From 68688e78ed4bc8d1a811ca29e2f8681561706db3 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 12 Apr 2011 00:00:36 -0700 Subject: ASoC: Add Speyside headset jack detection support Speyside makes use of support the WM8915 has for detecting the polarity of the microphone and ground connections on headsets, using a GPIO to control the polarity of the ground connection and switching between the two microphone bias supplies available on the device in order to do so. As a result of this the detection support is more involved than for most other CODECs, using a callback to configure the current polarity of the jack and translate this into the board-specific connections required for the current scenario. On Android some additional work is required to hook this up to the application layer as the Android HeadsetObserver monitors a custom drivers/switch API rather than the standard Linux APIs. This can be done by either updating HeadsetObserver or modifying the ALSA core to report via drivers/switch as well. Signed-off-by: Mark Brown Acked-by: Jassi Brar Acked-by: Liam Girdwood --- sound/soc/samsung/speyside.c | 78 +++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 77 insertions(+), 1 deletion(-) (limited to 'sound') diff --git a/sound/soc/samsung/speyside.c b/sound/soc/samsung/speyside.c index 0adaf7fe6814..612a39e0e108 100644 --- a/sound/soc/samsung/speyside.c +++ b/sound/soc/samsung/speyside.c @@ -11,10 +11,14 @@ #include #include +#include +#include #include "../codecs/wm8915.h" #include "../codecs/wm9081.h" +#define WM8915_HPSEL_GPIO 214 + static int speyside_set_bias_level(struct snd_soc_card *card, enum snd_soc_bias_level level) { @@ -79,11 +83,74 @@ static struct snd_soc_ops speyside_ops = { .hw_params = speyside_hw_params, }; +static struct snd_soc_jack speyside_headset; + +/* Headset jack detection DAPM pins */ +static struct snd_soc_jack_pin speyside_headset_pins[] = { + { + .pin = "Headset Mic", + .mask = SND_JACK_MICROPHONE, + }, + { + .pin = "Headphone", + .mask = SND_JACK_HEADPHONE, + }, +}; + +/* Default the headphone selection to active high */ +static int speyside_jack_polarity; + +static int speyside_get_micbias(struct snd_soc_dapm_widget *source, + struct snd_soc_dapm_widget *sink) +{ + if (speyside_jack_polarity && (strcmp(source->name, "MICB1") == 0)) + return 1; + if (!speyside_jack_polarity && (strcmp(source->name, "MICB2") == 0)) + return 1; + + return 0; +} + +static void speyside_set_polarity(struct snd_soc_codec *codec, + int polarity) +{ + speyside_jack_polarity = !polarity; + gpio_direction_output(WM8915_HPSEL_GPIO, speyside_jack_polarity); + + /* Re-run DAPM to make sure we're using the correct mic bias */ + snd_soc_dapm_sync(&codec->dapm); +} + static int speyside_wm8915_init(struct snd_soc_pcm_runtime *rtd) { struct snd_soc_dai *dai = rtd->codec_dai; + struct snd_soc_codec *codec = rtd->codec; + int ret; + + ret = snd_soc_dai_set_sysclk(dai, WM8915_SYSCLK_MCLK1, 32768, 0); + if (ret < 0) + return ret; + + ret = gpio_request(WM8915_HPSEL_GPIO, "HP_SEL"); + if (ret != 0) + pr_err("Failed to request HP_SEL GPIO: %d\n", ret); + gpio_direction_output(WM8915_HPSEL_GPIO, speyside_jack_polarity); - return snd_soc_dai_set_sysclk(dai, WM8915_SYSCLK_MCLK1, 32768, 0); + ret = snd_soc_jack_new(codec, "Headset", + SND_JACK_HEADSET | SND_JACK_BTN_0, + &speyside_headset); + if (ret) + return ret; + + ret = snd_soc_jack_add_pins(&speyside_headset, + ARRAY_SIZE(speyside_headset_pins), + speyside_headset_pins); + if (ret) + return ret; + + wm8915_detect(codec, &speyside_headset, speyside_set_polarity); + + return 0; } static struct snd_soc_dai_link speyside_dai[] = { @@ -125,6 +192,7 @@ static struct snd_soc_codec_conf speyside_codec_conf[] = { static struct snd_soc_dapm_widget widgets[] = { SND_SOC_DAPM_HP("Headphone", NULL), + SND_SOC_DAPM_MIC("Headset Mic", NULL), SND_SOC_DAPM_SPK("Main Speaker", NULL), @@ -133,7 +201,15 @@ static struct snd_soc_dapm_widget widgets[] = { }; static struct snd_soc_dapm_route audio_paths[] = { + { "IN1RN", NULL, "MICB1" }, + { "IN1RP", NULL, "MICB1" }, + { "IN1RN", NULL, "MICB2" }, + { "IN1RP", NULL, "MICB2" }, + { "MICB1", NULL, "Headset Mic", speyside_get_micbias }, + { "MICB2", NULL, "Headset Mic", speyside_get_micbias }, + { "IN1LP", NULL, "MICB2" }, + { "IN1RN", NULL, "MICB1" }, { "MICB2", NULL, "Main AMIC" }, { "DMIC1DAT", NULL, "MICB1" }, -- cgit v1.2.3