From 63fe3fd393dc4e7ea3948e79947362ffbb0fd616 Mon Sep 17 00:00:00 2001
From: Yonghong Song <yhs@fb.com>
Date: Mon, 10 Aug 2020 20:08:52 -0700
Subject: libbpf: Do not use __builtin_offsetof for offsetof

Commit 5fbc220862fc ("tools/libpf: Add offsetof/container_of macro
in bpf_helpers.h") added a macro offsetof() to get the offset of a
structure member:

   #define offsetof(TYPE, MEMBER)  ((size_t)&((TYPE *)0)->MEMBER)

In certain use cases, size_t type may not be available so
Commit da7a35062bcc ("libbpf bpf_helpers: Use __builtin_offsetof
for offsetof") changed to use __builtin_offsetof which removed
the dependency on type size_t, which I suggested.

But using __builtin_offsetof will prevent CO-RE relocation
generation in case that, e.g., TYPE is annotated with "preserve_access_info"
where a relocation is desirable in case the member offset is changed
in a different kernel version. So this patch reverted back to
the original macro but using "unsigned long" instead of "site_t".

Fixes: da7a35062bcc ("libbpf bpf_helpers: Use __builtin_offsetof for offsetof")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/bpf/20200811030852.3396929-1-yhs@fb.com
---
 tools/lib/bpf/bpf_helpers.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'tools')

diff --git a/tools/lib/bpf/bpf_helpers.h b/tools/lib/bpf/bpf_helpers.h
index bc14db706b88..e9a4ecddb7a5 100644
--- a/tools/lib/bpf/bpf_helpers.h
+++ b/tools/lib/bpf/bpf_helpers.h
@@ -40,7 +40,7 @@
  * Helper macro to manipulate data structures
  */
 #ifndef offsetof
-#define offsetof(TYPE, MEMBER)  __builtin_offsetof(TYPE, MEMBER)
+#define offsetof(TYPE, MEMBER)	((unsigned long)&((TYPE *)0)->MEMBER)
 #endif
 #ifndef container_of
 #define container_of(ptr, type, member)				\
-- 
cgit v1.2.3


From 0390c429dbed4068bd2cd8dded937d9a5ec24cd2 Mon Sep 17 00:00:00 2001
From: Jianlin Lv <Jianlin.Lv@arm.com>
Date: Mon, 10 Aug 2020 23:39:40 +0800
Subject: selftests/bpf: Fix segmentation fault in test_progs

test_progs reports the segmentation fault as below:

  $ sudo ./test_progs -t mmap --verbose
  test_mmap:PASS:skel_open_and_load 0 nsec
  [...]
  test_mmap:PASS:adv_mmap1 0 nsec
  test_mmap:PASS:adv_mmap2 0 nsec
  test_mmap:PASS:adv_mmap3 0 nsec
  test_mmap:PASS:adv_mmap4 0 nsec
  Segmentation fault

This issue was triggered because mmap() and munmap() used inconsistent
length parameters; mmap() creates a new mapping of 3 * page_size, but the
length parameter set in the subsequent re-map and munmap() functions is
4 * page_size; this leads to the destruction of the process space.

To fix this issue, first create 4 pages of anonymous mapping, then do all
the mmap() with MAP_FIXED.

Another issue is that when unmap the second page fails, the length
parameter to delete tmp1 mappings should be 4 * page_size.

Signed-off-by: Jianlin Lv <Jianlin.Lv@arm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200810153940.125508-1-Jianlin.Lv@arm.com
---
 tools/testing/selftests/bpf/prog_tests/mmap.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

(limited to 'tools')

diff --git a/tools/testing/selftests/bpf/prog_tests/mmap.c b/tools/testing/selftests/bpf/prog_tests/mmap.c
index 43d0b5578f46..9c3c5c0f068f 100644
--- a/tools/testing/selftests/bpf/prog_tests/mmap.c
+++ b/tools/testing/selftests/bpf/prog_tests/mmap.c
@@ -21,7 +21,7 @@ void test_mmap(void)
 	const long page_size = sysconf(_SC_PAGE_SIZE);
 	int err, duration = 0, i, data_map_fd, data_map_id, tmp_fd, rdmap_fd;
 	struct bpf_map *data_map, *bss_map;
-	void *bss_mmaped = NULL, *map_mmaped = NULL, *tmp1, *tmp2;
+	void *bss_mmaped = NULL, *map_mmaped = NULL, *tmp0, *tmp1, *tmp2;
 	struct test_mmap__bss *bss_data;
 	struct bpf_map_info map_info;
 	__u32 map_info_sz = sizeof(map_info);
@@ -183,16 +183,23 @@ void test_mmap(void)
 
 	/* check some more advanced mmap() manipulations */
 
+	tmp0 = mmap(NULL, 4 * page_size, PROT_READ, MAP_SHARED | MAP_ANONYMOUS,
+			  -1, 0);
+	if (CHECK(tmp0 == MAP_FAILED, "adv_mmap0", "errno %d\n", errno))
+		goto cleanup;
+
 	/* map all but last page: pages 1-3 mapped */
-	tmp1 = mmap(NULL, 3 * page_size, PROT_READ, MAP_SHARED,
+	tmp1 = mmap(tmp0, 3 * page_size, PROT_READ, MAP_SHARED | MAP_FIXED,
 			  data_map_fd, 0);
-	if (CHECK(tmp1 == MAP_FAILED, "adv_mmap1", "errno %d\n", errno))
+	if (CHECK(tmp0 != tmp1, "adv_mmap1", "tmp0: %p, tmp1: %p\n", tmp0, tmp1)) {
+		munmap(tmp0, 4 * page_size);
 		goto cleanup;
+	}
 
 	/* unmap second page: pages 1, 3 mapped */
 	err = munmap(tmp1 + page_size, page_size);
 	if (CHECK(err, "adv_mmap2", "errno %d\n", errno)) {
-		munmap(tmp1, map_sz);
+		munmap(tmp1, 4 * page_size);
 		goto cleanup;
 	}
 
@@ -201,7 +208,7 @@ void test_mmap(void)
 		    MAP_SHARED | MAP_FIXED, data_map_fd, 0);
 	if (CHECK(tmp2 == MAP_FAILED, "adv_mmap3", "errno %d\n", errno)) {
 		munmap(tmp1, page_size);
-		munmap(tmp1 + 2*page_size, page_size);
+		munmap(tmp1 + 2*page_size, 2 * page_size);
 		goto cleanup;
 	}
 	CHECK(tmp1 + page_size != tmp2, "adv_mmap4",
@@ -211,7 +218,7 @@ void test_mmap(void)
 	tmp2 = mmap(tmp1, 4 * page_size, PROT_READ, MAP_SHARED | MAP_FIXED,
 		    data_map_fd, 0);
 	if (CHECK(tmp2 == MAP_FAILED, "adv_mmap5", "errno %d\n", errno)) {
-		munmap(tmp1, 3 * page_size); /* unmap page 1 */
+		munmap(tmp1, 4 * page_size); /* unmap page 1 */
 		goto cleanup;
 	}
 	CHECK(tmp1 != tmp2, "adv_mmap6", "tmp1: %p, tmp2: %p\n", tmp1, tmp2);
-- 
cgit v1.2.3


From da7bdfdd23b858e6d97a1e4b461548e23d16977f Mon Sep 17 00:00:00 2001
From: Stanislav Fomichev <sdf@google.com>
Date: Fri, 7 Aug 2020 15:38:46 -0700
Subject: selftests/bpf: Fix v4_to_v6 in sk_lookup

I'm getting some garbage in bytes 8 and 9 when doing conversion
from sockaddr_in to sockaddr_in6 (leftover from AF_INET?). Let's
explicitly clear the higher bytes.

Fixes: 0ab5539f8584 ("selftests/bpf: Tests for BPF_SK_LOOKUP attach point")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20200807223846.4190917-1-sdf@google.com
---
 tools/testing/selftests/bpf/prog_tests/sk_lookup.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'tools')

diff --git a/tools/testing/selftests/bpf/prog_tests/sk_lookup.c b/tools/testing/selftests/bpf/prog_tests/sk_lookup.c
index c571584c00f5..9ff0412e1fd3 100644
--- a/tools/testing/selftests/bpf/prog_tests/sk_lookup.c
+++ b/tools/testing/selftests/bpf/prog_tests/sk_lookup.c
@@ -309,6 +309,7 @@ static void v4_to_v6(struct sockaddr_storage *ss)
 	v6->sin6_addr.s6_addr[10] = 0xff;
 	v6->sin6_addr.s6_addr[11] = 0xff;
 	memcpy(&v6->sin6_addr.s6_addr[12], &v4.sin_addr.s_addr, 4);
+	memset(&v6->sin6_addr.s6_addr[0], 0, 10);
 }
 
 static int udp_recv_send(int server_fd)
-- 
cgit v1.2.3


From 8faf7fc597d59b142af41ddd4a2d59485f75f88a Mon Sep 17 00:00:00 2001
From: Andrii Nakryiko <andriin@fb.com>
Date: Tue, 11 Aug 2020 19:59:07 -0700
Subject: tools/bpftool: Make skeleton code C++17-friendly by dropping typeof()

Seems like C++17 standard mode doesn't recognize typeof() anymore. This can
be tested by compiling test_cpp test with -std=c++17 or -std=c++1z options.
The use of typeof in skeleton generated code is unnecessary, all types are
well-known at the time of code generation, so remove all typeof()'s to make
skeleton code more future-proof when interacting with C++ compilers.

Fixes: 985ead416df3 ("bpftool: Add skeleton codegen command")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200812025907.1371956-1-andriin@fb.com
---
 tools/bpf/bpftool/gen.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'tools')

diff --git a/tools/bpf/bpftool/gen.c b/tools/bpf/bpftool/gen.c
index 8a4c2b3b0cd6..db80e836816e 100644
--- a/tools/bpf/bpftool/gen.c
+++ b/tools/bpf/bpftool/gen.c
@@ -397,7 +397,7 @@ static int do_skeleton(int argc, char **argv)
 		{							    \n\
 			struct %1$s *obj;				    \n\
 									    \n\
-			obj = (typeof(obj))calloc(1, sizeof(*obj));	    \n\
+			obj = (struct %1$s *)calloc(1, sizeof(*obj));	    \n\
 			if (!obj)					    \n\
 				return NULL;				    \n\
 			if (%1$s__create_skeleton(obj))			    \n\
@@ -461,7 +461,7 @@ static int do_skeleton(int argc, char **argv)
 		{							    \n\
 			struct bpf_object_skeleton *s;			    \n\
 									    \n\
-			s = (typeof(s))calloc(1, sizeof(*s));		    \n\
+			s = (struct bpf_object_skeleton *)calloc(1, sizeof(*s));\n\
 			if (!s)						    \n\
 				return -1;				    \n\
 			obj->skeleton = s;				    \n\
@@ -479,7 +479,7 @@ static int do_skeleton(int argc, char **argv)
 				/* maps */				    \n\
 				s->map_cnt = %zu;			    \n\
 				s->map_skel_sz = sizeof(*s->maps);	    \n\
-				s->maps = (typeof(s->maps))calloc(s->map_cnt, s->map_skel_sz);\n\
+				s->maps = (struct bpf_map_skeleton *)calloc(s->map_cnt, s->map_skel_sz);\n\
 				if (!s->maps)				    \n\
 					goto err;			    \n\
 			",
@@ -515,7 +515,7 @@ static int do_skeleton(int argc, char **argv)
 				/* programs */				    \n\
 				s->prog_cnt = %zu;			    \n\
 				s->prog_skel_sz = sizeof(*s->progs);	    \n\
-				s->progs = (typeof(s->progs))calloc(s->prog_cnt, s->prog_skel_sz);\n\
+				s->progs = (struct bpf_prog_skeleton *)calloc(s->prog_cnt, s->prog_skel_sz);\n\
 				if (!s->progs)				    \n\
 					goto err;			    \n\
 			",
-- 
cgit v1.2.3


From 702eddc77a905782083b14ccd05b23840675fd18 Mon Sep 17 00:00:00 2001
From: Jean-Philippe Brucker <jean-philippe@linaro.org>
Date: Wed, 12 Aug 2020 16:39:10 +0200
Subject: libbpf: Handle GCC built-in types for Arm NEON

When building Arm NEON (SIMD) code from lib/raid6/neon.uc, GCC emits
DWARF information using a base type "__Poly8_t", which is internal to
GCC and not recognized by Clang. This causes build failures when
building with Clang a vmlinux.h generated from an arm64 kernel that was
built with GCC.

	vmlinux.h:47284:9: error: unknown type name '__Poly8_t'
	typedef __Poly8_t poly8x16_t[16];
	        ^~~~~~~~~

The polyX_t types are defined as unsigned integers in the "Arm C
Language Extension" document (101028_Q220_00_en). Emit typedefs based on
standard integer types for the GCC internal types, similar to those
emitted by Clang.

Including linux/kernel.h to use ARRAY_SIZE() incidentally redefined
max(), causing a build bug due to different types, hence the seemingly
unrelated change.

Reported-by: Jakov Petrina <jakov.petrina@sartura.hr>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200812143909.3293280-1-jean-philippe@linaro.org
---
 tools/lib/bpf/btf_dump.c | 35 ++++++++++++++++++++++++++++++++++-
 1 file changed, 34 insertions(+), 1 deletion(-)

(limited to 'tools')

diff --git a/tools/lib/bpf/btf_dump.c b/tools/lib/bpf/btf_dump.c
index cf711168d34a..ac81f3f8957a 100644
--- a/tools/lib/bpf/btf_dump.c
+++ b/tools/lib/bpf/btf_dump.c
@@ -13,6 +13,7 @@
 #include <errno.h>
 #include <linux/err.h>
 #include <linux/btf.h>
+#include <linux/kernel.h>
 #include "btf.h"
 #include "hashmap.h"
 #include "libbpf.h"
@@ -549,6 +550,9 @@ static int btf_dump_order_type(struct btf_dump *d, __u32 id, bool through_ptr)
 	}
 }
 
+static void btf_dump_emit_missing_aliases(struct btf_dump *d, __u32 id,
+					  const struct btf_type *t);
+
 static void btf_dump_emit_struct_fwd(struct btf_dump *d, __u32 id,
 				     const struct btf_type *t);
 static void btf_dump_emit_struct_def(struct btf_dump *d, __u32 id,
@@ -671,6 +675,9 @@ static void btf_dump_emit_type(struct btf_dump *d, __u32 id, __u32 cont_id)
 
 	switch (kind) {
 	case BTF_KIND_INT:
+		/* Emit type alias definitions if necessary */
+		btf_dump_emit_missing_aliases(d, id, t);
+
 		tstate->emit_state = EMITTED;
 		break;
 	case BTF_KIND_ENUM:
@@ -870,7 +877,7 @@ static void btf_dump_emit_struct_def(struct btf_dump *d,
 			btf_dump_printf(d, ": %d", m_sz);
 			off = m_off + m_sz;
 		} else {
-			m_sz = max(0, btf__resolve_size(d->btf, m->type));
+			m_sz = max(0LL, btf__resolve_size(d->btf, m->type));
 			off = m_off + m_sz * 8;
 		}
 		btf_dump_printf(d, ";");
@@ -890,6 +897,32 @@ static void btf_dump_emit_struct_def(struct btf_dump *d,
 		btf_dump_printf(d, " __attribute__((packed))");
 }
 
+static const char *missing_base_types[][2] = {
+	/*
+	 * GCC emits typedefs to its internal __PolyX_t types when compiling Arm
+	 * SIMD intrinsics. Alias them to standard base types.
+	 */
+	{ "__Poly8_t",		"unsigned char" },
+	{ "__Poly16_t",		"unsigned short" },
+	{ "__Poly64_t",		"unsigned long long" },
+	{ "__Poly128_t",	"unsigned __int128" },
+};
+
+static void btf_dump_emit_missing_aliases(struct btf_dump *d, __u32 id,
+					  const struct btf_type *t)
+{
+	const char *name = btf_dump_type_name(d, id);
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(missing_base_types); i++) {
+		if (strcmp(name, missing_base_types[i][0]) == 0) {
+			btf_dump_printf(d, "typedef %s %s;\n\n",
+					missing_base_types[i][1], name);
+			break;
+		}
+	}
+}
+
 static void btf_dump_emit_enum_fwd(struct btf_dump *d, __u32 id,
 				   const struct btf_type *t)
 {
-- 
cgit v1.2.3


From 6d006a4e38d5a52ef27a8204ac358b96da8148ec Mon Sep 17 00:00:00 2001
From: Fabian Frederick <fabf@skynet.be>
Date: Fri, 7 Aug 2020 21:31:11 +0200
Subject: selftests: netfilter: add checktool function

avoid repeating the same test for different toolcheck

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
---
 tools/testing/selftests/netfilter/nft_flowtable.sh | 33 ++++++++--------------
 1 file changed, 11 insertions(+), 22 deletions(-)

(limited to 'tools')

diff --git a/tools/testing/selftests/netfilter/nft_flowtable.sh b/tools/testing/selftests/netfilter/nft_flowtable.sh
index d3e0809ab368..68a183753c6c 100755
--- a/tools/testing/selftests/netfilter/nft_flowtable.sh
+++ b/tools/testing/selftests/netfilter/nft_flowtable.sh
@@ -21,29 +21,18 @@ ns2out=""
 
 log_netns=$(sysctl -n net.netfilter.nf_log_all_netns)
 
-nft --version > /dev/null 2>&1
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not run test without nft tool"
-	exit $ksft_skip
-fi
-
-ip -Version > /dev/null 2>&1
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not run test without ip tool"
-	exit $ksft_skip
-fi
-
-which nc > /dev/null 2>&1
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not run test without nc (netcat)"
-	exit $ksft_skip
-fi
+checktool (){
+	$1 > /dev/null 2>&1
+	if [ $? -ne 0 ];then
+		echo "SKIP: Could not $2"
+		exit $ksft_skip
+	fi
+}
 
-ip netns add nsr1
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not create net namespace"
-	exit $ksft_skip
-fi
+checktool "nft --version" "run test without nft tool"
+checktool "ip -Version" "run test without ip tool"
+checktool "which nc" "run test without nc (netcat)"
+checktool "ip netns add nsr1" "create net namespace"
 
 ip netns add ns1
 ip netns add ns2
-- 
cgit v1.2.3


From dd08734d8aca31f8991b26cd69d6bb99b617e451 Mon Sep 17 00:00:00 2001
From: Fabian Frederick <fabf@skynet.be>
Date: Fri, 7 Aug 2020 21:31:50 +0200
Subject: selftests: netfilter: add MTU arguments to flowtables

Add some documentation, default values defined in original
script and Originator/Link/Responder arguments
using getopts like in tools/power/cpupower/bench/cpufreq-bench_plot.sh

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
---
 tools/testing/selftests/netfilter/nft_flowtable.sh | 30 +++++++++++++++++-----
 1 file changed, 24 insertions(+), 6 deletions(-)

(limited to 'tools')

diff --git a/tools/testing/selftests/netfilter/nft_flowtable.sh b/tools/testing/selftests/netfilter/nft_flowtable.sh
index 68a183753c6c..e98cac6f8bfd 100755
--- a/tools/testing/selftests/netfilter/nft_flowtable.sh
+++ b/tools/testing/selftests/netfilter/nft_flowtable.sh
@@ -2,13 +2,18 @@
 # SPDX-License-Identifier: GPL-2.0
 #
 # This tests basic flowtable functionality.
-# Creates following topology:
+# Creates following default topology:
 #
 # Originator (MTU 9000) <-Router1-> MTU 1500 <-Router2-> Responder (MTU 2000)
 # Router1 is the one doing flow offloading, Router2 has no special
 # purpose other than having a link that is smaller than either Originator
 # and responder, i.e. TCPMSS announced values are too large and will still
 # result in fragmentation and/or PMTU discovery.
+#
+# You can check with different Orgininator/Link/Responder MTU eg:
+# sh nft_flowtable.sh -o1000 -l500 -r100
+#
+
 
 # Kselftest framework requirement - SKIP code is 4.
 ksft_skip=4
@@ -78,11 +83,24 @@ ip -net nsr2 addr add dead:2::1/64 dev veth1
 # ns2 is going via nsr2 with a smaller mtu, so that TCPMSS announced by both peers
 # is NOT the lowest link mtu.
 
-ip -net nsr1 link set veth0 mtu 9000
-ip -net ns1 link set eth0 mtu 9000
+omtu=9000
+lmtu=1500
+rmtu=2000
+
+while getopts "o:l:r:" o
+do
+	case $o in
+		o) omtu=$OPTARG;;
+		l) lmtu=$OPTARG;;
+		r) rmtu=$OPTARG;;
+	esac
+done
+
+ip -net nsr1 link set veth0 mtu $omtu
+ip -net ns1 link set eth0 mtu $omtu
 
-ip -net nsr2 link set veth1 mtu 2000
-ip -net ns2 link set eth0 mtu 2000
+ip -net nsr2 link set veth1 mtu $rmtu
+ip -net ns2 link set eth0 mtu $rmtu
 
 # transfer-net between nsr1 and nsr2.
 # these addresses are not used for connections.
@@ -136,7 +154,7 @@ table inet filter {
       # as PMTUd is off.
       # This rule is deleted for the last test, when we expect PMTUd
       # to kick in and ensure all packets meet mtu requirements.
-      meta length gt 1500 accept comment something-to-grep-for
+      meta length gt $lmtu accept comment something-to-grep-for
 
       # next line blocks connection w.o. working offload.
       # we only do this for reverse dir, because we expect packets to
-- 
cgit v1.2.3


From d8bb9abe21071c64d077f9db3b403823a389464f Mon Sep 17 00:00:00 2001
From: Fabian Frederick <fabf@skynet.be>
Date: Fri, 7 Aug 2020 21:32:20 +0200
Subject: selftests: netfilter: kill running process only

Avoid noise like the following:
nft_flowtable.sh: line 250: kill: (4691) - No such process

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
---
 tools/testing/selftests/netfilter/nft_flowtable.sh | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

(limited to 'tools')

diff --git a/tools/testing/selftests/netfilter/nft_flowtable.sh b/tools/testing/selftests/netfilter/nft_flowtable.sh
index e98cac6f8bfd..a47d1d832210 100755
--- a/tools/testing/selftests/netfilter/nft_flowtable.sh
+++ b/tools/testing/selftests/netfilter/nft_flowtable.sh
@@ -250,8 +250,14 @@ test_tcp_forwarding_ip()
 
 	sleep 3
 
-	kill $lpid
-	kill $cpid
+	if ps -p $lpid > /dev/null;then
+		kill $lpid
+	fi
+
+	if ps -p $cpid > /dev/null;then
+		kill $cpid
+	fi
+
 	wait
 
 	check_transfer "$ns1in" "$ns2out" "ns1 -> ns2"
-- 
cgit v1.2.3


From 23ab656be263813acc3c20623757d3cd1496d9e1 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Toke=20H=C3=B8iland-J=C3=B8rgensen?= <toke@redhat.com>
Date: Thu, 13 Aug 2020 16:29:05 +0200
Subject: libbpf: Prevent overriding errno when logging errors
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Turns out there were a few more instances where libbpf didn't save the
errno before writing an error message, causing errno to be overridden by
the printf() return and the error disappearing if logging is enabled.

Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200813142905.160381-1-toke@redhat.com
---
 tools/lib/bpf/libbpf.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

(limited to 'tools')

diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c
index 0a06124f7999..0d48c18d5030 100644
--- a/tools/lib/bpf/libbpf.c
+++ b/tools/lib/bpf/libbpf.c
@@ -3478,10 +3478,11 @@ bpf_object__probe_global_data(struct bpf_object *obj)
 
 	map = bpf_create_map_xattr(&map_attr);
 	if (map < 0) {
-		cp = libbpf_strerror_r(errno, errmsg, sizeof(errmsg));
+		ret = -errno;
+		cp = libbpf_strerror_r(ret, errmsg, sizeof(errmsg));
 		pr_warn("Error in %s():%s(%d). Couldn't create simple array map.\n",
-			__func__, cp, errno);
-		return -errno;
+			__func__, cp, -ret);
+		return ret;
 	}
 
 	insns[0].imm = map;
@@ -6012,9 +6013,10 @@ int bpf_program__pin_instance(struct bpf_program *prog, const char *path,
 	}
 
 	if (bpf_obj_pin(prog->instances.fds[instance], path)) {
-		cp = libbpf_strerror_r(errno, errmsg, sizeof(errmsg));
+		err = -errno;
+		cp = libbpf_strerror_r(err, errmsg, sizeof(errmsg));
 		pr_warn("failed to pin program: %s\n", cp);
-		return -errno;
+		return err;
 	}
 	pr_debug("pinned program '%s'\n", path);
 
-- 
cgit v1.2.3


From 86ed4be68fdee23df4843a59f91c1ac7fc05e860 Mon Sep 17 00:00:00 2001
From: John Fastabend <john.fastabend@gmail.com>
Date: Tue, 11 Aug 2020 15:05:14 -0700
Subject: bpf, selftests: Add tests for ctx access in sock_ops with single
 register

To verify fix ("bpf: sock_ops ctx access may stomp registers in corner case")
we want to force compiler to generate the following code when accessing a
field with BPF_TCP_SOCK_GET_COMMON,

     r1 = *(u32 *)(r1 + 96) // r1 is skops ptr

Rather than depend on clang to do this we add the test with inline asm to
the tcpbpf test. This saves us from having to create another runner and
ensures that if we break this again test_tcpbpf will crash.

With above code we get the xlated code,

  11: (7b) *(u64 *)(r1 +32) = r9
  12: (61) r9 = *(u32 *)(r1 +28)
  13: (15) if r9 == 0x0 goto pc+4
  14: (79) r9 = *(u64 *)(r1 +32)
  15: (79) r1 = *(u64 *)(r1 +0)
  16: (61) r1 = *(u32 *)(r1 +2348)
  17: (05) goto pc+1
  18: (79) r9 = *(u64 *)(r1 +32)

We also add the normal case where src_reg != dst_reg so we can compare
code generation easily from llvm-objdump and ensure that case continues
to work correctly. The normal code is xlated to,

  20: (b7) r1 = 0
  21: (61) r1 = *(u32 *)(r3 +28)
  22: (15) if r1 == 0x0 goto pc+2
  23: (79) r1 = *(u64 *)(r3 +0)
  24: (61) r1 = *(u32 *)(r1 +2348)

Where the temp variable is not used.

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/159718351457.4728.3295119261717842496.stgit@john-Precision-5820-Tower
---
 tools/testing/selftests/bpf/progs/test_tcpbpf_kern.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

(limited to 'tools')

diff --git a/tools/testing/selftests/bpf/progs/test_tcpbpf_kern.c b/tools/testing/selftests/bpf/progs/test_tcpbpf_kern.c
index 1f1966e86e9f..f8b136827fcc 100644
--- a/tools/testing/selftests/bpf/progs/test_tcpbpf_kern.c
+++ b/tools/testing/selftests/bpf/progs/test_tcpbpf_kern.c
@@ -54,6 +54,7 @@ SEC("sockops")
 int bpf_testcb(struct bpf_sock_ops *skops)
 {
 	char header[sizeof(struct ipv6hdr) + sizeof(struct tcphdr)];
+	struct bpf_sock_ops *reuse = skops;
 	struct tcphdr *thdr;
 	int good_call_rv = 0;
 	int bad_call_rv = 0;
@@ -62,6 +63,18 @@ int bpf_testcb(struct bpf_sock_ops *skops)
 	int v = 0;
 	int op;
 
+	/* Test reading fields in bpf_sock_ops using single register */
+	asm volatile (
+		"%[reuse] = *(u32 *)(%[reuse] +96)"
+		: [reuse] "+r"(reuse)
+		:);
+
+	asm volatile (
+		"%[op] = *(u32 *)(%[skops] +96)"
+		: [op] "+r"(op)
+		: [skops] "r"(skops)
+		:);
+
 	op = (int) skops->op;
 
 	update_event_map(op);
-- 
cgit v1.2.3


From 8e0c1517565f06027b68caf2875620ddf6914eee Mon Sep 17 00:00:00 2001
From: John Fastabend <john.fastabend@gmail.com>
Date: Tue, 11 Aug 2020 15:05:33 -0700
Subject: bpf, selftests: Add tests for sock_ops load with r9, r8.r7 registers

Loads in sock_ops case when using high registers requires extra logic to
ensure the correct temporary value is used. We need to ensure the temp
register does not use either the src_reg or dst_reg. Lets add an asm
test to force the logic is triggered.

The xlated code is here,

  30: (7b) *(u64 *)(r9 +32) = r7
  31: (61) r7 = *(u32 *)(r9 +28)
  32: (15) if r7 == 0x0 goto pc+2
  33: (79) r7 = *(u64 *)(r9 +0)
  34: (63) *(u32 *)(r7 +916) = r8
  35: (79) r7 = *(u64 *)(r9 +32)

Notice r9 and r8 are not used for temp registers and r7 is chosen.

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/159718353345.4728.8805043614257933227.stgit@john-Precision-5820-Tower
---
 tools/testing/selftests/bpf/progs/test_tcpbpf_kern.c | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'tools')

diff --git a/tools/testing/selftests/bpf/progs/test_tcpbpf_kern.c b/tools/testing/selftests/bpf/progs/test_tcpbpf_kern.c
index f8b136827fcc..6420b61fbbc8 100644
--- a/tools/testing/selftests/bpf/progs/test_tcpbpf_kern.c
+++ b/tools/testing/selftests/bpf/progs/test_tcpbpf_kern.c
@@ -75,6 +75,13 @@ int bpf_testcb(struct bpf_sock_ops *skops)
 		: [skops] "r"(skops)
 		:);
 
+	asm volatile (
+		"r9 = %[skops];\n"
+		"r8 = *(u32 *)(r9 +164);\n"
+		"*(u32 *)(r9 +164) = r8;\n"
+		:: [skops] "r"(skops)
+		: "r9", "r8");
+
 	op = (int) skops->op;
 
 	update_event_map(op);
-- 
cgit v1.2.3


From 9efa9e499799f939968aff1123cc7e8184960e48 Mon Sep 17 00:00:00 2001
From: John Fastabend <john.fastabend@gmail.com>
Date: Tue, 11 Aug 2020 15:05:53 -0700
Subject: bpf, selftests: Add tests to sock_ops for loading sk

Add tests to directly accesse sock_ops sk field. Then use it to
ensure a bad pointer access will fault if something goes wrong.
We do three tests:

The first test ensures when we read sock_ops sk pointer into the
same register that we don't fault as described earlier. Here r9
is chosen as the temp register.  The xlated code is,

  36: (7b) *(u64 *)(r1 +32) = r9
  37: (61) r9 = *(u32 *)(r1 +28)
  38: (15) if r9 == 0x0 goto pc+3
  39: (79) r9 = *(u64 *)(r1 +32)
  40: (79) r1 = *(u64 *)(r1 +0)
  41: (05) goto pc+1
  42: (79) r9 = *(u64 *)(r1 +32)

The second test ensures the temp register selection does not collide
with in-use register r9. Shown here r8 is chosen because r9 is the
sock_ops pointer. The xlated code is as follows,

  46: (7b) *(u64 *)(r9 +32) = r8
  47: (61) r8 = *(u32 *)(r9 +28)
  48: (15) if r8 == 0x0 goto pc+3
  49: (79) r8 = *(u64 *)(r9 +32)
  50: (79) r9 = *(u64 *)(r9 +0)
  51: (05) goto pc+1
  52: (79) r8 = *(u64 *)(r9 +32)

And finally, ensure we didn't break the base case where dst_reg does
not equal the source register,

  56: (61) r2 = *(u32 *)(r1 +28)
  57: (15) if r2 == 0x0 goto pc+1
  58: (79) r2 = *(u64 *)(r1 +0)

Notice it takes us an extra four instructions when src reg is the
same as dst reg. One to save the reg, two to restore depending on
the branch taken and a goto to jump over the second restore.

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/159718355325.4728.4163036953345999636.stgit@john-Precision-5820-Tower
---
 .../testing/selftests/bpf/progs/test_tcpbpf_kern.c  | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

(limited to 'tools')

diff --git a/tools/testing/selftests/bpf/progs/test_tcpbpf_kern.c b/tools/testing/selftests/bpf/progs/test_tcpbpf_kern.c
index 6420b61fbbc8..3e6912e4df3d 100644
--- a/tools/testing/selftests/bpf/progs/test_tcpbpf_kern.c
+++ b/tools/testing/selftests/bpf/progs/test_tcpbpf_kern.c
@@ -82,6 +82,27 @@ int bpf_testcb(struct bpf_sock_ops *skops)
 		:: [skops] "r"(skops)
 		: "r9", "r8");
 
+	asm volatile (
+		"r1 = %[skops];\n"
+		"r1 = *(u64 *)(r1 +184);\n"
+		"if r1 == 0 goto +1;\n"
+		"r1 = *(u32 *)(r1 +4);\n"
+		:: [skops] "r"(skops):"r1");
+
+	asm volatile (
+		"r9 = %[skops];\n"
+		"r9 = *(u64 *)(r9 +184);\n"
+		"if r9 == 0 goto +1;\n"
+		"r9 = *(u32 *)(r9 +4);\n"
+		:: [skops] "r"(skops):"r9");
+
+	asm volatile (
+		"r1 = %[skops];\n"
+		"r2 = *(u64 *)(r1 +184);\n"
+		"if r2 == 0 goto +1;\n"
+		"r2 = *(u32 *)(r2 +4);\n"
+		:: [skops] "r"(skops):"r1", "r2");
+
 	op = (int) skops->op;
 
 	update_event_map(op);
-- 
cgit v1.2.3


From 09f44b753a7d120becc80213c3459183c8acd26b Mon Sep 17 00:00:00 2001
From: Andrii Nakryiko <andriin@fb.com>
Date: Thu, 13 Aug 2020 13:49:37 -0700
Subject: tools/bpftool: Fix compilation warnings in 32-bit mode

Fix few compilation warnings in bpftool when compiling in 32-bit mode.
Abstract away u64 to pointer conversion into a helper function.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200813204945.1020225-2-andriin@fb.com
---
 tools/bpf/bpftool/btf_dumper.c |  2 +-
 tools/bpf/bpftool/link.c       |  4 ++--
 tools/bpf/bpftool/main.h       | 10 +++++++++-
 tools/bpf/bpftool/prog.c       | 16 ++++++++--------
 4 files changed, 20 insertions(+), 12 deletions(-)

(limited to 'tools')

diff --git a/tools/bpf/bpftool/btf_dumper.c b/tools/bpf/bpftool/btf_dumper.c
index ede162f83eea..0e9310727281 100644
--- a/tools/bpf/bpftool/btf_dumper.c
+++ b/tools/bpf/bpftool/btf_dumper.c
@@ -67,7 +67,7 @@ static int dump_prog_id_as_func_ptr(const struct btf_dumper *d,
 	if (!info->btf_id || !info->nr_func_info ||
 	    btf__get_from_id(info->btf_id, &prog_btf))
 		goto print;
-	finfo = (struct bpf_func_info *)info->func_info;
+	finfo = u64_to_ptr(info->func_info);
 	func_type = btf__type_by_id(prog_btf, finfo->type_id);
 	if (!func_type || !btf_is_func(func_type))
 		goto print;
diff --git a/tools/bpf/bpftool/link.c b/tools/bpf/bpftool/link.c
index 1b793759170e..a89f09e3c848 100644
--- a/tools/bpf/bpftool/link.c
+++ b/tools/bpf/bpftool/link.c
@@ -106,7 +106,7 @@ static int show_link_close_json(int fd, struct bpf_link_info *info)
 	switch (info->type) {
 	case BPF_LINK_TYPE_RAW_TRACEPOINT:
 		jsonw_string_field(json_wtr, "tp_name",
-				   (const char *)info->raw_tracepoint.tp_name);
+				   u64_to_ptr(info->raw_tracepoint.tp_name));
 		break;
 	case BPF_LINK_TYPE_TRACING:
 		err = get_prog_info(info->prog_id, &prog_info);
@@ -185,7 +185,7 @@ static int show_link_close_plain(int fd, struct bpf_link_info *info)
 	switch (info->type) {
 	case BPF_LINK_TYPE_RAW_TRACEPOINT:
 		printf("\n\ttp '%s'  ",
-		       (const char *)info->raw_tracepoint.tp_name);
+		       (const char *)u64_to_ptr(info->raw_tracepoint.tp_name));
 		break;
 	case BPF_LINK_TYPE_TRACING:
 		err = get_prog_info(info->prog_id, &prog_info);
diff --git a/tools/bpf/bpftool/main.h b/tools/bpf/bpftool/main.h
index e3a79b5a9960..c46e52137b87 100644
--- a/tools/bpf/bpftool/main.h
+++ b/tools/bpf/bpftool/main.h
@@ -21,7 +21,15 @@
 /* Make sure we do not use kernel-only integer typedefs */
 #pragma GCC poison u8 u16 u32 u64 s8 s16 s32 s64
 
-#define ptr_to_u64(ptr)	((__u64)(unsigned long)(ptr))
+static inline __u64 ptr_to_u64(const void *ptr)
+{
+	return (__u64)(unsigned long)ptr;
+}
+
+static inline void *u64_to_ptr(__u64 ptr)
+{
+	return (void *)(unsigned long)ptr;
+}
 
 #define NEXT_ARG()	({ argc--; argv++; if (argc < 0) usage(); })
 #define NEXT_ARGP()	({ (*argc)--; (*argv)++; if (*argc < 0) usage(); })
diff --git a/tools/bpf/bpftool/prog.c b/tools/bpf/bpftool/prog.c
index 158995d853b0..d393eb8263a6 100644
--- a/tools/bpf/bpftool/prog.c
+++ b/tools/bpf/bpftool/prog.c
@@ -428,14 +428,14 @@ prog_dump(struct bpf_prog_info *info, enum dump_mode mode,
 			p_info("no instructions returned");
 			return -1;
 		}
-		buf = (unsigned char *)(info->jited_prog_insns);
+		buf = u64_to_ptr(info->jited_prog_insns);
 		member_len = info->jited_prog_len;
 	} else {	/* DUMP_XLATED */
 		if (info->xlated_prog_len == 0 || !info->xlated_prog_insns) {
 			p_err("error retrieving insn dump: kernel.kptr_restrict set?");
 			return -1;
 		}
-		buf = (unsigned char *)info->xlated_prog_insns;
+		buf = u64_to_ptr(info->xlated_prog_insns);
 		member_len = info->xlated_prog_len;
 	}
 
@@ -444,7 +444,7 @@ prog_dump(struct bpf_prog_info *info, enum dump_mode mode,
 		return -1;
 	}
 
-	func_info = (void *)info->func_info;
+	func_info = u64_to_ptr(info->func_info);
 
 	if (info->nr_line_info) {
 		prog_linfo = bpf_prog_linfo__new(info);
@@ -462,7 +462,7 @@ prog_dump(struct bpf_prog_info *info, enum dump_mode mode,
 
 		n = write(fd, buf, member_len);
 		close(fd);
-		if (n != member_len) {
+		if (n != (ssize_t)member_len) {
 			p_err("error writing output file: %s",
 			      n < 0 ? strerror(errno) : "short write");
 			return -1;
@@ -492,13 +492,13 @@ prog_dump(struct bpf_prog_info *info, enum dump_mode mode,
 			__u32 i;
 			if (info->nr_jited_ksyms) {
 				kernel_syms_load(&dd);
-				ksyms = (__u64 *) info->jited_ksyms;
+				ksyms = u64_to_ptr(info->jited_ksyms);
 			}
 
 			if (json_output)
 				jsonw_start_array(json_wtr);
 
-			lens = (__u32 *) info->jited_func_lens;
+			lens = u64_to_ptr(info->jited_func_lens);
 			for (i = 0; i < info->nr_jited_func_lens; i++) {
 				if (ksyms) {
 					sym = kernel_syms_search(&dd, ksyms[i]);
@@ -559,7 +559,7 @@ prog_dump(struct bpf_prog_info *info, enum dump_mode mode,
 	} else {
 		kernel_syms_load(&dd);
 		dd.nr_jited_ksyms = info->nr_jited_ksyms;
-		dd.jited_ksyms = (__u64 *) info->jited_ksyms;
+		dd.jited_ksyms = u64_to_ptr(info->jited_ksyms);
 		dd.btf = btf;
 		dd.func_info = func_info;
 		dd.finfo_rec_size = info->func_info_rec_size;
@@ -1681,7 +1681,7 @@ static char *profile_target_name(int tgt_fd)
 		goto out;
 	}
 
-	func_info = (struct bpf_func_info *)(info_linear->info.func_info);
+	func_info = u64_to_ptr(info_linear->info.func_info);
 	t = btf__type_by_id(btf, func_info[0].type_id);
 	if (!t) {
 		p_err("btf %d doesn't have type %d",
-- 
cgit v1.2.3


From 9028bbcc3e12510cac13a9554f1a1e39667a4387 Mon Sep 17 00:00:00 2001
From: Andrii Nakryiko <andriin@fb.com>
Date: Thu, 13 Aug 2020 13:49:38 -0700
Subject: selftest/bpf: Fix compilation warnings in 32-bit mode

Fix compilation warnings emitted when compiling selftests for 32-bit platform
(x86 in my case).

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200813204945.1020225-3-andriin@fb.com
---
 tools/testing/selftests/bpf/prog_tests/bpf_obj_id.c     | 8 ++++----
 tools/testing/selftests/bpf/prog_tests/core_extern.c    | 4 ++--
 tools/testing/selftests/bpf/prog_tests/fexit_bpf2bpf.c  | 6 +++---
 tools/testing/selftests/bpf/prog_tests/flow_dissector.c | 2 +-
 tools/testing/selftests/bpf/prog_tests/global_data.c    | 6 +++---
 tools/testing/selftests/bpf/prog_tests/prog_run_xattr.c | 2 +-
 tools/testing/selftests/bpf/prog_tests/skb_ctx.c        | 2 +-
 tools/testing/selftests/bpf/test_btf.c                  | 8 ++++----
 tools/testing/selftests/bpf/test_progs.h                | 5 +++++
 9 files changed, 24 insertions(+), 19 deletions(-)

(limited to 'tools')

diff --git a/tools/testing/selftests/bpf/prog_tests/bpf_obj_id.c b/tools/testing/selftests/bpf/prog_tests/bpf_obj_id.c
index 7afa4160416f..284d5921c345 100644
--- a/tools/testing/selftests/bpf/prog_tests/bpf_obj_id.c
+++ b/tools/testing/selftests/bpf/prog_tests/bpf_obj_id.c
@@ -159,15 +159,15 @@ void test_bpf_obj_id(void)
 		/* Check getting link info */
 		info_len = sizeof(struct bpf_link_info) * 2;
 		bzero(&link_infos[i], info_len);
-		link_infos[i].raw_tracepoint.tp_name = (__u64)&tp_name;
+		link_infos[i].raw_tracepoint.tp_name = ptr_to_u64(&tp_name);
 		link_infos[i].raw_tracepoint.tp_name_len = sizeof(tp_name);
 		err = bpf_obj_get_info_by_fd(bpf_link__fd(links[i]),
 					     &link_infos[i], &info_len);
 		if (CHECK(err ||
 			  link_infos[i].type != BPF_LINK_TYPE_RAW_TRACEPOINT ||
 			  link_infos[i].prog_id != prog_infos[i].id ||
-			  link_infos[i].raw_tracepoint.tp_name != (__u64)&tp_name ||
-			  strcmp((char *)link_infos[i].raw_tracepoint.tp_name,
+			  link_infos[i].raw_tracepoint.tp_name != ptr_to_u64(&tp_name) ||
+			  strcmp(u64_to_ptr(link_infos[i].raw_tracepoint.tp_name),
 				 "sys_enter") ||
 			  info_len != sizeof(struct bpf_link_info),
 			  "get-link-info(fd)",
@@ -178,7 +178,7 @@ void test_bpf_obj_id(void)
 			  link_infos[i].type, BPF_LINK_TYPE_RAW_TRACEPOINT,
 			  link_infos[i].id,
 			  link_infos[i].prog_id, prog_infos[i].id,
-			  (char *)link_infos[i].raw_tracepoint.tp_name,
+			  (const char *)u64_to_ptr(link_infos[i].raw_tracepoint.tp_name),
 			  "sys_enter"))
 			goto done;
 
diff --git a/tools/testing/selftests/bpf/prog_tests/core_extern.c b/tools/testing/selftests/bpf/prog_tests/core_extern.c
index b093787e9448..1931a158510e 100644
--- a/tools/testing/selftests/bpf/prog_tests/core_extern.c
+++ b/tools/testing/selftests/bpf/prog_tests/core_extern.c
@@ -159,8 +159,8 @@ void test_core_extern(void)
 		exp = (uint64_t *)&t->data;
 		for (j = 0; j < n; j++) {
 			CHECK(got[j] != exp[j], "check_res",
-			      "result #%d: expected %lx, but got %lx\n",
-			       j, exp[j], got[j]);
+			      "result #%d: expected %llx, but got %llx\n",
+			       j, (__u64)exp[j], (__u64)got[j]);
 		}
 cleanup:
 		test_core_extern__destroy(skel);
diff --git a/tools/testing/selftests/bpf/prog_tests/fexit_bpf2bpf.c b/tools/testing/selftests/bpf/prog_tests/fexit_bpf2bpf.c
index a895bfed55db..197d0d217b56 100644
--- a/tools/testing/selftests/bpf/prog_tests/fexit_bpf2bpf.c
+++ b/tools/testing/selftests/bpf/prog_tests/fexit_bpf2bpf.c
@@ -16,7 +16,7 @@ static void test_fexit_bpf2bpf_common(const char *obj_file,
 	__u32 duration = 0, retval;
 	struct bpf_map *data_map;
 	const int zero = 0;
-	u64 *result = NULL;
+	__u64 *result = NULL;
 
 	err = bpf_prog_load(target_obj_file, BPF_PROG_TYPE_UNSPEC,
 			    &pkt_obj, &pkt_fd);
@@ -29,7 +29,7 @@ static void test_fexit_bpf2bpf_common(const char *obj_file,
 
 	link = calloc(sizeof(struct bpf_link *), prog_cnt);
 	prog = calloc(sizeof(struct bpf_program *), prog_cnt);
-	result = malloc((prog_cnt + 32 /* spare */) * sizeof(u64));
+	result = malloc((prog_cnt + 32 /* spare */) * sizeof(__u64));
 	if (CHECK(!link || !prog || !result, "alloc_memory",
 		  "failed to alloc memory"))
 		goto close_prog;
@@ -72,7 +72,7 @@ static void test_fexit_bpf2bpf_common(const char *obj_file,
 		goto close_prog;
 
 	for (i = 0; i < prog_cnt; i++)
-		if (CHECK(result[i] != 1, "result", "fexit_bpf2bpf failed err %ld\n",
+		if (CHECK(result[i] != 1, "result", "fexit_bpf2bpf failed err %llu\n",
 			  result[i]))
 			goto close_prog;
 
diff --git a/tools/testing/selftests/bpf/prog_tests/flow_dissector.c b/tools/testing/selftests/bpf/prog_tests/flow_dissector.c
index f11f187990e9..cd6dc80edf18 100644
--- a/tools/testing/selftests/bpf/prog_tests/flow_dissector.c
+++ b/tools/testing/selftests/bpf/prog_tests/flow_dissector.c
@@ -591,7 +591,7 @@ void test_flow_dissector(void)
 		CHECK_ATTR(tattr.data_size_out != sizeof(flow_keys) ||
 			   err || tattr.retval != 1,
 			   tests[i].name,
-			   "err %d errno %d retval %d duration %d size %u/%lu\n",
+			   "err %d errno %d retval %d duration %d size %u/%zu\n",
 			   err, errno, tattr.retval, tattr.duration,
 			   tattr.data_size_out, sizeof(flow_keys));
 		CHECK_FLOW_KEYS(tests[i].name, flow_keys, tests[i].keys);
diff --git a/tools/testing/selftests/bpf/prog_tests/global_data.c b/tools/testing/selftests/bpf/prog_tests/global_data.c
index e3cb62b0a110..9efa7e50eab2 100644
--- a/tools/testing/selftests/bpf/prog_tests/global_data.c
+++ b/tools/testing/selftests/bpf/prog_tests/global_data.c
@@ -5,7 +5,7 @@
 static void test_global_data_number(struct bpf_object *obj, __u32 duration)
 {
 	int i, err, map_fd;
-	uint64_t num;
+	__u64 num;
 
 	map_fd = bpf_find_map(__func__, obj, "result_number");
 	if (CHECK_FAIL(map_fd < 0))
@@ -14,7 +14,7 @@ static void test_global_data_number(struct bpf_object *obj, __u32 duration)
 	struct {
 		char *name;
 		uint32_t key;
-		uint64_t num;
+		__u64 num;
 	} tests[] = {
 		{ "relocate .bss reference",     0, 0 },
 		{ "relocate .data reference",    1, 42 },
@@ -32,7 +32,7 @@ static void test_global_data_number(struct bpf_object *obj, __u32 duration)
 	for (i = 0; i < sizeof(tests) / sizeof(tests[0]); i++) {
 		err = bpf_map_lookup_elem(map_fd, &tests[i].key, &num);
 		CHECK(err || num != tests[i].num, tests[i].name,
-		      "err %d result %lx expected %lx\n",
+		      "err %d result %llx expected %llx\n",
 		      err, num, tests[i].num);
 	}
 }
diff --git a/tools/testing/selftests/bpf/prog_tests/prog_run_xattr.c b/tools/testing/selftests/bpf/prog_tests/prog_run_xattr.c
index dde2b7ae7bc9..935a294f049a 100644
--- a/tools/testing/selftests/bpf/prog_tests/prog_run_xattr.c
+++ b/tools/testing/selftests/bpf/prog_tests/prog_run_xattr.c
@@ -28,7 +28,7 @@ void test_prog_run_xattr(void)
 	      "err %d errno %d retval %d\n", err, errno, tattr.retval);
 
 	CHECK_ATTR(tattr.data_size_out != sizeof(pkt_v4), "data_size_out",
-	      "incorrect output size, want %lu have %u\n",
+	      "incorrect output size, want %zu have %u\n",
 	      sizeof(pkt_v4), tattr.data_size_out);
 
 	CHECK_ATTR(buf[5] != 0, "overflow",
diff --git a/tools/testing/selftests/bpf/prog_tests/skb_ctx.c b/tools/testing/selftests/bpf/prog_tests/skb_ctx.c
index 25de86af2d03..fafeddaad6a9 100644
--- a/tools/testing/selftests/bpf/prog_tests/skb_ctx.c
+++ b/tools/testing/selftests/bpf/prog_tests/skb_ctx.c
@@ -81,7 +81,7 @@ void test_skb_ctx(void)
 
 	CHECK_ATTR(tattr.ctx_size_out != sizeof(skb),
 		   "ctx_size_out",
-		   "incorrect output size, want %lu have %u\n",
+		   "incorrect output size, want %zu have %u\n",
 		   sizeof(skb), tattr.ctx_size_out);
 
 	for (i = 0; i < 5; i++)
diff --git a/tools/testing/selftests/bpf/test_btf.c b/tools/testing/selftests/bpf/test_btf.c
index 305fae8f80a9..c75fc6447186 100644
--- a/tools/testing/selftests/bpf/test_btf.c
+++ b/tools/testing/selftests/bpf/test_btf.c
@@ -3883,7 +3883,7 @@ static int test_big_btf_info(unsigned int test_num)
 	info_garbage.garbage = 0;
 	err = bpf_obj_get_info_by_fd(btf_fd, info, &info_len);
 	if (CHECK(err || info_len != sizeof(*info),
-		  "err:%d errno:%d info_len:%u sizeof(*info):%lu",
+		  "err:%d errno:%d info_len:%u sizeof(*info):%zu",
 		  err, errno, info_len, sizeof(*info))) {
 		err = -1;
 		goto done;
@@ -4094,7 +4094,7 @@ static int do_test_get_info(unsigned int test_num)
 	if (CHECK(err || !info.id || info_len != sizeof(info) ||
 		  info.btf_size != raw_btf_size ||
 		  (ret = memcmp(raw_btf, user_btf, expected_nbytes)),
-		  "err:%d errno:%d info.id:%u info_len:%u sizeof(info):%lu raw_btf_size:%u info.btf_size:%u expected_nbytes:%u memcmp:%d",
+		  "err:%d errno:%d info.id:%u info_len:%u sizeof(info):%zu raw_btf_size:%u info.btf_size:%u expected_nbytes:%u memcmp:%d",
 		  err, errno, info.id, info_len, sizeof(info),
 		  raw_btf_size, info.btf_size, expected_nbytes, ret)) {
 		err = -1;
@@ -4730,7 +4730,7 @@ ssize_t get_pprint_expected_line(enum pprint_mapv_kind_t mapv_kind,
 
 		nexpected_line = snprintf(expected_line, line_size,
 					  "%s%u: {%u,0,%d,0x%x,0x%x,0x%x,"
-					  "{%lu|[%u,%u,%u,%u,%u,%u,%u,%u]},%s,"
+					  "{%llu|[%u,%u,%u,%u,%u,%u,%u,%u]},%s,"
 					  "%u,0x%x,[[%d,%d],[%d,%d]]}\n",
 					  percpu_map ? "\tcpu" : "",
 					  percpu_map ? cpu : next_key,
@@ -4738,7 +4738,7 @@ ssize_t get_pprint_expected_line(enum pprint_mapv_kind_t mapv_kind,
 					  v->unused_bits2a,
 					  v->bits28,
 					  v->unused_bits2b,
-					  v->ui64,
+					  (__u64)v->ui64,
 					  v->ui8a[0], v->ui8a[1],
 					  v->ui8a[2], v->ui8a[3],
 					  v->ui8a[4], v->ui8a[5],
diff --git a/tools/testing/selftests/bpf/test_progs.h b/tools/testing/selftests/bpf/test_progs.h
index 6e09bf738473..dbb820dde138 100644
--- a/tools/testing/selftests/bpf/test_progs.h
+++ b/tools/testing/selftests/bpf/test_progs.h
@@ -135,6 +135,11 @@ static inline __u64 ptr_to_u64(const void *ptr)
 	return (__u64) (unsigned long) ptr;
 }
 
+static inline void *u64_to_ptr(__u64 ptr)
+{
+	return (void *) (unsigned long) ptr;
+}
+
 int bpf_find_map(const char *test, struct bpf_object *obj, const char *name);
 int compare_map_keys(int map1_fd, int map2_fd);
 int compare_stack_ips(int smap_fd, int amap_fd, int stack_trace_len);
-- 
cgit v1.2.3


From 15728ad3e71c120278105f20fa65b3735e715e0f Mon Sep 17 00:00:00 2001
From: Andrii Nakryiko <andriin@fb.com>
Date: Thu, 13 Aug 2020 13:49:39 -0700
Subject: libbpf: Fix BTF-defined map-in-map initialization on 32-bit host
 arches

Libbpf built in 32-bit mode should be careful about not conflating 64-bit BPF
pointers in BPF ELF file and host architecture pointers. This patch fixes
issue of incorrect initializating of map-in-map inner map slots due to such
difference.

Fixes: 646f02ffdd49 ("libbpf: Add BTF-defined map-in-map support")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200813204945.1020225-4-andriin@fb.com
---
 tools/lib/bpf/libbpf.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

(limited to 'tools')

diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c
index 0d48c18d5030..6accddaaedab 100644
--- a/tools/lib/bpf/libbpf.c
+++ b/tools/lib/bpf/libbpf.c
@@ -5195,7 +5195,8 @@ static int bpf_object__collect_st_ops_relos(struct bpf_object *obj,
 static int bpf_object__collect_map_relos(struct bpf_object *obj,
 					 GElf_Shdr *shdr, Elf_Data *data)
 {
-	int i, j, nrels, new_sz, ptr_sz = sizeof(void *);
+	const int bpf_ptr_sz = 8, host_ptr_sz = sizeof(void *);
+	int i, j, nrels, new_sz;
 	const struct btf_var_secinfo *vi = NULL;
 	const struct btf_type *sec, *var, *def;
 	const struct btf_member *member;
@@ -5244,7 +5245,7 @@ static int bpf_object__collect_map_relos(struct bpf_object *obj,
 
 			vi = btf_var_secinfos(sec) + map->btf_var_idx;
 			if (vi->offset <= rel.r_offset &&
-			    rel.r_offset + sizeof(void *) <= vi->offset + vi->size)
+			    rel.r_offset + bpf_ptr_sz <= vi->offset + vi->size)
 				break;
 		}
 		if (j == obj->nr_maps) {
@@ -5280,17 +5281,20 @@ static int bpf_object__collect_map_relos(struct bpf_object *obj,
 			return -EINVAL;
 
 		moff = rel.r_offset - vi->offset - moff;
-		if (moff % ptr_sz)
+		/* here we use BPF pointer size, which is always 64 bit, as we
+		 * are parsing ELF that was built for BPF target
+		 */
+		if (moff % bpf_ptr_sz)
 			return -EINVAL;
-		moff /= ptr_sz;
+		moff /= bpf_ptr_sz;
 		if (moff >= map->init_slots_sz) {
 			new_sz = moff + 1;
-			tmp = realloc(map->init_slots, new_sz * ptr_sz);
+			tmp = realloc(map->init_slots, new_sz * host_ptr_sz);
 			if (!tmp)
 				return -ENOMEM;
 			map->init_slots = tmp;
 			memset(map->init_slots + map->init_slots_sz, 0,
-			       (new_sz - map->init_slots_sz) * ptr_sz);
+			       (new_sz - map->init_slots_sz) * host_ptr_sz);
 			map->init_slots_sz = new_sz;
 		}
 		map->init_slots[moff] = targ_map;
-- 
cgit v1.2.3


From 44ad23dfbccbcd26d6ca504eba1ac55755864969 Mon Sep 17 00:00:00 2001
From: Andrii Nakryiko <andriin@fb.com>
Date: Thu, 13 Aug 2020 13:49:40 -0700
Subject: libbpf: Handle BTF pointer sizes more carefully

With libbpf and BTF it is pretty common to have libbpf built for one
architecture, while BTF information was generated for a different architecture
(typically, but not always, BPF). In such case, the size of a pointer might
differ betweem architectures. libbpf previously was always making an
assumption that pointer size for BTF is the same as native architecture
pointer size, but that breaks for cases where libbpf is built as 32-bit
library, while BTF is for 64-bit architecture.

To solve this, add heuristic to determine pointer size by searching for `long`
or `unsigned long` integer type and using its size as a pointer size. Also,
allow to override the pointer size with a new API btf__set_pointer_size(), for
cases where application knows which pointer size should be used. User
application can check what libbpf "guessed" by looking at the result of
btf__pointer_size(). If it's not 0, then libbpf successfully determined a
pointer size, otherwise native arch pointer size will be used.

For cases where BTF is parsed from ELF file, use ELF's class (32-bit or
64-bit) to determine pointer size.

Fixes: 8a138aed4a80 ("bpf: btf: Add BTF support to libbpf")
Fixes: 351131b51c7a ("libbpf: add btf_dump API for BTF-to-C conversion")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200813204945.1020225-5-andriin@fb.com
---
 tools/lib/bpf/btf.c      | 83 ++++++++++++++++++++++++++++++++++++++++++++++--
 tools/lib/bpf/btf.h      |  2 ++
 tools/lib/bpf/btf_dump.c |  4 ++-
 tools/lib/bpf/libbpf.map |  2 ++
 4 files changed, 87 insertions(+), 4 deletions(-)

(limited to 'tools')

diff --git a/tools/lib/bpf/btf.c b/tools/lib/bpf/btf.c
index 4843e44916f7..7dfca7016aaa 100644
--- a/tools/lib/bpf/btf.c
+++ b/tools/lib/bpf/btf.c
@@ -41,6 +41,7 @@ struct btf {
 	__u32 types_size;
 	__u32 data_size;
 	int fd;
+	int ptr_sz;
 };
 
 static inline __u64 ptr_to_u64(const void *ptr)
@@ -221,6 +222,70 @@ const struct btf_type *btf__type_by_id(const struct btf *btf, __u32 type_id)
 	return btf->types[type_id];
 }
 
+static int determine_ptr_size(const struct btf *btf)
+{
+	const struct btf_type *t;
+	const char *name;
+	int i;
+
+	for (i = 1; i <= btf->nr_types; i++) {
+		t = btf__type_by_id(btf, i);
+		if (!btf_is_int(t))
+			continue;
+
+		name = btf__name_by_offset(btf, t->name_off);
+		if (!name)
+			continue;
+
+		if (strcmp(name, "long int") == 0 ||
+		    strcmp(name, "long unsigned int") == 0) {
+			if (t->size != 4 && t->size != 8)
+				continue;
+			return t->size;
+		}
+	}
+
+	return -1;
+}
+
+static size_t btf_ptr_sz(const struct btf *btf)
+{
+	if (!btf->ptr_sz)
+		((struct btf *)btf)->ptr_sz = determine_ptr_size(btf);
+	return btf->ptr_sz < 0 ? sizeof(void *) : btf->ptr_sz;
+}
+
+/* Return pointer size this BTF instance assumes. The size is heuristically
+ * determined by looking for 'long' or 'unsigned long' integer type and
+ * recording its size in bytes. If BTF type information doesn't have any such
+ * type, this function returns 0. In the latter case, native architecture's
+ * pointer size is assumed, so will be either 4 or 8, depending on
+ * architecture that libbpf was compiled for. It's possible to override
+ * guessed value by using btf__set_pointer_size() API.
+ */
+size_t btf__pointer_size(const struct btf *btf)
+{
+	if (!btf->ptr_sz)
+		((struct btf *)btf)->ptr_sz = determine_ptr_size(btf);
+
+	if (btf->ptr_sz < 0)
+		/* not enough BTF type info to guess */
+		return 0;
+
+	return btf->ptr_sz;
+}
+
+/* Override or set pointer size in bytes. Only values of 4 and 8 are
+ * supported.
+ */
+int btf__set_pointer_size(struct btf *btf, size_t ptr_sz)
+{
+	if (ptr_sz != 4 && ptr_sz != 8)
+		return -EINVAL;
+	btf->ptr_sz = ptr_sz;
+	return 0;
+}
+
 static bool btf_type_is_void(const struct btf_type *t)
 {
 	return t == &btf_void || btf_is_fwd(t);
@@ -253,7 +318,7 @@ __s64 btf__resolve_size(const struct btf *btf, __u32 type_id)
 			size = t->size;
 			goto done;
 		case BTF_KIND_PTR:
-			size = sizeof(void *);
+			size = btf_ptr_sz(btf);
 			goto done;
 		case BTF_KIND_TYPEDEF:
 		case BTF_KIND_VOLATILE:
@@ -293,9 +358,9 @@ int btf__align_of(const struct btf *btf, __u32 id)
 	switch (kind) {
 	case BTF_KIND_INT:
 	case BTF_KIND_ENUM:
-		return min(sizeof(void *), (size_t)t->size);
+		return min(btf_ptr_sz(btf), (size_t)t->size);
 	case BTF_KIND_PTR:
-		return sizeof(void *);
+		return btf_ptr_sz(btf);
 	case BTF_KIND_TYPEDEF:
 	case BTF_KIND_VOLATILE:
 	case BTF_KIND_CONST:
@@ -533,6 +598,18 @@ struct btf *btf__parse_elf(const char *path, struct btf_ext **btf_ext)
 	if (IS_ERR(btf))
 		goto done;
 
+	switch (gelf_getclass(elf)) {
+	case ELFCLASS32:
+		btf__set_pointer_size(btf, 4);
+		break;
+	case ELFCLASS64:
+		btf__set_pointer_size(btf, 8);
+		break;
+	default:
+		pr_warn("failed to get ELF class (bitness) for %s\n", path);
+		break;
+	}
+
 	if (btf_ext && btf_ext_data) {
 		*btf_ext = btf_ext__new(btf_ext_data->d_buf,
 					btf_ext_data->d_size);
diff --git a/tools/lib/bpf/btf.h b/tools/lib/bpf/btf.h
index f4a1a1d2b9a3..1ca14448df4c 100644
--- a/tools/lib/bpf/btf.h
+++ b/tools/lib/bpf/btf.h
@@ -76,6 +76,8 @@ LIBBPF_API __s32 btf__find_by_name_kind(const struct btf *btf,
 LIBBPF_API __u32 btf__get_nr_types(const struct btf *btf);
 LIBBPF_API const struct btf_type *btf__type_by_id(const struct btf *btf,
 						  __u32 id);
+LIBBPF_API size_t btf__pointer_size(const struct btf *btf);
+LIBBPF_API int btf__set_pointer_size(struct btf *btf, size_t ptr_sz);
 LIBBPF_API __s64 btf__resolve_size(const struct btf *btf, __u32 type_id);
 LIBBPF_API int btf__resolve_type(const struct btf *btf, __u32 type_id);
 LIBBPF_API int btf__align_of(const struct btf *btf, __u32 id);
diff --git a/tools/lib/bpf/btf_dump.c b/tools/lib/bpf/btf_dump.c
index ac81f3f8957a..fe39bd774697 100644
--- a/tools/lib/bpf/btf_dump.c
+++ b/tools/lib/bpf/btf_dump.c
@@ -61,6 +61,7 @@ struct btf_dump {
 	const struct btf_ext *btf_ext;
 	btf_dump_printf_fn_t printf_fn;
 	struct btf_dump_opts opts;
+	int ptr_sz;
 	bool strip_mods;
 
 	/* per-type auxiliary state */
@@ -139,6 +140,7 @@ struct btf_dump *btf_dump__new(const struct btf *btf,
 	d->btf_ext = btf_ext;
 	d->printf_fn = printf_fn;
 	d->opts.ctx = opts ? opts->ctx : NULL;
+	d->ptr_sz = btf__pointer_size(btf) ? : sizeof(void *);
 
 	d->type_names = hashmap__new(str_hash_fn, str_equal_fn, NULL);
 	if (IS_ERR(d->type_names)) {
@@ -804,7 +806,7 @@ static void btf_dump_emit_bit_padding(const struct btf_dump *d,
 				      int align, int lvl)
 {
 	int off_diff = m_off - cur_off;
-	int ptr_bits = sizeof(void *) * 8;
+	int ptr_bits = d->ptr_sz * 8;
 
 	if (off_diff <= 0)
 		/* no gap */
diff --git a/tools/lib/bpf/libbpf.map b/tools/lib/bpf/libbpf.map
index 0c4722bfdd0a..e35bd6cdbdbf 100644
--- a/tools/lib/bpf/libbpf.map
+++ b/tools/lib/bpf/libbpf.map
@@ -295,5 +295,7 @@ LIBBPF_0.1.0 {
 		bpf_program__set_sk_lookup;
 		btf__parse;
 		btf__parse_raw;
+		btf__pointer_size;
 		btf__set_fd;
+		btf__set_pointer_size;
 } LIBBPF_0.0.9;
-- 
cgit v1.2.3


From eed7818adf03e874994b966aa33bc00204dd275a Mon Sep 17 00:00:00 2001
From: Andrii Nakryiko <andriin@fb.com>
Date: Thu, 13 Aug 2020 13:49:41 -0700
Subject: selftests/bpf: Fix btf_dump test cases on 32-bit arches

Fix btf_dump test cases by hard-coding BPF's pointer size of 8 bytes for cases
where it's impossible to deterimne the pointer size (no long type in BTF). In
cases where it's known, validate libbpf correctly determines it as 8.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200813204945.1020225-6-andriin@fb.com
---
 tools/testing/selftests/bpf/prog_tests/btf_dump.c | 27 +++++++++++++++++------
 1 file changed, 20 insertions(+), 7 deletions(-)

(limited to 'tools')

diff --git a/tools/testing/selftests/bpf/prog_tests/btf_dump.c b/tools/testing/selftests/bpf/prog_tests/btf_dump.c
index cb33a7ee4e04..39fb81d9daeb 100644
--- a/tools/testing/selftests/bpf/prog_tests/btf_dump.c
+++ b/tools/testing/selftests/bpf/prog_tests/btf_dump.c
@@ -12,15 +12,16 @@ void btf_dump_printf(void *ctx, const char *fmt, va_list args)
 static struct btf_dump_test_case {
 	const char *name;
 	const char *file;
+	bool known_ptr_sz;
 	struct btf_dump_opts opts;
 } btf_dump_test_cases[] = {
-	{"btf_dump: syntax", "btf_dump_test_case_syntax", {}},
-	{"btf_dump: ordering", "btf_dump_test_case_ordering", {}},
-	{"btf_dump: padding", "btf_dump_test_case_padding", {}},
-	{"btf_dump: packing", "btf_dump_test_case_packing", {}},
-	{"btf_dump: bitfields", "btf_dump_test_case_bitfields", {}},
-	{"btf_dump: multidim", "btf_dump_test_case_multidim", {}},
-	{"btf_dump: namespacing", "btf_dump_test_case_namespacing", {}},
+	{"btf_dump: syntax", "btf_dump_test_case_syntax", true, {}},
+	{"btf_dump: ordering", "btf_dump_test_case_ordering", false, {}},
+	{"btf_dump: padding", "btf_dump_test_case_padding", true, {}},
+	{"btf_dump: packing", "btf_dump_test_case_packing", true, {}},
+	{"btf_dump: bitfields", "btf_dump_test_case_bitfields", true, {}},
+	{"btf_dump: multidim", "btf_dump_test_case_multidim", false, {}},
+	{"btf_dump: namespacing", "btf_dump_test_case_namespacing", false, {}},
 };
 
 static int btf_dump_all_types(const struct btf *btf,
@@ -62,6 +63,18 @@ static int test_btf_dump_case(int n, struct btf_dump_test_case *t)
 		goto done;
 	}
 
+	/* tests with t->known_ptr_sz have no "long" or "unsigned long" type,
+	 * so it's impossible to determine correct pointer size; but if they
+	 * do, it should be 8 regardless of host architecture, becaues BPF
+	 * target is always 64-bit
+	 */
+	if (!t->known_ptr_sz) {
+		btf__set_pointer_size(btf, 8);
+	} else {
+		CHECK(btf__pointer_size(btf) != 8, "ptr_sz", "exp %d, got %zu\n",
+		      8, btf__pointer_size(btf));
+	}
+
 	snprintf(out_file, sizeof(out_file), "/tmp/%s.output.XXXXXX", t->file);
 	fd = mkstemp(out_file);
 	if (CHECK(fd < 0, "create_tmp", "failed to create file: %d\n", fd)) {
-- 
cgit v1.2.3


From 4c01925f583eaa7d9d003dc87a4b75b8140b4ff6 Mon Sep 17 00:00:00 2001
From: Andrii Nakryiko <andriin@fb.com>
Date: Thu, 13 Aug 2020 13:49:42 -0700
Subject: libbpf: Enforce 64-bitness of BTF for BPF object files

BPF object files are always targeting 64-bit BPF target architecture, so
enforce that at BTF level as well.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200813204945.1020225-7-andriin@fb.com
---
 tools/lib/bpf/libbpf.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'tools')

diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c
index 6accddaaedab..5d20b2da4427 100644
--- a/tools/lib/bpf/libbpf.c
+++ b/tools/lib/bpf/libbpf.c
@@ -2434,6 +2434,8 @@ static int bpf_object__init_btf(struct bpf_object *obj,
 				BTF_ELF_SEC, err);
 			goto out;
 		}
+		/* enforce 8-byte pointers for BPF-targeted BTFs */
+		btf__set_pointer_size(obj->btf, 8);
 		err = 0;
 	}
 	if (btf_ext_data) {
@@ -2542,6 +2544,8 @@ static int bpf_object__sanitize_and_load_btf(struct bpf_object *obj)
 		if (IS_ERR(kern_btf))
 			return PTR_ERR(kern_btf);
 
+		/* enforce 8-byte pointers for BPF-targeted BTFs */
+		btf__set_pointer_size(obj->btf, 8);
 		bpf_object__sanitize_btf(obj, kern_btf);
 	}
 
-- 
cgit v1.2.3


From 5705d705832f74395c5465ce93192688f543006a Mon Sep 17 00:00:00 2001
From: Andrii Nakryiko <andriin@fb.com>
Date: Thu, 13 Aug 2020 13:49:43 -0700
Subject: selftests/bpf: Correct various core_reloc 64-bit assumptions

Ensure that types are memory layout- and field alignment-compatible regardless
of 32/64-bitness mix of libbpf and BPF architecture.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200813204945.1020225-8-andriin@fb.com
---
 .../testing/selftests/bpf/prog_tests/core_reloc.c  | 20 +++----
 .../testing/selftests/bpf/progs/core_reloc_types.h | 69 ++++++++++++----------
 2 files changed, 47 insertions(+), 42 deletions(-)

(limited to 'tools')

diff --git a/tools/testing/selftests/bpf/prog_tests/core_reloc.c b/tools/testing/selftests/bpf/prog_tests/core_reloc.c
index 084ed26a7d78..a54eafc5e4b3 100644
--- a/tools/testing/selftests/bpf/prog_tests/core_reloc.c
+++ b/tools/testing/selftests/bpf/prog_tests/core_reloc.c
@@ -237,8 +237,8 @@
 		.union_sz = sizeof(((type *)0)->union_field),		\
 		.arr_sz = sizeof(((type *)0)->arr_field),		\
 		.arr_elem_sz = sizeof(((type *)0)->arr_field[0]),	\
-		.ptr_sz = sizeof(((type *)0)->ptr_field),		\
-		.enum_sz = sizeof(((type *)0)->enum_field),	\
+		.ptr_sz = 8, /* always 8-byte pointer for BPF */	\
+		.enum_sz = sizeof(((type *)0)->enum_field),		\
 	}
 
 #define SIZE_CASE(name) {						\
@@ -432,20 +432,20 @@ static struct core_reloc_test_case test_cases[] = {
 		.sb4 = -1,
 		.sb20 = -0x17654321,
 		.u32 = 0xBEEF,
-		.s32 = -0x3FEDCBA987654321,
+		.s32 = -0x3FEDCBA987654321LL,
 	}),
 	BITFIELDS_CASE(bitfields___bitfield_vs_int, {
-		.ub1 = 0xFEDCBA9876543210,
+		.ub1 = 0xFEDCBA9876543210LL,
 		.ub2 = 0xA6,
-		.ub7 = -0x7EDCBA987654321,
-		.sb4 = -0x6123456789ABCDE,
-		.sb20 = 0xD00D,
+		.ub7 = -0x7EDCBA987654321LL,
+		.sb4 = -0x6123456789ABCDELL,
+		.sb20 = 0xD00DLL,
 		.u32 = -0x76543,
-		.s32 = 0x0ADEADBEEFBADB0B,
+		.s32 = 0x0ADEADBEEFBADB0BLL,
 	}),
 	BITFIELDS_CASE(bitfields___just_big_enough, {
-		.ub1 = 0xF,
-		.ub2 = 0x0812345678FEDCBA,
+		.ub1 = 0xFLL,
+		.ub2 = 0x0812345678FEDCBALL,
 	}),
 	BITFIELDS_ERR_CASE(bitfields___err_too_big_bitfield),
 
diff --git a/tools/testing/selftests/bpf/progs/core_reloc_types.h b/tools/testing/selftests/bpf/progs/core_reloc_types.h
index 34d84717c946..69139ed66216 100644
--- a/tools/testing/selftests/bpf/progs/core_reloc_types.h
+++ b/tools/testing/selftests/bpf/progs/core_reloc_types.h
@@ -1,5 +1,10 @@
 #include <stdint.h>
 #include <stdbool.h>
+
+void preserce_ptr_sz_fn(long x) {}
+
+#define __bpf_aligned __attribute__((aligned(8)))
+
 /*
  * KERNEL
  */
@@ -444,51 +449,51 @@ struct core_reloc_primitives {
 	char a;
 	int b;
 	enum core_reloc_primitives_enum c;
-	void *d;
-	int (*f)(const char *);
+	void *d __bpf_aligned;
+	int (*f)(const char *) __bpf_aligned;
 };
 
 struct core_reloc_primitives___diff_enum_def {
 	char a;
 	int b;
-	void *d;
-	int (*f)(const char *);
+	void *d __bpf_aligned;
+	int (*f)(const char *) __bpf_aligned;
 	enum {
 		X = 100,
 		Y = 200,
-	} c; /* inline enum def with differing set of values */
+	} c __bpf_aligned; /* inline enum def with differing set of values */
 };
 
 struct core_reloc_primitives___diff_func_proto {
-	void (*f)(int); /* incompatible function prototype */
-	void *d;
-	enum core_reloc_primitives_enum c;
+	void (*f)(int) __bpf_aligned; /* incompatible function prototype */
+	void *d __bpf_aligned;
+	enum core_reloc_primitives_enum c __bpf_aligned;
 	int b;
 	char a;
 };
 
 struct core_reloc_primitives___diff_ptr_type {
-	const char * const d; /* different pointee type + modifiers */
-	char a;
+	const char * const d __bpf_aligned; /* different pointee type + modifiers */
+	char a __bpf_aligned;
 	int b;
 	enum core_reloc_primitives_enum c;
-	int (*f)(const char *);
+	int (*f)(const char *) __bpf_aligned;
 };
 
 struct core_reloc_primitives___err_non_enum {
 	char a[1];
 	int b;
 	int c; /* int instead of enum */
-	void *d;
-	int (*f)(const char *);
+	void *d __bpf_aligned;
+	int (*f)(const char *) __bpf_aligned;
 };
 
 struct core_reloc_primitives___err_non_int {
 	char a[1];
-	int *b; /* ptr instead of int */
-	enum core_reloc_primitives_enum c;
-	void *d;
-	int (*f)(const char *);
+	int *b __bpf_aligned; /* ptr instead of int */
+	enum core_reloc_primitives_enum c __bpf_aligned;
+	void *d __bpf_aligned;
+	int (*f)(const char *) __bpf_aligned;
 };
 
 struct core_reloc_primitives___err_non_ptr {
@@ -496,7 +501,7 @@ struct core_reloc_primitives___err_non_ptr {
 	int b;
 	enum core_reloc_primitives_enum c;
 	int d; /* int instead of ptr */
-	int (*f)(const char *);
+	int (*f)(const char *) __bpf_aligned;
 };
 
 /*
@@ -507,7 +512,7 @@ struct core_reloc_mods_output {
 };
 
 typedef const int int_t;
-typedef const char *char_ptr_t;
+typedef const char *char_ptr_t __bpf_aligned;
 typedef const int arr_t[7];
 
 struct core_reloc_mods_substruct {
@@ -523,9 +528,9 @@ typedef struct {
 struct core_reloc_mods {
 	int a;
 	int_t b;
-	char *c;
+	char *c __bpf_aligned;
 	char_ptr_t d;
-	int e[3];
+	int e[3] __bpf_aligned;
 	arr_t f;
 	struct core_reloc_mods_substruct g;
 	core_reloc_mods_substruct_t h;
@@ -535,9 +540,9 @@ struct core_reloc_mods {
 struct core_reloc_mods___mod_swap {
 	int b;
 	int_t a;
-	char *d;
+	char *d __bpf_aligned;
 	char_ptr_t c;
-	int f[3];
+	int f[3] __bpf_aligned;
 	arr_t e;
 	struct {
 		int y;
@@ -555,7 +560,7 @@ typedef arr1_t arr2_t;
 typedef arr2_t arr3_t;
 typedef arr3_t arr4_t;
 
-typedef const char * const volatile fancy_char_ptr_t;
+typedef const char * const volatile fancy_char_ptr_t __bpf_aligned;
 
 typedef core_reloc_mods_substruct_t core_reloc_mods_substruct_tt;
 
@@ -567,7 +572,7 @@ struct core_reloc_mods___typedefs {
 	arr4_t e;
 	fancy_char_ptr_t d;
 	fancy_char_ptr_t c;
-	int3_t b;
+	int3_t b __bpf_aligned;
 	int3_t a;
 };
 
@@ -739,19 +744,19 @@ struct core_reloc_bitfields___bit_sz_change {
 	int8_t		sb4: 1;		/*  4 ->  1 */
 	int32_t		sb20: 30;	/* 20 -> 30 */
 	/* non-bitfields */
-	uint16_t	u32;		/* 32 -> 16 */
-	int64_t		s32;		/* 32 -> 64 */
+	uint16_t	u32;			/* 32 -> 16 */
+	int64_t		s32 __bpf_aligned;	/* 32 -> 64 */
 };
 
 /* turn bitfield into non-bitfield and vice versa */
 struct core_reloc_bitfields___bitfield_vs_int {
 	uint64_t	ub1;		/*  3 -> 64 non-bitfield */
 	uint8_t		ub2;		/* 20 ->  8 non-bitfield */
-	int64_t		ub7;		/*  7 -> 64 non-bitfield signed */
-	int64_t		sb4;		/*  4 -> 64 non-bitfield signed */
-	uint64_t	sb20;		/* 20 -> 16 non-bitfield unsigned */
-	int32_t		u32: 20;	/* 32 non-bitfield -> 20 bitfield */
-	uint64_t	s32: 60;	/* 32 non-bitfield -> 60 bitfield */
+	int64_t		ub7 __bpf_aligned;	/*  7 -> 64 non-bitfield signed */
+	int64_t		sb4 __bpf_aligned;	/*  4 -> 64 non-bitfield signed */
+	uint64_t	sb20 __bpf_aligned;	/* 20 -> 16 non-bitfield unsigned */
+	int32_t		u32: 20;		/* 32 non-bitfield -> 20 bitfield */
+	uint64_t	s32: 60 __bpf_aligned;	/* 32 non-bitfield -> 60 bitfield */
 };
 
 struct core_reloc_bitfields___just_big_enough {
-- 
cgit v1.2.3


From 0f993845d723c87656552837b412994d6086f086 Mon Sep 17 00:00:00 2001
From: Andrii Nakryiko <andriin@fb.com>
Date: Thu, 13 Aug 2020 13:49:44 -0700
Subject: tools/bpftool: Generate data section struct with conservative
 alignment

The comment in the code describes this in good details. Generate such a memory
layout that would work both on 32-bit and 64-bit architectures for user-space.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200813204945.1020225-9-andriin@fb.com
---
 tools/bpf/bpftool/gen.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

(limited to 'tools')

diff --git a/tools/bpf/bpftool/gen.c b/tools/bpf/bpftool/gen.c
index db80e836816e..f61184653633 100644
--- a/tools/bpf/bpftool/gen.c
+++ b/tools/bpf/bpftool/gen.c
@@ -143,6 +143,20 @@ static int codegen_datasec_def(struct bpf_object *obj,
 			      var_name, align);
 			return -EINVAL;
 		}
+		/* Assume 32-bit architectures when generating data section
+		 * struct memory layout. Given bpftool can't know which target
+		 * host architecture it's emitting skeleton for, we need to be
+		 * conservative and assume 32-bit one to ensure enough padding
+		 * bytes are generated for pointer and long types. This will
+		 * still work correctly for 64-bit architectures, because in
+		 * the worst case we'll generate unnecessary padding field,
+		 * which on 64-bit architectures is not strictly necessary and
+		 * would be handled by natural 8-byte alignment. But it still
+		 * will be a correct memory layout, based on recorded offsets
+		 * in BTF.
+		 */
+		if (align > 4)
+			align = 4;
 
 		align_off = (off + align - 1) / align * align;
 		if (align_off != need_off) {
-- 
cgit v1.2.3


From 4fccd2ff74fbad222c69c7604307e0773a37ab8d Mon Sep 17 00:00:00 2001
From: Andrii Nakryiko <andriin@fb.com>
Date: Thu, 13 Aug 2020 13:49:45 -0700
Subject: selftests/bpf: Make test_varlen work with 32-bit user-space arch

Despite bpftool generating data section memory layout that will work for
32-bit architectures on user-space side, BPF programs should be careful to not
use ambiguous types like `long`, which have different size in 32-bit and
64-bit environments. Fix that in test by using __u64 explicitly, which is
a recommended approach anyway.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200813204945.1020225-10-andriin@fb.com
---
 tools/testing/selftests/bpf/prog_tests/varlen.c | 8 ++++----
 tools/testing/selftests/bpf/progs/test_varlen.c | 6 +++---
 2 files changed, 7 insertions(+), 7 deletions(-)

(limited to 'tools')

diff --git a/tools/testing/selftests/bpf/prog_tests/varlen.c b/tools/testing/selftests/bpf/prog_tests/varlen.c
index c75525eab02c..dd324b4933db 100644
--- a/tools/testing/selftests/bpf/prog_tests/varlen.c
+++ b/tools/testing/selftests/bpf/prog_tests/varlen.c
@@ -44,25 +44,25 @@ void test_varlen(void)
 	CHECK_VAL(bss->payload1_len2, size2);
 	CHECK_VAL(bss->total1, size1 + size2);
 	CHECK(memcmp(bss->payload1, exp_str, size1 + size2), "content_check",
-	      "doesn't match!");
+	      "doesn't match!\n");
 
 	CHECK_VAL(data->payload2_len1, size1);
 	CHECK_VAL(data->payload2_len2, size2);
 	CHECK_VAL(data->total2, size1 + size2);
 	CHECK(memcmp(data->payload2, exp_str, size1 + size2), "content_check",
-	      "doesn't match!");
+	      "doesn't match!\n");
 
 	CHECK_VAL(data->payload3_len1, size1);
 	CHECK_VAL(data->payload3_len2, size2);
 	CHECK_VAL(data->total3, size1 + size2);
 	CHECK(memcmp(data->payload3, exp_str, size1 + size2), "content_check",
-	      "doesn't match!");
+	      "doesn't match!\n");
 
 	CHECK_VAL(data->payload4_len1, size1);
 	CHECK_VAL(data->payload4_len2, size2);
 	CHECK_VAL(data->total4, size1 + size2);
 	CHECK(memcmp(data->payload4, exp_str, size1 + size2), "content_check",
-	      "doesn't match!");
+	      "doesn't match!\n");
 cleanup:
 	test_varlen__destroy(skel);
 }
diff --git a/tools/testing/selftests/bpf/progs/test_varlen.c b/tools/testing/selftests/bpf/progs/test_varlen.c
index cd4b72c55dfe..913acdffd90f 100644
--- a/tools/testing/selftests/bpf/progs/test_varlen.c
+++ b/tools/testing/selftests/bpf/progs/test_varlen.c
@@ -15,9 +15,9 @@ int test_pid = 0;
 bool capture = false;
 
 /* .bss */
-long payload1_len1 = 0;
-long payload1_len2 = 0;
-long total1 = 0;
+__u64 payload1_len1 = 0;
+__u64 payload1_len2 = 0;
+__u64 total1 = 0;
 char payload1[MAX_LEN + MAX_LEN] = {};
 
 /* .data */
-- 
cgit v1.2.3


From 98b0bf02738004829d7e26d6cb47b2e469aaba86 Mon Sep 17 00:00:00 2001
From: Yang Weijiang <weijiang.yang@intel.com>
Date: Fri, 14 Aug 2020 21:21:05 +0800
Subject: selftests: kvm: Use a shorter encoding to clear RAX

If debug_regs.c is built with newer binutils, the resulting binary is "optimized"
by the assembler:

asm volatile("ss_start: "
             "xor %%rax,%%rax\n\t"
             "cpuid\n\t"
             "movl $0x1a0,%%ecx\n\t"
             "rdmsr\n\t"
             : : : "rax", "ecx");

is translated to :

  000000000040194e <ss_start>:
  40194e:       31 c0                   xor    %eax,%eax     <----- rax->eax?
  401950:       0f a2                   cpuid
  401952:       b9 a0 01 00 00          mov    $0x1a0,%ecx
  401957:       0f 32                   rdmsr

As you can see rax is replaced with eax in target binary code.
This causes a difference is the length of xor instruction (2 Byte vs 3 Byte),
and makes the hard-coded instruction length check fail:

        /* Instruction lengths starting at ss_start */
        int ss_size[4] = {
                3,              /* xor */   <-------- 2 or 3?
                2,              /* cpuid */
                5,              /* mov */
                2,              /* rdmsr */
        };

Encode the shorter version directly and, while at it, fix the "clobbers"
of the asm.

Cc: stable@vger.kernel.org
Signed-off-by: Yang Weijiang <weijiang.yang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 tools/testing/selftests/kvm/x86_64/debug_regs.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'tools')

diff --git a/tools/testing/selftests/kvm/x86_64/debug_regs.c b/tools/testing/selftests/kvm/x86_64/debug_regs.c
index 8162c58a1234..b8d14f9db5f9 100644
--- a/tools/testing/selftests/kvm/x86_64/debug_regs.c
+++ b/tools/testing/selftests/kvm/x86_64/debug_regs.c
@@ -40,11 +40,11 @@ static void guest_code(void)
 
 	/* Single step test, covers 2 basic instructions and 2 emulated */
 	asm volatile("ss_start: "
-		     "xor %%rax,%%rax\n\t"
+		     "xor %%eax,%%eax\n\t"
 		     "cpuid\n\t"
 		     "movl $0x1a0,%%ecx\n\t"
 		     "rdmsr\n\t"
-		     : : : "rax", "ecx");
+		     : : : "eax", "ebx", "ecx", "edx");
 
 	/* DR6.BD test */
 	asm volatile("bd_start: mov %%dr0, %%rax" : : : "rax");
-- 
cgit v1.2.3


From bcf7ddb0186d366f761f86196b480ea6dd2dc18c Mon Sep 17 00:00:00 2001
From: David Ahern <dsahern@kernel.org>
Date: Mon, 17 Aug 2020 09:43:33 -0600
Subject: selftests: disable rp_filter for icmp_redirect.sh

h1 is initially configured to reach h2 via r1 rather than the
more direct path through r2. If rp_filter is set and inherited
for r2, forwarding fails since the source address of h1 is
reachable from eth0 vs the packet coming to it via r1 and eth1.
Since rp_filter setting affects the test, explicitly reset it.

Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 tools/testing/selftests/net/icmp_redirect.sh | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'tools')

diff --git a/tools/testing/selftests/net/icmp_redirect.sh b/tools/testing/selftests/net/icmp_redirect.sh
index 18c5de53558a..bf361f30d6ef 100755
--- a/tools/testing/selftests/net/icmp_redirect.sh
+++ b/tools/testing/selftests/net/icmp_redirect.sh
@@ -180,6 +180,8 @@ setup()
 			;;
 		r[12]) ip netns exec $ns sysctl -q -w net.ipv4.ip_forward=1
 		       ip netns exec $ns sysctl -q -w net.ipv4.conf.all.send_redirects=1
+		       ip netns exec $ns sysctl -q -w net.ipv4.conf.default.rp_filter=0
+		       ip netns exec $ns sysctl -q -w net.ipv4.conf.all.rp_filter=0
 
 		       ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=1
 		       ip netns exec $ns sysctl -q -w net.ipv6.route.mtu_expires=10
-- 
cgit v1.2.3


From 3fb1a96a91120877488071a167d26d76be4be977 Mon Sep 17 00:00:00 2001
From: Andrii Nakryiko <andriin@fb.com>
Date: Tue, 18 Aug 2020 09:44:56 -0700
Subject: libbpf: Fix build on ppc64le architecture
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

On ppc64le we get the following warning:

  In file included from btf_dump.c:16:0:
  btf_dump.c: In function ‘btf_dump_emit_struct_def’:
  ../include/linux/kernel.h:20:17: error: comparison of distinct pointer types lacks a cast [-Werror]
    (void) (&_max1 == &_max2);  \
                   ^
  btf_dump.c:882:11: note: in expansion of macro ‘max’
      m_sz = max(0LL, btf__resolve_size(d->btf, m->type));
             ^~~

Fix by explicitly casting to __s64, which is a return type from
btf__resolve_size().

Fixes: 702eddc77a90 ("libbpf: Handle GCC built-in types for Arm NEON")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200818164456.1181661-1-andriin@fb.com
---
 tools/lib/bpf/btf_dump.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'tools')

diff --git a/tools/lib/bpf/btf_dump.c b/tools/lib/bpf/btf_dump.c
index fe39bd774697..57c00fa63932 100644
--- a/tools/lib/bpf/btf_dump.c
+++ b/tools/lib/bpf/btf_dump.c
@@ -879,7 +879,7 @@ static void btf_dump_emit_struct_def(struct btf_dump *d,
 			btf_dump_printf(d, ": %d", m_sz);
 			off = m_off + m_sz;
 		} else {
-			m_sz = max(0LL, btf__resolve_size(d->btf, m->type));
+			m_sz = max((__s64)0, btf__resolve_size(d->btf, m->type));
 			off = m_off + m_sz * 8;
 		}
 		btf_dump_printf(d, ";");
-- 
cgit v1.2.3


From 00fa1d83a8b50351c830521d00135e823c46e7d0 Mon Sep 17 00:00:00 2001
From: Yonghong Song <yhs@fb.com>
Date: Tue, 18 Aug 2020 15:23:12 -0700
Subject: bpftool: Handle EAGAIN error code properly in pids collection

When the error code is EAGAIN, the kernel signals the user
space should retry the read() operation for bpf iterators.
Let us do it.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200818222312.2181675-1-yhs@fb.com
---
 tools/bpf/bpftool/pids.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'tools')

diff --git a/tools/bpf/bpftool/pids.c b/tools/bpf/bpftool/pids.c
index e3b116325403..df7d8ec76036 100644
--- a/tools/bpf/bpftool/pids.c
+++ b/tools/bpf/bpftool/pids.c
@@ -134,6 +134,8 @@ int build_obj_refs_table(struct obj_refs_table *table, enum bpf_obj_type type)
 	while (true) {
 		ret = read(fd, buf, sizeof(buf));
 		if (ret < 0) {
+			if (errno == EAGAIN)
+				continue;
 			err = -errno;
 			p_err("failed to read PID iterator output: %d", err);
 			goto out;
-- 
cgit v1.2.3


From 9ca325ffcac46ff1afe72cc3adfb96a848e26425 Mon Sep 17 00:00:00 2001
From: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Date: Wed, 19 Aug 2020 10:17:33 +0300
Subject: tools: usb: move to tools buildsystem

Converting the Makefile to use the new tools buildsystem.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
[fixes builds with O=...]
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200819071733.60028-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/usb/Build    |  2 ++
 tools/usb/Makefile | 53 +++++++++++++++++++++++++++++++++++++++++++++--------
 2 files changed, 47 insertions(+), 8 deletions(-)
 create mode 100644 tools/usb/Build

(limited to 'tools')

diff --git a/tools/usb/Build b/tools/usb/Build
new file mode 100644
index 000000000000..2ad6f9745816
--- /dev/null
+++ b/tools/usb/Build
@@ -0,0 +1,2 @@
+testusb-y += testusb.o
+ffs-test-y += ffs-test.o
diff --git a/tools/usb/Makefile b/tools/usb/Makefile
index 01d758d73b6d..1b128e551b2e 100644
--- a/tools/usb/Makefile
+++ b/tools/usb/Makefile
@@ -1,14 +1,51 @@
 # SPDX-License-Identifier: GPL-2.0
 # Makefile for USB tools
+include ../scripts/Makefile.include
 
-PTHREAD_LIBS = -lpthread
-WARNINGS = -Wall -Wextra
-CFLAGS = $(WARNINGS) -g -I../include
-LDFLAGS = $(PTHREAD_LIBS)
+bindir ?= /usr/bin
 
-all: testusb ffs-test
-%: %.c
-	$(CC) $(CFLAGS) -o $@ $^ $(LDFLAGS)
+ifeq ($(srctree),)
+srctree := $(patsubst %/,%,$(dir $(CURDIR)))
+srctree := $(patsubst %/,%,$(dir $(srctree)))
+endif
+
+# Do not use make's built-in rules
+# (this improves performance and avoids hard-to-debug behaviour);
+MAKEFLAGS += -r
+
+override CFLAGS += -O2 -Wall -Wextra -g -D_GNU_SOURCE -I$(OUTPUT)include -I$(srctree)/tools/include
+override LDFLAGS += -lpthread
+
+ALL_TARGETS := testusb ffs-test
+ALL_PROGRAMS := $(patsubst %,$(OUTPUT)%,$(ALL_TARGETS))
+
+all: $(ALL_PROGRAMS)
+
+export srctree OUTPUT CC LD CFLAGS
+include $(srctree)/tools/build/Makefile.include
+
+TESTUSB_IN := $(OUTPUT)testusb-in.o
+$(TESTUSB_IN): FORCE
+	$(Q)$(MAKE) $(build)=testusb
+$(OUTPUT)testusb: $(TESTUSB_IN)
+	$(QUIET_LINK)$(CC) $(CFLAGS) $< -o $@ $(LDFLAGS)
+
+FFS_TEST_IN := $(OUTPUT)ffs-test-in.o
+$(FFS_TEST_IN): FORCE
+	$(Q)$(MAKE) $(build)=ffs-test
+$(OUTPUT)ffs-test: $(FFS_TEST_IN)
+	$(QUIET_LINK)$(CC) $(CFLAGS) $< -o $@ $(LDFLAGS)
 
 clean:
-	$(RM) testusb ffs-test
+	rm -f $(ALL_PROGRAMS)
+	find $(if $(OUTPUT),$(OUTPUT),.) -name '*.o' -delete -o -name '\.*.d' -delete -o -name '\.*.o.cmd' -delete
+
+install: $(ALL_PROGRAMS)
+	install -d -m 755 $(DESTDIR)$(bindir);		\
+	for program in $(ALL_PROGRAMS); do		\
+		install $$program $(DESTDIR)$(bindir);	\
+	done
+
+FORCE:
+
+.PHONY: all install clean FORCE prepare
-- 
cgit v1.2.3


From 1e891e513e16c145cc9b45b1fdb8bf4a4f2f9557 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Toke=20H=C3=B8iland-J=C3=B8rgensen?= <toke@redhat.com>
Date: Wed, 19 Aug 2020 13:05:34 +0200
Subject: libbpf: Fix map index used in error message
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The error message emitted by bpf_object__init_user_btf_maps() was using the
wrong section ID.

Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200819110534.9058-1-toke@redhat.com
---
 tools/lib/bpf/libbpf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'tools')

diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c
index 5d20b2da4427..0ad0b0491e1f 100644
--- a/tools/lib/bpf/libbpf.c
+++ b/tools/lib/bpf/libbpf.c
@@ -2264,7 +2264,7 @@ static int bpf_object__init_user_btf_maps(struct bpf_object *obj, bool strict,
 		data = elf_getdata(scn, NULL);
 	if (!scn || !data) {
 		pr_warn("failed to get Elf_Data from map section %d (%s)\n",
-			obj->efile.maps_shndx, MAPS_ELF_SEC);
+			obj->efile.btf_maps_shndx, MAPS_ELF_SEC);
 		return -EINVAL;
 	}
 
-- 
cgit v1.2.3


From 51f6463aacfbfd322bcaadc606da56acef644b05 Mon Sep 17 00:00:00 2001
From: Jiri Olsa <jolsa@kernel.org>
Date: Wed, 19 Aug 2020 11:23:42 +0200
Subject: tools/resolve_btfids: Fix sections with wrong alignment

The data of compressed section should be aligned to 4
(for 32bit) or 8 (for 64 bit) bytes.

The binutils ld sets sh_addralign to 1, which makes libelf
fail with misaligned section error during the update as
reported by Jesper:

   FAILED elf_update(WRITE): invalid section alignment

While waiting for ld fix, we can fix compressed sections
sh_addralign value manually.

Adding warning in -vv mode when the fix is triggered:

  $ ./tools/bpf/resolve_btfids/resolve_btfids -vv vmlinux
  ...
  section(36) .comment, size 44, link 0, flags 30, type=1
  section(37) .debug_aranges, size 45684, link 0, flags 800, type=1
   - fixing wrong alignment sh_addralign 16, expected 8
  section(38) .debug_info, size 129104957, link 0, flags 800, type=1
   - fixing wrong alignment sh_addralign 1, expected 8
  section(39) .debug_abbrev, size 1152583, link 0, flags 800, type=1
   - fixing wrong alignment sh_addralign 1, expected 8
  section(40) .debug_line, size 7374522, link 0, flags 800, type=1
   - fixing wrong alignment sh_addralign 1, expected 8
  section(41) .debug_frame, size 702463, link 0, flags 800, type=1
  section(42) .debug_str, size 1017571, link 0, flags 830, type=1
   - fixing wrong alignment sh_addralign 1, expected 8
  section(43) .debug_loc, size 3019453, link 0, flags 800, type=1
   - fixing wrong alignment sh_addralign 1, expected 8
  section(44) .debug_ranges, size 1744583, link 0, flags 800, type=1
   - fixing wrong alignment sh_addralign 16, expected 8
  section(45) .symtab, size 2955888, link 46, flags 0, type=2
  section(46) .strtab, size 2613072, link 0, flags 0, type=3
  ...
  update ok for vmlinux

Another workaround is to disable compressed debug info data
CONFIG_DEBUG_INFO_COMPRESSED kernel option.

Fixes: fbbb68de80a4 ("bpf: Add resolve_btfids tool to resolve BTF IDs in ELF object")
Reported-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Yonghong Song <yhs@fb.com>
Cc: Mark Wielaard <mjw@redhat.com>
Cc: Nick Clifton <nickc@redhat.com>
Link: https://lore.kernel.org/bpf/20200819092342.259004-1-jolsa@kernel.org
---
 tools/bpf/resolve_btfids/main.c | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

(limited to 'tools')

diff --git a/tools/bpf/resolve_btfids/main.c b/tools/bpf/resolve_btfids/main.c
index 4d9ecb975862..0def0bb1f783 100644
--- a/tools/bpf/resolve_btfids/main.c
+++ b/tools/bpf/resolve_btfids/main.c
@@ -233,6 +233,39 @@ static struct btf_id *add_symbol(struct rb_root *root, char *name, size_t size)
 	return btf_id__add(root, id, false);
 }
 
+/*
+ * The data of compressed section should be aligned to 4
+ * (for 32bit) or 8 (for 64 bit) bytes. The binutils ld
+ * sets sh_addralign to 1, which makes libelf fail with
+ * misaligned section error during the update:
+ *    FAILED elf_update(WRITE): invalid section alignment
+ *
+ * While waiting for ld fix, we fix the compressed sections
+ * sh_addralign value manualy.
+ */
+static int compressed_section_fix(Elf *elf, Elf_Scn *scn, GElf_Shdr *sh)
+{
+	int expected = gelf_getclass(elf) == ELFCLASS32 ? 4 : 8;
+
+	if (!(sh->sh_flags & SHF_COMPRESSED))
+		return 0;
+
+	if (sh->sh_addralign == expected)
+		return 0;
+
+	pr_debug2(" - fixing wrong alignment sh_addralign %u, expected %u\n",
+		  sh->sh_addralign, expected);
+
+	sh->sh_addralign = expected;
+
+	if (gelf_update_shdr(scn, sh) == 0) {
+		printf("FAILED cannot update section header: %s\n",
+			elf_errmsg(-1));
+		return -1;
+	}
+	return 0;
+}
+
 static int elf_collect(struct object *obj)
 {
 	Elf_Scn *scn = NULL;
@@ -309,6 +342,9 @@ static int elf_collect(struct object *obj)
 			obj->efile.idlist_shndx = idx;
 			obj->efile.idlist_addr  = sh.sh_addr;
 		}
+
+		if (compressed_section_fix(elf, scn, &sh))
+			return -1;
 	}
 
 	return 0;
-- 
cgit v1.2.3


From 5597432dde62befd3ab92e6ef9e073564e277ea8 Mon Sep 17 00:00:00 2001
From: Veronika Kabatova <vkabatov@redhat.com>
Date: Wed, 19 Aug 2020 18:07:10 +0200
Subject: selftests/bpf: Remove test_align leftovers

Calling generic selftests "make install" fails as rsync expects all
files from TEST_GEN_PROGS to be present. The binary is not generated
anymore (commit 3b09d27cc93d) so we can safely remove it from there
and also from gitignore.

Fixes: 3b09d27cc93d ("selftests/bpf: Move test_align under test_progs")
Signed-off-by: Veronika Kabatova <vkabatov@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/20200819160710.1345956-1-vkabatov@redhat.com
---
 tools/testing/selftests/bpf/.gitignore | 1 -
 tools/testing/selftests/bpf/Makefile   | 2 +-
 2 files changed, 1 insertion(+), 2 deletions(-)

(limited to 'tools')

diff --git a/tools/testing/selftests/bpf/.gitignore b/tools/testing/selftests/bpf/.gitignore
index 1bb204cee853..9a0946ddb705 100644
--- a/tools/testing/selftests/bpf/.gitignore
+++ b/tools/testing/selftests/bpf/.gitignore
@@ -6,7 +6,6 @@ test_lpm_map
 test_tag
 FEATURE-DUMP.libbpf
 fixdep
-test_align
 test_dev_cgroup
 /test_progs*
 test_tcpbpf_user
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
index a83b5827532f..fc946b7ac288 100644
--- a/tools/testing/selftests/bpf/Makefile
+++ b/tools/testing/selftests/bpf/Makefile
@@ -32,7 +32,7 @@ LDLIBS += -lcap -lelf -lz -lrt -lpthread
 
 # Order correspond to 'make run_tests' order
 TEST_GEN_PROGS = test_verifier test_tag test_maps test_lru_map test_lpm_map test_progs \
-	test_align test_verifier_log test_dev_cgroup test_tcpbpf_user \
+	test_verifier_log test_dev_cgroup test_tcpbpf_user \
 	test_sock test_btf test_sockmap get_cgroup_id_user test_socket_cookie \
 	test_cgroup_storage \
 	test_netcnt test_tcpnotify_user test_sock_fields test_sysctl \
-- 
cgit v1.2.3


From c210773d6c6f595f5922d56b7391fe343bc7310e Mon Sep 17 00:00:00 2001
From: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Date: Thu, 20 Aug 2020 14:58:43 +0300
Subject: bpf: selftests: global_funcs: Check err_str before strstr

The error path in libbpf.c:load_program() has calls to pr_warn()
which ends up for global_funcs tests to
test_global_funcs.c:libbpf_debug_print().

For the tests with no struct test_def::err_str initialized with a
string, it causes call of strstr() with NULL as the second argument
and it segfaults.

Fix it by calling strstr() only for non-NULL err_str.

Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200820115843.39454-1-yauheni.kaliuta@redhat.com
---
 tools/testing/selftests/bpf/prog_tests/test_global_funcs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'tools')

diff --git a/tools/testing/selftests/bpf/prog_tests/test_global_funcs.c b/tools/testing/selftests/bpf/prog_tests/test_global_funcs.c
index 25b068591e9a..193002b14d7f 100644
--- a/tools/testing/selftests/bpf/prog_tests/test_global_funcs.c
+++ b/tools/testing/selftests/bpf/prog_tests/test_global_funcs.c
@@ -19,7 +19,7 @@ static int libbpf_debug_print(enum libbpf_print_level level,
 	log_buf = va_arg(args, char *);
 	if (!log_buf)
 		goto out;
-	if (strstr(log_buf, err_str) == 0)
+	if (err_str && strstr(log_buf, err_str) == 0)
 		found = true;
 out:
 	printf(format, log_buf);
-- 
cgit v1.2.3


From b16fc097bc283184cde40e5b30d15705e1590410 Mon Sep 17 00:00:00 2001
From: Tobias Klauser <tklauser@distanz.ch>
Date: Fri, 21 Aug 2020 15:36:42 +0200
Subject: bpf: Fix two typos in uapi/linux/bpf.h

Also remove trailing whitespaces in bpf_skb_get_tunnel_key example code.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200821133642.18870-1-tklauser@distanz.ch
---
 tools/include/uapi/linux/bpf.h | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

(limited to 'tools')

diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h
index 0480f893facd..b6238b2209b7 100644
--- a/tools/include/uapi/linux/bpf.h
+++ b/tools/include/uapi/linux/bpf.h
@@ -767,7 +767,7 @@ union bpf_attr {
  *
  * 		Also, note that **bpf_trace_printk**\ () is slow, and should
  * 		only be used for debugging purposes. For this reason, a notice
- * 		bloc (spanning several lines) is printed to kernel logs and
+ * 		block (spanning several lines) is printed to kernel logs and
  * 		states that the helper should not be used "for production use"
  * 		the first time this helper is used (or more precisely, when
  * 		**trace_printk**\ () buffers are allocated). For passing values
@@ -1033,14 +1033,14 @@ union bpf_attr {
  *
  * 			int ret;
  * 			struct bpf_tunnel_key key = {};
- * 			
+ *
  * 			ret = bpf_skb_get_tunnel_key(skb, &key, sizeof(key), 0);
  * 			if (ret < 0)
  * 				return TC_ACT_SHOT;	// drop packet
- * 			
+ *
  * 			if (key.remote_ipv4 != 0x0a000001)
  * 				return TC_ACT_SHOT;	// drop packet
- * 			
+ *
  * 			return TC_ACT_OK;		// accept packet
  *
  * 		This interface can also be used with all encapsulation devices
@@ -1147,7 +1147,7 @@ union bpf_attr {
  * 	Description
  * 		Retrieve the realm or the route, that is to say the
  * 		**tclassid** field of the destination for the *skb*. The
- * 		indentifier retrieved is a user-provided tag, similar to the
+ * 		identifier retrieved is a user-provided tag, similar to the
  * 		one used with the net_cls cgroup (see description for
  * 		**bpf_get_cgroup_classid**\ () helper), but here this tag is
  * 		held by a route (a destination entry), not by a task.
-- 
cgit v1.2.3


From 12564485ed8caac3c18572793ec01330792c7191 Mon Sep 17 00:00:00 2001
From: Shawn Anastasio <shawn@anastas.io>
Date: Fri, 21 Aug 2020 13:55:56 -0500
Subject: Revert "powerpc/64s: Remove PROT_SAO support"

This reverts commit 5c9fa16e8abd342ce04dc830c1ebb2a03abf6c05.

Since PROT_SAO can still be useful for certain classes of software,
reintroduce it. Concerns about guest migration for LPARs using SAO
will be addressed next.

Signed-off-by: Shawn Anastasio <shawn@anastas.io>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200821185558.35561-2-shawn@anastas.io
---
 tools/testing/selftests/powerpc/mm/.gitignore |  1 +
 tools/testing/selftests/powerpc/mm/Makefile   |  4 ++-
 tools/testing/selftests/powerpc/mm/prot_sao.c | 42 +++++++++++++++++++++++++++
 3 files changed, 46 insertions(+), 1 deletion(-)
 create mode 100644 tools/testing/selftests/powerpc/mm/prot_sao.c

(limited to 'tools')

diff --git a/tools/testing/selftests/powerpc/mm/.gitignore b/tools/testing/selftests/powerpc/mm/.gitignore
index 91c775c23c66..aac4a59f9e28 100644
--- a/tools/testing/selftests/powerpc/mm/.gitignore
+++ b/tools/testing/selftests/powerpc/mm/.gitignore
@@ -2,6 +2,7 @@
 hugetlb_vs_thp_test
 subpage_prot
 tempfile
+prot_sao
 segv_errors
 wild_bctr
 large_vm_fork_separation
diff --git a/tools/testing/selftests/powerpc/mm/Makefile b/tools/testing/selftests/powerpc/mm/Makefile
index 250ce172e0da..defe488d6bf1 100644
--- a/tools/testing/selftests/powerpc/mm/Makefile
+++ b/tools/testing/selftests/powerpc/mm/Makefile
@@ -2,7 +2,7 @@
 noarg:
 	$(MAKE) -C ../
 
-TEST_GEN_PROGS := hugetlb_vs_thp_test subpage_prot segv_errors wild_bctr \
+TEST_GEN_PROGS := hugetlb_vs_thp_test subpage_prot prot_sao segv_errors wild_bctr \
 		  large_vm_fork_separation bad_accesses pkey_exec_prot \
 		  pkey_siginfo stack_expansion_signal stack_expansion_ldst
 
@@ -14,6 +14,8 @@ include ../../lib.mk
 
 $(TEST_GEN_PROGS): ../harness.c ../utils.c
 
+$(OUTPUT)/prot_sao: ../utils.c
+
 $(OUTPUT)/wild_bctr: CFLAGS += -m64
 $(OUTPUT)/large_vm_fork_separation: CFLAGS += -m64
 $(OUTPUT)/bad_accesses: CFLAGS += -m64
diff --git a/tools/testing/selftests/powerpc/mm/prot_sao.c b/tools/testing/selftests/powerpc/mm/prot_sao.c
new file mode 100644
index 000000000000..e2eed65b7735
--- /dev/null
+++ b/tools/testing/selftests/powerpc/mm/prot_sao.c
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2016, Michael Ellerman, IBM Corp.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/mman.h>
+
+#include <asm/cputable.h>
+
+#include "utils.h"
+
+#define SIZE (64 * 1024)
+
+int test_prot_sao(void)
+{
+	char *p;
+
+	/* 2.06 or later should support SAO */
+	SKIP_IF(!have_hwcap(PPC_FEATURE_ARCH_2_06));
+
+	/*
+	 * Ensure we can ask for PROT_SAO.
+	 * We can't really verify that it does the right thing, but at least we
+	 * confirm the kernel will accept it.
+	 */
+	p = mmap(NULL, SIZE, PROT_READ | PROT_WRITE | PROT_SAO,
+		 MAP_ANONYMOUS | MAP_PRIVATE, -1, 0);
+	FAIL_IF(p == MAP_FAILED);
+
+	/* Write to the mapping, to at least cause a fault */
+	memset(p, 0xaa, SIZE);
+
+	return 0;
+}
+
+int main(void)
+{
+	return test_harness(test_prot_sao, "prot-sao");
+}
-- 
cgit v1.2.3


From 24ded46f53f954b9cf246c5d4e3770c7a8aa84ce Mon Sep 17 00:00:00 2001
From: Shawn Anastasio <shawn@anastas.io>
Date: Fri, 21 Aug 2020 13:55:58 -0500
Subject: selftests/powerpc: Update PROT_SAO test to skip ISA 3.1

Since SAO support was removed from ISA 3.1, skip the
prot_sao test if PPC_FEATURE2_ARCH_3_1 is set.

Signed-off-by: Shawn Anastasio <shawn@anastas.io>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200821185558.35561-4-shawn@anastas.io
---
 tools/testing/selftests/powerpc/mm/prot_sao.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'tools')

diff --git a/tools/testing/selftests/powerpc/mm/prot_sao.c b/tools/testing/selftests/powerpc/mm/prot_sao.c
index e2eed65b7735..e0cf8ebbf8cd 100644
--- a/tools/testing/selftests/powerpc/mm/prot_sao.c
+++ b/tools/testing/selftests/powerpc/mm/prot_sao.c
@@ -18,8 +18,9 @@ int test_prot_sao(void)
 {
 	char *p;
 
-	/* 2.06 or later should support SAO */
-	SKIP_IF(!have_hwcap(PPC_FEATURE_ARCH_2_06));
+	/* SAO was introduced in 2.06 and removed in 3.1 */
+	SKIP_IF(!have_hwcap(PPC_FEATURE_ARCH_2_06) ||
+		have_hwcap2(PPC_FEATURE2_ARCH_3_1));
 
 	/*
 	 * Ensure we can ask for PROT_SAO.
-- 
cgit v1.2.3