/* * omap3-n950-n9.dtsi - Device Tree file for Nokia N950 & N9 (common stuff) * * Written by: Aaro Koskinen * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #include "omap36xx.dtsi" / { cpus { cpu@0 { cpu0-supply = <&vcc>; operating-points = < /* kHz uV */ 300000 1012500 600000 1200000 800000 1325000 1000000 1375000 >; }; }; memory@80000000 { device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; vemmc: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "VEMMC"; regulator-min-microvolt = <2900000>; regulator-max-microvolt = <2900000>; gpio = <&gpio5 29 GPIO_ACTIVE_HIGH>; /* gpio line 157 */ startup-delay-us = <150>; enable-active-high; }; vwlan_fixed: fixedregulator2 { compatible = "regulator-fixed"; regulator-name = "VWLAN"; gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>; /* gpio 35 */ enable-active-high; regulator-boot-off; }; leds { compatible = "gpio-leds"; heartbeat { label = "debug::sleep"; gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; /* gpio92 */ linux,default-trigger = "default-on"; pinctrl-names = "default"; pinctrl-0 = <&debug_leds>; }; }; /* controlled (enabled/disabled) directly by wl1271 */ vctcxo: vctcxo { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <38400000>; }; }; &omap3_pmx_core { accelerator_pins: pinmux_accelerator_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT | MUX_MODE4) /* mcspi2_somi.gpio_180 -> LIS302 INT1 */ OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT | MUX_MODE4) /* mcspi2_cs0.gpio_181 -> LIS302 INT2 */ >; }; debug_leds: pinmux_debug_led_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE4) /* dss_data22.gpio_92 */ >; }; mmc2_pins: pinmux_mmc2_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */ >; }; wlan_pins: pinmux_wlan_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE4) /* gpio 35 - wlan enable */ OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4) /* gpio 42 - wlan irq */ >; }; ssi_pins: pinmux_ssi_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */ OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */ OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */ OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */ OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */ OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */ OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */ OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE1) /* ssi1_wake */ >; }; ssi_pins_idle: pinmux_ssi_pins_idle { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE7) /* ssi1_dat_tx */ OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE7) /* ssi1_flag_tx */ OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLDOWN | MUX_MODE7) /* ssi1_rdy_tx */ OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */ OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE7) /* ssi1_dat_rx */ OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE7) /* ssi1_flag_rx */ OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE4) /* ssi1_rdy_rx */ OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE7) /* ssi1_wake */ >; }; modem_pins1: pinmux_modem_core1_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x207a, PIN_INPUT | MUX_MODE4) /* gpio_34 (ape_rst_rq) */ OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE4) /* gpio_88 (cmt_rst_rq) */ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE4) /* gpio_93 (cmt_apeslpx) */ >; }; uart2_pins: pinmux_uart2_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts */ OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts */ OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx */ OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx */ >; }; }; &omap3_pmx_core2 { modem_pins2: pinmux_modem_core2_pins { pinctrl-single,pins = < OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* gpio_23 (cmt_en) */ >; }; }; &i2c1 { clock-frequency = <2900000>; twl: twl@48 { reg = <0x48>; interrupts = <7>; /* SYS_NIRQ cascaded to intc */ interrupt-parent = <&intc>; }; }; /include/ "twl4030.dtsi" &twl { compatible = "ti,twl5031"; twl_power: power { compatible = "ti,twl4030-power"; ti,use_poweroff; }; }; &twl_gpio { ti,pullups = <0x000001>; /* BIT(0) */ ti,pulldowns = <0x008106>; /* BIT(1) | BIT(2) | BIT(8) | BIT(15) */ }; &vdac { regulator-name = "vdac"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; &vpll1 { regulator-name = "vpll1"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; &vpll2 { regulator-name = "vpll2"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; &vaux1 { regulator-name = "vaux1"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; }; /* CSI-2 receiver */ &vaux2 { regulator-name = "vaux2"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; /* Cameras */ &vaux3 { regulator-name = "vaux3"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; }; &vaux4 { regulator-name = "vaux4"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; }; &vmmc1 { regulator-name = "vmmc1"; regulator-min-microvolt = <1850000>; regulator-max-microvolt = <3150000>; }; &vmmc2 { regulator-name = "vmmc2"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; }; &vintana1 { regulator-name = "vintana1"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; }; &vintana2 { regulator-name = "vintana2"; regulator-min-microvolt = <2750000>; regulator-max-microvolt = <2750000>; }; &vintdig { regulator-name = "vintdig"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; }; &vsim { regulator-name = "vsim"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; &vio { regulator-name = "vio"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; &i2c2 { clock-frequency = <400000>; as3645a@30 { reg = <0x30>; compatible = "ams,as3645a"; flash { flash-timeout-us = <150000>; flash-max-microamp = <320000>; led-max-microamp = <60000>; ams,input-max-microamp = <1750000>; }; indicator { led-max-microamp = <10000>; }; }; }; &i2c3 { clock-frequency = <400000>; lis302: lis302@1d { compatible = "st,lis3lv02d"; reg = <0x1d>; Vdd-supply = <&vaux1>; Vdd_IO-supply = <&vio>; pinctrl-names = "default"; pinctrl-0 = <&accelerator_pins>; interrupts-extended = <&gpio6 20 IRQ_TYPE_EDGE_FALLING>, <&gpio6 21 IRQ_TYPE_EDGE_FALLING>; /* 180, 181 */ /* click flags */ st,click-single-x; st,click-single-y; st,click-single-z; /* Limits are 0.5g * value */ st,click-threshold-x = <8>; st,click-threshold-y = <8>; st,click-threshold-z = <10>; /* Click must be longer than time limit */ st,click-time-limit = <9>; /* Kind of debounce filter */ st,click-latency = <50>; st,wakeup-x-hi; st,wakeup-y-hi; st,wakeup-threshold = <(800/18)>; /* millig-value / 18 to get HW values */ st,wakeup2-z-hi; st,wakeup2-threshold = <(1000/18)>; /* millig-value / 18 to get HW values */ st,highpass-cutoff-hz = <2>; /* Interrupt line 1 for thresholds */ st,irq1-ff-wu-1; st,irq1-ff-wu-2; /* Interrupt line 2 for click detection */ st,irq2-click; st,wu-duration-1 = <8>; st,wu-duration-2 = <8>; }; }; &mmc1 { status = "disabled"; }; &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins>; vmmc-supply = <&vemmc>; bus-width = <4>; ti,non-removable; }; &mmc3 { status = "disabled"; }; &usb_otg_hs { interface-type = <0>; usb-phy = <&usb2_phy>; phys = <&usb2_phy>; phy-names = "usb2-phy"; mode = <3>; power = <50>; }; &gpmc { ranges = <0 0 0x04000000 0x1000000>; /* CS0: 16MB for OneNAND */ onenand@0,0 { #address-cells = <1>; #size-cells = <1>; reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */ gpmc,sync-read; gpmc,sync-write; gpmc,burst-length = <16>; gpmc,burst-read; gpmc,burst-wrap; gpmc,burst-write; gpmc,device-width = <2>; gpmc,mux-add-data = <2>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <87>; gpmc,cs-wr-off-ns = <87>; gpmc,adv-on-ns = <0>; gpmc,adv-rd-off-ns = <10>; gpmc,adv-wr-off-ns = <10>; gpmc,oe-on-ns = <15>; gpmc,oe-off-ns = <87>; gpmc,we-on-ns = <0>; gpmc,we-off-ns = <87>; gpmc,rd-cycle-ns = <112>; gpmc,wr-cycle-ns = <112>; gpmc,access-ns = <81>; gpmc,page-burst-access-ns = <15>; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,wait-monitoring-ns = <0>; gpmc,clk-activation-ns = <5>; gpmc,wr-data-mux-bus-ns = <30>; gpmc,wr-access-ns = <81>; gpmc,sync-clk-ps = <15000>; /* * MTD partition table corresponding to Nokia's MeeGo 1.2 * Harmattan release. */ partition@0 { label = "bootloader"; reg = <0x00000000 0x00100000>; }; partition@1 { label = "config"; reg = <0x00100000 0x002c0000>; }; partition@2 { label = "kernel"; reg = <0x003c0000 0x01000000>; }; partition@3 { label = "log"; reg = <0x013c0000 0x00200000>; }; partition@4 { label = "var"; reg = <0x015c0000 0x1ca40000>; }; partition@5 { label = "moslo"; reg = <0x1e000000 0x02000000>; }; partition@6 { label = "omap2-onenand"; reg = <0x00000000 0x20000000>; }; }; }; &ssi_port1 { pinctrl-names = "default", "idle"; pinctrl-0 = <&ssi_pins>; pinctrl-1 = <&ssi_pins_idle>; ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */ modem: hsi-client { pinctrl-names = "default"; pinctrl-0 = <&modem_pins1 &modem_pins2>; hsi-channel-ids = <0>, <1>, <2>, <3>; hsi-channel-names = "mcsaab-control", "speech-control", "speech-data", "mcsaab-data"; hsi-speed-kbps = <96000>; hsi-mode = "frame"; hsi-flow = "synchronized"; hsi-arb-mode = "round-robin"; interrupts-extended = <&gpio2 2 IRQ_TYPE_EDGE_RISING>; /* gpio 34 */ gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>, /* gpio 93 */ <&gpio3 24 GPIO_ACTIVE_HIGH>, /* gpio 88 */ <&gpio1 23 GPIO_ACTIVE_HIGH>; /* gpio 23 */ gpio-names = "cmt_apeslpx", "cmt_rst_rq", "cmt_en"; }; }; &ssi_port2 { status = "disabled"; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&uart2_pins>; bluetooth { compatible = "ti,wl1271-bluetooth-nokia", "nokia,h4p-bluetooth"; reset-gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; /* 26 */ host-wakeup-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* 101 */ bluetooth-wakeup-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* 37 */ clocks = <&vctcxo>; clock-names = "sysclk"; }; };