From 3432f9233704a66e6067944339a311744243707d Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Sun, 30 Oct 2011 15:41:59 +0200 Subject: mac80211: use min rate as basic rate for buggy APs Some buggy APs (and even P2P_GO) don't advertise their basic rates in the association response. In such case, use the min supported rate as the basic rate. Reported-by: Pontus Fuchs Signed-off-by: Eliad Peller Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'net') diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 17258feaab9b..d3b408cda08d 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1485,6 +1485,7 @@ static bool ieee80211_assoc_success(struct ieee80211_work *wk, int i, j, err; bool have_higher_than_11mbit = false; u16 ap_ht_cap_flags; + int min_rate = INT_MAX, min_rate_index = -1; /* AssocResp and ReassocResp have identical structure */ @@ -1551,6 +1552,10 @@ static bool ieee80211_assoc_success(struct ieee80211_work *wk, rates |= BIT(j); if (is_basic) basic_rates |= BIT(j); + if (rate < min_rate) { + min_rate = rate; + min_rate_index = j; + } break; } } @@ -1568,11 +1573,25 @@ static bool ieee80211_assoc_success(struct ieee80211_work *wk, rates |= BIT(j); if (is_basic) basic_rates |= BIT(j); + if (rate < min_rate) { + min_rate = rate; + min_rate_index = j; + } break; } } } + /* + * some buggy APs don't advertise basic_rates. use the lowest + * supported rate instead. + */ + if (unlikely(!basic_rates) && min_rate_index >= 0) { + printk(KERN_DEBUG "%s: No basic rates in AssocResp. " + "Using min supported rate instead.\n", sdata->name); + basic_rates = BIT(min_rate_index); + } + sta->sta.supp_rates[wk->chan->band] = rates; sdata->vif.bss_conf.basic_rates = basic_rates; -- cgit v1.2.3 From 6c7394197af90f6a332180e33f5d025d3037d883 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 3 Nov 2011 09:27:01 +0100 Subject: nl80211: fix HT capability attribute validation Since the NL80211_ATTR_HT_CAPABILITY attribute is used as a struct, it needs a minimum, not maximum length. Enforce that properly. Not doing so could potentially lead to reading after the buffer. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/nl80211.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'net') diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 48260c2d092a..b587857a9d7d 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -132,8 +132,7 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = { [NL80211_ATTR_MESH_CONFIG] = { .type = NLA_NESTED }, [NL80211_ATTR_SUPPORT_MESH_AUTH] = { .type = NLA_FLAG }, - [NL80211_ATTR_HT_CAPABILITY] = { .type = NLA_BINARY, - .len = NL80211_HT_CAPABILITY_LEN }, + [NL80211_ATTR_HT_CAPABILITY] = { .len = NL80211_HT_CAPABILITY_LEN }, [NL80211_ATTR_MGMT_SUBTYPE] = { .type = NLA_U8 }, [NL80211_ATTR_IE] = { .type = NLA_BINARY, -- cgit v1.2.3 From 133a3ff2c934223a8143bfa52401bba962a97165 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 3 Nov 2011 14:50:13 +0100 Subject: cfg80211: allow setting TXQ parameters only in AP mode In other modes the parameters should not be set. Right now, mac80211 will set them, even if the user asked for setting them on VLANs which the driver doesn't know about, causing all kinds of trouble. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/nl80211.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'net') diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index b587857a9d7d..b3a476fe8272 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -1252,6 +1252,12 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info) goto bad_res; } + if (netdev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP && + netdev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO) { + result = -EINVAL; + goto bad_res; + } + nla_for_each_nested(nl_txq_params, info->attrs[NL80211_ATTR_WIPHY_TXQ_PARAMS], rem_txq_params) { -- cgit v1.2.3 From 3b6ef6334febb05d3050a96546e635f038dbcb15 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 4 Nov 2011 11:01:46 +0100 Subject: cfg80211: fix cmp_ies When comparing two items by IE, the sort order wasn't stable, which could lead to issues in the rbtree. Make it stable by making a missing IE sort before a present IE. Also sort by length first if it differs and then by contents. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/scan.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'net') diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 0fb142410404..dc23b31594e0 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -259,17 +259,20 @@ static int cmp_ies(u8 num, u8 *ies1, size_t len1, u8 *ies2, size_t len2) { const u8 *ie1 = cfg80211_find_ie(num, ies1, len1); const u8 *ie2 = cfg80211_find_ie(num, ies2, len2); - int r; + /* equal if both missing */ if (!ie1 && !ie2) return 0; - if (!ie1 || !ie2) + /* sort missing IE before (left of) present IE */ + if (!ie1) return -1; + if (!ie2) + return 1; - r = memcmp(ie1 + 2, ie2 + 2, min(ie1[1], ie2[1])); - if (r == 0 && ie1[1] != ie2[1]) + /* sort by length first, then by contents */ + if (ie1[1] != ie2[1]) return ie2[1] - ie1[1]; - return r; + return memcmp(ie1 + 2, ie2 + 2, ie1[1]); } static bool is_bss(struct cfg80211_bss *a, -- cgit v1.2.3 From 24b9c373ab787ccacfa2c46736153708796f5cd6 Mon Sep 17 00:00:00 2001 From: "Janusz.Dziedzic@tieto.com" Date: Mon, 7 Nov 2011 09:47:47 +0200 Subject: mac80211: uAPSD - fix IEEE80211_FCTL_MOREDATA bit setting Set IEEE80211_FCTL_MOREDATA bit also in case we have buffered frames (more than one) only for one AC. Signed-off-by: Janusz Dziedzic Reviewed-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/sta_info.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'net') diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index ce962d2c8782..8eaa746ec7a2 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -1354,12 +1354,12 @@ ieee80211_sta_ps_deliver_response(struct sta_info *sta, * Use MoreData flag to indicate whether there are * more buffered frames for this STA */ - if (!more_data) - hdr->frame_control &= - cpu_to_le16(~IEEE80211_FCTL_MOREDATA); - else + if (more_data || !skb_queue_empty(&frames)) hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_MOREDATA); + else + hdr->frame_control &= + cpu_to_le16(~IEEE80211_FCTL_MOREDATA); if (ieee80211_is_data_qos(hdr->frame_control) || ieee80211_is_qos_nullfunc(hdr->frame_control)) -- cgit v1.2.3 From 4dff523a913197e3314c7b0d08734ab037709093 Mon Sep 17 00:00:00 2001 From: Arek Lichwa Date: Wed, 26 Oct 2011 11:23:22 +0200 Subject: Bluetooth: Revert: Fix L2CAP connection establishment MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit 330605423ca6eafafb8dcc27502bce1c585d1b06. The commit introduces regression when two 2.1 devices attempt establish rfcomm channel. Such connection is refused since there's a security block issue on l2cap. It means the link is unencrypted. 2011-09-16 18:08:46.567616 < ACL data: handle 1 flags 0x00 dlen 24 0000: 14 00 40 00 06 00 02 00 0f 35 03 19 12 00 ff ff ..@......5....˙˙ 0010: 35 05 0a 00 00 ff ff 00 5....˙˙. 2011-09-16 18:08:46.572377 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 1 packets 1 2011-09-16 18:08:46.577931 > ACL data: handle 1 flags 0x02 dlen 88 L2CAP(d): cid 0x0040 len 84 [psm 0] 0000: 07 00 02 00 4f 00 4c 35 4a 35 48 09 00 00 0a 00 ....O.L5J5H..... 0010: 01 00 00 09 00 01 35 03 19 12 00 09 00 05 35 03 ......5.......5. 0020: 19 10 02 09 00 09 35 08 35 06 19 12 00 09 01 02 ......5.5....... 0030: 09 02 00 09 01 02 09 02 01 09 00 0a 09 02 02 09 ................ 0040: 00 00 09 02 03 09 00 00 09 02 04 28 01 09 02 05 ...........(.... 0050: 09 00 02 00 .... 2011-09-16 18:08:46.626057 < HCI Command: Authentication Requested (0x01|0x0011) plen 2 handle 1 2011-09-16 18:08:46.627614 > HCI Event: Command Status (0x0f) plen 4 Authentication Requested (0x01|0x0011) status 0x00 ncmd 1 2011-09-16 18:08:46.627675 > HCI Event: Link Key Request (0x17) plen 6 bdaddr 00:00:F2:6A:29:69 2011-09-16 18:08:46.634999 < HCI Command: Link Key Request Reply (0x01|0x000b) plen 22 bdaddr 00:00:F2:6A:29:69 key 58CD393179FC902E5E8F512A855EE532 2011-09-16 18:08:46.683278 > HCI Event: Command Complete (0x0e) plen 10 Link Key Request Reply (0x01|0x000b) ncmd 1 status 0x00 bdaddr 00:00:F2:6A:29:69 2011-09-16 18:08:46.764729 > HCI Event: Auth Complete (0x06) plen 3 status 0x00 handle 1 2011-09-16 18:08:46.764821 < ACL data: handle 1 flags 0x00 dlen 12 0000: 08 00 01 00 02 05 04 00 03 00 41 00 ..........A. 2011-09-16 18:08:46.764851 > HCI Event: Command Status (0x0f) plen 4 Unknown (0x00|0x0000) status 0x00 ncmd 2 2011-09-16 18:08:46.768117 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 1 packets 1 2011-09-16 18:08:46.770894 > ACL data: handle 1 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0000 scid 0x0041 result 3 status 0 Connection refused - security block 2011-09-16 18:08:49.000691 < ACL data: handle 1 flags 0x00 dlen 12 0000: 08 00 01 00 06 06 04 00 40 00 40 00 ........@.@. 2011-09-16 18:08:49.015675 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 1 packets 1 2011-09-16 18:08:49.016927 > ACL data: handle 1 flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040 2011-09-16 18:08:51.009480 < HCI Command: Disconnect (0x01|0x0006) plen 3 handle 1 reason 0x13 Reason: Remote User Terminated Connection 2011-09-16 18:08:51.011525 > HCI Event: Command Status (0x0f) plen 4 Disconnect (0x01|0x0006) status 0x00 ncmd 1 2011-09-16 18:08:51.123494 > HCI Event: Disconn Complete (0x05) plen 4 status 0x00 handle 1 reason 0x16 Reason: Connection Terminated by Local Host Signed-off-by: Arek Lichwa Signed-off-by: Gustavo F. Padovan --- net/bluetooth/hci_conn.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'net') diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index c1c597e3e198..e0af7237cd92 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -673,7 +673,7 @@ int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type) goto encrypt; auth: - if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend)) + if (test_and_set_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend)) return 0; if (!hci_conn_auth(conn, sec_level, auth_type)) -- cgit v1.2.3 From f3f668b0ef4399b67e60e4c10a30099d630a6206 Mon Sep 17 00:00:00 2001 From: Andrzej Kaczmarek Date: Mon, 7 Nov 2011 17:19:04 -0200 Subject: Bluetooth: Use miliseconds for L2CAP channel timeouts Timers set by __set_chan_timer() should use miliseconds instead of jiffies. Commit 942ecc9c4643db5ce071562e0a23f99464d6b461 updated l2cap_set_timer() so it expects timeout to be specified in msecs instead of jiffies. This makes timeouts unreliable when CONFIG_HZ is not set to 1000. Signed-off-by: Andrzej Kaczmarek Signed-off-by: Gustavo F. Padovan --- net/bluetooth/l2cap_core.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'net') diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index 8cd12917733b..5ea94a1eecf2 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -251,7 +251,7 @@ static void l2cap_chan_timeout(unsigned long arg) if (sock_owned_by_user(sk)) { /* sk is owned by user. Try again later */ - __set_chan_timer(chan, HZ / 5); + __set_chan_timer(chan, L2CAP_DISC_TIMEOUT); bh_unlock_sock(sk); chan_put(chan); return; @@ -2488,7 +2488,7 @@ static inline int l2cap_connect_rsp(struct l2cap_conn *conn, struct l2cap_cmd_hd if (sock_owned_by_user(sk)) { l2cap_state_change(chan, BT_DISCONN); __clear_chan_timer(chan); - __set_chan_timer(chan, HZ / 5); + __set_chan_timer(chan, L2CAP_DISC_TIMEOUT); break; } @@ -2661,7 +2661,7 @@ static inline int l2cap_config_rsp(struct l2cap_conn *conn, struct l2cap_cmd_hdr default: sk->sk_err = ECONNRESET; - __set_chan_timer(chan, HZ * 5); + __set_chan_timer(chan, L2CAP_DISC_REJ_TIMEOUT); l2cap_send_disconn_req(conn, chan, ECONNRESET); goto done; } @@ -2718,7 +2718,7 @@ static inline int l2cap_disconnect_req(struct l2cap_conn *conn, struct l2cap_cmd if (sock_owned_by_user(sk)) { l2cap_state_change(chan, BT_DISCONN); __clear_chan_timer(chan); - __set_chan_timer(chan, HZ / 5); + __set_chan_timer(chan, L2CAP_DISC_TIMEOUT); bh_unlock_sock(sk); return 0; } @@ -2752,7 +2752,7 @@ static inline int l2cap_disconnect_rsp(struct l2cap_conn *conn, struct l2cap_cmd if (sock_owned_by_user(sk)) { l2cap_state_change(chan,BT_DISCONN); __clear_chan_timer(chan); - __set_chan_timer(chan, HZ / 5); + __set_chan_timer(chan, L2CAP_DISC_TIMEOUT); bh_unlock_sock(sk); return 0; } @@ -3998,7 +3998,7 @@ static inline void l2cap_check_encryption(struct l2cap_chan *chan, u8 encrypt) if (encrypt == 0x00) { if (chan->sec_level == BT_SECURITY_MEDIUM) { __clear_chan_timer(chan); - __set_chan_timer(chan, HZ * 5); + __set_chan_timer(chan, L2CAP_ENC_TIMEOUT); } else if (chan->sec_level == BT_SECURITY_HIGH) l2cap_chan_close(chan, ECONNREFUSED); } else { @@ -4066,7 +4066,7 @@ static int l2cap_security_cfm(struct hci_conn *hcon, u8 status, u8 encrypt) L2CAP_CONN_REQ, sizeof(req), &req); } else { __clear_chan_timer(chan); - __set_chan_timer(chan, HZ / 10); + __set_chan_timer(chan, L2CAP_DISC_TIMEOUT); } } else if (chan->state == BT_CONNECT2) { struct l2cap_conn_rsp rsp; @@ -4086,7 +4086,7 @@ static int l2cap_security_cfm(struct hci_conn *hcon, u8 status, u8 encrypt) } } else { l2cap_state_change(chan, BT_DISCONN); - __set_chan_timer(chan, HZ / 10); + __set_chan_timer(chan, L2CAP_DISC_TIMEOUT); res = L2CAP_CR_SEC_BLOCK; stat = L2CAP_CS_NO_INFO; } -- cgit v1.2.3