From 3af0dbd592fe0a92002f16e341519ba03e92adf7 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Mon, 1 Sep 2014 11:19:52 +0800 Subject: gpio: mcp23s08 to support both device tree and platform data Device tree is not enabled in some architecture where gpio driver mcp23s08 is still required. v2-changes: - Parse device tree properties into platform data other than individual variables. v3-changes: - Use of_node in gpio_chip device structure, because the struct device * always has an of_node which is NULL when OF is not used. Signed-off-by: Sonic Zhang Reviewed-by: Alexandre Courbot Signed-off-by: Linus Walleij --- include/linux/spi/mcp23s08.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'include/linux/spi') diff --git a/include/linux/spi/mcp23s08.h b/include/linux/spi/mcp23s08.h index 2d676d5aaa89..aa07d7b32568 100644 --- a/include/linux/spi/mcp23s08.h +++ b/include/linux/spi/mcp23s08.h @@ -22,4 +22,22 @@ struct mcp23s08_platform_data { * base to base+15 (or base+31 for s17 variant). */ unsigned base; + /* Marks the device as a interrupt controller. + * NOTE: The interrupt functionality is only supported for i2c + * versions of the chips. The spi chips can also do the interrupts, + * but this is not supported by the linux driver yet. + */ + bool irq_controller; + + /* Sets the mirror flag in the IOCON register. Devices + * with two interrupt outputs (these are the devices ending with 17 and + * those that have 16 IOs) have two IO banks: IO 0-7 form bank 1 and + * IO 8-15 are bank 2. These chips have two different interrupt outputs: + * One for bank 1 and another for bank 2. If irq-mirror is set, both + * interrupts are generated regardless of the bank that an input change + * occurred on. If it is not set, the interrupt are only generated for + * the bank they belong to. + * On devices with only one interrupt output this property is useless. + */ + bool mirror; }; -- cgit v1.2.3