From ac8dd506e40ee2c7fcc61654a44c32555a0a8d6c Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 5 May 2010 09:44:02 +0200 Subject: mac80211: fix BSS info reconfiguration When reconfiguring an interface due to a previous hardware restart, mac80211 will currently include the new IBSS flag on non-IBSS interfaces which may confuse drivers. Instead of doing the ~0 trick, simply spell out which things are going to be reconfigured. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/mac80211.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/net') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 00502b1a9e38..0528615ac827 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -160,6 +160,8 @@ enum ieee80211_bss_change { BSS_CHANGED_BEACON_ENABLED = 1<<9, BSS_CHANGED_CQM = 1<<10, BSS_CHANGED_IBSS = 1<<11, + + /* when adding here, make sure to change ieee80211_reconfig */ }; /** -- cgit v1.2.3 From f444de05d20e27cdd960c13fcbcfca3099f03143 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 5 May 2010 15:25:02 +0200 Subject: cfg80211/mac80211: better channel handling Currently (all tested with hwsim) you can do stupid things like setting up an AP on a certain channel, then adding another virtual interface and making that associate on another channel -- this will make the beaconing to move channel but obviously without the necessary IEs data update. In order to improve this situation, first make the configuration APIs (cfg80211 and nl80211) aware of multi-channel operation -- we'll eventually need that in the future anyway. There's one userland API change and one API addition. The API change is that now SET_WIPHY must be called with virtual interface index rather than only wiphy index in order to take effect for that interface -- luckily all current users (hostapd) do that. For monitor interfaces, the old setting is preserved, but monitors are always slaved to other devices anyway so no guarantees. The second userland API change is the introduction of a per virtual interface SET_CHANNEL command, that hostapd should use going forward to make it easier to understand what's going on (it can automatically detect a kernel with this command). Other than mac80211, no existing cfg80211 drivers are affected by this change because they only allow a single virtual interface. mac80211, however, now needs to be aware that the channel settings are per interface now, and needs to disallow (for now) real multi-channel operation, which is another important part of this patch. One of the immediate benefits is that you can now start hostapd to operate on a hardware that already has a connection on another virtual interface, as long as you specify the same channel. Note that two things are left unhandled (this is an improvement -- not a complete fix): * different HT/no-HT modes currently you could start an HT AP and then connect to a non-HT network on the same channel which would configure the hardware for no HT; that can be fixed fairly easily * CSA An AP we're connected to on a virtual interface might indicate switching channels, and in that case we would follow it, regardless of how many other interfaces are operating; this requires more effort to fix but is pretty rare after all Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/cfg80211.h | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'include/net') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 7d10c0182f53..b44a2e5321a3 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -966,7 +966,11 @@ struct cfg80211_pmksa { * * @set_txq_params: Set TX queue parameters * - * @set_channel: Set channel + * @set_channel: Set channel for a given wireless interface. Some devices + * may support multi-channel operation (by channel hopping) so cfg80211 + * doesn't verify much. Note, however, that the passed netdev may be + * %NULL as well if the user requested changing the channel for the + * device itself, or for a monitor interface. * * @scan: Request to do a scan. If returning zero, the scan request is given * the driver, and will be valid until passed to cfg80211_scan_done(). @@ -1095,7 +1099,7 @@ struct cfg80211_ops { int (*set_txq_params)(struct wiphy *wiphy, struct ieee80211_txq_params *params); - int (*set_channel)(struct wiphy *wiphy, + int (*set_channel)(struct wiphy *wiphy, struct net_device *dev, struct ieee80211_channel *chan, enum nl80211_channel_type channel_type); @@ -1461,6 +1465,8 @@ struct cfg80211_cached_keys; * @list: (private) Used to collect the interfaces * @netdev: (private) Used to reference back to the netdev * @current_bss: (private) Used by the internal configuration code + * @channel: (private) Used by the internal configuration code to track + * user-set AP, monitor and WDS channels for wireless extensions * @bssid: (private) Used by the internal configuration code * @ssid: (private) Used by the internal configuration code * @ssid_len: (private) Used by the internal configuration code @@ -1507,6 +1513,7 @@ struct wireless_dev { struct cfg80211_internal_bss *authtry_bsses[MAX_AUTH_BSSES]; struct cfg80211_internal_bss *auth_bsses[MAX_AUTH_BSSES]; struct cfg80211_internal_bss *current_bss; /* associated / joined */ + struct ieee80211_channel *channel; bool ps; int ps_timeout; -- cgit v1.2.3 From 0aaffa9b9699894aab3266195a529baf9f96ac29 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 5 May 2010 15:28:27 +0200 Subject: mac80211: improve HT channel handling Currently, when one interface switches HT mode, all others will follow along. This is clearly undesirable, since the new one might switch to no-HT while another one is operating in HT. Address this issue by keeping track of the HT mode per interface, and allowing only changes that are compatible, i.e. switching into HT40+ is not possible when another interface is in HT40-, in that case the second one needs to fall back to HT20. Also, to allow drivers to know what's going on, store the per-interface HT mode (channel type) in the virtual interface's bss_conf. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/mac80211.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/net') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 0528615ac827..9448a5b1bb15 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -191,6 +191,9 @@ enum ieee80211_bss_change { * the current band. * @bssid: The BSSID for this BSS * @enable_beacon: whether beaconing should be enabled or not + * @channel_type: Channel type for this BSS -- the hardware might be + * configured for HT40+ while this BSS only uses no-HT, for + * example. * @ht_operation_mode: HT operation mode (like in &struct ieee80211_ht_info). * This field is only valid when the channel type is one of the HT types. * @cqm_rssi_thold: Connection quality monitor RSSI threshold, a zero value @@ -215,6 +218,7 @@ struct ieee80211_bss_conf { u16 ht_operation_mode; s32 cqm_rssi_thold; u32 cqm_rssi_hyst; + enum nl80211_channel_type channel_type; }; /** -- cgit v1.2.3