From ed919b0125b26dcc052e44836f66e7e1f5c49c7e Mon Sep 17 00:00:00 2001 From: Ohad Ben-Cohen Date: Fri, 19 Nov 2010 09:29:09 +0200 Subject: mmc: sdio: fix runtime PM anomalies by introducing MMC_CAP_POWER_OFF_CARD Some board/card/host configurations are not capable of powering off the card after boot. To support such configurations, and to allow smoother transition to runtime PM behavior, MMC_CAP_POWER_OFF_CARD is added, so hosts need to explicitly indicate whether it's OK to power off their cards after boot. SDIO core will enable runtime PM for a card only if that cap is set. As a result, the card will be powered down after boot, and will only be powered up again when a driver is loaded (and then it's up to the driver to decide whether power will be kept or not). This will prevent sdio_bus_probe() failures with setups that do not support powering off the card. Reported-and-tested-by: Daniel Drake Reported-and-tested-by: Arnd Hannemann Signed-off-by: Ohad Ben-Cohen Signed-off-by: Chris Ball --- include/linux/mmc/host.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 6d87f68ce4b6..30f6fad99a58 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -168,6 +168,7 @@ struct mmc_host { /* DDR mode at 1.8V */ #define MMC_CAP_1_2V_DDR (1 << 12) /* can support */ /* DDR mode at 1.2V */ +#define MMC_CAP_POWER_OFF_CARD (1 << 13) /* Can power off after boot */ mmc_pm_flag_t pm_caps; /* supported pm features */ -- cgit v1.2.3