From e365280521029c9366bab038915274ddaa1b7195 Mon Sep 17 00:00:00 2001 From: Nisar Sayed Date: Thu, 21 Sep 2017 02:36:38 +0530 Subject: lan78xx: Use default values loaded from EEPROM/OTP after reset Use default value of auto duplex and auto speed values loaded from EEPROM/OTP after reset. The LAN78xx allows platform configurations to be loaded from EEPROM/OTP. Ex: When external phy is connected, the MAC can be configured to have correct auto speed, auto duplex, auto polarity configured from the EEPROM/OTP. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Nisar Sayed Signed-off-by: David S. Miller --- drivers/net/usb/lan78xx.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c index f8c63eec8353..0161f77641fa 100644 --- a/drivers/net/usb/lan78xx.c +++ b/drivers/net/usb/lan78xx.c @@ -2449,7 +2449,6 @@ static int lan78xx_reset(struct lan78xx_net *dev) /* LAN7801 only has RGMII mode */ if (dev->chipid == ID_REV_CHIP_ID_7801_) buf &= ~MAC_CR_GMII_EN_; - buf |= MAC_CR_AUTO_DUPLEX_ | MAC_CR_AUTO_SPEED_; ret = lan78xx_write_reg(dev, MAC_CR, buf); ret = lan78xx_read_reg(dev, MAC_TX, &buf); -- cgit v1.2.3