From 896111dc4bcf887b835b3ef54f48b450d4692a1d Mon Sep 17 00:00:00 2001 From: Sean Young Date: Sun, 20 Dec 2020 13:29:54 +0100 Subject: media: rc: ensure that uevent can be read directly after rc device register There is a race condition where if the /sys/class/rc0/uevent file is read before rc_dev->registered is set to true, -ENODEV will be returned. Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1901089 Cc: stable@vger.kernel.org Fixes: a2e2d73fa281 ("media: rc: do not access device via sysfs after rc_unregister_device()") Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/rc-main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c index 1d811e5ffb55..29d4d01896ff 100644 --- a/drivers/media/rc/rc-main.c +++ b/drivers/media/rc/rc-main.c @@ -1928,6 +1928,8 @@ int rc_register_device(struct rc_dev *dev) goto out_raw; } + dev->registered = true; + rc = device_add(&dev->dev); if (rc) goto out_rx_free; @@ -1937,8 +1939,6 @@ int rc_register_device(struct rc_dev *dev) dev->device_name ?: "Unspecified device", path ?: "N/A"); kfree(path); - dev->registered = true; - /* * once the the input device is registered in rc_setup_rx_device, * userspace can open the input device and rc_open() will be called -- cgit v1.2.3 From ff474acc4b1a9a15e29c42a41942e6932fa4f01f Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Fri, 11 Dec 2020 23:21:28 +0100 Subject: media: ccs-pll: Fix link frequency for C-PHY The highest fundamental frequency signal for C-PHY is half of the symbol rate which is similar to D-PHY. Take this into account in ccs-pll. Also remove the outdated comment. Fixes: 8030aa4f9c51 ("media: ccs-pll: Add C-PHY support") Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab --- drivers/media/i2c/ccs-pll.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/media/i2c/ccs-pll.c b/drivers/media/i2c/ccs-pll.c index eb7b6f01f623..58ca47e904a1 100644 --- a/drivers/media/i2c/ccs-pll.c +++ b/drivers/media/i2c/ccs-pll.c @@ -772,14 +772,8 @@ int ccs_pll_calculate(struct device *dev, const struct ccs_pll_limits *lim, switch (pll->bus_type) { case CCS_PLL_BUS_TYPE_CSI2_DPHY: - /* CSI transfers 2 bits per clock per lane; thus times 2 */ - op_sys_clk_freq_hz_sdr = pll->link_freq * 2 - * (pll->flags & CCS_PLL_FLAG_LANE_SPEED_MODEL ? - 1 : pll->csi2.lanes); - break; case CCS_PLL_BUS_TYPE_CSI2_CPHY: - op_sys_clk_freq_hz_sdr = - pll->link_freq + op_sys_clk_freq_hz_sdr = pll->link_freq * 2 * (pll->flags & CCS_PLL_FLAG_LANE_SPEED_MODEL ? 1 : pll->csi2.lanes); break; -- cgit v1.2.3 From 1bc0b1baf26efa23c0fd6fdcc24297e7d94f37ac Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Tue, 15 Dec 2020 21:31:12 +0100 Subject: media: ccs: Get static data version minor correctly Fix obtaining CCS static data version minor part correctly. Instead, the upper 8 bits were obtained from the major version number. Fixes: a6b396f410b1 ("media: ccs: Add CCS static data parser library") Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab --- drivers/media/i2c/ccs/ccs-data.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/i2c/ccs/ccs-data.c b/drivers/media/i2c/ccs/ccs-data.c index 9a6097b088bd..6555bd4b325a 100644 --- a/drivers/media/i2c/ccs/ccs-data.c +++ b/drivers/media/i2c/ccs/ccs-data.c @@ -152,7 +152,7 @@ static int ccs_data_parse_version(struct bin_container *bin, vv->version_major = ((u16)v->static_data_version_major[0] << 8) + v->static_data_version_major[1]; vv->version_minor = ((u16)v->static_data_version_minor[0] << 8) + - v->static_data_version_major[1]; + v->static_data_version_minor[1]; vv->date_year = ((u16)v->year[0] << 8) + v->year[1]; vv->date_month = v->month; vv->date_day = v->day; -- cgit v1.2.3 From e99a8f0f6344fee25cd30907c30ac0ca2f02804d Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Fri, 4 Dec 2020 18:38:33 +0100 Subject: media: rcar-vin: fix return, use ret instead of zero MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently the return error code is in ret is being assigned but not used. It and should be returned by the return statement and currently just 0 is being returned. Fix this. Addresses-Coverity: ("Unused value") Fixes: b9ad52aafe38 ("media: rcar-vin: Rework parallel firmware parsing") Signed-off-by: Colin Ian King Reviewed-by: Niklas Söderlund Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/rcar-vin/rcar-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/platform/rcar-vin/rcar-core.c b/drivers/media/platform/rcar-vin/rcar-core.c index 98bff765b02e..e48d666f2c63 100644 --- a/drivers/media/platform/rcar-vin/rcar-core.c +++ b/drivers/media/platform/rcar-vin/rcar-core.c @@ -654,7 +654,7 @@ static int rvin_parallel_parse_of(struct rvin_dev *vin) out: fwnode_handle_put(fwnode); - return 0; + return ret; } static int rvin_parallel_init(struct rvin_dev *vin) -- cgit v1.2.3 From 2984a99ff1c071c85dc09451c8adc859c22fbb96 Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Thu, 17 Dec 2020 18:57:05 +0100 Subject: media: v4l: common: Fix naming of v4l2_get_link_rate Rename v4l2_get_link_rate() as v4l2_get_link_freq(). What the function returns is the frequency of the link; rename it to reflect the name of the control where the information is obtained. Fixes: 1b888b3cebef ("media: v4l: Add a helper for obtaining the link frequency") Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab --- drivers/media/pci/intel/ipu3/ipu3-cio2.c | 2 +- drivers/media/v4l2-core/v4l2-common.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/media/pci/intel/ipu3/ipu3-cio2.c b/drivers/media/pci/intel/ipu3/ipu3-cio2.c index 36e354ecf71e..6cada8a6e50c 100644 --- a/drivers/media/pci/intel/ipu3/ipu3-cio2.c +++ b/drivers/media/pci/intel/ipu3/ipu3-cio2.c @@ -302,7 +302,7 @@ static int cio2_csi2_calc_timing(struct cio2_device *cio2, struct cio2_queue *q, if (!q->sensor) return -ENODEV; - freq = v4l2_get_link_rate(q->sensor->ctrl_handler, bpp, lanes); + freq = v4l2_get_link_freq(q->sensor->ctrl_handler, bpp, lanes); if (freq < 0) { dev_err(dev, "error %lld, invalid link_freq\n", freq); return freq; diff --git a/drivers/media/v4l2-core/v4l2-common.c b/drivers/media/v4l2-core/v4l2-common.c index 78007dba4677..133d20e40f82 100644 --- a/drivers/media/v4l2-core/v4l2-common.c +++ b/drivers/media/v4l2-core/v4l2-common.c @@ -442,7 +442,7 @@ int v4l2_fill_pixfmt(struct v4l2_pix_format *pixfmt, u32 pixelformat, } EXPORT_SYMBOL_GPL(v4l2_fill_pixfmt); -s64 v4l2_get_link_rate(struct v4l2_ctrl_handler *handler, unsigned int mul, +s64 v4l2_get_link_freq(struct v4l2_ctrl_handler *handler, unsigned int mul, unsigned int div) { struct v4l2_ctrl *ctrl; @@ -473,4 +473,4 @@ s64 v4l2_get_link_rate(struct v4l2_ctrl_handler *handler, unsigned int mul, return freq > 0 ? freq : -EINVAL; } -EXPORT_SYMBOL_GPL(v4l2_get_link_rate); +EXPORT_SYMBOL_GPL(v4l2_get_link_freq); -- cgit v1.2.3 From 06b831588b639ad9d94e4789b0250562228722c2 Mon Sep 17 00:00:00 2001 From: Matthias Reichl Date: Tue, 5 Jan 2021 10:30:23 +0100 Subject: media: rc: fix timeout handling after switch to microsecond durations Commit 528222d853f92 ("media: rc: harmonize infrared durations to microseconds") missed to switch some timeout calculations from nanoseconds to microseconds. This resulted in spurious key_up+key_down events at the last scancode if the rc device uses a long timeout (eg 100ms on nuvoton-cir) as the device timeout wasn't properly accounted for in the keyup timeout calculation. Fix this by applying the proper conversion functions. Cc: stable@vger.kernel.org Fixes: 528222d853f92 ("media: rc: harmonize infrared durations to microseconds") Signed-off-by: Matthias Reichl Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/ir-mce_kbd-decoder.c | 2 +- drivers/media/rc/rc-main.c | 4 ++-- drivers/media/rc/serial_ir.c | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/media/rc/ir-mce_kbd-decoder.c b/drivers/media/rc/ir-mce_kbd-decoder.c index be8f2756a444..1524dc0fc566 100644 --- a/drivers/media/rc/ir-mce_kbd-decoder.c +++ b/drivers/media/rc/ir-mce_kbd-decoder.c @@ -320,7 +320,7 @@ again: data->body); spin_lock(&data->keylock); if (scancode) { - delay = nsecs_to_jiffies(dev->timeout) + + delay = usecs_to_jiffies(dev->timeout) + msecs_to_jiffies(100); mod_timer(&data->rx_timeout, jiffies + delay); } else { diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c index 29d4d01896ff..1fd62c1dac76 100644 --- a/drivers/media/rc/rc-main.c +++ b/drivers/media/rc/rc-main.c @@ -737,7 +737,7 @@ static unsigned int repeat_period(int protocol) void rc_repeat(struct rc_dev *dev) { unsigned long flags; - unsigned int timeout = nsecs_to_jiffies(dev->timeout) + + unsigned int timeout = usecs_to_jiffies(dev->timeout) + msecs_to_jiffies(repeat_period(dev->last_protocol)); struct lirc_scancode sc = { .scancode = dev->last_scancode, .rc_proto = dev->last_protocol, @@ -855,7 +855,7 @@ void rc_keydown(struct rc_dev *dev, enum rc_proto protocol, u64 scancode, ir_do_keydown(dev, protocol, scancode, keycode, toggle); if (dev->keypressed) { - dev->keyup_jiffies = jiffies + nsecs_to_jiffies(dev->timeout) + + dev->keyup_jiffies = jiffies + usecs_to_jiffies(dev->timeout) + msecs_to_jiffies(repeat_period(protocol)); mod_timer(&dev->timer_keyup, dev->keyup_jiffies); } diff --git a/drivers/media/rc/serial_ir.c b/drivers/media/rc/serial_ir.c index 8cc28c92d05d..96ae0294ac10 100644 --- a/drivers/media/rc/serial_ir.c +++ b/drivers/media/rc/serial_ir.c @@ -385,7 +385,7 @@ static irqreturn_t serial_ir_irq_handler(int i, void *blah) } while (!(sinp(UART_IIR) & UART_IIR_NO_INT)); /* still pending ? */ mod_timer(&serial_ir.timeout_timer, - jiffies + nsecs_to_jiffies(serial_ir.rcdev->timeout)); + jiffies + usecs_to_jiffies(serial_ir.rcdev->timeout)); ir_raw_event_handle(serial_ir.rcdev); -- cgit v1.2.3 From 9eb09dc2f4650de8c6ce286d3153511e6f6314c0 Mon Sep 17 00:00:00 2001 From: Stanimir Varbanov Date: Tue, 15 Dec 2020 15:07:44 +0100 Subject: media: venus: core: Fix platform driver shutdown With TZ system reboot cannot finish successfully. To fix that enable core clocks by runtime pm before TZ calls and disable clocks after that. Tested-by: Shawn Guo Signed-off-by: Stanimir Varbanov Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/qcom/venus/core.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c index bdd293faaad0..7233a7311757 100644 --- a/drivers/media/platform/qcom/venus/core.c +++ b/drivers/media/platform/qcom/venus/core.c @@ -349,8 +349,10 @@ static void venus_core_shutdown(struct platform_device *pdev) { struct venus_core *core = platform_get_drvdata(pdev); + pm_runtime_get_sync(core->dev); venus_shutdown(core); venus_firmware_deinit(core); + pm_runtime_put_sync(core->dev); } static __maybe_unused int venus_runtime_suspend(struct device *dev) -- cgit v1.2.3 From e1def45b5291278590bc3033cc518bf5c964a18d Mon Sep 17 00:00:00 2001 From: Matthias Reichl Date: Sat, 9 Jan 2021 21:10:55 +0100 Subject: media: rc: ite-cir: fix min_timeout calculation Commit 528222d853f92 ("media: rc: harmonize infrared durations to microseconds") missed to switch the min_timeout calculation from ns to us. This resulted in a minimum timeout of 1.2 seconds instead of 1.2ms, leading to large delays and long key repeats. Fix this by applying proper ns->us conversion. Cc: stable@vger.kernel.org Fixes: 528222d853f92 ("media: rc: harmonize infrared durations to microseconds") Signed-off-by: Matthias Reichl Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/ite-cir.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/rc/ite-cir.c b/drivers/media/rc/ite-cir.c index a905113fef6e..0c6229592e13 100644 --- a/drivers/media/rc/ite-cir.c +++ b/drivers/media/rc/ite-cir.c @@ -1551,7 +1551,7 @@ static int ite_probe(struct pnp_dev *pdev, const struct pnp_device_id rdev->s_rx_carrier_range = ite_set_rx_carrier_range; /* FIFO threshold is 17 bytes, so 17 * 8 samples minimum */ rdev->min_timeout = 17 * 8 * ITE_BAUDRATE_DIVISOR * - itdev->params.sample_period; + itdev->params.sample_period / 1000; rdev->timeout = IR_DEFAULT_TIMEOUT; rdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT; rdev->rx_resolution = ITE_BAUDRATE_DIVISOR * -- cgit v1.2.3 From 95e9295daa849095d8be05fb6e26b2ba9be1594f Mon Sep 17 00:00:00 2001 From: Naushir Patuck Date: Wed, 6 Jan 2021 16:16:57 +0100 Subject: media: Revert "media: videobuf2: Fix length check for single plane dmabuf queueing" The updated length check for dmabuf types broke existing usage in v4l2 userland clients. Fixes: 961d3b27 ("media: videobuf2: Fix length check for single plane dmabuf queueing") Cc: stable@vger.kernel.org Signed-off-by: Naushir Patuck Tested-by: Kieran Bingham Reviewed-by: Kieran Bingham Reviewed-by: Laurent Pinchart Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/videobuf2/videobuf2-v4l2.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/common/videobuf2/videobuf2-v4l2.c b/drivers/media/common/videobuf2/videobuf2-v4l2.c index 96d3b2b2aa31..3f61f5863bf7 100644 --- a/drivers/media/common/videobuf2/videobuf2-v4l2.c +++ b/drivers/media/common/videobuf2/videobuf2-v4l2.c @@ -118,8 +118,7 @@ static int __verify_length(struct vb2_buffer *vb, const struct v4l2_buffer *b) return -EINVAL; } } else { - length = (b->memory == VB2_MEMORY_USERPTR || - b->memory == VB2_MEMORY_DMABUF) + length = (b->memory == VB2_MEMORY_USERPTR) ? b->length : vb->planes[0].length; if (b->bytesused > length) -- cgit v1.2.3 From 73bc0b0c2a96b31199da0ce6c3d04be81ef73bb9 Mon Sep 17 00:00:00 2001 From: Jernej Skrabec Date: Wed, 23 Dec 2020 12:06:59 +0100 Subject: media: cedrus: Fix H264 decoding During H264 API overhaul subtle bug was introduced Cedrus driver. Progressive references have both, top and bottom reference flags set. Cedrus reference list expects only bottom reference flag and only when interlaced frames are decoded. However, due to a bug in Cedrus check, exclusivity is not tested and that flag is set also for progressive references. That causes "jumpy" background with many videos. Fix that by checking that only bottom reference flag is set in control and nothing else. Tested-by: Andre Heider Fixes: cfc8c3ed533e ("media: cedrus: h264: Properly configure reference field") Signed-off-by: Jernej Skrabec Signed-off-by: Hans Verkuil Cc: Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/sunxi/cedrus/cedrus_h264.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_h264.c b/drivers/staging/media/sunxi/cedrus/cedrus_h264.c index 781c84a9b1b7..de7442d4834d 100644 --- a/drivers/staging/media/sunxi/cedrus/cedrus_h264.c +++ b/drivers/staging/media/sunxi/cedrus/cedrus_h264.c @@ -203,7 +203,7 @@ static void _cedrus_write_ref_list(struct cedrus_ctx *ctx, position = cedrus_buf->codec.h264.position; sram_array[i] |= position << 1; - if (ref_list[i].fields & V4L2_H264_BOTTOM_FIELD_REF) + if (ref_list[i].fields == V4L2_H264_BOTTOM_FIELD_REF) sram_array[i] |= BIT(0); } -- cgit v1.2.3 From eaf18a4165141f04dd26f0c48a7e53438e5a3ea2 Mon Sep 17 00:00:00 2001 From: Yannick Fertre Date: Fri, 15 Jan 2021 15:31:44 +0100 Subject: media: cec: add stm32 driver Missing stm32 directory to Makefile. Signed-off-by: Yannick Fertre Signed-off-by: Hans Verkuil Fixes: 4be5e8648b0c ("media: move CEC platform drivers to a separate directory") Cc: Signed-off-by: Mauro Carvalho Chehab --- drivers/media/cec/platform/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/media/cec/platform/Makefile b/drivers/media/cec/platform/Makefile index 3a947159b25a..ea6f8ee8161c 100644 --- a/drivers/media/cec/platform/Makefile +++ b/drivers/media/cec/platform/Makefile @@ -10,5 +10,6 @@ obj-$(CONFIG_CEC_MESON_AO) += meson/ obj-$(CONFIG_CEC_SAMSUNG_S5P) += s5p/ obj-$(CONFIG_CEC_SECO) += seco/ obj-$(CONFIG_CEC_STI) += sti/ +obj-$(CONFIG_CEC_STM32) += stm32/ obj-$(CONFIG_CEC_TEGRA) += tegra/ -- cgit v1.2.3 From e081863ab48d9b2eee9e899cbd05752a2a30308d Mon Sep 17 00:00:00 2001 From: Ricardo Ribalda Date: Thu, 14 Jan 2021 14:03:16 +0100 Subject: media: hantro: Fix reset_raw_fmt initialization raw_fmt->height in never initialized. But width in initialized twice. Fixes: 88d06362d1d05 ("media: hantro: Refactor for V4L2 API spec compliancy") Signed-off-by: Ricardo Ribalda Signed-off-by: Hans Verkuil Cc: Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/hantro/hantro_v4l2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/media/hantro/hantro_v4l2.c b/drivers/staging/media/hantro/hantro_v4l2.c index b668a82d40ad..f5fbdbc4ffdb 100644 --- a/drivers/staging/media/hantro/hantro_v4l2.c +++ b/drivers/staging/media/hantro/hantro_v4l2.c @@ -367,7 +367,7 @@ hantro_reset_raw_fmt(struct hantro_ctx *ctx) hantro_reset_fmt(raw_fmt, raw_vpu_fmt); raw_fmt->width = encoded_fmt->width; - raw_fmt->width = encoded_fmt->width; + raw_fmt->height = encoded_fmt->height; if (ctx->is_encoder) hantro_set_fmt_out(ctx, raw_fmt); else -- cgit v1.2.3