/*
 * OMAP4 Clock init
 *
 * Copyright (C) 2013 Texas Instruments, Inc.
 *
 * Tero Kristo (t-kristo@ti.com)
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/clk/ti.h>

#include "clock.h"

/*
 * OMAP4 ABE DPLL default frequency. In OMAP4460 TRM version V, section
 * "3.6.3.2.3 CM1_ABE Clock Generator" states that the "DPLL_ABE_X2_CLK
 * must be set to 196.608 MHz" and hence, the DPLL locked frequency is
 * half of this value.
 */
#define OMAP4_DPLL_ABE_DEFFREQ				98304000

/*
 * OMAP4 USB DPLL default frequency. In OMAP4430 TRM version V, section
 * "3.6.3.9.5 DPLL_USB Preferred Settings" shows that the preferred
 * locked frequency for the USB DPLL is 960MHz.
 */
#define OMAP4_DPLL_USB_DEFFREQ				960000000

static struct ti_dt_clk omap44xx_clks[] = {
	DT_CLK("smp_twd", NULL, "mpu_periphclk"),
	DT_CLK("omapdss_dss", "ick", "dss_fck"),
	DT_CLK("usbhs_omap", "fs_fck", "usb_host_fs_fck"),
	DT_CLK("usbhs_omap", "hs_fck", "usb_host_hs_fck"),
	DT_CLK("musb-omap2430", "ick", "usb_otg_hs_ick"),
	DT_CLK("usbhs_omap", "usbtll_ick", "usb_tll_hs_ick"),
	DT_CLK("usbhs_tll", "usbtll_ick", "usb_tll_hs_ick"),
	DT_CLK("omap_i2c.1", "ick", "dummy_ck"),
	DT_CLK("omap_i2c.2", "ick", "dummy_ck"),
	DT_CLK("omap_i2c.3", "ick", "dummy_ck"),
	DT_CLK("omap_i2c.4", "ick", "dummy_ck"),
	DT_CLK(NULL, "mailboxes_ick", "dummy_ck"),
	DT_CLK("omap_hsmmc.0", "ick", "dummy_ck"),
	DT_CLK("omap_hsmmc.1", "ick", "dummy_ck"),
	DT_CLK("omap_hsmmc.2", "ick", "dummy_ck"),
	DT_CLK("omap_hsmmc.3", "ick", "dummy_ck"),
	DT_CLK("omap_hsmmc.4", "ick", "dummy_ck"),
	DT_CLK("omap-mcbsp.1", "ick", "dummy_ck"),
	DT_CLK("omap-mcbsp.2", "ick", "dummy_ck"),
	DT_CLK("omap-mcbsp.3", "ick", "dummy_ck"),
	DT_CLK("omap-mcbsp.4", "ick", "dummy_ck"),
	DT_CLK("omap2_mcspi.1", "ick", "dummy_ck"),
	DT_CLK("omap2_mcspi.2", "ick", "dummy_ck"),
	DT_CLK("omap2_mcspi.3", "ick", "dummy_ck"),
	DT_CLK("omap2_mcspi.4", "ick", "dummy_ck"),
	DT_CLK(NULL, "uart1_ick", "dummy_ck"),
	DT_CLK(NULL, "uart2_ick", "dummy_ck"),
	DT_CLK(NULL, "uart3_ick", "dummy_ck"),
	DT_CLK(NULL, "uart4_ick", "dummy_ck"),
	DT_CLK("usbhs_omap", "usbhost_ick", "dummy_ck"),
	DT_CLK("usbhs_omap", "usbtll_fck", "dummy_ck"),
	DT_CLK("usbhs_tll", "usbtll_fck", "dummy_ck"),
	DT_CLK("omap_wdt", "ick", "dummy_ck"),
	DT_CLK(NULL, "timer_32k_ck", "sys_32k_ck"),
	DT_CLK("4a318000.timer", "timer_sys_ck", "sys_clkin_ck"),
	DT_CLK("48032000.timer", "timer_sys_ck", "sys_clkin_ck"),
	DT_CLK("48034000.timer", "timer_sys_ck", "sys_clkin_ck"),
	DT_CLK("48036000.timer", "timer_sys_ck", "sys_clkin_ck"),
	DT_CLK("4803e000.timer", "timer_sys_ck", "sys_clkin_ck"),
	DT_CLK("48086000.timer", "timer_sys_ck", "sys_clkin_ck"),
	DT_CLK("48088000.timer", "timer_sys_ck", "sys_clkin_ck"),
	DT_CLK("40138000.timer", "timer_sys_ck", "syc_clk_div_ck"),
	DT_CLK("4013a000.timer", "timer_sys_ck", "syc_clk_div_ck"),
	DT_CLK("4013c000.timer", "timer_sys_ck", "syc_clk_div_ck"),
	DT_CLK("4013e000.timer", "timer_sys_ck", "syc_clk_div_ck"),
	DT_CLK(NULL, "cpufreq_ck", "dpll_mpu_ck"),
	{ .node_name = NULL },
};

int __init omap4xxx_dt_clk_init(void)
{
	int rc;
	struct clk *abe_dpll_ref, *abe_dpll, *sys_32k_ck, *usb_dpll;

	ti_dt_clocks_register(omap44xx_clks);

	omap2_clk_disable_autoidle_all();

	ti_clk_add_aliases();

	/*
	 * Lock USB DPLL on OMAP4 devices so that the L3INIT power
	 * domain can transition to retention state when not in use.
	 */
	usb_dpll = clk_get_sys(NULL, "dpll_usb_ck");
	rc = clk_set_rate(usb_dpll, OMAP4_DPLL_USB_DEFFREQ);
	if (rc)
		pr_err("%s: failed to configure USB DPLL!\n", __func__);

	/*
	 * On OMAP4460 the ABE DPLL fails to turn on if in idle low-power
	 * state when turning the ABE clock domain. Workaround this by
	 * locking the ABE DPLL on boot.
	 * Lock the ABE DPLL in any case to avoid issues with audio.
	 */
	abe_dpll_ref = clk_get_sys(NULL, "abe_dpll_refclk_mux_ck");
	sys_32k_ck = clk_get_sys(NULL, "sys_32k_ck");
	rc = clk_set_parent(abe_dpll_ref, sys_32k_ck);
	abe_dpll = clk_get_sys(NULL, "dpll_abe_ck");
	if (!rc)
		rc = clk_set_rate(abe_dpll, OMAP4_DPLL_ABE_DEFFREQ);
	if (rc)
		pr_err("%s: failed to configure ABE DPLL!\n", __func__);

	return 0;
}