From 9abd29e7c13de24ce73213a425d9574b35ac0c6a Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Wed, 25 Nov 2015 16:58:18 +0100 Subject: i2c: rk3x: populate correct variable for sda_falling_time Signed-off-by: Wolfram Sang Reviewed-by: Douglas Anderson Cc: stable@kernel.org --- drivers/i2c/busses/i2c-rk3x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c index c1935ebd6a9c..9096d17beb5b 100644 --- a/drivers/i2c/busses/i2c-rk3x.c +++ b/drivers/i2c/busses/i2c-rk3x.c @@ -908,7 +908,7 @@ static int rk3x_i2c_probe(struct platform_device *pdev) &i2c->scl_fall_ns)) i2c->scl_fall_ns = 300; if (of_property_read_u32(pdev->dev.of_node, "i2c-sda-falling-time-ns", - &i2c->scl_fall_ns)) + &i2c->sda_fall_ns)) i2c->sda_fall_ns = i2c->scl_fall_ns; strlcpy(i2c->adap.name, "rk3x-i2c", sizeof(i2c->adap.name)); -- cgit v1.2.3 From bba61f50f76574ca5b84b310925be7c2e8e64275 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 27 Sep 2015 16:57:08 +0200 Subject: i2c: mv64xxx: The n clockdiv factor is 0 based on sunxi SoCs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit According to the datasheets the n factor for dividing the tclk is 2 to the power n on Allwinner SoCs, not 2 to the power n + 1 as it is on other mv64xxx implementations. I've contacted Allwinner about this and they have confirmed that the datasheet is correct. This commit fixes the clk-divider calculations for Allwinner SoCs accordingly. Signed-off-by: Hans de Goede Acked-by: Maxime Ripard Tested-by: Olliver Schinagl Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/busses/i2c-mv64xxx.c | 27 ++++++++++++++++++--------- 1 file changed, 18 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c index 5801227b97ab..43207f52e5a3 100644 --- a/drivers/i2c/busses/i2c-mv64xxx.c +++ b/drivers/i2c/busses/i2c-mv64xxx.c @@ -146,6 +146,8 @@ struct mv64xxx_i2c_data { bool errata_delay; struct reset_control *rstc; bool irq_clear_inverted; + /* Clk div is 2 to the power n, not 2 to the power n + 1 */ + bool clk_n_base_0; }; static struct mv64xxx_i2c_regs mv64xxx_i2c_regs_mv64xxx = { @@ -757,25 +759,29 @@ MODULE_DEVICE_TABLE(of, mv64xxx_i2c_of_match_table); #ifdef CONFIG_OF #ifdef CONFIG_HAVE_CLK static int -mv64xxx_calc_freq(const int tclk, const int n, const int m) +mv64xxx_calc_freq(struct mv64xxx_i2c_data *drv_data, + const int tclk, const int n, const int m) { - return tclk / (10 * (m + 1) * (2 << n)); + if (drv_data->clk_n_base_0) + return tclk / (10 * (m + 1) * (1 << n)); + else + return tclk / (10 * (m + 1) * (2 << n)); } static bool -mv64xxx_find_baud_factors(const u32 req_freq, const u32 tclk, u32 *best_n, - u32 *best_m) +mv64xxx_find_baud_factors(struct mv64xxx_i2c_data *drv_data, + const u32 req_freq, const u32 tclk) { int freq, delta, best_delta = INT_MAX; int m, n; for (n = 0; n <= 7; n++) for (m = 0; m <= 15; m++) { - freq = mv64xxx_calc_freq(tclk, n, m); + freq = mv64xxx_calc_freq(drv_data, tclk, n, m); delta = req_freq - freq; if (delta >= 0 && delta < best_delta) { - *best_m = m; - *best_n = n; + drv_data->freq_m = m; + drv_data->freq_n = n; best_delta = delta; } if (best_delta == 0) @@ -813,8 +819,11 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data, if (of_property_read_u32(np, "clock-frequency", &bus_freq)) bus_freq = 100000; /* 100kHz by default */ - if (!mv64xxx_find_baud_factors(bus_freq, tclk, - &drv_data->freq_n, &drv_data->freq_m)) { + if (of_device_is_compatible(np, "allwinner,sun4i-a10-i2c") || + of_device_is_compatible(np, "allwinner,sun6i-a31-i2c")) + drv_data->clk_n_base_0 = true; + + if (!mv64xxx_find_baud_factors(drv_data, bus_freq, tclk)) { rc = -EINVAL; goto out; } -- cgit v1.2.3 From 87cb5b425fa32094972868b50e65083c586509a3 Mon Sep 17 00:00:00 2001 From: Alexander Sverdlin Date: Mon, 30 Nov 2015 15:51:00 +0100 Subject: i2c: davinci: Increase module clock frequency I2C controller used in Keystone SoC has an undocumented peculiarity which results in SDA-SCL margins being dependent on module clock. Driving high capacity bus near its limits can result in STOP condition sometimes being understood as REPEATED-START by slaves (or NACK instead of ACK, etc...). Driving the module with higher clocks increases the margin between SDA and SCL transitions, making the operations with higher bus rates more robust. Therefore, target the module clock to 12MHz instead of 7MHz, still staying within the specification limits. Before the change STOP timing looked like this on 400kHz: SDA ----------+ +---- \ / \ / +----+ (1) SCL --+ +------------ \ / \ / +----+ (2) While only point (1) signals STOP, point (2) could be incorrectly recognized as repeated-START (almost no margin between SDA and SCL transitions). After the change there is at least 600ns margin measured between SCL fall and SDA fall during STOP generation: SDA ------+ +---- \ / \ / +----+ SCL --+ +-------- \ / \ / +----+ ->| |<- 600ns ->| |<- tSUSTO So called tSUSTO (setup time for STOP condition) is still slightly higher than 600ns, so no problem here. Signed-off-by: Alexander Sverdlin Acked-by: Santosh Shilimkar Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-davinci.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index c5628a42170a..a8bdcb5292f5 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -202,8 +202,15 @@ static void i2c_davinci_calc_clk_dividers(struct davinci_i2c_dev *dev) * d is always 6 on Keystone I2C controller */ - /* get minimum of 7 MHz clock, but max of 12 MHz */ - psc = (input_clock / 7000000) - 1; + /* + * Both Davinci and current Keystone User Guides recommend a value + * between 7MHz and 12MHz. In reality 7MHz module clock doesn't + * always produce enough margin between SDA and SCL transitions. + * Measurements show that the higher the module clock is, the + * bigger is the margin, providing more reliable communication. + * So we better target for 12MHz. + */ + psc = (input_clock / 12000000) - 1; if ((input_clock / (psc + 1)) > 12000000) psc++; /* better to run under spec than over */ d = (psc >= 2) ? 5 : 7 - psc; -- cgit v1.2.3 From a07f0ad7895303ec37155655229ca2a07080d135 Mon Sep 17 00:00:00 2001 From: "Dmitry V. Krivenok" Date: Mon, 30 Nov 2015 23:45:46 +0300 Subject: i2c: do not use 0x in front of %pa Signed-off-by: Dmitry V. Krivenok Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-st.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-st.c b/drivers/i2c/busses/i2c-st.c index ea72dca32fdf..25020ec777c9 100644 --- a/drivers/i2c/busses/i2c-st.c +++ b/drivers/i2c/busses/i2c-st.c @@ -822,7 +822,7 @@ static int st_i2c_probe(struct platform_device *pdev) adap = &i2c_dev->adap; i2c_set_adapdata(adap, i2c_dev); - snprintf(adap->name, sizeof(adap->name), "ST I2C(0x%pa)", &res->start); + snprintf(adap->name, sizeof(adap->name), "ST I2C(%pa)", &res->start); adap->owner = THIS_MODULE; adap->timeout = 2 * HZ; adap->retries = 0; -- cgit v1.2.3 From 5212f9ae519a3e108205f27eb22929266e688e3e Mon Sep 17 00:00:00 2001 From: Gao Pan Date: Wed, 9 Dec 2015 11:08:22 +0800 Subject: i2c: imx: init bus recovery info before adding i2c adapter MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit During driver probe, i2c_imx_init_recovery_info() must come before i2c_add_numbered_adapter(), because the get/set_scl() functions are assigned in i2c_register_adapter() under the conditon that bus recover_info are initialized. Otherwise, get/set_scl() function pointers never get assigned. In such case, when i2c_generic_gpio_recovery() is used for bus recovery, there will be kernel crash because bri->set_scl is NULL. The solution to this bug is moving i2c_imx_init_recovery_info() before i2c_register_adapter(). Signed-off-by: Gao Pan Signed-off-by: Fugang Duan Acked-by: Uwe Kleine-König Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/busses/i2c-imx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 9bb0b056b25f..d4d853680ae4 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -1119,6 +1119,8 @@ static int i2c_imx_probe(struct platform_device *pdev) i2c_imx, IMX_I2C_I2CR); imx_i2c_write_reg(i2c_imx->hwdata->i2sr_clr_opcode, i2c_imx, IMX_I2C_I2SR); + i2c_imx_init_recovery_info(i2c_imx, pdev); + /* Add I2C adapter */ ret = i2c_add_numbered_adapter(&i2c_imx->adapter); if (ret < 0) { @@ -1126,8 +1128,6 @@ static int i2c_imx_probe(struct platform_device *pdev) goto clk_disable; } - i2c_imx_init_recovery_info(i2c_imx, pdev); - /* Set up platform driver data */ platform_set_drvdata(pdev, i2c_imx); clk_disable_unprepare(i2c_imx->clk); -- cgit v1.2.3 From 2d244c81481fa5142a2ba6656ab7a8e40c849c27 Mon Sep 17 00:00:00 2001 From: Xiangliang Yu Date: Fri, 11 Dec 2015 20:02:53 +0800 Subject: i2c: designware: fix IO timeout issue for AMD controller Because of some hardware limitation, AMD I2C controller can't trigger pending interrupt if interrupt status has been changed after clearing interrupt status bits. Then, I2C will lost interrupt and IO timeout. According to hardware design, this patch implements a workaround to disable i2c controller interrupt and re-enable i2c interrupt before exiting ISR. To reduce the performance impacts on other vendors, use unlikely function to check flag in ISR. Signed-off-by: Xiangliang Yu Acked-by: Jarkko Nikula Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/busses/i2c-designware-core.c | 6 ++++++ drivers/i2c/busses/i2c-designware-core.h | 1 + drivers/i2c/busses/i2c-designware-platdrv.c | 7 ++++++- 3 files changed, 13 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c index 8c48b27ba059..de7fbbb374cd 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -813,6 +813,12 @@ static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id) tx_aborted: if ((stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET)) || dev->msg_err) complete(&dev->cmd_complete); + else if (unlikely(dev->accessor_flags & ACCESS_INTR_MASK)) { + /* workaround to trigger pending interrupt */ + stat = dw_readl(dev, DW_IC_INTR_MASK); + i2c_dw_disable_int(dev); + dw_writel(dev, stat, DW_IC_INTR_MASK); + } return IRQ_HANDLED; } diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index 1d50898e7b24..9ffb63a60f95 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -111,6 +111,7 @@ struct dw_i2c_dev { #define ACCESS_SWAP 0x00000001 #define ACCESS_16BIT 0x00000002 +#define ACCESS_INTR_MASK 0x00000004 extern int i2c_dw_init(struct dw_i2c_dev *dev); extern void i2c_dw_disable(struct dw_i2c_dev *dev); diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 809579ecb5a4..f03ea71d6519 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -93,6 +93,7 @@ static void dw_i2c_acpi_params(struct platform_device *pdev, char method[], static int dw_i2c_acpi_configure(struct platform_device *pdev) { struct dw_i2c_dev *dev = platform_get_drvdata(pdev); + const struct acpi_device_id *id; dev->adapter.nr = -1; dev->tx_fifo_depth = 32; @@ -106,6 +107,10 @@ static int dw_i2c_acpi_configure(struct platform_device *pdev) dw_i2c_acpi_params(pdev, "FMCN", &dev->fs_hcnt, &dev->fs_lcnt, &dev->sda_hold_time); + id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev); + if (id && id->driver_data) + dev->accessor_flags |= (u32)id->driver_data; + return 0; } @@ -116,7 +121,7 @@ static const struct acpi_device_id dw_i2c_acpi_match[] = { { "INT3433", 0 }, { "80860F41", 0 }, { "808622C1", 0 }, - { "AMD0010", 0 }, + { "AMD0010", ACCESS_INTR_MASK }, { } }; MODULE_DEVICE_TABLE(acpi, dw_i2c_acpi_match); -- cgit v1.2.3 From e79e72c5a242fa21c971cfb40017f1039daf4d77 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Thu, 10 Dec 2015 13:48:43 +0200 Subject: i2c: designware: Keep pm_runtime_enable/_disable calls in sync On an hardware shared I2C bus (certain Intel Baytrail SoC platforms) the runtime PM disable depth keeps increasing over repeated modprobe/rmmod cycle because pm_runtime_disable() is called without checking should it be disabled already because of bus sharing. This hasn't made any other harm than dev->power.disable_depth keeps increasing but keep it sync by calling pm_runtime_disable() only when runtime PM is not disabled. Reported-by: Wolfram Sang Signed-off-by: Jarkko Nikula Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-designware-platdrv.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index f03ea71d6519..6b00061c3746 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -245,12 +245,10 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) } r = i2c_dw_probe(dev); - if (r) { + if (r && !dev->pm_runtime_disabled) pm_runtime_disable(&pdev->dev); - return r; - } - return 0; + return r; } static int dw_i2c_plat_remove(struct platform_device *pdev) @@ -265,7 +263,8 @@ static int dw_i2c_plat_remove(struct platform_device *pdev) pm_runtime_dont_use_autosuspend(&pdev->dev); pm_runtime_put_sync(&pdev->dev); - pm_runtime_disable(&pdev->dev); + if (!dev->pm_runtime_disabled) + pm_runtime_disable(&pdev->dev); return 0; } -- cgit v1.2.3 From b4cd08aa1f53c831e67dc5c6bc9f9acff27abcba Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Wed, 16 Dec 2015 20:05:18 +0100 Subject: i2c: rcar: disable runtime PM correctly in slave mode When we also are I2C slave, we need to disable runtime PM because the address detection mechanism needs to be active all the time. However, we can reenable runtime PM once the slave instance was unregistered. So, use pm_runtime_get_sync/put to achieve this, since it has proper refcounting. pm_runtime_allow/forbid is like a global knob controllable from userspace which is unsuitable here. Signed-off-by: Wolfram Sang Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/busses/i2c-rcar.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index b0ae560b38c3..599c0d7bd906 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c @@ -576,7 +576,7 @@ static int rcar_reg_slave(struct i2c_client *slave) if (slave->flags & I2C_CLIENT_TEN) return -EAFNOSUPPORT; - pm_runtime_forbid(rcar_i2c_priv_to_dev(priv)); + pm_runtime_get_sync(rcar_i2c_priv_to_dev(priv)); priv->slave = slave; rcar_i2c_write(priv, ICSAR, slave->addr); @@ -598,7 +598,7 @@ static int rcar_unreg_slave(struct i2c_client *slave) priv->slave = NULL; - pm_runtime_allow(rcar_i2c_priv_to_dev(priv)); + pm_runtime_put(rcar_i2c_priv_to_dev(priv)); return 0; } -- cgit v1.2.3