/* * arch/arm/mach-at91/pm_slow_clock.S * * Copyright (C) 2006 Savin Zlobec * * AT91SAM9 support: * Copyright (C) 2007 Anti Sullin #include #include #include #include "pm.h" #define SRAMC_SELF_FRESH_ACTIVE 0x01 #define SRAMC_SELF_FRESH_EXIT 0x00 pmc .req r0 tmp1 .req r4 tmp2 .req r5 /* * Wait until master clock is ready (after switching master clock source) */ .macro wait_mckrdy 1: ldr tmp1, [pmc, #AT91_PMC_SR] tst tmp1, #AT91_PMC_MCKRDY beq 1b .endm /* * Wait until master oscillator has stabilized. */ .macro wait_moscrdy 1: ldr tmp1, [pmc, #AT91_PMC_SR] tst tmp1, #AT91_PMC_MOSCS beq 1b .endm /* * Wait until PLLA has locked. */ .macro wait_pllalock 1: ldr tmp1, [pmc, #AT91_PMC_SR] tst tmp1, #AT91_PMC_LOCKA beq 1b .endm .text .arm /* * void at91_pm_suspend_in_sram(void __iomem *pmc, void __iomem *sdramc, * void __iomem *ramc1, int memctrl) * @input param: * @r0: base address of AT91_PMC * @r1: base address of SDRAM Controller (SDRAM, DDRSDR, or AT91_SYS) * @r2: base address of second SDRAM Controller or 0 if not present * @r3: pm information */ ENTRY(at91_pm_suspend_in_sram) /* Save registers on stack */ stmfd sp!, {r4 - r12, lr} /* Drain write buffer */ mov tmp1, #0 mcr p15, 0, tmp1, c7, c10, 4 str r0, .pmc_base str r1, .sramc_base str r2, .sramc1_base and r0, r3, #AT91_PM_MEMTYPE_MASK str r0, .memtype lsr r0, r3, #AT91_PM_MODE_OFFSET and r0, r0, #AT91_PM_MODE_MASK str r0, .pm_mode /* Active the self-refresh mode */ mov r0, #SRAMC_SELF_FRESH_ACTIVE bl at91_sramc_self_refresh ldr r0, .pm_mode tst r0, #AT91_PM_SLOW_CLOCK beq skip_disable_main_clock ldr pmc, .pmc_base /* Save Master clock setting */ ldr tmp1, [pmc, #AT91_PMC_MCKR] str tmp1, .saved_mckr /* * Set the Master clock source to slow clock */ bic tmp1, tmp1, #AT91_PMC_CSS str tmp1, [pmc, #AT91_PMC_MCKR] wait_mckrdy /* Save PLLA setting and disable it */ ldr tmp1, [pmc, #AT91_CKGR_PLLAR] str tmp1, .saved_pllar mov tmp1, #AT91_PMC_PLLCOUNT orr tmp1, tmp1, #(1 << 29) /* bit 29 always set */ str tmp1, [pmc, #AT91_CKGR_PLLAR] /* Turn off the main oscillator */ ldr tmp1, [pmc, #AT91_CKGR_MOR] bic tmp1, tmp1, #AT91_PMC_MOSCEN orr tmp1, tmp1, #AT91_PMC_KEY str tmp1, [pmc, #AT91_CKGR_MOR] skip_disable_main_clock: ldr pmc, .pmc_base /* Wait for interrupt */ mcr p15, 0, tmp1, c7, c0, 4 ldr r0, .pm_mode tst r0, #AT91_PM_SLOW_CLOCK beq skip_enable_main_clock ldr pmc, .pmc_base /* Turn on the main oscillator */ ldr tmp1, [pmc, #AT91_CKGR_MOR] orr tmp1, tmp1, #AT91_PMC_MOSCEN orr tmp1, tmp1, #AT91_PMC_KEY str tmp1, [pmc, #AT91_CKGR_MOR] wait_moscrdy /* Restore PLLA setting */ ldr tmp1, .saved_pllar str tmp1, [pmc, #AT91_CKGR_PLLAR] tst tmp1, #(AT91_PMC_MUL & 0xff0000) bne 3f tst tmp1, #(AT91_PMC_MUL & ~0xff0000) beq 4f 3: wait_pllalock 4: /* * Restore master clock setting */ ldr tmp1, .saved_mckr str tmp1, [pmc, #AT91_PMC_MCKR] wait_mckrdy skip_enable_main_clock: /* Exit the self-refresh mode */ mov r0, #SRAMC_SELF_FRESH_EXIT bl at91_sramc_self_refresh /* Restore registers, and return */ ldmfd sp!, {r4 - r12, pc} ENDPROC(at91_pm_suspend_in_sram) /* * void at91_sramc_self_refresh(unsigned int is_active) * * @input param: * @r0: 1 - active self-refresh mode * 0 - exit self-refresh mode * register usage: * @r1: memory type * @r2: base address of the sram controller */ ENTRY(at91_sramc_self_refresh) ldr r1, .memtype ldr r2, .sramc_base cmp r1, #AT91_MEMCTRL_MC bne ddrc_sf /* * at91rm9200 Memory controller */ /* * For exiting the self-refresh mode, do nothing, * automatically exit the self-refresh mode. */ tst r0, #SRAMC_SELF_FRESH_ACTIVE beq exit_sramc_sf /* Active SDRAM self-refresh mode */ mov r3, #1 str r3, [r2, #AT91RM9200_SDRAMC_SRR] b exit_sramc_sf ddrc_sf: cmp r1, #AT91_MEMCTRL_DDRSDR bne sdramc_sf /* * DDR Memory controller */ tst r0, #SRAMC_SELF_FRESH_ACTIVE beq ddrc_exit_sf /* LPDDR1 --> force DDR2 mode during self-refresh */ ldr r3, [r2, #AT91_DDRSDRC_MDR] str r3, .saved_sam9_mdr bic r3, r3, #~AT91_DDRSDRC_MD cmp r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR ldreq r3, [r2, #AT91_DDRSDRC_MDR] biceq r3, r3, #AT91_DDRSDRC_MD orreq r3, r3, #AT91_DDRSDRC_MD_DDR2 streq r3, [r2, #AT91_DDRSDRC_MDR] /* Active DDRC self-refresh mode */ ldr r3, [r2, #AT91_DDRSDRC_LPR] str r3, .saved_sam9_lpr bic r3, r3, #AT91_DDRSDRC_LPCB orr r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH str r3, [r2, #AT91_DDRSDRC_LPR] /* If using the 2nd ddr controller */ ldr r2, .sramc1_base cmp r2, #0 beq no_2nd_ddrc ldr r3, [r2, #AT91_DDRSDRC_MDR] str r3, .saved_sam9_mdr1 bic r3, r3, #~AT91_DDRSDRC_MD cmp r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR ldreq r3, [r2, #AT91_DDRSDRC_MDR] biceq r3, r3, #AT91_DDRSDRC_MD orreq r3, r3, #AT91_DDRSDRC_MD_DDR2 streq r3, [r2, #AT91_DDRSDRC_MDR] /* Active DDRC self-refresh mode */ ldr r3, [r2, #AT91_DDRSDRC_LPR] str r3, .saved_sam9_lpr1 bic r3, r3, #AT91_DDRSDRC_LPCB orr r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH str r3, [r2, #AT91_DDRSDRC_LPR] no_2nd_ddrc: b exit_sramc_sf ddrc_exit_sf: /* Restore MDR in case of LPDDR1 */ ldr r3, .saved_sam9_mdr str r3, [r2, #AT91_DDRSDRC_MDR] /* Restore LPR on AT91 with DDRAM */ ldr r3, .saved_sam9_lpr str r3, [r2, #AT91_DDRSDRC_LPR] /* If using the 2nd ddr controller */ ldr r2, .sramc1_base cmp r2, #0 ldrne r3, .saved_sam9_mdr1 strne r3, [r2, #AT91_DDRSDRC_MDR] ldrne r3, .saved_sam9_lpr1 strne r3, [r2, #AT91_DDRSDRC_LPR] b exit_sramc_sf /* * SDRAMC Memory controller */ sdramc_sf: tst r0, #SRAMC_SELF_FRESH_ACTIVE beq sdramc_exit_sf /* Active SDRAMC self-refresh mode */ ldr r3, [r2, #AT91_SDRAMC_LPR] str r3, .saved_sam9_lpr bic r3, r3, #AT91_SDRAMC_LPCB orr r3, r3, #AT91_SDRAMC_LPCB_SELF_REFRESH str r3, [r2, #AT91_SDRAMC_LPR] sdramc_exit_sf: ldr r3, .saved_sam9_lpr str r3, [r2, #AT91_SDRAMC_LPR] exit_sramc_sf: mov pc, lr ENDPROC(at91_sramc_self_refresh) .pmc_base: .word 0 .sramc_base: .word 0 .sramc1_base: .word 0 .memtype: .word 0 .pm_mode: .word 0 .saved_mckr: .word 0 .saved_pllar: .word 0 .saved_sam9_lpr: .word 0 .saved_sam9_lpr1: .word 0 .saved_sam9_mdr: .word 0 .saved_sam9_mdr1: .word 0 ENTRY(at91_pm_suspend_in_sram_sz) .word .-at91_pm_suspend_in_sram