tmp1 = (1000000 - MIN_VSYNC_PLUS_BP * vfieldrate_rqd) / 500; tmp2 = (vdisplay_rnd + 2 * top_margin + GTF_MIN_V_PORCH) * 2 + interlace; hfreq_est = (tmp2 * 1000 * vfieldrate_rqd) / tmp1; } /* 8. Find the number of lines in V sync + back porch */ /* [V SYNC+BP] = RINT(([MIN VSYNC+BP] * hfreq_est / 1000000)) */ vsync_plus_bp = MIN_VSYNC_PLUS_BP * hfreq_est / 1000; vsync_plus_bp = (vsync_plus_bp + 500) / 1000; /* 9. Find the number of lines in V back porch alone: */ vback_porch = vsync_plus_bp - V_SYNC_RQD; /* 10. Find the total number of lines in Vertical field period: */ vtotal_lines = vdisplay_rnd + top_margin + bottom_margin + vsync_plus_bp + GTF_MIN_V_PORCH; /* 11. Estimate the Vertical field frequency: */ vfieldrate_est = hfreq_est / vtotal_lines; /* 12. Find the actual horizontal period: */ hperiod = 1000000 / (vfieldrate_rqd * vtotal_lines); /* 13. Find the actual Vertical field frequency: */ vfield_rate = hfreq_est / vtotal_lines; /* 14. Find the Vertical frame frequency: */ if (interlaced) vframe_rate = vfield_rate / 2; else vframe_rate = vfield_rate; /* 15. Find number of pixels in left margin: */ if (margins) left_margin = (hdisplay_rnd * GTF_MARGIN_PERCENTAGE + 500) / 1000; else left_margin = 0; /* 16.Find number of pixels in right margin: */ right_margin = left_margin; /* 17.Find total number of active pixels in image and left and right */ total_active_pixels = hdisplay_rnd + left_margin + right_margin; /* 18.Find the ideal blanking duty cycle from blanking duty cycle */ ideal_duty_cycle = GTF_C_PRIME * 1000 - (GTF_M_PRIME * 1000000 / hfreq_est); /* 19.Find the number of pixels in the blanking time to the nearest * double character cell: */ hblank = total_active_pixels * ideal_duty_cycle / (100000 - ideal_duty_cycle); hblank = (hblank + GTF_CELL_GRAN) / (2 * GTF_CELL_GRAN); hblank = hblank * 2 * GTF_CELL_GRAN; /* 20.Find total number of pixels: */ total_pixels = total_active_pixels + hblank; /* 21.Find pixel clock frequency: */ pixel_freq = total_pixels * hfreq_est / 1000; /* Stage 1 computations are now complete; I should really pass * the results to another function and do the Stage 2 computations, * but I only need a few more values so I'll just append the * computations here for now */ /* 17. Find the number of pixels in the horizontal sync period: */ hsync = H_SYNC_PERCENT * total_pixels / 100; hsync = (hsync + GTF_CELL_GRAN / 2) / GTF_CELL_GRAN; hsync = hsync * GTF_CELL_GRAN; /* 18. Find the number of pixels in horizontal front porch period */ hfront_porch = hblank / 2 - hsync; /* 36. Find the number of lines in the odd front porch period: */ vodd_front_porch_lines = GTF_MIN_V_PORCH ; /* finally, pack the results in the mode struct */ drm_mode->hdisplay = hdisplay_rnd; drm_mode->hsync_start = hdisplay_rnd + hfront_porch; drm_mode->hsync_end = drm_mode->hsync_start + hsync; drm_mode->htotal = total_pixels; drm_mode->vdisplay = vdisplay_rnd; drm_mode->vsync_start = vdisplay_rnd + vodd_front_porch_lines; drm_mode->vsync_end = drm_mode->vsync_start + V_SYNC_RQD; drm_mode->vtotal = vtotal_lines; drm_mode->clock = pixel_freq; if (interlaced) { drm_mode->vtotal *= 2; drm_mode->flags |= DRM_MODE_FLAG_INTERLACE; } drm_mode_set_name(drm_mode); if (GTF_M == 600 && GTF_2C == 80 && GTF_K == 128 && GTF_2J == 40) drm_mode->flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC; else drm_mode->flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC; return drm_mode; } EXPORT_SYMBOL(drm_gtf_mode_complex); /** * drm_gtf_mode - create the modeline based on the GTF algorithm * @dev: drm device * @hdisplay: hdisplay size * @vdisplay: vdisplay size * @vrefresh: vrefresh rate. * @interlaced: whether to compute an interlaced mode * @margins: desired margin (borders) size * * return the modeline based on GTF algorithm * * This function is to create the modeline based on the GTF algorithm. * Generalized Timing Formula is derived from: * * GTF Spreadsheet by Andy Morrish (1/5/97) * available at http://www.vesa.org * * And it is copied from the file of xserver/hw/xfree86/modes/xf86gtf.c. * What I have done is to translate it by using integer calculation. * I also refer to the function of fb_get_mode in the file of * drivers/video/fbmon.c * * Standard GTF parameters:: * * M = 600 * C = 40 * K = 128 * J = 20 * * Returns: * The modeline based on the GTF algorithm stored in a drm_display_mode object. * The display mode object is allocated with drm_mode_create(). Returns NULL * when no mode could be allocated. */ struct drm_display_mode * drm_gtf_mode(struct drm_device *dev, int hdisplay, int vdisplay, int vrefresh, bool interlaced, int margins) { return drm_gtf_mode_complex(dev, hdisplay, vdisplay, vrefresh, interlaced, margins, 600, 40 * 2, 128, 20 * 2); } EXPORT_SYMBOL(drm_gtf_mode); #ifdef CONFIG_VIDEOMODE_HELPERS /** * drm_display_mode_from_videomode - fill in @dmode using @vm, * @vm: videomode structure to use as source * @dmode: drm_display_mode structure to use as destination * * Fills out @dmode using the display mode specified in @vm. */ void drm_display_mode_from_videomode(const struct videomode *vm, struct drm_display_mode *dmode) { dmode->hdisplay = vm->hactive; dmode->hsync_start = dmode->hdisplay + vm->hfront_porch; dmode->hsync_end = dmode->hsync_start + vm->hsync_len; dmode->htotal = dmode->hsync_end + vm->hback_porch; dmode->vdisplay = vm->vactive; dmode->vsync_start = dmode->vdisplay + vm->vfront_porch; dmode->vsync_end = dmode->vsync_start + vm->vsync_len; dmode->vtotal = dmode->vsync_end + vm->vback_porch; dmode->clock = vm->pixelclock / 1000; dmode->flags = 0; if (vm->flags & DISPLAY_FLAGS_HSYNC_HIGH) dmode->flags |= DRM_MODE_FLAG_PHSYNC; else if (vm->flags & DISPLAY_FLAGS_HSYNC_LOW) dmode->flags |= DRM_MODE_FLAG_NHSYNC; if (vm->flags & DISPLAY_FLAGS_VSYNC_HIGH) dmode->flags |= DRM_MODE_FLAG_PVSYNC; else if (vm->flags & DISPLAY_FLAGS_VSYNC_LOW) dmode->flags |= DRM_MODE_FLAG_NVSYNC; if (vm->flags & DISPLAY_FLAGS_INTERLACED) dmode->flags |= DRM_MODE_FLAG_INTERLACE; if (vm->flags & DISPLAY_FLAGS_DOUBLESCAN) dmode->flags |= DRM_MODE_FLAG_DBLSCAN; if (vm->flags & DISPLAY_FLAGS_DOUBLECLK) dmode->flags |= DRM_MODE_FLAG_DBLCLK; drm_mode_set_name(dmode); } EXPORT_SYMBOL_GPL(drm_display_mode_from_videomode); /** * drm_display_mode_to_videomode - fill in @vm using @dmode, * @dmode: drm_display_mode structure to use as source * @vm: videomode structure to use as destination * * Fills out @vm using the display mode specified in @dmode. */ void drm_display_mode_to_videomode(const struct drm_display_mode *dmode, struct videomode *vm) { vm->hactive = dmode->hdisplay; vm->hfront_porch = dmode->hsync_start - dmode->hdisplay; vm->hsync_len = dmode->hsync_end - dmode->hsync_start; vm->hback_porch = dmode->htotal - dmode->hsync_end; vm->vactive = dmode->vdisplay; vm->vfront_porch = dmode->vsync_start - dmode->vdisplay; vm->vsync_len = dmode->vsync_end - dmode->vsync_start; vm->vback_porch = dmode->vtotal - dmode->vsync_end; vm->pixelclock = dmode->clock * 1000; vm->flags = 0; if (dmode->flags & DRM_MODE_FLAG_PHSYNC) vm->flags |= DISPLAY_FLAGS_HSYNC_HIGH; else if (dmode->flags & DRM_MODE_FLAG_NHSYNC) vm->flags |= DISPLAY_FLAGS_HSYNC_LOW; if (dmode->flags & DRM_MODE_FLAG_PVSYNC) vm->flags |= DISPLAY_FLAGS_VSYNC_HIGH; else if (dmode->flags & DRM_MODE_FLAG_NVSYNC) vm->flags |= DISPLAY_FLAGS_VSYNC_LOW; if (dmode->flags & DRM_MODE_FLAG_INTERLACE) vm->flags |= DISPLAY_FLAGS_INTERLACED; if (dmode->flags & DRM_MODE_FLAG_DBLSCAN) vm->flags |= DISPLAY_FLAGS_DOUBLESCAN; if (dmode->flags & DRM_MODE_FLAG_DBLCLK) vm->flags |= DISPLAY_FLAGS_DOUBLECLK; } EXPORT_SYMBOL_GPL(drm_display_mode_to_videomode); /** * drm_bus_flags_from_videomode - extract information about pixelclk and * DE polarity from videomode and store it in a separate variable * @vm: videomode structure to use * @bus_flags: information about pixelclk, sync and DE polarity will be stored * here * * Sets DRM_BUS_FLAG_DE_(LOW|HIGH), DRM_BUS_FLAG_PIXDATA_(POS|NEG)EDGE and * DISPLAY_FLAGS_SYNC_(POS|NEG)EDGE in @bus_flags according to DISPLAY_FLAGS * found in @vm */ void drm_bus_flags_from_videomode(const struct videomode *vm, u32 *bus_flags) { *bus_flags = 0; if (vm->flags & DISPLAY_FLAGS_PIXDATA_POSEDGE) *bus_flags |= DRM_BUS_FLAG_PIXDATA_POSEDGE; if (vm->flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE) *bus_flags |= DRM_BUS_FLAG_PIXDATA_NEGEDGE; if (vm->flags & DISPLAY_FLAGS_SYNC_POSEDGE) *bus_flags |= DRM_BUS_FLAG_SYNC_POSEDGE; if (vm->flags & DISPLAY_FLAGS_SYNC_NEGEDGE) *bus_flags |= DRM_BUS_FLAG_SYNC_NEGEDGE; if (vm->flags & DISPLAY_FLAGS_DE_LOW) *bus_flags |= DRM_BUS_FLAG_DE_LOW; if (vm->flags & DISPLAY_FLAGS_DE_HIGH) *bus_flags |= DRM_BUS_FLAG_DE_HIGH; } EXPORT_SYMBOL_GPL(drm_bus_flags_from_videomode); #ifdef CONFIG_OF /** * of_get_drm_display_mode - get a drm_display_mode from devicetree * @np: device_node with the timing specification * @dmode: will be set to the return value * @bus_flags: information about pixelclk, sync and DE polarity * @index: index into the list of display timings in devicetree * * This function is expensive and should only be used, if only one mode is to be * read from DT. To get multiple modes start with of_get_display_timings and * work with that instead. * * Returns: * 0 on success, a negative errno code when no of videomode node was found. */ int of_get_drm_display_mode(struct device_node *np, struct drm_display_mode *dmode, u32 *bus_flags, int index) { struct videomode vm; int ret; ret = of_get_videomode(np, &vm, index); if (ret) return ret; drm_display_mode_from_videomode(&vm, dmode); if (bus_flags) drm_bus_flags_from_videomode(&vm, bus_flags); pr_debug("%pOF: got %dx%d display mode\n", np, vm.hactive, vm.vactive); drm_mode_debug_printmodeline(dmode); return 0; } EXPORT_SYMBOL_GPL(of_get_drm_display_mode); #endif /* CONFIG_OF */ #endif /* CONFIG_VIDEOMODE_HELPERS */ /** * drm_mode_set_name - set the name on a mode * @mode: name will be set in this mode * * Set the name of @mode to a standard format which is <hdisplay>x<vdisplay> * with an optional 'i' suffix for interlaced modes. */ void drm_mode_set_name(struct drm_display_mode *mode) { bool interlaced = !!(mode->flags & DRM_MODE_FLAG_INTERLACE); snprintf(mode->name, DRM_DISPLAY_MODE_LEN, "%dx%d%s", mode->hdisplay, mode->vdisplay, interlaced ? "i" : ""); } EXPORT_SYMBOL(drm_mode_set_name); /** * drm_mode_hsync - get the hsync of a mode * @mode: mode * * Returns: * @modes's hsync rate in kHz, rounded to the nearest integer. Calculates the * value first if it is not yet set. */ int drm_mode_hsync(const struct drm_display_mode *mode) { unsigned int calc_val; if (mode->hsync) return mode->hsync; if (mode->htotal <= 0) return 0; calc_val = (mode->clock * 1000) / mode->htotal; /* hsync in Hz */ calc_val += 500; /* round to 1000Hz */ calc_val /= 1000; /* truncate to kHz */ return calc_val; } EXPORT_SYMBOL(drm_mode_hsync); /** * drm_mode_vrefresh - get the vrefresh of a mode * @mode: mode * * Returns: * @modes's vrefresh rate in Hz, rounded to the nearest integer. Calculates the * value first if it is not yet set. */ int drm_mode_vrefresh(const struct drm_display_mode *mode) { int refresh = 0; if (mode->vrefresh > 0) refresh = mode->vrefresh; else if (mode->htotal > 0 && mode->vtotal > 0) { unsigned int num, den; num = mode->clock * 1000; den = mode->htotal * mode->vtotal; if (mode->flags & DRM_MODE_FLAG_INTERLACE) num *= 2; if (mode->flags & DRM_MODE_FLAG_DBLSCAN) den *= 2; if (mode->vscan > 1) den *= mode->vscan; refresh = DIV_ROUND_CLOSEST(num, den); } return refresh; } EXPORT_SYMBOL(drm_mode_vrefresh); /** * drm_mode_get_hv_timing - Fetches hdisplay/vdisplay for given mode * @mode: mode to query * @hdisplay: hdisplay value to fill in * @vdisplay: vdisplay value to fill in * * The vdisplay value will be doubled if the specified mode is a stereo mode of * the appropriate layout. */ void drm_mode_get_hv_timing(const struct drm_display_mode *mode, int *hdisplay, int *vdisplay) { struct drm_display_mode adjusted = *mode; drm_mode_set_crtcinfo(&adjusted, CRTC_STEREO_DOUBLE_ONLY); *hdisplay = adjusted.crtc_hdisplay; *vdisplay = adjusted.crtc_vdisplay; } EXPORT_SYMBOL(drm_mode_get_hv_timing); /** * drm_mode_set_crtcinfo - set CRTC modesetting timing parameters * @p: mode * @adjust_flags: a combination of adjustment flags * * Setup the CRTC modesetting timing parameters for @p, adjusting if necessary. * * - The CRTC_INTERLACE_HALVE_V flag can be used to halve vertical timings of * interlaced modes. * - The CRTC_STEREO_DOUBLE flag can be used to compute the timings for * buffers containing two eyes (only adjust the timings when needed, eg. for * "frame packing" or "side by side full"). * - The CRTC_NO_DBLSCAN and CRTC_NO_VSCAN flags request that adjustment *not* * be performed for doublescan and vscan > 1 modes respectively. */ void drm_mode_set_crtcinfo(struct drm_display_mode *p, int adjust_flags) { if (!p) return; p->crtc_clock = p->clock; p->crtc_hdisplay = p->hdisplay; p->crtc_hsync_start = p->hsync_start; p->crtc_hsync_end = p->hsync_end; p->crtc_htotal = p->htotal; p->crtc_hskew = p->hskew; p->crtc_vdisplay = p->vdisplay; p->crtc_vsync_start = p->vsync_start; p->crtc_vsync_end = p->vsync_end; p->crtc_vtotal = p->vtotal; if (p->flags & DRM_MODE_FLAG_INTERLACE) { if (adjust_flags & CRTC_INTERLACE_HALVE_V) { p->crtc_vdisplay /= 2; p->crtc_vsync_start /= 2; p->crtc_vsync_end /= 2; p->crtc_vtotal /= 2; } } if (!(adjust_flags & CRTC_NO_DBLSCAN)) { if (p->flags & DRM_MODE_FLAG_DBLSCAN) { p->crtc_vdisplay *= 2; p->crtc_vsync_start *= 2; p->crtc_vsync_end *= 2; p->crtc_vtotal *= 2; } } if (!(adjust_flags & CRTC_NO_VSCAN)) { if (p->vscan > 1) { p->crtc_vdisplay *= p->vscan; p->crtc_vsync_start *= p->vscan; p->crtc_vsync_end *= p->vscan; p->crtc_vtotal *= p->vscan; } } if (adjust_flags & CRTC_STEREO_DOUBLE) { unsigned int layout = p->flags & DRM_MODE_FLAG_3D_MASK; switch (layout) { case DRM_MODE_FLAG_3D_FRAME_PACKING: p->crtc_clock *= 2; p->crtc_vdisplay += p->crtc_vtotal; p->crtc_vsync_start += p->crtc_vtotal; p->crtc_vsync_end += p->crtc_vtotal; p->crtc_vtotal += p->crtc_vtotal; break; } } p->crtc_vblank_start = min(p->crtc_vsync_start, p->crtc_vdisplay); p->crtc_vblank_end = max(p->crtc_vsync_end, p->crtc_vtotal); p->crtc_hblank_start = min(p->crtc_hsync_start, p->crtc_hdisplay); p->crtc_hblank_end = max(p->crtc_hsync_end, p->crtc_htotal); } EXPORT_SYMBOL(drm_mode_set_crtcinfo); /** * drm_mode_copy - copy the mode * @dst: mode to overwrite * @src: mode to copy * * Copy an existing mode into another mode, preserving the object id and * list head of the destination mode. */ void drm_mode_copy(struct drm_display_mode *dst, const struct drm_display_mode *src) { struct list_head head = dst->head; *dst = *src; dst->head = head; } EXPORT_SYMBOL(drm_mode_copy); /** * drm_mode_duplicate - allocate and duplicate an existing mode * @dev: drm_device to allocate the duplicated mode for * @mode: mode to duplicate * * Just allocate a new mode, copy the existing mode into it, and return * a pointer to it. Used to create new instances of established modes. * * Returns: * Pointer to duplicated mode on success, NULL on error. */ struct drm_display_mode *drm_mode_duplicate(struct drm_device *dev, const struct drm_display_mode *mode) { struct drm_display_mode *nmode; nmode = drm_mode_create(dev); if (!nmode) return NULL; drm_mode_copy(nmode, mode); return nmode; } EXPORT_SYMBOL(drm_mode_duplicate); static bool drm_mode_match_timings(const struct drm_display_mode *mode1, const struct drm_display_mode *mode2) { return mode1->hdisplay == mode2->hdisplay && mode1->hsync_start == mode2->hsync_start && mode1->hsync_end == mode2->hsync_end && mode1->htotal == mode2->htotal && mode1->hskew == mode2->hskew && mode1->vdisplay == mode2->vdisplay && mode1->vsync_start == mode2->vsync_start && mode1->vsync_end == mode2->vsync_end && mode1->vtotal == mode2->vtotal && mode1->vscan == mode2->vscan; } static bool drm_mode_match_clock(const struct drm_display_mode *mode1, const struct drm_display_mode *mode2) { /* * do clock check convert to PICOS * so fb modes get matched the same */ if (mode1->clock && mode2->clock) return KHZ2PICOS(mode1->clock) == KHZ2PICOS(mode2->clock); else return mode1->clock == mode2->clock; } static bool drm_mode_match_flags(const struct drm_display_mode *mode1, const struct drm_display_mode *mode2) { return (mode1->flags & ~DRM_MODE_FLAG_3D_MASK) == (mode2->flags & ~DRM_MODE_FLAG_3D_MASK); } static bool drm_mode_match_3d_flags(const struct drm_display_mode *mode1, const struct drm_display_mode *mode2) { return (mode1->flags & DRM_MODE_FLAG_3D_MASK) == (mode2->flags & DRM_MODE_FLAG_3D_MASK); } static bool drm_mode_match_aspect_ratio(const struct drm_display_mode *mode1, const struct drm_display_mode *mode2) { return mode1->picture_aspect_ratio == mode2->picture_aspect_ratio; } /** * drm_mode_match - test modes for (partial) equality * @mode1: first mode * @mode2: second mode * @match_flags: which parts need to match (DRM_MODE_MATCH_*) * * Check to see if @mode1 and @mode2 are equivalent. * * Returns: * True if the modes are (partially) equal, false otherwise. */ bool drm_mode_match(const struct drm_display_mode *mode1, const struct drm_display_mode *mode2, unsigned int match_flags) { if (!mode1 && !mode2) return true; if (!mode1 || !mode2) return false; if (match_flags & DRM_MODE_MATCH_TIMINGS && !drm_mode_match_timings(mode1, mode2)) return false; if (match_flags & DRM_MODE_MATCH_CLOCK && !drm_mode_match_clock(mode1, mode2)) return false; if (match_flags & DRM_MODE_MATCH_FLAGS && !drm_mode_match_flags(mode1, mode2)) return false; if (match_flags & DRM_MODE_MATCH_3D_FLAGS && !drm_mode_match_3d_flags(mode1, mode2)) return false; if (match_flags & DRM_MODE_MATCH_ASPECT_RATIO && !drm_mode_match_aspect_ratio(mode1, mode2)) return false; return true; } EXPORT_SYMBOL(drm_mode_match); /** * drm_mode_equal - test modes for equality * @mode1: first mode * @mode2: second mode * * Check to see if @mode1 and @mode2 are equivalent. * * Returns: * True if the modes are equal, false otherwise. */ bool drm_mode_equal(const struct drm_display_mode *mode1, const struct drm_display_mode *mode2) { return drm_mode_match(mode1, mode2, DRM_MODE_MATCH_TIMINGS | DRM_MODE_MATCH_CLOCK | DRM_MODE_MATCH_FLAGS | DRM_MODE_MATCH_3D_FLAGS| DRM_MODE_MATCH_ASPECT_RATIO); } EXPORT_SYMBOL(drm_mode_equal); /** * drm_mode_equal_no_clocks - test modes for equality * @mode1: first mode * @mode2: second mode * * Check to see if @mode1 and @mode2 are equivalent, but * don't check the pixel clocks. * * Returns: * True if the modes are equal, false otherwise. */ bool drm_mode_equal_no_clocks(const struct drm_display_mode *mode1, const struct drm_display_mode *mode2) { return drm_mode_match(mode1, mode2, DRM_MODE_MATCH_TIMINGS | DRM_MODE_MATCH_FLAGS | DRM_MODE_MATCH_3D_FLAGS); } EXPORT_SYMBOL(drm_mode_equal_no_clocks); /** * drm_mode_equal_no_clocks_no_stereo - test modes for equality * @mode1: first mode * @mode2: second mode * * Check to see if @mode1 and @mode2 are equivalent, but * don't check the pixel clocks nor the stereo layout. * * Returns: * True if the modes are equal, false otherwise. */ bool drm_mode_equal_no_clocks_no_stereo(const struct drm_display_mode *mode1, const struct drm_display_mode *mode2) { return drm_mode_match(mode1, mode2, DRM_MODE_MATCH_TIMINGS | DRM_MODE_MATCH_FLAGS); } EXPORT_SYMBOL(drm_mode_equal_no_clocks_no_stereo); static enum drm_mode_status drm_mode_validate_basic(const struct drm_display_mode *mode) { if (mode->type & ~DRM_MODE_TYPE_ALL) return MODE_BAD; if (mode->flags & ~DRM_MODE_FLAG_ALL) return MODE_BAD; if ((mode->flags & DRM_MODE_FLAG_3D_MASK) > DRM_MODE_FLAG_3D_MAX) return MODE_BAD; if (mode->clock == 0) return MODE_CLOCK_LOW; if (mode->hdisplay == 0 || mode->hsync_start < mode->hdisplay || mode->hsync_end < mode->hsync_start || mode->htotal < mode->hsync_end) return MODE_H_ILLEGAL; if (mode->vdisplay == 0 || mode->vsync_start < mode->vdisplay || mode->vsync_end < mode->vsync_start || mode->vtotal < mode->vsync_end) return MODE_V_ILLEGAL; return MODE_OK; } /** * drm_mode_validate_driver - make sure the mode is somewhat sane * @dev: drm device * @mode: mode to check * * First do basic validation on the mode, and then allow the driver * to check for device/driver specific limitations via the optional * &drm_mode_config_helper_funcs.mode_valid hook. * * Returns: * The mode status */ enum drm_mode_status drm_mode_validate_driver(struct drm_device *dev, const struct drm_display_mode *mode) { enum drm_mode_status status; status = drm_mode_validate_basic(mode); if (status != MODE_OK) return status; if (dev->mode_config.funcs->mode_valid) return dev->mode_config.funcs->mode_valid(dev, mode); else return MODE_OK; } EXPORT_SYMBOL(drm_mode_validate_driver); /** * drm_mode_validate_size - make sure modes adhere to size constraints * @mode: mode to check * @maxX: maximum width * @maxY: maximum height * * This function is a helper which can be used to validate modes against size * limitations of the DRM device/connector. If a mode is too big its status * member is updated with the appropriate validation failure code. The list * itself is not changed. * * Returns: * The mode status */ enum drm_mode_status drm_mode_validate_size(const struct drm_display_mode *mode, int maxX, int maxY) { if (maxX > 0 && mode->hdisplay > maxX) return MODE_VIRTUAL_X; if (maxY > 0 && mode->vdisplay > maxY) return MODE_VIRTUAL_Y; return MODE_OK; } EXPORT_SYMBOL(drm_mode_validate_size); /** * drm_mode_validate_ycbcr420 - add 'ycbcr420-only' modes only when allowed * @mode: mode to check * @connector: drm connector under action * * This function is a helper which can be used to filter out any YCBCR420 * only mode, when the source doesn't support it. * * Returns: * The mode status */ enum drm_mode_status drm_mode_validate_ycbcr420(const struct drm_display_mode *mode, struct drm_connector *connector) { u8 vic = drm_match_cea_mode(mode); enum drm_mode_status status = MODE_OK; struct drm_hdmi_info *hdmi = &connector->display_info.hdmi; if (test_bit(vic, hdmi->y420_vdb_modes)) { if (!connector->ycbcr_420_allowed) status = MODE_NO_420; } return status; } EXPORT_SYMBOL(drm_mode_validate_ycbcr420); #define MODE_STATUS(status) [MODE_ ## status + 3] = #status static const char * const drm_mode_status_names[] = { MODE_STATUS(OK), MODE_STATUS(HSYNC), MODE_STATUS(VSYNC), MODE_STATUS(H_ILLEGAL), MODE_STATUS(V_ILLEGAL), MODE_STATUS(BAD_WIDTH), MODE_STATUS(NOMODE), MODE_STATUS(NO_INTERLACE), MODE_STATUS(NO_DBLESCAN), MODE_STATUS(NO_VSCAN), MODE_STATUS(MEM), MODE_STATUS(VIRTUAL_X), MODE_STATUS(VIRTUAL_Y), MODE_STATUS(MEM_VIRT), MODE_STATUS(NOCLOCK), MODE_STATUS(CLOCK_HIGH), MODE_STATUS(CLOCK_LOW), MODE_STATUS(CLOCK_RANGE), MODE_STATUS(BAD_HVALUE), MODE_STATUS(BAD_VVALUE), MODE_STATUS(BAD_VSCAN), MODE_STATUS(HSYNC_NARROW), MODE_STATUS(HSYNC_WIDE), MODE_STATUS(HBLANK_NARROW), MODE_STATUS(HBLANK_WIDE), MODE_STATUS(VSYNC_NARROW), MODE_STATUS(VSYNC_WIDE), MODE_STATUS(VBLANK_NARROW), MODE_STATUS(VBLANK_WIDE), MODE_STATUS(PANEL), MODE_STATUS(INTERLACE_WIDTH), MODE_STATUS(ONE_WIDTH), MODE_STATUS(ONE_HEIGHT), MODE_STATUS(ONE_SIZE), MODE_STATUS(NO_REDUCED), MODE_STATUS(NO_STEREO), MODE_STATUS(NO_420), MODE_STATUS(STALE), MODE_STATUS(BAD), MODE_STATUS(ERROR), }; #undef MODE_STATUS const char *drm_get_mode_status_name(enum drm_mode_status status) { int index = status + 3; if (WARN_ON(index < 0 || index >= ARRAY_SIZE(drm_mode_status_names))) return ""; return drm_mode_status_names[index]; } /** * drm_mode_prune_invalid - remove invalid modes from mode list * @dev: DRM device * @mode_list: list of modes to check * @verbose: be verbose about it * * This helper function can be used to prune a display mode list after * validation has been completed. All modes whose status is not MODE_OK will be * removed from the list, and if @verbose the status code and mode name is also * printed to dmesg. */ void drm_mode_prune_invalid(struct drm_device *dev, struct list_head *mode_list, bool verbose) { struct drm_display_mode *mode, *t; list_for_each_entry_safe(mode, t, mode_list, head) { if (mode->status != MODE_OK) { list_del(&mode->head); if (verbose) { drm_mode_debug_printmodeline(mode); DRM_DEBUG_KMS("Not using %s mode: %s\n", mode->name, drm_get_mode_status_name(mode->status)); } drm_mode_destroy(dev, mode); } } } EXPORT_SYMBOL(drm_mode_prune_invalid); /** * drm_mode_compare - compare modes for favorability * @priv: unused * @lh_a: list_head for first mode * @lh_b: list_head for second mode * * Compare two modes, given by @lh_a and @lh_b, returning a value indicating * which is better. * * Returns: * Negative if @lh_a is better than @lh_b, zero if they're equivalent, or * positive if @lh_b is better than @lh_a. */ static int drm_mode_compare(void *priv, struct list_head *lh_a, struct list_head *lh_b) { struct drm_display_mode *a = list_entry(lh_a, struct drm_display_mode, head); struct drm_display_mode *b = list_entry(lh_b, struct drm_display_mode, head); int diff; diff = ((b->type & DRM_MODE_TYPE_PREFERRED) != 0) - ((a->type & DRM_MODE_TYPE_PREFERRED) != 0); if (diff) return diff; diff = b->hdisplay * b->vdisplay - a->hdisplay * a->vdisplay; if (diff) return diff; diff = b->vrefresh - a->vrefresh; if (diff) return diff; diff = b->clock - a->clock; return diff; } /** * drm_mode_sort - sort mode list * @mode_list: list of drm_display_mode structures to sort * * Sort @mode_list by favorability, moving good modes to the head of the list. */ void drm_mode_sort(struct list_head *mode_list) { list_sort(NULL, mode_list, drm_mode_compare); } EXPORT_SYMBOL(drm_mode_sort); /** * drm_connector_list_update - update the mode list for the connector * @connector: the connector to update * * This moves the modes from the @connector probed_modes list * to the actual mode list. It compares the probed mode against the current * list and only adds different/new modes. * * This is just a helper functions doesn't validate any modes itself and also * doesn't prune any invalid modes. Callers need to do that themselves. */ void drm_connector_list_update(struct drm_connector *connector) { struct drm_display_mode *pmode, *pt; WARN_ON(!mutex_is_locked(&connector->dev->mode_config.mutex)); list_for_each_entry_safe(pmode, pt, &connector->probed_modes, head) { struct drm_display_mode *mode; bool found_it = false; /* go through current modes checking for the new probed mode */ list_for_each_entry(mode, &connector->modes, head) { if (!drm_mode_equal(pmode, mode)) continue; found_it = true; /* * If the old matching mode is stale (ie. left over * from a previous probe) just replace it outright. * Otherwise just merge the type bits between all * equal probed modes. * * If two probed modes are considered equal, pick the * actual timings from the one that's marked as * preferred (in case the match isn't 100%). If * multiple or zero preferred modes are present, favor * the mode added to the probed_modes list first. */ if (mode->status == MODE_STALE) { drm_mode_copy(mode, pmode); } else if ((mode->type & DRM_MODE_TYPE_PREFERRED) == 0 && (pmode->type & DRM_MODE_TYPE_PREFERRED) != 0) { pmode->type |= mode->type; drm_mode_copy(mode, pmode); } else { mode->type |= pmode->type; } list_del(&pmode->head); drm_mode_destroy(connector->dev, pmode); break; } if (!found_it) { list_move_tail(&pmode->head, &connector->modes); } } } EXPORT_SYMBOL(drm_connector_list_update); /** * drm_mode_parse_command_line_for_connector - parse command line modeline for connector * @mode_option: optional per connector mode option * @connector: connector to parse modeline for * @mode: preallocated drm_cmdline_mode structure to fill out * * This parses @mode_option command line modeline for modes and options to * configure the connector. If @mode_option is NULL the default command line * modeline in fb_mode_option will be parsed instead. * * This uses the same parameters as the fb modedb.c, except for an extra * force-enable, force-enable-digital and force-disable bit at the end:: * * <xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m][eDd] * * The intermediate drm_cmdline_mode structure is required to store additional * options from the command line modline like the force-enable/disable flag. * * Returns: * True if a valid modeline has been parsed, false otherwise. */ bool drm_mode_parse_command_line_for_connector(const char *mode_option, struct drm_connector *connector, struct drm_cmdline_mode *mode) { const char *name; unsigned int namelen; bool res_specified = false, bpp_specified = false, refresh_specified = false; unsigned int xres = 0, yres = 0, bpp = 32, refresh = 0; bool yres_specified = false, cvt = false, rb = false; bool interlace = false, margins = false, was_digit = false; int i; enum drm_connector_force force = DRM_FORCE_UNSPECIFIED; #ifdef CONFIG_FB if (!mode_option) mode_option = fb_mode_option; #endif if (!mode_option) { mode->specified = false; return false; } name = mode_option; namelen = strlen(name); for (i = namelen-1; i >= 0; i--) { switch (name[i]) { case '@': if (!refresh_specified && !bpp_specified && !yres_specified && !cvt && !rb && was_digit) { refresh = simple_strtol(&name[i+1], NULL, 10); refresh_specified = true; was_digit = false; } else goto done; break; case '-': if (!bpp_specified && !yres_specified && !cvt && !rb && was_digit) { bpp = simple_strtol(&name[i+1], NULL, 10); bpp_specified = true; was_digit = false; } else goto done; break; case 'x': if (!yres_specified && was_digit) { yres = simple_strtol(&name[i+1], NULL, 10); yres_specified = true; was_digit = false; } else goto done; break; case '0' ... '9': was_digit = true; break; case 'M': if (yres_specified || cvt || was_digit) goto done; cvt = true; break; case 'R': if (yres_specified || cvt || rb || was_digit) goto done; rb = true; break; case 'm': if (cvt || yres_specified || was_digit) goto done; margins = true; break; case 'i': if (cvt || yres_specified || was_digit) goto done; interlace = true; break; case 'e': if (yres_specified || bpp_specified || refresh_specified || was_digit || (force != DRM_FORCE_UNSPECIFIED)) goto done; force = DRM_FORCE_ON; break; case 'D': if (yres_specified || bpp_specified || refresh_specified || was_digit || (force != DRM_FORCE_UNSPECIFIED)) goto done; if ((connector->connector_type != DRM_MODE_CONNECTOR_DVII) && (connector->connector_type != DRM_MODE_CONNECTOR_HDMIB)) force = DRM_FORCE_ON; else force = DRM_FORCE_ON_DIGITAL; break; case 'd': if (yres_specified || bpp_specified || refresh_specified || was_digit || (force != DRM_FORCE_UNSPECIFIED)) goto done; force = DRM_FORCE_OFF; break; default: goto done; } } if (i < 0 && yres_specified) { char *ch; xres = simple_strtol(name, &ch, 10); if ((ch != NULL) && (*ch == 'x')) res_specified = true; else i = ch - name; } else if (!yres_specified && was_digit) { /* catch mode that begins with digits but has no 'x' */ i = 0; } done: if (i >= 0) { pr_warn("[drm] parse error at position %i in video mode '%s'\n", i, name); mode->specified = false; return false; } if (res_specified) { mode->specified = true; mode->xres = xres; mode->yres = yres; } if (refresh_specified) { mode->refresh_specified = true; mode->refresh = refresh; } if (bpp_specified) { mode->bpp_specified = true; mode->bpp = bpp; } mode->rb = rb; mode->cvt = cvt; mode->interlace = interlace; mode->margins = margins; mode->force = force; return true; } EXPORT_SYMBOL(drm_mode_parse_command_line_for_connector); /** * drm_mode_create_from_cmdline_mode - convert a command line modeline into a DRM display mode * @dev: DRM device to create the new mode for * @cmd: input command line modeline * * Returns: * Pointer to converted mode on success, NULL on error. */ struct drm_display_mode * drm_mode_create_from_cmdline_mode(struct drm_device *dev, struct drm_cmdline_mode *cmd) { struct drm_display_mode *mode; if (cmd->cvt) mode = drm_cvt_mode(dev, cmd->xres, cmd->yres, cmd->refresh_specified ? cmd->refresh : 60, cmd->rb, cmd->interlace, cmd->margins); else mode = drm_gtf_mode(dev, cmd->xres, cmd->yres, cmd->refresh_specified ? cmd->refresh : 60, cmd->interlace, cmd->margins); if (!mode) return NULL; mode->type |= DRM_MODE_TYPE_USERDEF; /* fix up 1368x768: GFT/CVT can't express 1366 width due to alignment */ if (cmd->xres == 1366) drm_mode_fixup_1366x768(mode); drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V); return mode; } EXPORT_SYMBOL(drm_mode_create_from_cmdline_mode); /** * drm_crtc_convert_to_umode - convert a drm_display_mode into a modeinfo * @out: drm_mode_modeinfo struct to return to the user * @in: drm_display_mode to use * * Convert a drm_display_mode into a drm_mode_modeinfo structure to return to * the user. */ void drm_mode_convert_to_umode(struct drm_mode_modeinfo *out, const struct drm_display_mode *in) { WARN(in->hdisplay > USHRT_MAX || in->hsync_start > USHRT_MAX || in->hsync_end > USHRT_MAX || in->htotal > USHRT_MAX || in->hskew > USHRT_MAX || in->vdisplay > USHRT_MAX || in->vsync_start > USHRT_MAX || in->vsync_end > USHRT_MAX || in->vtotal > USHRT_MAX || in->vscan > USHRT_MAX, "timing values too large for mode info\n"); out->clock = in->clock; out->hdisplay = in->hdisplay; out->hsync_start = in->hsync_start; out->hsync_end = in->hsync_end; out->htotal = in->htotal; out->hskew = in->hskew; out->vdisplay = in->vdisplay; out->vsync_start = in->vsync_start; out->vsync_end = in->vsync_end; out->vtotal = in->vtotal; out->vscan = in->vscan; out->vrefresh = in->vrefresh; out->flags = in->flags; out->type = in->type; switch (in->picture_aspect_ratio) { case HDMI_PICTURE_ASPECT_4_3: out->flags |= DRM_MODE_FLAG_PIC_AR_4_3; break; case HDMI_PICTURE_ASPECT_16_9: out->flags |= DRM_MODE_FLAG_PIC_AR_16_9; break; case HDMI_PICTURE_ASPECT_64_27: out->flags |= DRM_MODE_FLAG_PIC_AR_64_27; break; case HDMI_PICTURE_ASPECT_256_135: out->flags |= DRM_MODE_FLAG_PIC_AR_256_135; break; case HDMI_PICTURE_ASPECT_RESERVED: default: out->flags |= DRM_MODE_FLAG_PIC_AR_NONE; break; } strncpy(out->name, in->name, DRM_DISPLAY_MODE_LEN); out->name[DRM_DISPLAY_MODE_LEN-1] = 0; } /** * drm_crtc_convert_umode - convert a modeinfo into a drm_display_mode * @dev: drm device * @out: drm_display_mode to return to the user * @in: drm_mode_modeinfo to use * * Convert a drm_mode_modeinfo into a drm_display_mode structure to return to * the caller. * * Returns: * Zero on success, negative errno on failure. */ int drm_mode_convert_umode(struct drm_device *dev, struct drm_display_mode *out, const struct drm_mode_modeinfo *in) { if (in->clock > INT_MAX || in->vrefresh > INT_MAX) return -ERANGE; out->clock = in->clock; out->hdisplay = in->hdisplay; out->hsync_start = in->hsync_start; out->hsync_end = in->hsync_end; out->htotal = in->htotal; out->hskew = in->hskew; out->vdisplay = in->vdisplay; out->vsync_start = in->vsync_start; out->vsync_end = in->vsync_end; out->vtotal = in->vtotal; out->vscan = in->vscan; out->vrefresh = in->vrefresh; out->flags = in->flags; /* * Old xf86-video-vmware (possibly others too) used to * leave 'type' unititialized. Just ignore any bits we * don't like. It's a just hint after all, and more * useful for the kernel->userspace direction anyway. */ out->type = in->type & DRM_MODE_TYPE_ALL; strncpy(out->name, in->name, DRM_DISPLAY_MODE_LEN); out->name[DRM_DISPLAY_MODE_LEN-1] = 0; /* Clearing picture aspect ratio bits from out flags, * as the aspect-ratio information is not stored in * flags for kernel-mode, but in picture_aspect_ratio. */ out->flags &= ~DRM_MODE_FLAG_PIC_AR_MASK; switch (in->flags & DRM_MODE_FLAG_PIC_AR_MASK) { case DRM_MODE_FLAG_PIC_AR_4_3: out->picture_aspect_ratio |= HDMI_PICTURE_ASPECT_4_3; break; case DRM_MODE_FLAG_PIC_AR_16_9: out->picture_aspect_ratio |= HDMI_PICTURE_ASPECT_16_9; break; case DRM_MODE_FLAG_PIC_AR_64_27: out->picture_aspect_ratio |= HDMI_PICTURE_ASPECT_64_27; break; case DRM_MODE_FLAG_PIC_AR_256_135: out->picture_aspect_ratio |= HDMI_PICTURE_ASPECT_256_135; break; default: out->picture_aspect_ratio = HDMI_PICTURE_ASPECT_NONE; break; } out->status = drm_mode_validate_driver(dev, out); if (out->status != MODE_OK) return -EINVAL; drm_mode_set_crtcinfo(out, CRTC_INTERLACE_HALVE_V); return 0; } /** * drm_mode_is_420_only - if a given videomode can be only supported in YCBCR420 * output format * * @display: display under action * @mode: video mode to be tested. * * Returns: * true if the mode can be supported in YCBCR420 format * false if not. */ bool drm_mode_is_420_only(const struct drm_display_info *display, const struct drm_display_mode *mode) { u8 vic = drm_match_cea_mode(mode); return test_bit(vic, display->hdmi.y420_vdb_modes); } EXPORT_SYMBOL(drm_mode_is_420_only); /** * drm_mode_is_420_also - if a given videomode can be supported in YCBCR420 * output format also (along with RGB/YCBCR444/422) * * @display: display under action. * @mode: video mode to be tested. * * Returns: * true if the mode can be support YCBCR420 format * false if not. */ bool drm_mode_is_420_also(const struct drm_display_info *display, const struct drm_display_mode *mode) { u8 vic = drm_match_cea_mode(mode); return test_bit(vic, display->hdmi.y420_cmdb_modes); } EXPORT_SYMBOL(drm_mode_is_420_also); /** * drm_mode_is_420 - if a given videomode can be supported in YCBCR420 * output format * * @display: display under action. * @mode: video mode to be tested. * * Returns: * true if the mode can be supported in YCBCR420 format * false if not. */ bool drm_mode_is_420(const struct drm_display_info *display, const struct drm_display_mode *mode) { return drm_mode_is_420_only(display, mode) || drm_mode_is_420_also(display, mode); } EXPORT_SYMBOL(drm_mode_is_420);