From b3dd8279659f14f3624bb32559782d699fa6f7d1 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sat, 10 Jun 2017 13:52:45 +0300 Subject: mac80211: don't send SMPS action frame in AP mode when not needed mac80211 allows to modify the SMPS state of an AP both, when it is started, and after it has been started. Such a change will trigger an action frame to all the peers that are currently connected, and will be remembered so that new peers will get notified as soon as they connect (since the SMPS setting in the beacon may not be the right one). This means that we need to remember the SMPS state currently requested as well as the SMPS state that was configured initially (and advertised in the beacon). The former is bss->req_smps and the latter is sdata->smps_mode. Initially, the AP interface could only be started with SMPS_OFF, which means that sdata->smps_mode was SMPS_OFF always. Later, a nl80211 API was added to be able to start an AP with a different AP mode. That code forgot to update bss->req_smps and because of that, if the AP interface was started with SMPS_DYNAMIC, we had: sdata->smps_mode = SMPS_DYNAMIC bss->req_smps = SMPS_OFF That configuration made mac80211 think it needs to fire off an action frame to any new station connecting to the AP in order to let it know that the actual SMPS configuration is SMPS_OFF. Fix that by properly setting bss->req_smps in ieee80211_start_ap. Fixes: f69931748730 ("mac80211: set smps_mode according to ap params") Signed-off-by: Emmanuel Grumbach Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg --- net/mac80211/cfg.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'net/mac80211') diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 6c2e6060cd54..4a388fe8c2d1 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -902,6 +902,8 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev, default: return -EINVAL; } + sdata->u.ap.req_smps = sdata->smps_mode; + sdata->needed_rx_chains = sdata->local->rx_chains; sdata->vif.bss_conf.beacon_int = params->beacon_interval; -- cgit v1.2.3