From ea88df9bf895720289331e41ed73cdcb04059900 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Wed, 21 Sep 2005 21:37:24 +0400 Subject: ver_linux: don't print reiser4progs version if none found Sam: did the same for reiserprogs Signed-off-by: Alexey Dobriyan Signed-off-by: Sam Ravnborg --- scripts/ver_linux | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'scripts') diff --git a/scripts/ver_linux b/scripts/ver_linux index beb43ef7f761..84999f69773d 100755 --- a/scripts/ver_linux +++ b/scripts/ver_linux @@ -39,10 +39,10 @@ tune2fs 2>&1 | grep "^tune2fs" | sed 's/,//' | awk \ fsck.jfs -V 2>&1 | grep version | sed 's/,//' | awk \ 'NR==1 {print "jfsutils ", $3}' -reiserfsck -V 2>&1 | grep reiserfsck | awk \ +reiserfsck -V 2>&1 | grep ^reiserfsck | awk \ 'NR==1{print "reiserfsprogs ", $2}' -fsck.reiser4 -V 2>&1 | grep fsck.reiser4 | awk \ +fsck.reiser4 -V 2>&1 | grep ^fsck.reiser4 | awk \ 'NR==1{print "reiser4progs ", $2}' xfs_db -V 2>&1 | grep version | awk \ -- cgit v1.2.3 From d9df92e22aca939857c5bc9ecb130ef22307ccc1 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Fri, 7 Apr 2006 08:36:49 +0200 Subject: kbuild: properly pass options to hostcc when doing make O=.. This fix a longstanding bug where proper options was not passed to hostcc in case of a make O=.. build. This bug showed up in (not yet merged) klibc, and is not known to have any counterpart in-kernel. Fixed by moving the flags macro to Kbuild.include so it can be used by both Makefile.lib and Makefile.host. Signed-off-by: Sam Ravnborg --- scripts/Kbuild.include | 5 +++++ scripts/Makefile.lib | 5 ----- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'scripts') diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include index 59620b1554e0..b0d067be7390 100644 --- a/scripts/Kbuild.include +++ b/scripts/Kbuild.include @@ -87,6 +87,11 @@ cc-ifversion = $(shell if [ $(call cc-version, $(CC)) $(1) $(2) ]; then \ # $(Q)$(MAKE) $(build)=dir build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj +# Prefix -I with $(srctree) if it is not an absolute path +addtree = $(if $(filter-out -I/%,$(1)),$(patsubst -I%,-I$(srctree)/%,$(1))) $(1) +# Find all -I options and call addtree +flags = $(foreach o,$($(1)),$(if $(filter -I%,$(o)),$(call addtree,$(o)),$(o))) + # If quiet is set, only print short version of command cmd = @$(echo-cmd) $(cmd_$(1)) diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index 550798f57da5..2cb4935e85d1 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -99,11 +99,6 @@ __a_flags = $(_a_flags) __cpp_flags = $(_cpp_flags) else -# Prefix -I with $(srctree) if it is not an absolute path -addtree = $(if $(filter-out -I/%,$(1)),$(patsubst -I%,-I$(srctree)/%,$(1))) $(1) -# Find all -I options and call addtree -flags = $(foreach o,$($(1)),$(if $(filter -I%,$(o)),$(call addtree,$(o)),$(o))) - # -I$(obj) locates generated .h files # $(call addtree,-I$(obj)) locates .h files in srctree, from generated .c files # and locates generated .h files -- cgit v1.2.3 From d39a206bc35d46a3b2eb98cd4f34e340d5e56a50 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Tue, 11 Apr 2006 13:24:32 +0200 Subject: kbuild: rebuild initramfs if content of initramfs changes initramfs.cpio.gz being build in usr/ and included in the kernel was not rebuild when the included files changed. To fix this the following was done: - let gen_initramfs.sh generate a list of files and directories included in the initramfs - gen_initramfs generate the gzipped cpio archive so we could simplify the kbuild file (Makefile) - utilising the kbuild infrastructure so when uid/gid root mapping changes the initramfs will be rebuild With this change we have a much more robust initramfs generation. Signed-off-by: Sam Ravnborg --- scripts/gen_initramfs_list.sh | 225 ++++++++++++++++++++++++++++-------------- 1 file changed, 152 insertions(+), 73 deletions(-) (limited to 'scripts') diff --git a/scripts/gen_initramfs_list.sh b/scripts/gen_initramfs_list.sh index 6d411169bfa6..56b3bed1108f 100644 --- a/scripts/gen_initramfs_list.sh +++ b/scripts/gen_initramfs_list.sh @@ -1,22 +1,55 @@ #!/bin/bash # Copyright (C) Martin Schlemmer -# Released under the terms of the GNU GPL -# -# Generate a newline separated list of entries from the file/directory -# supplied as an argument. -# -# If a file/directory is not supplied then generate a small dummy file. +# Copyright (c) 2006 Sam Ravnborg # -# The output is suitable for gen_init_cpio built from usr/gen_init_cpio.c. +# Released under the terms of the GNU GPL # +# Generate a cpio packed initramfs. It uses gen_init_cpio to generate +# the cpio archive, and gzip to pack it. +# The script may also be used to generate the inputfile used for gen_init_cpio +# This script assumes that gen_init_cpio is located in usr/ directory + +# error out on errors +set -e + +usage() { +cat << EOF +Usage: +$0 [-o ] [-u ] [-g ] {-d | } ... + -o Create gzipped initramfs file named using + gen_init_cpio and gzip + -u User ID to map to user ID 0 (root). + is only meaningful if + is a directory. + -g Group ID to map to group ID 0 (root). + is only meaningful if + is a directory. + File list or directory for cpio archive. + If is a .cpio file it will be used + as direct input to initramfs. + -d Output the default cpio list. + +All options except -o and -l may be repeated and are interpreted +sequentially and immediately. -u and -g states are preserved across + options so an explicit "-u 0 -g 0" is required +to reset the root/group mapping. +EOF +} + +list_default_initramfs() { + # echo usr/kinit/kinit + : +} default_initramfs() { - cat <<-EOF + cat <<-EOF >> ${output} # This is a very simple, default initramfs dir /dev 0755 0 0 nod /dev/console 0600 0 0 c 5 1 dir /root 0700 0 0 + # file /kinit usr/kinit/kinit 0755 0 0 + # slink /init kinit 0755 0 0 EOF } @@ -42,18 +75,28 @@ filetype() { return 0 } +list_print_mtime() { + : +} + print_mtime() { - local argv1="$1" local my_mtime="0" - if [ -e "${argv1}" ]; then - my_mtime=$(find "${argv1}" -printf "%T@\n" | sort -r | head -n 1) + if [ -e "$1" ]; then + my_mtime=$(find "$1" -printf "%T@\n" | sort -r | head -n 1) fi - - echo "# Last modified: ${my_mtime}" - echo + + echo "# Last modified: ${my_mtime}" >> ${output} + echo "" >> ${output} +} + +list_parse() { + echo "$1 \\" } +# for each file print a line in following format +# +# for links, devices etc the format differs. See gen_init_cpio for details parse() { local location="$1" local name="${location/${srcdir}//}" @@ -99,80 +142,112 @@ parse() { ;; esac - echo "${str}" + echo "${str}" >> ${output} return 0 } -usage() { - printf "Usage:\n" - printf "$0 [ [-u ] [-g ] [-d | ] ] . . .\n" - printf "\n" - printf -- "-u User ID to map to user ID 0 (root).\n" - printf " is only meaningful if \n" - printf " is a directory.\n" - printf -- "-g Group ID to map to group ID 0 (root).\n" - printf " is only meaningful if \n" - printf " is a directory.\n" - printf " File list or directory for cpio archive.\n" - printf " If is not provided then a\n" - printf " a default list will be output.\n" - printf -- "-d Output the default cpio list. If no \n" - printf " is given then the default cpio list will be output.\n" - printf "\n" - printf "All options may be repeated and are interpreted sequentially\n" - printf "and immediately. -u and -g states are preserved across\n" - printf " options so an explicit \"-u 0 -g 0\" is required\n" - printf "to reset the root/group mapping.\n" +unknown_option() { + printf "ERROR: unknown option \"$arg\"\n" >&2 + printf "If the filename validly begins with '-', " >&2 + printf "then it must be prefixed\n" >&2 + printf "by './' so that it won't be interpreted as an option." >&2 + printf "\n" >&2 + usage >&2 + exit 1 +} + +list_header() { + echo "deps_initramfs := \\" +} + +header() { + printf "\n#####################\n# $1\n" >> ${output} +} + +# process one directory (incl sub-directories) +dir_filelist() { + ${dep_list}header "$1" + + srcdir=$(echo "$1" | sed -e 's://*:/:g') + dirlist=$(find "${srcdir}" -printf "%p %m %U %G\n" 2>/dev/null) + + # If $dirlist is only one line, then the directory is empty + if [ "$(echo "${dirlist}" | wc -l)" -gt 1 ]; then + ${dep_list}print_mtime "$1" + + echo "${dirlist}" | \ + while read x; do + ${dep_list}parse ${x} + done + fi } -build_list() { - printf "\n#####################\n# $cpio_source\n" - - if [ -f "$cpio_source" ]; then - print_mtime "$cpio_source" - cat "$cpio_source" - elif [ -d "$cpio_source" ]; then - srcdir=$(echo "$cpio_source" | sed -e 's://*:/:g') - dirlist=$(find "${srcdir}" -printf "%p %m %U %G\n" 2>/dev/null) - - # If $dirlist is only one line, then the directory is empty - if [ "$(echo "${dirlist}" | wc -l)" -gt 1 ]; then - print_mtime "$cpio_source" - - echo "${dirlist}" | \ - while read x; do - parse ${x} - done +# if only one file is specified and it is .cpio file then use it direct as fs +# if a directory is specified then add all files in given direcotry to fs +# if a regular file is specified assume it is in gen_initramfs format +input_file() { + source="$1" + if [ -f "$1" ]; then + ${dep_list}header "$1" + is_cpio="$(echo "$1" | sed 's/^.*\.cpio/cpio/')" + if [ $2 -eq 0 -a ${is_cpio} == "cpio" ]; then + cpio_file=$1 + [ ! -z ${dep_list} ] && echo "$1" + return 0 + fi + if [ -z ${dep_list} ]; then + print_mtime "$1" >> ${output} + cat "$1" >> ${output} else - # Failsafe in case directory is empty - default_initramfs + grep ^file "$1" | cut -d ' ' -f 3 fi + elif [ -d "$1" ]; then + dir_filelist "$1" else - echo " $0: Cannot open '$cpio_source'" >&2 + echo " ${prog}: Cannot open '$1'" >&2 exit 1 fi } - +prog=$0 root_uid=0 root_gid=0 +dep_list= +cpio_file= +cpio_list= +output="/dev/stdout" +output_file="" +arg="$1" +case "$arg" in + "-l") # files included in initramfs - used by kbuild + dep_list="list_" + shift + ;; + "-o") # generate gzipped cpio image named $1 + shift + output_file="$1" + cpio_list="$(mktemp ${TMPDIR:-/tmp}/cpiolist.XXXXXX)" + output=${cpio_list} + shift + ;; +esac while [ $# -gt 0 ]; do arg="$1" shift case "$arg" in - "-u") + "-u") # map $1 to uid=0 (root) root_uid="$1" shift ;; - "-g") + "-g") # map $1 to gid=0 (root) root_gid="$1" shift ;; - "-d") + "-d") # display default initramfs list default_list="$arg" - default_initramfs + ${dep_list}default_initramfs ;; "-h") usage @@ -181,23 +256,27 @@ while [ $# -gt 0 ]; do *) case "$arg" in "-"*) - printf "ERROR: unknown option \"$arg\"\n" >&2 - printf "If the filename validly begins with '-', then it must be prefixed\n" >&2 - printf "by './' so that it won't be interpreted as an option." >&2 - printf "\n" >&2 - usage >&2 - exit 1 + unknown_option ;; - *) - cpio_source="$arg" - build_list + *) # input file/dir - process it + input_file "$arg" "$#" ;; esac ;; esac done -# spit out the default cpio list if a source hasn't been specified -[ -z "$cpio_source" -a -z "$default_list" ] && default_initramfs - +# If output_file is set we will generate cpio archive and gzip it +# we are carefull to delete tmp files +if [ ! -z ${output_file} ]; then + if [ -z ${cpio_file} ]; then + cpio_tfile="$(mktemp ${TMPDIR:-/tmp}/cpiofile.XXXXXX)" + usr/gen_init_cpio ${cpio_list} > ${cpio_tfile} + else + cpio_tfile=${cpio_file} + fi + rm ${cpio_list} + cat ${cpio_tfile} | gzip -f -9 - > ${output_file} + [ -z ${cpio_file} ] && rm ${cpio_tfile} +fi exit 0 -- cgit v1.2.3 From 71378be91f5473e89c8be170c6e49edda3bdbb67 Mon Sep 17 00:00:00 2001 From: Paolo 'Blaisorblade' Giarrusso Date: Fri, 7 Apr 2006 16:16:40 +0200 Subject: kbuild: fix mode of checkstack.pl and other files. Make it executable like it should be. Do the same for other files intended to be executed by the user - the ones called by the build process needn't be executable as they already work (as argument to their interpreter). Signed-off-by: Paolo 'Blaisorblade' Giarrusso Signed-off-by: Sam Ravnborg --- scripts/bloat-o-meter | 0 scripts/checkstack.pl | 0 scripts/namespace.pl | 0 scripts/show_delta | 0 4 files changed, 0 insertions(+), 0 deletions(-) mode change 100644 => 100755 scripts/bloat-o-meter mode change 100644 => 100755 scripts/checkstack.pl mode change 100644 => 100755 scripts/namespace.pl mode change 100644 => 100755 scripts/show_delta (limited to 'scripts') diff --git a/scripts/bloat-o-meter b/scripts/bloat-o-meter old mode 100644 new mode 100755 diff --git a/scripts/checkstack.pl b/scripts/checkstack.pl old mode 100644 new mode 100755 diff --git a/scripts/namespace.pl b/scripts/namespace.pl old mode 100644 new mode 100755 diff --git a/scripts/show_delta b/scripts/show_delta old mode 100644 new mode 100755 -- cgit v1.2.3 From eaaae38c1ac4ccbec6d2de7255b0538f38fb29d6 Mon Sep 17 00:00:00 2001 From: Eric Sesterhenn Date: Tue, 11 Apr 2006 00:54:16 +0200 Subject: kbuild: fix NULL dereference in scripts/mod/modpost.c before is NULL in this case, concluding from the surrounding code it seems that after is the right one to use. Signed-off-by: Eric Sesterhenn Signed-off-by: Sam Ravnborg --- scripts/mod/modpost.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c index 0b92ddff26fd..7e8079a34adf 100644 --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c @@ -658,7 +658,7 @@ static void warn_sec_mismatch(const char *modname, const char *fromsec, warn("%s - Section mismatch: reference to %s:%s from %s " "before '%s' (at offset -0x%llx)\n", modname, secname, refsymname, fromsec, - elf->strtab + before->st_name, + elf->strtab + after->st_name, (long long)r.r_offset); } else { warn("%s - Section mismatch: reference to %s:%s from %s " -- cgit v1.2.3 From 40aee729b350672c2550640622416a855e27938f Mon Sep 17 00:00:00 2001 From: Roman Zippel Date: Sun, 9 Apr 2006 17:26:39 +0200 Subject: kconfig: fix default value for choice input The wrong default value can cause conf to end up in endless loop for choice questions. Signed-off-by: Roman Zippel Signed-off-by: Sam Ravnborg --- scripts/kconfig/conf.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'scripts') diff --git a/scripts/kconfig/conf.c b/scripts/kconfig/conf.c index 10eeae53d827..b86c64f90c94 100644 --- a/scripts/kconfig/conf.c +++ b/scripts/kconfig/conf.c @@ -328,8 +328,7 @@ static int conf_choice(struct menu *menu) printf("%*s%s\n", indent - 1, "", menu_get_prompt(menu)); def_sym = sym_get_choice_value(sym); cnt = def = 0; - line[0] = '0'; - line[1] = 0; + line[0] = 0; for (child = menu->list; child; child = child->next) { if (!menu_is_visible(child)) continue; -- cgit v1.2.3 From 59c6a3f4d745584f2f78cdf1f5e221a19518926c Mon Sep 17 00:00:00 2001 From: Roman Zippel Date: Sun, 9 Apr 2006 17:26:50 +0200 Subject: kconfig: revert conf behaviour change After the last patch fixed the real problem, revert this needless behaviour change of conf, which only hid the real problem. Signed-off-by: Roman Zippel Signed-off-by: Sam Ravnborg --- scripts/kconfig/conf.c | 18 ++---------------- 1 file changed, 2 insertions(+), 16 deletions(-) (limited to 'scripts') diff --git a/scripts/kconfig/conf.c b/scripts/kconfig/conf.c index b86c64f90c94..ae5ab981bb1d 100644 --- a/scripts/kconfig/conf.c +++ b/scripts/kconfig/conf.c @@ -63,20 +63,6 @@ static void check_stdin(void) } } -static char *fgets_check_stream(char *s, int size, FILE *stream) -{ - char *ret = fgets(s, size, stream); - - if (ret == NULL && feof(stream)) { - printf(_("aborted!\n\n")); - printf(_("Console input is closed. ")); - printf(_("Run 'make oldconfig' to update configuration.\n\n")); - exit(1); - } - - return ret; -} - static void conf_askvalue(struct symbol *sym, const char *def) { enum symbol_type type = sym_get_type(sym); @@ -114,7 +100,7 @@ static void conf_askvalue(struct symbol *sym, const char *def) check_stdin(); case ask_all: fflush(stdout); - fgets_check_stream(line, 128, stdin); + fgets(line, 128, stdin); return; case set_default: printf("%s\n", def); @@ -369,7 +355,7 @@ static int conf_choice(struct menu *menu) check_stdin(); case ask_all: fflush(stdout); - fgets_check_stream(line, 128, stdin); + fgets(line, 128, stdin); strip(line); if (line[0] == '?') { printf("\n%s\n", menu->sym->help ? -- cgit v1.2.3 From 94f2505be3b6afaf50129e949b1840bc4dd0b3e8 Mon Sep 17 00:00:00 2001 From: Roman Zippel Date: Sun, 9 Apr 2006 17:27:14 +0200 Subject: kconfig: recenter menuconfig Move the menuconfig output more into the centre again, it's using a fixed position depending on the window width using the fact that the menu output has to work in a 80 chars terminal. Signed-off-by: Roman Zippel Signed-off-by: Sam Ravnborg --- scripts/kconfig/lxdialog/menubox.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) (limited to 'scripts') diff --git a/scripts/kconfig/lxdialog/menubox.c b/scripts/kconfig/lxdialog/menubox.c index 09512b544375..bf8052f4fd4a 100644 --- a/scripts/kconfig/lxdialog/menubox.c +++ b/scripts/kconfig/lxdialog/menubox.c @@ -58,8 +58,7 @@ #include "dialog.h" -#define ITEM_IDENT 1 /* Indent of menu entries. Fixed for all menus */ -static int menu_width; +static int menu_width, item_x; /* * Print menu item @@ -70,7 +69,7 @@ static void do_print_item(WINDOW * win, const char *item, int choice, int j; char *menu_item = malloc(menu_width + 1); - strncpy(menu_item, item, menu_width - ITEM_IDENT); + strncpy(menu_item, item, menu_width - item_x); menu_item[menu_width] = 0; j = first_alpha(menu_item, "YyNnMmHh"); @@ -87,13 +86,13 @@ static void do_print_item(WINDOW * win, const char *item, int choice, wclrtoeol(win); #endif wattrset(win, selected ? item_selected_attr : item_attr); - mvwaddstr(win, choice, ITEM_IDENT, menu_item); + mvwaddstr(win, choice, item_x, menu_item); if (hotkey) { wattrset(win, selected ? tag_key_selected_attr : tag_key_attr); - mvwaddch(win, choice, ITEM_IDENT + j, menu_item[j]); + mvwaddch(win, choice, item_x + j, menu_item[j]); } if (selected) { - wmove(win, choice, ITEM_IDENT + 1); + wmove(win, choice, item_x + 1); } free(menu_item); wrefresh(win); @@ -227,6 +226,8 @@ int dialog_menu(const char *title, const char *prompt, int height, int width, draw_box(dialog, box_y, box_x, menu_height + 2, menu_width + 2, menubox_border_attr, menubox_attr); + item_x = (menu_width - 70) / 2; + /* Set choice to default item */ for (i = 0; i < item_no; i++) if (strcmp(current, items[i * 2]) == 0) @@ -263,10 +264,10 @@ int dialog_menu(const char *title, const char *prompt, int height, int width, wnoutrefresh(menu); print_arrows(dialog, item_no, scroll, - box_y, box_x + ITEM_IDENT + 1, menu_height); + box_y, box_x + item_x + 1, menu_height); print_buttons(dialog, height, width, 0); - wmove(menu, choice, ITEM_IDENT + 1); + wmove(menu, choice, item_x + 1); wrefresh(menu); while (key != ESC) { @@ -349,7 +350,7 @@ int dialog_menu(const char *title, const char *prompt, int height, int width, print_item(scroll + choice, choice, TRUE); print_arrows(dialog, item_no, scroll, - box_y, box_x + ITEM_IDENT + 1, menu_height); + box_y, box_x + item_x + 1, menu_height); wnoutrefresh(dialog); wrefresh(menu); -- cgit v1.2.3 From b5ac4817de3032796c558b0a32062e7392b5ea60 Mon Sep 17 00:00:00 2001 From: Roman Zippel Date: Sun, 9 Apr 2006 17:27:28 +0200 Subject: kconfig: fix typo in change count initialization Configuration needs saving when either of these conditions is true. Signed-off-by: Roman Zippel Signed-off-by: Sam Ravnborg --- scripts/kconfig/confdata.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c index 1b8882ddbc74..1b5df589f3ae 100644 --- a/scripts/kconfig/confdata.c +++ b/scripts/kconfig/confdata.c @@ -325,7 +325,7 @@ int conf_read(const char *name) sym->flags |= e->right.sym->flags & SYMBOL_NEW; } - sym_change_count = conf_warnings && conf_unsaved; + sym_change_count = conf_warnings || conf_unsaved; return 0; } -- cgit v1.2.3 From f043ca43c1ae354346f72dc5826d820d5619f0b2 Mon Sep 17 00:00:00 2001 From: Samuel Thibault Date: Wed, 12 Apr 2006 02:21:25 +0200 Subject: [PATCH] Enhancing accessibility of lxdialog For easily getting fairly good accessibility, the TTY cursor should always be left at the focus location. This patch fixes the checklist by just having the list refreshed after the dialog box (hence the cursor position remains in the list). Signed-off-by: Samuel Thibault Signed-off-by: Linus Torvalds --- scripts/kconfig/lxdialog/checklist.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) (limited to 'scripts') diff --git a/scripts/kconfig/lxdialog/checklist.c b/scripts/kconfig/lxdialog/checklist.c index db07ae73e051..be0200e9cdaf 100644 --- a/scripts/kconfig/lxdialog/checklist.c +++ b/scripts/kconfig/lxdialog/checklist.c @@ -196,8 +196,8 @@ int dialog_checklist(const char *title, const char *prompt, int height, print_buttons(dialog, height, width, 0); - wnoutrefresh(list); wnoutrefresh(dialog); + wnoutrefresh(list); doupdate(); while (key != ESC) { @@ -225,12 +225,11 @@ int dialog_checklist(const char *title, const char *prompt, int height, } scroll--; print_item(list, items[scroll * 3 + 1], status[scroll], 0, TRUE); - wnoutrefresh(list); - print_arrows(dialog, choice, item_no, scroll, box_y, box_x + check_x + 5, list_height); - wrefresh(dialog); + wnoutrefresh(dialog); + wrefresh(list); continue; /* wait for another key press */ } else @@ -252,12 +251,12 @@ int dialog_checklist(const char *title, const char *prompt, int height, scroll++; print_item(list, items[(scroll + max_choice - 1) * 3 + 1], status[scroll + max_choice - 1], max_choice - 1, TRUE); - wnoutrefresh(list); print_arrows(dialog, choice, item_no, scroll, box_y, box_x + check_x + 5, list_height); - wrefresh(dialog); + wnoutrefresh(dialog); + wrefresh(list); continue; /* wait for another key press */ } else @@ -271,8 +270,8 @@ int dialog_checklist(const char *title, const char *prompt, int height, choice = i; print_item(list, items[(scroll + choice) * 3 + 1], status[scroll + choice], choice, TRUE); - wnoutrefresh(list); - wrefresh(dialog); + wnoutrefresh(dialog); + wrefresh(list); } continue; /* wait for another key press */ } @@ -306,8 +305,8 @@ int dialog_checklist(const char *title, const char *prompt, int height, print_item(list, items[(scroll + i) * 3 + 1], status[scroll + i], i, i == choice); } - wnoutrefresh(list); - wrefresh(dialog); + wnoutrefresh(dialog); + wrefresh(list); for (i = 0; i < item_no; i++) if (status[i]) -- cgit v1.2.3 From 5ecdd0f67c624714ccd5358e1cc88324f86f0e10 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Fri, 14 Apr 2006 23:54:13 +0200 Subject: kbuild: fix false section mismatch warnings Darren Jenkins pointed out a number of false positives where we referenced variables from a _driver variable. Fix it by check for that pattern and ignore it. Randy.Dunlap pointed out a similar set of warnings for a number of scsi drivers. In scsi world they misname their variables *_template or *_sht so add these to list of variables that may have references to .init.text with no warning. Randy.Dunlap also pointed out a scsi driver with many references to .exit.text from .rodata. This is compiler generated references and we already ignore these for .init.text, so ignore them for .exit.text also. Signed-off-by: Sam Ravnborg --- scripts/mod/modpost.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'scripts') diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c index 7e8079a34adf..cd00e9f07589 100644 --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c @@ -492,17 +492,19 @@ static int strrcmp(const char *s, const char *sub) * These functions may often be marked __init and we do not want to * warn here. * the pattern is identified by: - * tosec = .init.text | .exit.text + * tosec = .init.text | .exit.text | .init.data * fromsec = .data - * atsym = *_driver, *_ops, *_probe, *probe_one + * atsym = *_driver, *_template, *_sht, *_ops, *_probe, *probe_one **/ static int secref_whitelist(const char *tosec, const char *fromsec, - const char *atsym) + const char *atsym) { int f1 = 1, f2 = 1; const char **s; const char *pat2sym[] = { "_driver", + "_template", /* scsi uses *_template a lot */ + "_sht", /* scsi also used *_sht to some extent */ "_ops", "_probe", "_probe_one", @@ -522,7 +524,8 @@ static int secref_whitelist(const char *tosec, const char *fromsec, /* Check for pattern 2 */ if ((strcmp(tosec, ".init.text") != 0) && - (strcmp(tosec, ".exit.text") != 0)) + (strcmp(tosec, ".exit.text") != 0) && + (strcmp(tosec, ".init.data") != 0)) f2 = 0; if (strcmp(fromsec, ".data") != 0) f2 = 0; @@ -820,6 +823,7 @@ static int exit_section(const char *name) * For our future {in}sanity, add a comment that this is the ppc .opd * section, not the ia64 .opd section. * ia64 .opd should not point to discarded sections. + * [.rodata] like for .init.text we ignore .rodata references -same reason **/ static int exit_section_ref_ok(const char *name) { @@ -829,6 +833,7 @@ static int exit_section_ref_ok(const char *name) ".exit.text", ".exit.data", ".init.text", + ".rodata", ".opd", /* See comment [OPD] */ ".toc1", /* used by ppc64 */ ".altinstructions", -- cgit v1.2.3 From 9dfb563b07b1aafcd7d40528ebfa7f9ce28f0556 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 18 Apr 2006 22:21:53 -0700 Subject: [PATCH] config: update usage/help info Replace outdated help message with a reference to README. Update README for make *config variants and environment variable info. Signed-off-by: Randy Dunlap Acked-by: Sam Ravnborg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/kconfig/conf.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'scripts') diff --git a/scripts/kconfig/conf.c b/scripts/kconfig/conf.c index ae5ab981bb1d..8012d1076876 100644 --- a/scripts/kconfig/conf.c +++ b/scripts/kconfig/conf.c @@ -5,6 +5,7 @@ #include #include +#include #include #include #include @@ -531,7 +532,7 @@ int main(int ac, char **av) break; case 'h': case '?': - printf("%s [-o|-s] config\n", av[0]); + fprintf(stderr, "See README for usage info\n"); exit(0); } } -- cgit v1.2.3