From afbac6c500da7235e9767b99e3fe2369cf3618a4 Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Mon, 30 Sep 2019 21:49:25 +0900 Subject: ktest: Fix some typos in sample.conf This patch fixes some spelling typo in sample.conf Link: http://lkml.kernel.org/r/20190930124925.20250-1-standby24x7@gmail.com Acked-by: Randy Dunlap Signed-off-by: Masanari Iida Signed-off-by: Steven Rostedt (VMware) --- tools/testing/ktest/sample.conf | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'tools') diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf index c3bc933d437b..10af34819642 100644 --- a/tools/testing/ktest/sample.conf +++ b/tools/testing/ktest/sample.conf @@ -10,7 +10,7 @@ # # Options set in the beginning of the file are considered to be -# default options. These options can be overriden by test specific +# default options. These options can be overridden by test specific # options, with the following exceptions: # # LOG_FILE @@ -204,7 +204,7 @@ # # This config file can also contain "config variables". # These are assigned with ":=" instead of the ktest option -# assigment "=". +# assignment "=". # # The difference between ktest options and config variables # is that config variables can be used multiple times, @@ -263,7 +263,7 @@ #### Using options in other options #### # # Options that are defined in the config file may also be used -# by other options. All options are evaulated at time of +# by other options. All options are evaluated at time of # use (except that config variables are evaluated at config # processing time). # @@ -707,7 +707,7 @@ # Line to define a successful boot up in console output. # This is what the line contains, not the entire line. If you need -# the entire line to match, then use regural expression syntax like: +# the entire line to match, then use regular expression syntax like: # (do not add any quotes around it) # # SUCCESS_LINE = ^MyBox Login:$ @@ -839,7 +839,7 @@ # (ignored if POWEROFF_ON_SUCCESS is set) #REBOOT_ON_SUCCESS = 1 -# In case there are isses with rebooting, you can specify this +# In case there are issues with rebooting, you can specify this # to always powercycle after this amount of time after calling # reboot. # Note, POWERCYCLE_AFTER_REBOOT = 0 does NOT disable it. It just @@ -848,7 +848,7 @@ # (default undefined) #POWERCYCLE_AFTER_REBOOT = 5 -# In case there's isses with halting, you can specify this +# In case there's issues with halting, you can specify this # to always poweroff after this amount of time after calling # halt. # Note, POWEROFF_AFTER_HALT = 0 does NOT disable it. It just @@ -972,7 +972,7 @@ # # PATCHCHECK_START is required and is the first patch to # test (the SHA1 of the commit). You may also specify anything -# that git checkout allows (branch name, tage, HEAD~3). +# that git checkout allows (branch name, tag, HEAD~3). # # PATCHCHECK_END is the last patch to check (default HEAD) # @@ -994,7 +994,7 @@ # IGNORE_WARNINGS is set for the given commit's sha1 # # IGNORE_WARNINGS can be used to disable the failure of patchcheck -# on a particuler commit (SHA1). You can add more than one commit +# on a particular commit (SHA1). You can add more than one commit # by adding a list of SHA1s that are space delimited. # # If BUILD_NOCLEAN is set, then make mrproper will not be run on @@ -1093,7 +1093,7 @@ # whatever reason. (Can't reboot, want to inspect each iteration) # Doing a BISECT_MANUAL will have the test wait for you to # tell it if the test passed or failed after each iteration. -# This is basicall the same as running git bisect yourself +# This is basically the same as running git bisect yourself # but ktest will rebuild and install the kernel for you. # # BISECT_CHECK = 1 (optional, default 0) @@ -1239,7 +1239,7 @@ # # CONFIG_BISECT_EXEC (optional) # The config bisect is a separate program that comes with ktest.pl. -# By befault, it will look for: +# By default, it will look for: # `pwd`/config-bisect.pl # the location ktest.pl was executed from. # If it does not find it there, it will look for: # `dirname `/config-bisect.pl # The directory that holds ktest.pl -- cgit v1.2.3 From 791dc9d6b3ca4291be6cfce7b9be468d61d7ed95 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (VMware)" Date: Wed, 13 Nov 2019 13:36:24 -0500 Subject: ktest: Make default build option oldconfig not randconfig For the last time, I screwed up my ktest config file, and the build went into the default "randconfig", blowing away the .config that I had set up. The reason for the default randconfig was because when this was first written, I wanted to do a bunch of randconfigs. But as time progressed, ktest isn't about randconfig anymore, and because randconfig destroys the config in the build directory, it's a dangerous default to have. Use oldconfig as the default. Signed-off-by: Steven Rostedt (VMware) --- tools/testing/ktest/ktest.pl | 2 +- tools/testing/ktest/sample.conf | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'tools') diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 220d04f958a6..6a605ba75dd6 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -30,7 +30,7 @@ my %default = ( "EMAIL_WHEN_STARTED" => 0, "NUM_TESTS" => 1, "TEST_TYPE" => "build", - "BUILD_TYPE" => "randconfig", + "BUILD_TYPE" => "oldconfig", "MAKE_CMD" => "make", "CLOSE_CONSOLE_SIGNAL" => "INT", "TIMEOUT" => 120, diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf index 10af34819642..27666b8007ed 100644 --- a/tools/testing/ktest/sample.conf +++ b/tools/testing/ktest/sample.conf @@ -505,7 +505,7 @@ #TEST = ssh user@machine /root/run_test # The build type is any make config type or special command -# (default randconfig) +# (default oldconfig) # nobuild - skip the clean and build step # useconfig:/path/to/config - use the given config and run # oldconfig on it. -- cgit v1.2.3 From 4d00fc477a2ce8b6d2b09fb34ef9fe9918e7d434 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (VMware)" Date: Mon, 9 Mar 2020 16:00:11 -0400 Subject: ktest: Add timeout for ssh sync testing Before rebooting the box, a "ssh sync" is called to the test machine to see if it is alive or not. But if the test machine is in a partial state, that ssh may never actually finish, and the ktest test hangs. Add a 10 second timeout to the sync test, which will fail after 10 seconds and then cause the test to reboot the test machine. Cc: stable@vger.kernel.org Fixes: 6474ace999edd ("ktest.pl: Powercycle the box on reboot if no connection can be made") Signed-off-by: Steven Rostedt (VMware) --- tools/testing/ktest/ktest.pl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'tools') diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 6a605ba75dd6..8bdd7253c110 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -1383,7 +1383,7 @@ sub reboot { } else { # Make sure everything has been written to disk - run_ssh("sync"); + run_ssh("sync", 10); if (defined($time)) { start_monitor; -- cgit v1.2.3 From 1091c8fce8aa9c5abe1a73acab4bcaf58a729005 Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Mon, 9 Mar 2020 20:54:30 +0900 Subject: ktest: Fix typos in ktest.pl This patch fixes multipe spelling typo found in ktest.pl. Link: http://lkml.kernel.org/r/20200309115430.57540-1-standby24x7@gmail.com Acked-by: Randy Dunlap Signed-off-by: Masanari Iida Signed-off-by: Steven Rostedt (VMware) --- tools/testing/ktest/ktest.pl | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'tools') diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 8bdd7253c110..7570e36d636d 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -1030,7 +1030,7 @@ sub __read_config { } if (!$skip && $rest !~ /^\s*$/) { - die "$name: $.: Gargbage found after $type\n$_"; + die "$name: $.: Garbage found after $type\n$_"; } if ($skip && $type eq "TEST_START") { @@ -1063,7 +1063,7 @@ sub __read_config { } if ($rest !~ /^\s*$/) { - die "$name: $.: Gargbage found after DEFAULTS\n$_"; + die "$name: $.: Garbage found after DEFAULTS\n$_"; } } elsif (/^\s*INCLUDE\s+(\S+)/) { @@ -1154,7 +1154,7 @@ sub __read_config { # on of these sections that have SKIP defined. # The save variable can be # defined multiple times and the new one simply overrides - # the prevous one. + # the previous one. set_variable($lvalue, $rvalue); } else { @@ -1234,7 +1234,7 @@ sub read_config { foreach my $option (keys %not_used) { print "$option\n"; } - print "Set IGRNORE_UNUSED = 1 to have ktest ignore unused variables\n"; + print "Set IGNORE_UNUSED = 1 to have ktest ignore unused variables\n"; if (!read_yn "Do you want to continue?") { exit -1; } @@ -1345,7 +1345,7 @@ sub eval_option { # Check for recursive evaluations. # 100 deep should be more than enough. if ($r++ > 100) { - die "Over 100 evaluations accurred with $option\n" . + die "Over 100 evaluations occurred with $option\n" . "Check for recursive variables\n"; } $prev = $option; @@ -1461,7 +1461,7 @@ sub get_test_name() { sub dodie { - # avoid recusion + # avoid recursion return if ($in_die); $in_die = 1; -- cgit v1.2.3